Ipod freezes using disk utility

I am yet another ipod owner whose ipod (40 gig 4th gen clickwheel) freaked out when I updated to the latest firmware and itunes.
My computer (new imac g5 running 10.4.2) asks to initialize my ipod when I connect. Disk utility freezes when I try to erase my ipod HD. Repair always ends in failure.
Is there another disk utility software (such as drive genius, diskwarrior, etc.) that I can use to fix my ipod's hard drive?
Before I invest the money, has anyone fixed their ipod this way or am I looking at permanent HD failure?

check this out: http://discussions.info.apple.com/webx?128@@.68b35181

Similar Messages

Reformatted ipod nano using disk utility - no longer works

Idiotically I decided to use disk utility to reformat my 8Gb iPod nano (5th Gen) as I wished to use it temporarily as a USB drive compatible with Mac and Windows. Now that I wish to use it again as Apple intended, I find that iTunes does not recognise it in the Source list.
It shows up fine on the desktop and when the iPod is charged, it always asks me to select a language, and then comes up with the menu screens (music, videos etc) but it is empty with no data.
I tried following the instructions in this support document http://support.apple.com/kb/TS3540 but was foiled at step 5 as I do not have the file they wish me to trash.
Any clues on how I might go about fixing this? I would very much appreciate any assistance!!
Cheers

Hello kismet_kracker,
Maybe trying reformatting it again via *Disk Utility* except this time, change it's file system type to Mac OS X Extended (Journaled) and see if that helps.
B-rock

Using Disk Utility to Erase an external drive freezes Disk Utility?

When I use Disk Utility to Erase an external drive, Disk Utility freezes indefinitely and the action is not performed.
How do I fix this?

To use it on your MBP you need to set the OPTION when you partition it so that it will be the Intel GUID partition scheme, then set the partition(s) you want.
If it is hanging or failing, that can be caused by bad sectors where the partition table has to be written. You might need to zero the drive. If you have a PC, then use Maxtor's tools to reformat and test the drive.
PPC Macs use one partition/format scheme, IntelMacs use another, and Windows a 3rd.

Cannot format iPod using Disk Utility

My iPod (5th Generation) has been displaying a -48 error for weeks, and i tried to follow the advice to format my iPod using Disk Utility. However, after leaving my iBook 1.2Ghz G4 on over night with Disk Utility erasing it, the little bar was still stuck on partitioning, never moving. What can i do?

try reset in iTunes. Then follow the steps in Jason Creasey's excellent procedure in the long thread ref Code -48. Good luck.

I erased my iPod nano with disk utility and tried to restore but I get a 1430 error and it never restores.

Ok so I tried to connect my iPod nano to my computer, but when I opened iTunes, the iPod automatically ejected. I thought that restoring it would fix that, but since I couldn't restore it in iTunes because it kept ejecting itself, I decided to erase it using disk utility. I read on here that it's possible to do that. So then my iPod said to restore in iTunes after I erased it, so I did, but it failed with an 1430 error. How do I fix it? Is my iPod destroyed for good?

Take a look at this support document regarding that error. iPod: Can't restore or update in iTunes with error 1415, 1417, 1418, 1428, 1429, 1430, 1436, or 1439 - Apple Support

TS2570 Question re: "Start from your Mac OS X Install disc; use Disk Utility"

I've worked my way through the step-by-step trouble shooting in the TS2570 article up to "Start from your Mac OS X Install disc; use Disk Utility". So far, every step results in the same outcome - my formerly trusty 2007 Intel duo core iMac (24") will not start up, freezing on a grey screen with a blinking question mark on a folder. I don't completely understand this next step. I have both a Leopard and a Snow Leopard disc. I'm not positive whether these were for the iMac, or my old Macbook Pro. I assume this makes a difference.

Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark appears when you start your Mac
A flashing question mark or globe appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by one or more of these:
a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
b. Boot drive's directory has been corrupted - Repair with Disk Utility.
c. Critical system files are damaged or deleted - Reinstall OS X.
d. The disk drive is physically non-functional - Replace the hard drive.
Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Why have my Ext. USB2 HD's Failed to Mount after using Disk Utility in 10.8.1 on Retina Pro

I am having issues with USB 2.0 External Hardrives and my 15inch Retina MacBook Pro running OS 10.8.1. I was able to read write to the drives fine prior to using disk utility to erase and reformat the drives. Both drives show up in the side bar of Disk Utility, but fail to mount. Both drives Verify and Repair without issue, but still fail to mount. I have tried switching USB Ports, powering on/off, etc. I tried seeing them through terminal, but they do not show.
I first lost my Lacie 500GB HD when reformatting it with Disk Utility. I gave me an error message, but I can't remember what it said.
Thinking my drive died, I plugged in a McAlly external USB 2.0 500GB drive that originally worked fine, but then locked the entire computer completely, forcing a power button reset after 10 min of total freeze. Now that drive is unusable as well and fails to mount.
I am unable to Partition either drive because they will not mount.
Any help would be appreciated.
Thanks,
Chris

I called Apple Support after getting no usuable help through the Apple Forums. The rep felt is was a problem with the two older USB 2.0 drives compatablility with the Retina Macbook Pro's USB 3.0. He kindly offered to send me a Compatable USB 3.0 Drive, but could not offer a solution.
FYI, I tried using different cords and both USB 3.0 ports on my Retina MacBook Pro and both are self powered.
Thanks,
Chris

My mac keeps freezing, the disk utility states the hardrive is failing

Hi. My desktop was upgraded to the snow leopard and has had increasing problems with freezing. Now it wont start up at all, so I have to open it with the Disk 1 OS.. then I went to the disk utility to try and repair it. But it says the hard drive is failing. When I did the hard drive test, it passed without any issues. I am confused and cannot restart my computer.

If by the "hard drive test" you mean the Apple Hardware Test (AHT) that you run by starting up the Mac into it, it is possible (but not very likely) that reformatting the HD using Disk Utility while booted from the installer DVD & then reinstalling the OS from the same source will set things right.
To do the reformat, select the entire HD & use the "Partition" tab to choose a new, single partition scheme from the popup.
But if you cannot even get that far, or the process fails, then your drive is dying, even if AHT can't detect it.

Unable to use Disk Utility to repair disk.

Hi all
I have been having some problems trying to transfer movies from computer to my iPod. Someone just suggested that I use Disk Utility to verify disk permissions, as well as the disk. I was able to verify disk permissions and repair them. Noticed the some had something to do with iTunes, so that might fix my problem with transferring movies to my iPod. I then tried to verify the disk, but I got the following error "Error: The underlying task reported failure on exit." Also this program shows that the following "Checking volume bitmap.
Volume Bit Map needs minor repair
Checking volume information.
The volume Macintosh HD needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair"
The <Repair Disk> button is not darkened, but is grey, such that is not an option. Any other way to repair this disk.
Thanks
Michael

The startup drive can only be repaired from another drive.
You have to boot from the install disk.
To do this: Insert the Install Disk 1 into the drive and then select Restart; when you hear the chime hold down C key until the apple logo appears.
This will take you to the installation software, but you do not want to install.
Select your language, then go up to the top menu bar to Utilities in 10.4 and navigate to the Disk Utility application.
Select the start up drive, then go to the First Aid pane where you can click on Repair Disk.
If it finds errors, repeat the process until it reports no errors.
After these repairs, quit the application, and restart normally.
Once restarted normally run Repair Permissions from the Disk Utility application found on your hard drive in Application/Utilities.

ITunes won't Restore after I allready have restored (using Disk Utility)

To anyone who may help, or who may have similar problem,
Having trouble with my iPod (5th gen 30GB).
Bought iPod 1 month ago. First time i plugged it in, it showed up as a Windows-formatted iPod on my Mac (using iTunes 7.1).
I couldn't restore the iPod from iTunes as the Restore (and Update) function was greyed-out in the Device Summary "Version" section.
Called up Apple Canada and they told me to restore using disk utility, which I did by using the Erase function.
Then plugged iPod back in. iTunes recognised it - as a Macintosh formatted iPod - and automatically reloaded all music onto iPod. Once upload complete though, iPod wouldn't play and instead now shows a "use iTunes to Restore iPod" screen.
Restore functions still unavailable in iTunes (Version section still greyed out) - though now says that "Your iPod software is up to date. iTunes will check..."
Tried holding down menu+centre button and centre button+play but no help.
Anyone any ideas?
Thanks
-Gael
5th Generation 30GB iPod Mac OS X (10.3.9) 12" Powerbook G4

Error 14 usually means that your antivirus or firewall is blocking the update. Try disabling your firewall.
Also, make sure you are connecting to a USB 2.0 (not 1.1)port directly on the back of the computer (not the front), and you are not using a USB hub or a USB port on the keyboard if there is one. This is worth checking but is not usually the cause of error 14.
When updating choose "download only" the first time. This separates the download process and the update process, so you can better diagnose where the problem resides.

Erasing Volumes using Disk Utility

I used Disk Utility to make copies of numerous cds and dvds. Doing this created a long list of volumes on my harddrive that I can not delete using erase or erase empty space (these fields are grayed out). I tried booting from the OSX disc however when I did that the volumes weren't even visibile. I also tried converting the disk images to a writeable format. All this did was make a copy of the existing volume. Does anyone know how to delete Volumes in another way, either using disk utiltiy or other software?
Thanks,
Dean
Macbook Mac OS X (10.4.7) disk utility, delete or erase volumes

If you are getting nothing for file system what has gone wrong is something in your computer/operating system, not on the iPod.
Try running Scandisk first, then formatting or, at this is not recommended generally, if that doesn't work partition the iPod and then format it.
But you might also want to consider a reload of XP. I reiterate, if it gave you nothing to select under file system this is most likely a problem with your operating system or USB chain.

Migration Assistant fails to recognize a Time Machine disk (itself migrated using Disk Utility)

So I outgrow my Time Machine disk. I listen to the advice (repeated in multiple places) that one can simply use Disk Utility's Restore tab, select the old time machine disk as source and the new one as destination, and click restore to copy block-by-block, then rename the disk.
This works very well. I have indeed been able to use Time Machine on the new disk without losing any of the history.
But now I am in trouble. I am also outgrowing my MacBook disk. I put a larger disk in and install Snow Leopard from scratch. Now Migration Assistant does not recognize the new Time Machine disk (perpetually spinning wheel). Renaming the disk to the old name does not help. M.A. does recognize the old Time Machine disk, but that means manually managing the changes (and giving up on the larger TM disk). I reinstall Snow Leopard and do not miss that time the option to restore from Time Machine, but it still does not see the new Time Machine disk.
How does one convince Migration Assistant to use a Time Machine disk that duly has Backups.backupdb as a root folder and where "ignore ownership on this volume" is not set?

Thanks, Pondini, but the Time Machine disk passes the Disk Utility repairs and only the spinning wheel was visible under both the Setup Assistant and the Migration Assistant.
I now have some good news, and some bad.
First the good news: Lion's Migration Assistant offers the option to copy user (and other) files from the previous OSX disk, not just the Time Machine disk. If this option was already in Snow Leopard, then I missed it.
Now the bad news..
I spent several hours reading (Pondini's and others') suggestions to ensure that my Time Machine is as seamless as possible, namely, for the next backup to be incremental. No luck: all user data are copied. Until the interface of Time Machine stops trying so hard to shield us naive users from making decisions on our own, one idea is to keep the iPod and pictures/video collection backed-up by the straight-forward rsync. Then whether Time Machine is really incremental will not matter, and in any case a spare copy of the documents you wrote by hand is nice in case the some blocks of the disk fail.
But I may have been the one who messed it. In Preferrences \ Time Machine \ Options... I excluded all users except the user "Admin" who restored the user accounts. The idea was to test first whether the mildest user will get a full backup. It may be that Time Machine does not look in the history to see if a given file or set of files already have some copy in the past. If a file does not exist in the very last backup, it is saved to the Time Machine disk.
If you're reading this and are keen on an incremental backup, try this: restore your user accounts using a user Admin, but do not start to backup until after the accounts are restored. Will the backup afterwards be incremental?

The difference between a .dmg file & a .cdr file (using Disk Utility) ?

Hi,
In particular, I created both from a DVD using Disk Utility.
When I chose "read only" a .dmg was created.
When I chose "DVD/CD Master" a .cdr was created.
They are exactly the same size.
Is there any difference ?
Thanks in advance.
Pat De Marco

HI Pat,
From Wikipedia: A file with the extension .dmg (an abbreviation for disk image) uses a disk image format commonly found on Mac OS X. The format allows secure password protection as well as file compression and hence serves both security and file distribution functions. Its most common function is the distribution of software over the Internet. When opened, DMG files are "mounted" as a drive within the Finder.
From: Wikipedia .cdr and ISO
ISO image
Filename extension .iso
Uniform Type Identifier public.iso-image
Type of format Disk image
Standard(s) ISO 9660
An ISO image is an archive file (a.k.a. disk image) of an optical disc using a conventional ISO (International Organization for Standardization) format that is supported by many software vendors. ISO image files typically have a file extension of .ISO but Mac OS X ISO images often have the extension .CDR. The name "ISO" is taken from the ISO 9660 file system used with CD-ROM media, but an ISO image can also contain UDF file system because UDF is backward-compatible to ISO 9660.
Carolyn
Message was edited by: Carolyn Samit

How do you use disk utility to burn a bootable .iso dvd?

Anybody have a clue on how you use disk utility to burn a .iso bootable dvd disk?
I'm trying to install windows 7 rc into virtual box in OS X 10.5.7 and cannot figure out how to do this. I've already installed the windows 7 beta in virtual box and was able to make a bootable dvd disk with the .iso file on it but have no clue how I did this.
I've been searching the web but most tips are for older version of OS X.
Thanks to anybody who answers.

It's so easy, You can just burn an .iso file using DVD Creator Std instead of Disk Utility, only 3 steps to finish bur ning your .iso files:
http://www.imediacreator.com/mac-dvd-creator-standard.html#131

HT1553 Does using Disk Utility also backup MSOffice 2008 (Mac) software already installed on my Macbook Pro with Snow Leopard? If not, how would I do that?

Hi,
I'm looking to upgrade from Snow Leapord (10.6.8) to the new Mountain Lion. Have a lot of applications and softwares that I would like to back up when installing the new OS, such as MS Office, Adobe Photoshop and Illustrator. Any ideas on what is the best way to do that.
I'm not too tech savvy, so a simple solution would be appreciated.
Thanks,
Shyam

If your not very tech savvy, I would have someone assist you in the upgrade process as your about to inflict major change on your life and computer.
There are some things to consider before you upgrade.
1: The age of your machine:
My advice has been if your Mac is less than two years old and has a dedicated graphics (not all only Intel HD 3000 or 4000 CPU graphics like the 13" has)) then you stand a very good chance of 10.8 (or 10.7) running fine on your machine.
In either case you need to check the specifications of your machine to see if it meets Apple's requirements, and unfortunately those requirements are a bit low, resulting in a slower machine when you upgrade.
https://en.wikipedia.org/wiki/OS_X_Mountain_Lion
https://en.wikipedia.org/wiki/Mac_OS_X_Lion
(note: 10.7 is no longer being sold via the AppStore, you should upgrade to 10.8, however some machines can't, you can call Apple Sales to upgrade to 10.7)
If your machine originally came with 10.5, I would say forget it. Mac's don't last forever and laptops usually have a life of about 4 years with normal use. Desktops last longer of course and can withstand more OS X upgrades if Apple allows it.
2: The age of your software.
10.7 and 10.8 will not run PPC based software of old like 10.6 does, also upgrading to 10.8/10.7 may require expensive software upgrades that can hit you unexpected. Consult this site and your other needed software and hardware drivers/software (for printers/scanners,custom keyboards/mice etc) BEFORE you upgrade the operating system.
http://roaringapps.com/apps:table
3: Carbon Copy Cloner or SuperDuper "clone" (payware)
Your OS X boot partition to a new/reliable, blank powered external drive and use Disk Utility to Repair Permissions on both afterwards. You can hold the option key down and boot from this clone drive to use the computer like before if your OS X upgrade fails and the machine gets bricked. You can also use Disk Utility to erase the entire internal drive and reverse clone if you find out the OS X upgrade is not to your liking.
Make sure all other drives are disconnected, like TimeMachine when cloning or upgrading OS X, thus when you reboot TimeMachine doesn't self update itself, which can lock you out from going back in time to restore from.
Note: If you have Bootcamp, you can clone that with WinClone (payware) to another drive and recreate Bootcamp later and restore it.
4: Some firmware updates can possibly "BRICK" your hardware
Firmware updates progress in a forward manner and can't be downgraded, so what sometimes occurs is a software error by programmers or a hardware glitch on your machine won't 100% cooperate with the firmware update and thus your machine will fail to function. Sometimes even a interruption in the OS X upgrade or firmware update process will cause the problem. When this occurs, a trip to a Apple Repair is in order and if your machine is out of AppleCare (3 years) or the 1 years standard warranty your looking at a very expensive logicboard replacement. At this time you usually consider the cost not worth it and rather spend the money on the newer machine, especially if it's 2-3 years old. This can come as quite a shock as you expected to pay $20 for a OS X upgrade and now have to buy a whole new machine.
You can't not upgrade the operating system for security and bug fixes, however you make sure you have AppleCare that will protect you for three years if such a hardware bricking occurs. If you don't have AppleCare you might want to reconsider taking the chance upgrading the operating system and thus the firmware.
AppleCare can be purchased within one year of the original machine purchase, it gives one 3 years of care from the date of machine purchase, not from the date of AppleCare purchase.
5: Market share of OS x versions (apx)
10.4 4.5% security updates > no
10.5 15% security updates > no
10.6 52% security updates > yes
10.7 30% security updates > yes
10.8 2 million upgraded so far, just released
6: Your decision to upgrade or not
It depends upon your computer technical ability, the age of your machine, your software investment and your budget.
Can you afford to pay for professional assistance if your upgrade doesn't go as expected? Are you in AppleCare?
Can you afford to pay for upgrades to third party software?
Can you afford the downtime while your machine is being repaired?
Can you live without the "new features" newer OS versions provide?
Does your hardware even support the newer features?
You might decide the upgrade is not worth it for your older machine and decide to ease yourself into a new machine gradually. I took this approach with my 2006 MacBook Pro, buying a Early 2011 model. I then upgrade to 10.7 on the older 2006 machine and glad I did, because it got bricked. Turned out 10.7 was a pretty awful upgrade and I was out of AppleCare, however 10.8 seems to be "normal" far as OS X upgrades go, some problems but not mass bricking of machines.

Ipod freezes using disk utility

Similar Messages

Maybe you are looking for