Ipod nano(6th generation) it is not recognised in itunes.. it says it cannot recognise this device completely..try unistalling and re-install itunes.. i did but it still doesnt.. even my ipad is not recognised in itunes,.. wat shall i do ..pls help me ...

ipod nano(6th generation) it is not recognised in itunes.. it says it cannot recognise this device completely..try unistalling and re-install itunes.. i did but it still doesnt.. even my ipad is not recognised in itunes,.. wat shall i do ..pls help me ...

Did you uninstall iTunes and all other Apple related software using the instructions in this Apple support document?
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
B-rock

Similar Messages

  • HT4235 iPod nano 6th generation, syncing with audiobooks does not work now, had been working.  Sync test says:  No iPod touch, iPhone, or iPad found.  Connectivity test OK, no physical problems, iTunes shows the iPod.  Any clues what to do?

    iPod nano 6th generation, syncing with audiobooks does not work now, had been working.  Sync test says:  No iPod touch, iPhone, or iPad found.  Connectivity test OK, no physical problems, iTunes shows the iPod.  Any clues what to do?

    Hmm.. Thank you for the response.
    Have you tried using the iPod with another user account or computer, to help narrow down whether the problem lies with the computer, account, or the iPod itself?
    Maybe try reformatting it, using the tools provided by Windows. Instructions on how to reformat your iPod can be found in this article.
    http://www.methodshop.com/gadgets/ipodsupport/erase/index.shtml
    B-rock

  • My iPod's OFF/On switch is not working and I have checked over internet that this problem is very common with iPod Nano 6th generation, my iPod is now out of warranty period. What shall i do now?? Please Suggest!!

    My iPod's OFF/ON switch is not working and I have checked over internet that this problem is very common with iPod Nano 6th generation, my iPod is now out of warranty period. What shall i do now?? Please Suggest!!

    You can do an out-of-warranty replacement at an Apple Store for a fee, get a 3rd party site to repair it, sell it for parts, or get a new one.

  • HT1459 MY IPOD NANO 6TH GENERATION WILL NOT TURN ON I GOT IT FOR CHRISTMAS AND PLAYED THE RADIO ON IT WITH OUT PLUGING IT INOT ITUNES AND I WAS WONERING HOW TO FIX IT ?

    hi my ipod nano 6th generation will not turn on what should i do ...no batery left and never pluged it into itunes

    Hi meganisawsome,
    If your iPod will not turn on and you are getting indicators that there is no battery left, the first step would be to make sure that the iPod has been charged correctly. You may find the following article useful:
    Apple Support: Charging your iPod battery
    http://support.apple.com/kb/HT1384
    If you are still having issues after charging, you may want to look at this article:
    iPod nano (6th generation): Hardware troubleshooting
    http://support.apple.com/kb/TS3474
    Regards,
    - Brenden

  • I have an iPod nano 6th generation and I downloaded 3 music videos but they won't play on my iPod. They only play on my laptop/iTunes. How can I get it to work?

    I have an iPod nano 6th generation and I downloaded 3 music videos but they won't play on my iPod. They only play on my laptop/iTunes. How can I get it to work? I know that my iPod should take music videos because there is a pre-made playlist called "Music videos". Can anyone help me please????

    You can sync the music videos, but they won't play on your 6G Nano, because it does not support video playback. Sorry.
    B-rock

  • ITunes and my Mac don't recognize my iPod Nano (6th generation) under devices?

    iTunes and my Mac don't recognize my iPod Nano (6th generation) under devices? I have tried rebooting/resetting and reinstalling iTunes already. I have also checked the ports and cables, what can be done?

    Try here.
    iOS: Device not recognized in iTunes for Windows
    Could be your security software and firewall preventing iTunes from recognizing your iPod.
    Disable antivirus software
    Turn Windows Firewall on or off

  • When i plug in my ipod nano (6th generation) a message comes up saying it's 'detected but not identified' i've spend like all day trying to solve it, uninstalled it, reinstalled it and nothing seems to work..

    when i plug in my ipod nano (6th generation) a message on itunes saying the ipod is 'detected but not identified'- i've spent all day trying to fix it and nothing seems to work so i can't sync any songs..

    Hello beafraser,
    Here's an article to help troubleshoot when your iPod is detected but not identified.
    iPod nano: Error message saying that iPod 'could not be identified properly'
    http://support.apple.com/kb/ts3218
    Hope that helps.
    Thank you for visiting Apple Support Communities.
    Nubz

  • My ipod nano 6th generation will not turn on.

    My iPod nano (6th generation) will not turn on. I have charged it (attached to my computer) for 30 minutes. I have tried to reset it (held down Wake and Volume Down for 8 seconds)- no response. I have factory restored it (through iTunes)- no response. It shows up as connected to my computer and will sync in iTunes, but the display on the iPod will not turn on. Any ideas?

    Hey s.mccarter2010,
    Thanks for the question. After reviewing your post, it sounds like you have tried a lot of things and the iPod still will not turn on. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    iPod won't turn on
    If you have tried the solutions above and iPod still won't turn on, check the following:
    Make sure iPod is the only device in your FireWire or USB chain. Disconnect everything but the mouse, keyboard, and your iPod, then see if it will turn on.
    Make sure you are using the FireWire or USB cable that came with your iPod, and that the cable is in good condition.
    Try connecting iPod to the built-in port of a different computer to see if that works. Note: If using a portable computer, make sure it is plugged in to a power source and that the lid or display is open. If the lid is closed the computer may go into either standby, sleep, or hibernation mode and iPod will not charge properly.
    If you still can't turn iPod on after performing these steps, it may need to be repaired. You can arrange for repair at the iPod Service Website.
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • My iPod Nano 6th generation no longer shows up on iTunes

    how do I reconnect my Ipod Nano 6th generation to my iTunes?

    Hello MariaEugenia1962,
    We've an article that can help get iTunes speaking with your iPod again.
    iPod not appearing in iTunes
    http://support.apple.com/kb/TS3716
    Cheers,
    Allen

  • I have Ipod Nano 6th generation.  My computer recognizes device but Itunes doesn't.  Any suggestions?

    I have Ipod Nano 6th generation.  My computer recognizes device but Itunes doesn't.  Any suggestions? 

    You might have better luck posting in the iPod Nano forum.  You posted in the iPod Touch forum. For an iPod Touch one would start here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • IPod Nano 6th generation is decteded but could not be identified - help!

    I have a iPod nano 6th generation and until this morning it worked fine with iTunes
    Today when I plugged it in I get the following message...  iPod is detected but could not be identified properly...
    I have already
    1. reinstalled iTunes
    2. Tried other USB wires
    3. Restarted the computer
    HELP!!!!

    1. reinstalled iTunes
    Doublechecking. Have you tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

  • IPod Nano 6th generation won't sync with iTunes.

    I replaced the battery in my iPod Nano 6th generation and now it won't sync with iTunes. It shows in the list as iPod recognises that it is in recovery mode, so advises to restore. Press the restore button and after a time a message says can't find the iPod

    do you ever unplug your iPod without ejecting it first?

  • My ipod nano 6th generation is not working anymore :( HELP

    I have an ipod nano 6th generation. Was working perfectly. One day I wake up and is showing me a screen I have never seen  before..It reads:N20 Snowfox 4A0432
    When I plug it, itunes doesnt recognize it. It recognized it once but it says problem 1621 and I follow the instructions but still my ipod is frozen and not even my computer can read it.
    I really miss my music for my morning run!

    Have a look at comment # 4 and 5 on this page iPod nano 6G diagnostic mode to get it out of this mode again.
    Pressing the volume minus button and power button should help.

  • My ipod nano 6th generation will not work connected to my car radio?

    my ipod nano 6th generation will not work connected to my car radio? My wife's ipod nano 4th generation works perfectly.

    Hey CorineNL,
    If your iPod not recognized by iTunes or computer, I would follow the directions here:
    Follow this troubleshooting assistant.
    Also see these articles for further assistance:
    iPod not recognized in 'My Computer' and in iTunes for Windows
    iPod not recognized in iTunes and Mac desktop
    from: iPod nano (6th generation): Hardware troubleshooting
    http://support.apple.com/kb/TS3474
    Welcome to Apple Support Communities!
    Best,
    Delgadoh

  • IPod Nano 6th Generation Not Charging/Holding Charge

    Hi.
    My iPod Nano 6th generation will not charge or hold a charge. I plug it in and it will turn on for about 30 seconds or less and then die. It will then continue to turn on and die unless I unplug it in which case it will die and not turn on. Any advice/suggestions and/or help finding what is wrong would be greatly appreciated. Thank you in advance.

    hold down the enter button for 5 secs then plug into wall while still holding it down.

Maybe you are looking for