IPod was working fine, then suddenly it began stopping mid song, when the screen goes dark, the music pauses. Why and how do I fix it. I already did a full restore.

I used to be able to leave the music playing and put the screen to sleep by tapping the power button. Now that same tap stops the music. If I dont push the button, the music plays for about a minute and then pauses. If I keep the screen active, the music contiues. I have tried a complete restore. Help anyone?

Is the headphones plug pushed in completely? 
Does the headphones you are using have remote control buttons on the cord?  If you try a different set (any type), does this problem still occur?

Similar Messages

  • Private Photos App - pictures not displaying This app was working fine, then suddenly it won`t display any of the photos.

    This app was working fine, then suddenly it won't display any of the photos. One day the photos were there, gone the next. It still shows how many photos are there but just shows a white screen. I can't export anything to the photo album. Adding photos to existing folders yields the same result, only white screen displayed. However, I can create new albums and add photos to those without issue. Does anybody know how to recover the "missing" photo"  I was going to try reinstalling the app but it's no longer available in the iTunes App Store. Thanks, Tracy

    1, you can't at the moment, though with iOS 5 in the Autumn, from http://www.apple.com/ios/ios5/features.html#photos :
    Even organize your photos in albums — right on your device
    2, by removing it from you synced from and re-syncing. Only photos taken with the iPad, copied to it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad (either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view)
    3, the location of the photos that you synced to the iPad should be listed on the iPad's Photos tab when connected to your computer's iTunes.
    4, you can copy the photos from your iPad to your computer : http://support.apple.com/kb/HT4083 . You should also be able to delete them from the iPad as part of the transfer process to your computer, and it's then your choice whether to add them to your sync photo list so as to copy them back to the iPad. Copying them to your computer would allow you to organise them into folders and therefore be able to sync them back into separate albums.
    5, I don't use Dropbox either. There are some third-party browser apps in the iTunes App Store that allow you to download pages so that you can view them when offline e.g. Atomic Web (the whole page is saved within Atomic Web, it doesn't place a photo into the Photos app)
    6, deleting content should help. If you remove an app from your iPad then you also remove the content that it's got on the iPad - so if you then decide to reinstall it back onto the iPad then you will need to manually add back any content that you want in it. None of the Apple built-in apps (including Photos) can be removed from the iPad

  • TS3700 music stops playing when the screen goes dark, but the earbud jack is flush with the iPod. The Jack is hard to push in now. what is the problem?

    Music stops playing when the screen goes dark; the earbud jack is flush with the iPod. The Jack is hard to push in. what is the problem? How do I Fix it?

    And you are positive the white part of the headset is flush with the body of the Nano?
    Have you tried another set of headphones to see if the problem persisted? If so, it's likely that the headphone jack needs replacing.
    B-rock

  • Is there a way to revive my ipod? it was working fine, then all of a sudden its completely dead.

    is there a way to revive my ipod? it was working fine, then all of a sudden its completely dead.

    Have you seen this article yet?
    iPod won't turn on
    B-rock

  • Hi i need some help im having problems the ipod can not be turned , in fact it was working fine but suddenly switched off and did not return to light n because it reconnected and if I had drums

    hi i need some help im having problems , the ipod can not be turned , in fact it was working fine but suddenly switched off and did not return to light n because it reconnected and if I had drums  . what can i do to turned on .
    its an ipod touch 64gb

    That symptom is covered here:
    iPod touch: Hardware troubleshooting

  • FaceTime was working fine then stopped. Wants me to sign in but fails to activate. I rebooted my IPad but that didn't help.

    FaceTime was working fine then stopped. Wants me to sign in but fails to activate. I rebooted my IPad but that didn't help.

    Hi jrthomus,
    Welcome to the Support Communities!  The article below will help you troubleshoot the issue you are having with Facetime on your iPad:
    iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    Your iPhone telephone number is linked to your Apple ID when you sign in to FaceTime or iMessage. This allows you to use your iPhone number with FaceTime and iMessage on other iOS devices.
    This feature isn't available on iPod touch (3rd generation) and iPad (1st generation).
    This feature is available with OS X Mountain Lion v10.8.2 or later.
    You can sign in to your Apple ID on an iPhone by tapping Settings > FaceTimeand Settings > Messages > Send & Receive.On iOS devices, find out which addresses are enabled with FaceTime and iMessage by tapping:
    Settings > Messages > Send & Receive > You can be reached by iMessage at:
    Settings > FaceTime > You can be reached by FaceTime at:
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    iPhone automatically registers your phone number for use with FaceTime and iMessage during activation.
    To use FaceTime with your Apple ID, navigate to Settings > FaceTime and tap "Use your Apple ID for FaceTime."
    To use iMessage with your Apple ID, navigate to Settings > Messages > Receive At and tap "Use your Apple ID for iMessage."
    When you enable FaceTime or iMessage with an iPad or iPod touch, you will need to enter a valid Apple ID and password. Other users will be able to contact you on FaceTime and iMessage using this email address.
    iOS: Troubleshooting FaceTime
    http://support.apple.com/kb/ts3367
    I hope this information helps ....
    - Judy

  • HT4623 I updated my ipad but had to skip the update to the icloud because it was not finished within 2 hours. The ipad worked fine then, but I turned it off.  When I tried to turn it on again, it kept asking for the password over and over.  What do I do n

    I updated my ipad but had to skip the update to the icloud because it was not finished within 2 hours. The ipad worked fine then, but I turned it off.  When I tried to turn it on again, it kept asking for the password over and over.  What do I do now?

    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • Itouch 5th gen was working fine then I shut it off and it wont turn on. tried itunes and when its siting here it heats up badly

    Itouch 5th gen was working fine then I shut it off and it wont turn on. tried itunes and when its siting here it heats up badly

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       
    The hotness indicates a possible hardware problem. If the iPod is defective and not abused Apple will exchange it at no cost

  • My iPod was working fine until I finally

    My iPod was working fine until I finally decided to update the software. After i did this, it told me to update my firmware by plugging it in. I did, and then when I unplugged it later on, every song on my iPod was gone. A few days later, I plugged the iPod into my computer and all the songs magically came back on it, even the ones that were not backed up on the computer I plugged it into. It worked fine for a couple of days, but this morning when I tried to play a song, it kept lagging and would struggle, making some clicking sounds (not continuous ones like when a harddrive crashes, just occasional ones like it was having trouble reading), so I reset it. When I started up again, I got the sad iPod icon. I have since tried everything in every relevant support article I could find. I tried the 5 R's, and I also put it into disk mode (which it finally did, after much lagging), but still my computer would not recognize it, even after reinstalling iTunes.
    Basically, what it comes down to, is I cannot restore it, because I cannot get my computer to recognize it. It has always worked fine on this computer -- in fact, I never had a single problem with my iPod until I tried to update the software. I guess I learned, 'if it ain't broke, don't fix it' - but how can I ever get my iPod to work again? Please help me!

    Hi jaded99, Welcome to discussions, I trust you found the correct iPod forum if not here is a link. Bob :~))
    http://discussions.apple.com/category.jspa?categoryID=146

  • My iphone 4s was working fine then it just turned off and wont turn back on but my home button dosent work what do i do?

    my iphone 4s was working fine then it just turned off and wont turn back on but my home button dosent work what do i do?

    Apart from the battery being dead (make sure by plugging into a power source for 15 minutes), hold the sleep/wake button and home button together for 10 - 20 seconds or until the apple logo appears.
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support

  • HT201263 my phone just shut off and will not come back on no matter what I do. It was working fine then just went compeltely dark and is unresponsive. Help!!

    My phone was working fine, then just went completely blank, and now is totally unresponsive

    Plug it in to mains power for at least 15 minutes.  If it doesn't automatically come on, try a Reset... press the home and sleep/lock buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.

  • My ipod was working fine, I downloaded some new songs and the sync would not come up. Eventually it did but all the songs did not download. I was trying to do the song that were on my computer but not the ipod. no I have no content in my ipod.

    My ipod was working fine, I downloaded a couple of songs and my sync would not work properly, the  computer said it was in sync but some of the songs didn't download. I trying just picking the ones that did not load and now I have no content in my ipod. I restores it to manufacrtureres settings and backed up from file but my ipod says no content? Any ideas please........

    Hi jaded99, Welcome to discussions, I trust you found the correct iPod forum if not here is a link. Bob :~))
    http://discussions.apple.com/category.jspa?categoryID=146

  • I am no longer able to get video playback on my pad.  Was working fine, then nothing. What do I do?

    I am no longer able to get video play on my pad.  It was working fine, then when I went to use it again later, nothing.  Any suggestions as to what to do?

    Quit the Videos app completely and reboot the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    If that doesn't work - try this. Swipe to the right from your first home screen to get to the iPad Spotlight search. Type in the name of any of your movies in the field at the top. When the movie appears in the search - tap on it and it should start to play. Let it play for a minute or so - hit done - go back to videos app and see if all is OK.

  • TS3274 The Ipad was working fine, then just went blank. It will not turn on again. It was fully charged.

    The Ipad Air was working fine - then it went blank. It will not turn on again. It was fully charged It is less than 2 months old.

    A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 15-20 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
    No content is affected by this procedure.

  • TS3274 I pad was working fine then started to to get a message I pad not connected to internet. Other devices are working in our home. wireless is working. Help

    I pad was working fine then when tring to access safari or facebook recieved a message Safari cannot open page because your I pad is not connected to the internet. How do I correct?

    1. Turn router off for 30 seconds and on again
    2. Settings>General>Reset>Reset Network Settings

Maybe you are looking for

  • How can i change the color of the text on a button in Roll Over or Click state (Cs5.5)

    Hello, Here is the problematic: 1° How can i change the color of the text on a button in Roll Over or Click state (Cs5.5) - I've many button in a doc im creating - the color of the buttons is white with black stoke & black text - in roll over state i

  • IPod Shuffle 4th Generation not charging

    I have a iPod Shuffle 4th Generation and it is not charging. I have it plugged into my macbook and it showing up in itunes and has a blinking orange light. When I remove the shuffle and turn it on there is no light. I have tried restoring the shuffle

  • Acrobat PDFmaker is ignoring hard page breaks in Word docx

    I'm working with a client's Word docx file which is formatted almost entirely with tables and uses hard page breaks throughout. When the document is exported to a PDF using Acrobat PDFMaker, some of the hard page breaks are rendered but some of them

  • Contract ID and Purchase Document No in MM

    Guys, Please help me to understand if contract ID  and Purchase Document No in MM will be the same thing or not.. In a report i need to get Purchase Document No but in the datasource i have only contract id.. To my knowledge contract is a document ty

  • Why asynchronous RFC is stated as asnynchronous processing type ?

    in help document it stated that ,in r/3 system asynchronous RFC has different meaning... what is that meaning? why it stated as asynchronous processing type?