IPod: Screen Freeze, Loud Humming Sound

With two different 8 GB iPhone's, I have experienced the same freeze while using the iPod feature. When I began to play a song, the iPhone froze on the album art screen of the song playing and played a loud humming sound that could not be shut off without a soft reset.
Unfortunately, the soft reset took over one minute to shut the phone off, and the loud humming sound cannot be shut off until the phone powers off. Has anyone else experienced this problem, and has anyone identified how to prevent the phone from freezing like that in the iPod mode?
Thanks!

There is a bit more errror information available if you can read out the full kenel panic log and post the TEXT here.
Readers who study these things will come along and help determine possible causes. If you are getting multiple kernel panics with no underlying trend, that can be caused by RAM memory problems. The Mac Pro (65lb tower) uses Error Correcting Code (ECC) Memory, so its memory symptoms are quite different.
Mac OS X: How to log a kernel panic

Similar Messages

My mac makes a loud humming sound

My mac makes a loud humming sound when i turn it on. The sound is from the base of the MAc and it sometimes get really hot.

Resetting SMC as well as blow out the dust could solve the problem.
Intel-based Macs: Resetting the System Management Controller (SMC)

IPod Screen freeze

Every time when I listen to music with repeat on for 30mins. The iPod screen would go gray and when you touch the circle it wouldn't light up but you can still see the time and it wasn't on hold. It would usually happen after the song is over. I had to restart the iPod in order for it to work again and choose the song, but it'll end up happening again.

This almost exact same thing has been happening to me. When I play this one game and don't play the game that I saved the last time I played and try to start a new game my ipod screen turns grey with an apple on it. If I try to do the same thing again it restarts itself. Also sometimes my ipod just freezes and I am getting sick of it. I'm thinking of contacting apple and asking them about it.

My ibook G4 won't start it shows black screen and loud fan sound only

my ibook G4 won't start, after you press the on key it makes a loud air sound, almost like a kernel panic sound, no screen light just the sound, it will turn off by pressing the on key again. Is there anything I can do to get it on?

Your very welcome.
You would need to apply pressure to the left side of the track pad about 2cm out. I found applying pressure to both sides of the track pad more successful. All you have to do is push down on the case, while making sure your iBook is on a flat surface. If you have someone willing to help you, you can get them to apply the pressure while you back up your files. Other methods would involve tempory repair or removal of the hard drive. If you remove the hard drive to be read by another computer, you would need a cady to put the drive into. These caddies are cheap enough. Would suggest you use a USB cady and plug your drive into that, which would act as USB external drive. I'd suggest you get a USB cady to remove your files, be careful to what operating system you have on the computer you are using to get the files off. Windows OS won't read a MAC OS X drive (extended journal format) It would need to be another Mac or a Linux PC.
If removing the hard drive is something your not to confident in doing, you could alway pay a computer repair shop to remove it for you. (Maybe they would have a USB cady for a 2.5 IDE hard )
Here is a link giving further details about this chip solder problem.
http://macintoshhowto.com/hardware/how-do-i-get-my-broken-g4-ibook-fixed.html
Here is an example of a USB cady
http://www.amazon.com/SANOXY-External-Enclosure-Case-Laptop/dp/B000FNBYKW/ref=sr _1_sc_13?ie=UTF8&qid=1338742155&sr=8-13-spell
Let's hope just applying enough pressure is enough to get your files back up.
Best of luck!

Ipod screen freezes for 30 seconds but continues to play music

I mostly use my ipod while I run. This means that concurrently I have music playing and the stopwatch feature working. They both work well together, but at least 2-3 times during a run, my screen will freeze if I attempt to skip a song or record a completed lap for the stopwatch.
When the screen freezes thanks to my pressing either the left/right or center buttons, the music continues to play but it takes approximately 30-45 seconds for the ipod to respond to what I did. Fortunately, the stopwatch doesn't stop counting the seconds, so I don't lose the time I am tracking. It's really frustrating to not be able to change a song when I want or record a lap.
I have restarted the ipod a few times but have never completely restored it.
Has anyone had this problem and can offer a solution? I get so frustrated by this during my runs!
Thank you.

I mostly use my ipod while I run. This means that concurrently I have music playing and the stopwatch feature working. They both work well together, but at least 2-3 times during a run, my screen will freeze if I attempt to skip a song or record a completed lap for the stopwatch.
When the screen freezes thanks to my pressing either the left/right or center buttons, the music continues to play but it takes approximately 30-45 seconds for the ipod to respond to what I did. Fortunately, the stopwatch doesn't stop counting the seconds, so I don't lose the time I am tracking. It's really frustrating to not be able to change a song when I want or record a lap.
I have restarted the ipod a few times but have never completely restored it.
Has anyone had this problem and can offer a solution? I get so frustrated by this during my runs!
Thank you.

Ipod makes a clicking/humming sound

I just bought a 80gb video ipod a week ago and i just recently noticed that when i use the controls or when it finishes playing an album, I can hear a faint clicking and humming sound. I'm assuming this is the internal hardrive but it does it quite often. Is this anything to worry about?
Sony VAIO notebook Windows XP

I get the same thing when playing videos. I'm really frustrated with this...when i fast forward twice in a video, it makes these clicking sounds and after the 3rd one, the Ipod crashes. It's really annoying, I should have waited for the zune if this is the case. There were no recent updates on the firmware since I bought my new 30 gig in the apple store. No freaking firmware realease, everybody thinks that it'll be fixed with an new firmware update, but they never did have any new updates since the 5th gen release. SOB. I hate this product!

Ipod was freezing now it sounds like the HD is racing

hi, i have a 30gb click wheel ipod and have had nothing but problems. the ipod was freezing constantly and had slow responses to the click wheel. now, the ipod is making a continuous noise, similar to a vhs tape being rewinded. i am assuming it is the hard drive. i tried the 5 steps but the ipod wont reset,,,etc. at times the ipod will play music, but it will be the first song and i have no controls,,,when i hook it up to the firewire itunes doesnt recognize the player,,,what do i do at this point
30gb click wheel Windows ME

did this happen after downloading the 1-10-2006 update?

Touch iPod screen freezes each time try to start an app, I've tried to reset, it still is frozen

I tried to reset the touch ipod as directed on the troubleshooting website to no avail.
The frozen image is still on the screen, what else can I do?

- Connect to the computer and try to restore via iTunes.
- If screen still frozen, let the batter fully drain. After charging for an hour try the reset and restore again.

Why does my ipod screen make a cracking sound but there are no cracks?

i need help!!!!

I have no idea. Make an appointment at the Genius Bar of an Apple store and discuss/demonstrate it.
Apple Retail Store - Genius Bar

Screen freezes when shutting down with sound running

I have Windows 2000 with GF4 and Audigy2 ZS. I installed the latest WinDVR and tuner drivers and watever from the web. The card works fine, like I can watch TV and stuff, but when I try to close the program, the screen freezes and the sound keeps on running at the background. I have installed the latest directx drivers, video drivers, sound drivers and windows update... Please help

If your PC has an Intel Pentium 4 with Hyperthreading turned on please read my post re. problems with this configuration.

Humming sound from Mi

I recently upgraded to firmware version .0.02. My Micro was working fine till I turned it on from "deep sleep" (more than 4 hours) this morning. It froze on the "Zen Micro" screen and produced a loud humming sound (ZZZZZZZZ) through the earphones. I took out and reinserted the battery to reset the player and turned on the player. This time it froze at the "Rebuilding Library" screen and still produced the humming sound. I left it alone till I came to work and connected it to my computer and it rebooted, rebuilt the library and started working fine. I doubt it's a low battery problem because when it started working, it had 3 bars left.
Anyone else facing this problem? Hope it does not happen again...

There is no fan in hard drives. However, given there are rotating platters it is possible to get what is much like a blowing sound from them. It's actually the noise of the spindle bearings and is a rather distinctive rotation sound.
Depending on the volume of this noise Apple may or may not do anything about it as it's very subjective. Having sensitive hearing I find that most drives make some spindle bearing noise or other. In a quiet room I can distinctly hear mine.

SyncMaster 931BW Humming Sound

Hi,
I successfully connected my SyncMaster 931BW monitor to my MacBook, but (after setting the correct resolution and frequency - 1400x900 @ 60Hz) I get a humming sound which I don’t get if I connect the monitor to my regular computer (a PC in the process of replacement). The picture on the monitor is great (although fonts look better on the laptop’s screen) but the humming sound is very annoying. Does anyone know how to fix this? Any help would be very much appreciated.
I should note that when I check the information tab under the monitor’s settings, it tells me that it’s actually running at 59Hz, but Leopard tells me it’s running at 60Hz.
Thank you

Sometimes these types of noises are related to the power conversion electronics inside the montior. Noises like that can come and go based on the load on the power supply. That could explain why you hear the noise with a Mac and not a PC. The two could be presenting different loads based on settings or even different screen content.
You could try changing the brightness setting when connected to the Mac and see if that reduces or eliminates the noise. If it does, hopefully you can find a compromise setting you can live with.

Satellite X200-191 = Laptop turns on 4 seconds, black screen,humming sound

_*Satellite x200-191*_
Core2 Duo T7700
*Original:* 1024MB + 1024MB Memory 667MHZ / 512MB VRAM *Replaced:* Kingston Kingston KVR667D2S5/2G (I have this 2x)
*Original:* 200GB + 200GB Harddisk Drive (4200RPM) SATA *Replaced:* Only 1 HDD left, other one I will get back in 2 days.
17 WSXGA+ TRUBRITE TFT Screen
HD DVD-ROM Drive
56K Modem / Lan
W-Lan (802.11 A/G/N)
1/3MPixel Web Camera
Bluetooth
Microsoft Vista Home Premium 32 Bit
_*My Problem:*_
I take out the battery, plug it in the power. Charging light turns on.
I press the power button, power led turns on. Followed by the hdd led turn on, which blinks real quick, stays on for 1 second, then turns of. The power led stays on during all the time.
2 seconds after the power button, a fan starts blowing, while the above mention hdd led blinks for 1 second, 2 seconds after the fan starting to blow, it turns off.
We are now 4 seconds farther, pretty much, everything stopts, except a very tiny minor humming sound. (I just left it on for a couple minutes, sound remains, nothing happens.) (While writing this all I left it on for 10 minutes, the laptop heats op a bit, the adapter gets hotter, but still only the very tiny minor humming sound.)
+So my laptop works for 4 seconds, wont give any screen (black screen) wont load even BIOS. What could be wrong ?+
_*Fixing?:*_
Ok so I left the laptop after a couple of months, being told it was dead, just getting it dusty. (Read history to get this)
But since last week, I figured its getting dusty, I never opened a laptop before, why wont I try doing that.
_+*I replaced the Memory modules, Slot A and B , both memories , same time, one at a time, all possible ways.*+_
_+*Since I have only 1 HDD, I used it in both slots. Looks to no difference. Using NO HDD, I do NOT have the very tiny minor humming sound!!!*+_
I followed a guide [http://www.irisvista.com/tech/] to open my laptop, to see what is inside.
Finding no lose plugs, but did find a certein oil, and some white paste.
Closing the laptop, to try it out, I accidently screwed a couple wrong screws in the laptop, piercing the top cover of my laptop, but no chips were hit during this :P (Yeah, Im a bit to strong, I should have figured using force for a couple of the screws wasnt the best thing I could do, but now i know :p)
*SOOO* My question, while I wait for the extra old HDD (getting it in 2 days). (Probably making no difference)
What could be wrong, more precisly. Should I like try taking out the video card or something ?
Is there something I should do with some soldering?
Any tips/tricks that could work, wether to fix the laptop, or to narrow down the problem , to a small part which i could replace ?
BEST REGARDS
Danny Visser
The Netherlands
_*History:*_
Not sure if this is any important, but just to let you know, if intrested what happend all to the laptop ;)
I bought the laptop at Shape Computers (in the netherlands) Asking this laptop mentioned above, with 2 things changed. I wanted more Memory, and I wanted windows XP. The shop told me this was possible. They bought me the laptop in, they replaced the Memory with the kingston memories. They installed windows XP instead of the Vista. They laptop did work at this very moment. So I bought the working laptop, with 1 year warranty.
With the folders extra given with the laptop, I was able to increase my warranty from 1 to 2 years for free, so I did.
After probably a couple of weeks I noticed that the laptop was getting real hot, after longer usage. But according to the manual this was normal.
I did use the laptop for gaming, but also 2 months for a gaming study. So I did take it several times to school in a backpack.
After not using it for school anymore I reinstalled Windows Vista 32 BIT
At a very point not sure when precisly I noticed that it wouldnt turn on (probably same problem as I have now) but I was really relaxed about it, tried it later, and somehow it did work again. This happend perhaps about 5 times in total.
Knowing something was wrong, I took it back to Shape Computers. They checked it. (Not showing me what they did to it) But they told me I had nothing to worry about.
After about 2 years I actually sold this laptop to my mom. She used it a couple times (she is like realy noob, just about computers in generally, not even knowing if she should double click icons or not) She took it with her a couple times on trips, and they after about 2 years and 2 months ... this problem happend.
My mom knows a guy, and a friend of that guy, works alot with broken laptops, which told me that the problem was the _+motherboard+_.
I decided to take it back to the shop. After a long progress being down there (about 6 to 8 weeks)(Me going to the shop like 15 times). The shop managed to tell me it was the motherboard. That the motherboard couldnt be fixed and that a new one would be way to expensive.
+(I Known at this very point, after getting the motherboard back, that this laptop was not screwed open yet. The screws were still brand new.)+
Funny information(not for me), during this period of about 8 weeks, they actually told me lies like ... I left a message at your voicemail, I DONT HAVE A VOICEMAIL ... sorry for the caps but im still xxxxxx about those lies.
So still believing the shop ... my laptop is gone .... dead ... but then since last week, I started looking into the laptop myself ...(Fixing)

Ok, the company did not reply at all ... I ended up sending another email. And they did reply with a automatic message. Now weeks later still nothing more then that auto reply.
While I was waiting I contacted another guy that knows alot from these laptops. Getting a new part would cost me about 300 euros, and thats just the part, not even replace time.
Considering the toshiba help I have gotten ... (pretty much none) in these last years.
I declare my laptop dead. And decide at this very moment, that I (ofcourse) never will buy toshiba hardware again.
I might pay a bit more at my Dell computers, but the support in the last 8 years with 5 different computer systems and 1 laptop. Has been perfect in compare to the toshiba support I have gotten in the last 3 years, which just fails.
Thx tho all you guys for the replys.
Danny Visser

My ipod keeps freezing up between screens

My ipod keeps freezing up between screens.. it won't reboot... the only way i can fix it is to let the battery die and recharge it...
Message was edited by: bambie

When your iPod freezes, it's not necessary to wait until the battery drains, you should just be able to reset it. If the freezing persists, then try restoring it.
Yes, you should be able to get it serviced under the warranty if the fault persists.

T410 random beep sound( from machine for less than 5 mins) + screen freeze + Blue Screen (some time)

I have new purchased T410 during christmas time.
here is my machine spec(everything from Levono, did not upgrade any parts):
T410, model 2516CTO
8 GB RAM
i7 CPU
500GB HDD
Integried graphic card
Windows 7 professional (applied all latest updates)
Problem random happen, for about 8 times,
System works regularly
and all of sudden machine make continousely "beep" sound(from machine, not speaker),
after that screen freeze,
and then sometime system go back to normal, sometime crash completely to blue screen(most time).
The whole problem takes about 3-5 mins.
1 time it even happen in safe mode (after log in, desktop freezed immediately, then blue screen).
I chkdsk the whole disk found no problem.
I call Lenovo tech support, he ask me restore the original OS(Windows 7 home prim), then he can help me.
I refused because that's mean i have to destroy all the work I done (spend almost a week to install development tools and software) .
Since the problem is random anyway, I just reboot and bakeup more offen. :-(
I used Thinkpad since IBM time, never have problem with previous 2 T Series machines, but this one, not happy.

Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\FreezeIssue\Minidump\010111-51090-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
WARNING: Whitespace at start of path element
Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols;
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0xfffff800`02c18000 PsLoadedModuleList = 0xfffff800`02e55e50
Debug session time: Sat Jan 1 14:53:03.162 2011 (GMT-5)
System Uptime: 0 days 0:29:01.004
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
*                        Bugcheck Analysis                                    *
Use !analyze -v to get detailed debugging information.
BugCheck F4, {3, fffffa8008159060, fffffa8008159340, fffff80002f935d0}
Probably caused by : csrss.exe
Followup: MachineOwner
2: kd> !analyze -v
*                        Bugcheck Analysis                                    *
CRITICAL_OBJECT_TERMINATION (f4)
A process or thread crucial to system operation has unexpectedly exited or been
terminated.
Several processes and threads are necessary for the operation of the
system; when they are terminated (for any reason), the system can no
longer function.
Arguments:
Arg1: 0000000000000003, Process
Arg2: fffffa8008159060, Terminating object
Arg3: fffffa8008159340, Process image file name
Arg4: fffff80002f935d0, Explanatory message (ascii)
Debugging Details:
PROCESS_OBJECT: fffffa8008159060
IMAGE_NAME: csrss.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 0
MODULE_NAME: csrss
FAULTING_MODULE: 0000000000000000
PROCESS_NAME: csrss.exe
EXCEPTION_RECORD: fffff8800a977b78 -- (.exr 0xfffff8800a977b78)
ExceptionAddress: 0000000077a8592d
   ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
   Parameter[0]: 0000000000000001
   Parameter[1]: 0000000002ea0ef8
Attempt to write to address 0000000002ea0ef8
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
CURRENT_IRQL: 0
ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
EXCEPTION_PARAMETER1: 0000000000000001
EXCEPTION_PARAMETER2: 0000000002ea0ef8
WRITE_ADDRESS: 0000000002ea0ef8
FOLLOWUP_IP:
+0
00000000`77a8592d ??              ???
FAULTING_IP:
+0
00000000`77a8592d ??              ???
FAILED_INSTRUCTION_ADDRESS:
+0
00000000`77a8592d ??              ???
BUGCHECK_STR: 0xF4_C0000005
STACK_TEXT:
fffff880`0a9770f8 fffff800`03014652 : 00000000`000000f4 00000000`00000003 fffffa80`08159060 fffffa80`08159340 : nt!KeBugCheckEx
fffff880`0a977100 fffff800`02fbd3e3 : ffffffff`ffffffff fffffa80`0ab4f060 fffffa80`08159060 fffffa80`08159060 : nt!PspCatchCriticalBreak+0x92
fffff880`0a977140 fffff800`02f4580c : ffffffff`ffffffff 00000000`00000001 fffffa80`08159060 fffff6fb`00000008 : nt! ?? ::NNGAKEGL::`string'+0x17946
fffff880`0a977190 fffff800`02c87993 : fffffa80`08159060 fffff800`c0000005 ffffcbdb`afa4f658 fffffa80`0ab4f060 : nt!NtTerminateProcess+0x20c
fffff880`0a977210 fffff800`02c83f30 : fffff800`02cc2dbc fffff880`0a977b78 fffff880`0a9778e0 fffff880`0a977c20 : nt!KiSystemServiceCopyEnd+0x13
fffff880`0a9773a8 fffff800`02cc2dbc : fffff880`0a977b78 fffff880`0a9778e0 fffff880`0a977c20 00000000`02ea2180 : nt!KiServiceLinkage
fffff880`0a9773b0 fffff800`02c87d82 : fffff880`0a977b78 00000000`000116e4 fffff880`0a977c20 00000000`02ea1c58 : nt!KiDispatchException+0x53b
fffff880`0a977a40 fffff800`02c868fa : 00000000`00000001 00000000`000116e4 fffffa80`079c2201 00000000`77a85a01 : nt!KiExceptionDispatch+0xc2
fffff880`0a977c20 00000000`77a8592d : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiPageFault+0x23a
00000000`02ea0f00 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x77a8592d
STACK_COMMAND: kb
FOLLOWUP_NAME: MachineOwner
FAILURE_BUCKET_ID: X64_0xF4_C0000005_IMAGE_csrss.exe
BUCKET_ID: X64_0xF4_C0000005_IMAGE_csrss.exe
Followup: MachineOwner
2: kd> !analyze -v
*                        Bugcheck Analysis                                    *
CRITICAL_OBJECT_TERMINATION (f4)
A process or thread crucial to system operation has unexpectedly exited or been
terminated.
Several processes and threads are necessary for the operation of the
system; when they are terminated (for any reason), the system can no
longer function.
Arguments:
Arg1: 0000000000000003, Process
Arg2: fffffa8008159060, Terminating object
Arg3: fffffa8008159340, Process image file name
Arg4: fffff80002f935d0, Explanatory message (ascii)
Debugging Details:
PROCESS_OBJECT: fffffa8008159060
IMAGE_NAME: csrss.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 0
MODULE_NAME: csrss
FAULTING_MODULE: 0000000000000000
PROCESS_NAME: csrss.exe
EXCEPTION_RECORD: fffff8800a977b78 -- (.exr 0xfffff8800a977b78)
ExceptionAddress: 0000000077a8592d
   ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
   Parameter[0]: 0000000000000001
   Parameter[1]: 0000000002ea0ef8
Attempt to write to address 0000000002ea0ef8
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
CURRENT_IRQL: 0
ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
EXCEPTION_PARAMETER1: 0000000000000001
EXCEPTION_PARAMETER2: 0000000002ea0ef8
WRITE_ADDRESS: 0000000002ea0ef8
FOLLOWUP_IP:
+0
00000000`77a8592d ??              ???
FAULTING_IP:
+0
00000000`77a8592d ??              ???
FAILED_INSTRUCTION_ADDRESS:
+0
00000000`77a8592d ??              ???
BUGCHECK_STR: 0xF4_C0000005
STACK_TEXT:
fffff880`0a9770f8 fffff800`03014652 : 00000000`000000f4 00000000`00000003 fffffa80`08159060 fffffa80`08159340 : nt!KeBugCheckEx
fffff880`0a977100 fffff800`02fbd3e3 : ffffffff`ffffffff fffffa80`0ab4f060 fffffa80`08159060 fffffa80`08159060 : nt!PspCatchCriticalBreak+0x92
fffff880`0a977140 fffff800`02f4580c : ffffffff`ffffffff 00000000`00000001 fffffa80`08159060 fffff6fb`00000008 : nt! ?? ::NNGAKEGL::`string'+0x17946
fffff880`0a977190 fffff800`02c87993 : fffffa80`08159060 fffff800`c0000005 ffffcbdb`afa4f658 fffffa80`0ab4f060 : nt!NtTerminateProcess+0x20c
fffff880`0a977210 fffff800`02c83f30 : fffff800`02cc2dbc fffff880`0a977b78 fffff880`0a9778e0 fffff880`0a977c20 : nt!KiSystemServiceCopyEnd+0x13
fffff880`0a9773a8 fffff800`02cc2dbc : fffff880`0a977b78 fffff880`0a9778e0 fffff880`0a977c20 00000000`02ea2180 : nt!KiServiceLinkage
fffff880`0a9773b0 fffff800`02c87d82 : fffff880`0a977b78 00000000`000116e4 fffff880`0a977c20 00000000`02ea1c58 : nt!KiDispatchException+0x53b
fffff880`0a977a40 fffff800`02c868fa : 00000000`00000001 00000000`000116e4 fffffa80`079c2201 00000000`77a85a01 : nt!KiExceptionDispatch+0xc2
fffff880`0a977c20 00000000`77a8592d : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiPageFault+0x23a
00000000`02ea0f00 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x77a8592d
STACK_COMMAND: kb
FOLLOWUP_NAME: MachineOwner
FAILURE_BUCKET_ID: X64_0xF4_C0000005_IMAGE_csrss.exe
BUCKET_ID: X64_0xF4_C0000005_IMAGE_csrss.exe
Followup: MachineOwner

IPod: Screen Freeze, Loud Humming Sound

Similar Messages

Maybe you are looking for