Ipod mic not working
My Ipod 5th Gen mic not working
- Make sure the mic hole is clear and unobstructed. It is the little hole on the back by the camera lens(if has back camera). For the 16 GB one without the back camera the mic hole is on the top edge near the center.
- Open the Voice Memos app and see if you see movement on the VU meter needle with changes in noise level trying to be recorded
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Similar Messages
-
Both internal and USB mics not working
Hi there, all. Long-time lurker, first-time poster. Starting last night, I have been having issues with microphone use on my iBook G4. Neither the internal mic nor my USB headset mic (Altec Lansing AHS302USB) are accepting input.
The internal mic's failure doesn't surprise me, as I have heard about the delicate nature of the wire connecting the internal mic from its position on the display down to the main computer. It's the USB mic that confuses me, since USB mics are what everyone seems to recommend that people use when the internal mic is on the fritz (thanks to other mics not working with Mac due to the line-in thing). Also there is the fact that I have used this headset with this computer for over a year with no significant issues until now, with both mics simultaneously failing.
There doesn't seem to be a problem with the headset's wires; I am still able to hear audio through the headphones quite well, and when I load my audio recording program (Audio In) and Sound Preferences, I can see the occasional blip of sound recognition when I move the USB adapter portion around in the port. These blips even occur when the pink microphone jack and headphones jack are unplugged from the adapter, so this suggests to me that the problem lies not with the wires, but somewhere in the USB adapter, port, or the computer itself.
I'm leaning toward the computer itself, since it just seems odd that both mics would just happen to stop working at the same time. That and the fact that audio output still works through the headset, and the USB ports work fine for other USB devices such as my external drive and iPod.
I have tried restarting, resetting the PRAM, and repairing permissions with Disk Utility. Nothing's working so far.
Does anyone have any idea what could possibly be wrong?
For reference's sake, I took a recording of the sound that results from jiggling the USB headset adapter in the port. It's very quiet, so you may need to turn up the volume a little bit to hear it. Again, these are the ONLY sounds that the mic is able to pick up currently.
http://animeutahime.com/temp/faultymicrecording.mp3
iBook G4 Mac OS X (10.4.10) 768 MB RAM, 37.7 GB hard diskJust to chime in here - I wonder if it's down to the software: I've recently updated to 10.4.10, and the internal mic seems to have stopped working.
One positive effect of the change to 10.4.10 is that my Griffin iMic no longer flips to 8-bit, 22khz recording when I plug it in.
Having said that, I really like to get my internal mic back up and running again.
iBook Mac OS X (10.4.10) 1.5gb RAM, 60gb hard disk -
IPhone 2G voice mic not working
Has anyone come across iPhone 2G voice mic not working (not being heard by the other person) but works fine on speaker phone and bluetooth headset. It has been working fine so far and suddenly developed this problem! Any help is highly appreciated….
I had that problem with my iPhone 3G after about 5 days.
I just had Apple take a look at it.
They cleaned it out, called it and stuff.
Didn't work.
Since I didn't drop it in water and it was not my fault in any way, they gave me a brand new one. -
Ipod does not work with new usb
i got my computer cleaned and a usb 2.0 pci card put in and now my ipod does not work with it, can anyone help
tell me what you mean and i will tell. i ask the guy in the shop to remove any viruses and put my files in order and also put winzip on, ad-ware se peronal and windows defender. and to install a usb2.0 pci card, so that i can put music onto my ipod faster. is this enough for you
-
Downloaded Update Software now Ipod is not working - Please Help
I downloaded Update Software onto Ipod and now Ipod is not working. It is stating "Itunes detected an Ipod in recovery mode. You must restore this ipod before it can be used in Itunes". Here's the deal I did that now the Ipod just blinks the circle with the line through it and says do not disconnect. Nothing happens. Has the new software corrupted my Ipod? Can anyone Help
Try the instructions here.
iPod is in recovery mode.
Message was edited by: Jeff Bryan -
My daughter is away at camp and ipod is not working and says it needs to be connected to itunes. She does not have her laptop with her. Can she sync to her itunes on someone else's mac?
Yes, when she plugs it in to another person's mac, tell it transfer purchases, then authorize the computer by going to store, and click authroize computer. If the iPod is in recovery mode
Then I don't think she can have her music apps etc. on there after she plugs it into the computer. If it just needs a charge
When iTunes opens on the computer, quit it, and do not let the iPod sync with the computer, just answer no or ignore to any questions asking if you want to sync. -
I tried updating my iPod, and ever since it has not worked at all. If I hold in the lock & home button, it will tell me to plug it into iTunes. Once I do that, it says it will restore but every time, restoring it fails. My iPod is not working at all, and I really have no idea what to do. It is just a black screen, and occasionally the white apple will appear as if it were turning on, but it won't turn on. I just need some suggestions on what to do!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My ipod is not working at all when i plug it into my laptop i get an itunes sign and below that plugin sign also it says new software found however it first asks me to install the software disc which i dont have it with me now can you plz check for the same and reply asap...please thanks.
The link I and Ingo provided included:
1. Remove iTunes and related components from the Control Panel
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
That is more than quicktime and iTunes. Follow all the instruction in the link for removing and reinstalling the Apple software. -
IPod (5G) and iPod (Classic) Not Working
_*iPod 5G:*_
I bought the iPod 5G 2-3years back ago. It was working all fine. Few months back I accidentally dropped the iPod. After this, the iPod was not working at all. None of the buttons works. But i am still able to put in on HOLD or even restart/put to disk mode. I am using it as a 80gb External Hard Drive.
*iPod Classic (120GB):*
I bought this iPod from Bangkok in December 2008. Later, in March, used to restart by itself and freeze suddenly when a track is being played. I had some tracks on it then. Whenever i try to play any track it showed the time 00:00 and started to play that particular track after this 'click' sort of sound from the inside, possibly from the hard drive. It even freezes during the RESTART process. So I had to bring it to a stable condition by restarting it during it is being restarted. My computer is not able to identify it. I have tried to restore it a couple of times now. Sometimes, I am able to get through the RESTORE process but most of the time my mac/ipod freeze together and wont come back to normal until and unless the usb wire is pulled out forcefully. Well, whenever iTunes recognizes it, I try to sync music. I have about 200 tracks in this one playlist. Whenever i try to sync it, the ipod freezes together with my mac. The sync process stops without copying all the tracks to my ipod. After that the screen goes black and then comes back with a dull APPLE logo displayed.
+Information on iPod Shuffle:+
My dad is going to Bangkok tomorrow. I asked him to get me a Shuffle. The new one that talks. I use the ipod mainly in my car (using the aux). There are no buttons on the Shuffle as everything in situated in cable of the ear phones. How am i going to use the controls if my connect the AUX (from my car's stereo) to my iPod? I wont be able to change tracks, pause or even shut down the ipod. Another thing is that whenever the ear phone plug is disconnected from the ipod, while it is playing a track, the track gets automatically paused.
This is very long, consumed a lot of time for you to read/for me to write. I guess making it longer would help me to kill time as I am running a ZERO OUT format on the 2nd ipod I own. :P
Thank You,
Samin
Message was edited by: samintasibThe classic bought in December 2008 would still be covered by warranty. Have you arranged for service for it?
-
My Ipod is not working, It was working find and suddenly it does not turn on anymore. It does not responde when it is plugged in. I can see it is not the first case, somebody has received an answer that works? Some similarities in the ipods? thanks for your help.
Have you tried a reset?
iPod touch User Guide (For iOS 4.3 Software) -
IPad 2 3G 64 mic not working from factory, do you have any idea ?
Hi
I have iPad 2 3G 64 , it works prefect but when I use cam for record video there is problem in mic . Mic not working so no sound in video .
I try to use any app from apple store to test mic but still not work also I try to update the device to 4.3.3 when I finish from update again same problem with mic, I used this iPad for one month
I think this problem from hardware not from software .
Please tell me what i have to do with this problem .Hi
I have iPad 2 3G 64 , it works prefect but when I use cam for record video there is problem in mic . Mic not working so no sound in video .
I try to use any app from apple store to test mic but still not work also I try to update the device to 4.3.3 when I finish from update again same problem with mic, I used this iPad for one month
I think this problem from hardware not from software .
Please tell me what i have to do with this problem . -
Applets in my ipod is not working.please help.
applets i my ipod is not working.it opens and after a few seconds shuts automatically.
- Reset the iPod, nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Purchase/install any new app
- The remaining items of:
iOS: Troubleshooting applications purchased from the App Store
- Last, restore the iPod -
Please Help. Ipod Screen Not Working
My screen on my ipod does not work any more.
I have tried restoring/updating it.....everything!!
problem is this is my second due to a faulty battery on the first which apple exchanged free of charge for me so I ma not sure if I am entitled to another ipod or what!!!
If anyone knows how to get the screen working or about 2nd exchanges then please help,
Thanks,
Louise xIf you truly have tried resetting/restoring, then it's time for service. Is it still under warranty, because if so, it won't matter that you have had one exchange already?
-
IPod Classic not working in car but works everywhere else. Troubleshooting?
My iPod is not working with my Infiniti iPod jack but all other iPods work fine with the in-car system. My iPod synchs fine to my Mac and to an external stereo player through the connector on the bottom of the unit. So it looks like both units work fine with any iPod, but only my iPod will not work with the car while it does work with other connections. How can I troubleshoot this? Thanks for any help.
BTW, the Infniti is a 2008 G37 and the dealer just put a brand new unit in it and the same thing happened. The iPod is a 2008 80GB Classic.
Heeeelp!!!!I have the same problem with my infiniti G37. Soo frustrating!
-
my iphone ipod is not working not able to hear any kind of music...help me out
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Has any of this been tried?
Maybe you are looking for
-
How can I open files from Appleworks and Pages 4.3 in Mavericks?
I have documents I created in Appleworks and Pages 4.3 that I can't open in Pages 5.1 using Mavericks. How can I open those files?
-
How can I find out if my mac mini running snow leopard can be upgraded to mountain lion?
I have a mac mini with sufficient ram for the mountain lion OS however, I am unable to determine if the machine was created in early 2009. Is there a way to make sure my machine will take the upgrade without purchasing the operating system first?
-
Using TextInput boxes to change to small Caps lettering with NO ....
Using two TextInput boxes (fName and lName) which are writting at the same time over to a (fullName) Text box, BUT change the data in here automaticly to 'small Caps' lettering with NO spaces. I'm finding all sort of things but nothing close enough.A
-
IDOC from ECC to XI not coming
in a XI scenario, IDOC is being sent from ECC to XI, in ECC, tcode- we05 i can see the IDOC status as 03 (Green), but it has not reached XI, this problem occurs sometimes, i mean to say, for the same scenario, sometimes IDOC comes properly, sometimes
-
BOM Validity - Using Engineering Change Management
Hello All, We are currently reviewing the ECM functionality to assistn in BOM validity maintenance. I have made the necessary changes in SPRO to activate this functionality. My initial testing utilizing the Change Master and associating it with the B