My iPod was working fine until I finally
My iPod was working fine until I finally decided to update the software. After i did this, it told me to update my firmware by plugging it in. I did, and then when I unplugged it later on, every song on my iPod was gone. A few days later, I plugged the iPod into my computer and all the songs magically came back on it, even the ones that were not backed up on the computer I plugged it into. It worked fine for a couple of days, but this morning when I tried to play a song, it kept lagging and would struggle, making some clicking sounds (not continuous ones like when a harddrive crashes, just occasional ones like it was having trouble reading), so I reset it. When I started up again, I got the sad iPod icon. I have since tried everything in every relevant support article I could find. I tried the 5 R's, and I also put it into disk mode (which it finally did, after much lagging), but still my computer would not recognize it, even after reinstalling iTunes.
Basically, what it comes down to, is I cannot restore it, because I cannot get my computer to recognize it. It has always worked fine on this computer -- in fact, I never had a single problem with my iPod until I tried to update the software. I guess I learned, 'if it ain't broke, don't fix it' - but how can I ever get my iPod to work again? Please help me!
Hi jaded99, Welcome to discussions, I trust you found the correct iPod forum if not here is a link. Bob :~))
http://discussions.apple.com/category.jspa?categoryID=146
Similar Messages
-
My iPOd was working fine until last night. Today, it has not updating email
My iPOd touch was working fine last night. Today it has not updated email. When I try to send an email it telsl me that the username or password is incorrect. I have veryfied both hundreds of times and they are correct. It actually allows me to send emails but it has not updated the mailboxes.
Hi jaded99, Welcome to discussions, I trust you found the correct iPod forum if not here is a link. Bob :~))
http://discussions.apple.com/category.jspa?categoryID=146 -
I did an update on my ipod touch, now it says it is in restore mode. i don't want to lose my info, but my ipod won't do anything now. thanks itunes; it was working fine until i did the update you said i needed. what do i do now??????
No one here said anything about an update or your device needing it.
FYI, you are not addressing Apple here, we are all users like yourself.
If the device is in recovery mode, the only option is to restore it. All data on the device is gone. This should not be an issue if the device has been used as designed and regularly synced/backed up. -
my ipod 4g was working fine until i locked the screen but when i tried to turn it back on the screen stays black and its been 3 days. Does anyone know how i could fix this?
- Charge the iPod for half an hour. Then reset the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- if still not working, connect to your computer. If iTunes sees the iPod, restore the iPod.
- If still problem, place the iPod in recovery mode and then try to restore the iPod. For recovery mod see:
iPhone and iPod touch: Unable to update or restore -
My ipod nano was working fine until i uploaded some new tunes today. It sync properly and once disconnected it just switched off and would not even turn on. I have put it on charge for a few hours but nothing happens, infact the charger is getting hot. Pleaseeeeeeeeeeee help I need my ipod.
The backlight burned out from getting it wet. You will have to replace the screen at a 3rd party shop, buy a screen and replace it yourself, or make a Genius Bar appointment at your nearest Apple Store and do an out-of-warranty replacement for $199 USD.
-
my apple tv was working fine untill the AirPlay option disappeared. I haven alterd the settings and have tryed rebooting both iPhone and ipad. I even rebooted the ATV and that disn't work. i am connected to the same network on both devices to. My iPad is up to date but my phone isn't but as I said mirroring and AirPlay worked fine on both devices befor...
Hi F1N5G10,
Thanks for contributing to the Apple Support Communities.
It sounds like you don't have the AirPlay option on your iOS devices. Restarting your Apple TV and iOS devices was a good first step, and you can find some additional tips to guide your troubleshooting at this link:
Resolve issues with AirPlay and AirPlay Mirroring from iPhone, iPad, and iPod touch - Apple Support
Sincerely,
Jeremy -
So I just bought an iPhone 5s and Touch ID was working fine until the software update is that a bug ? Because I don't think my home button broke
Have not heard of that but here is what I would do - test after each step to see if the problem is solved
1. Restart or reset your iPhone, iPad, or iPod touch - Apple Support
2. If that does not work - back up to iTunes and restore to factory settings
3. Check to see if the problem is resolved before restoring from backup -
My iPad was working fine until Tues. Night. I went to go on facebook and it shows a white page like it is coming on the it goes back to the home page. I have turned it off, deleted Facebook and put it back on but it still does the same thing. What can I do?
Morning DeeHutton,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Best of luck,
Mario -
I am getting a "connection timeout" message when trying to access my Airport Extreme with various laptops, Play Station 3 and Wii. My Airport Extreme is about a month old; it was working fine until about a week ago. Suddenly, the "timeout" is not allowing me to connect to my wireless network.
It could be that there's a new source of interference.
Use the advice in the second message of this thread to investigate the signal and noise levels that each client sees:
http://discussions.apple.com/thread.jspa?threadID=2347845&start=1
By the way, you've been misled by the poor field labeling into trying to type your entire message into the subject field, instead of putting a one-line topic description there. -
My ipod was working fine, I downloaded a couple of songs and my sync would not work properly, the computer said it was in sync but some of the songs didn't download. I trying just picking the ones that did not load and now I have no content in my ipod. I restores it to manufacrtureres settings and backed up from file but my ipod says no content? Any ideas please........
Hi jaded99, Welcome to discussions, I trust you found the correct iPod forum if not here is a link. Bob :~))
http://discussions.apple.com/category.jspa?categoryID=146 -
my itunes was working fine until i tried downloading the most current version of itunes, now when i try to get on my itunes library, it wont boot up and has error codes, error 7, and( windows error 126). it also says that MSVCR80.dll is missing from my computer,please re install itunes. but when I try to re install it it will not install on my computer.
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
PDF files not being displayed correctly, instead I get a blank screen with some sort of small pinned icon in the centre. It was working fine until today HELP!
What is your operating system? Reader version? Are these local or online PDFs? If online, in what browser?
Can you post a screenshot: https://forums.adobe.com/thread/1070933 -
gmail on iphone was working fine until yesterday when it prompted me with the message "cannot get mail user name or password for gmail is incorrect", i have tried deleting the account and re-created a new account, same problem, can anyone help?
paulcb, you're a genius, it worked, thank you so much, you don't know how much stress you have taken off my shoulders, I am constantly on my email in my iphone everyday. Thanks a million, take care. Robert.
-
I am trying to fix a friend’s eMac. It was working fine until the name of the administrator was changed incorrectly in Systems Accounts. Upon restart the computer failed to mount. I tried to reinstall Tiger and could not. The destination to do this install could not be found. While in Disk Utilities I tried to repair and then zero out erase the hard drive, this also could not be successfully done. The hard drive was working perfectly before the name change. I may try to load Tiger from the eMac onto an external drive and then hope to erase the eMac internal drive.
Thank you for your thoughts on this as it would be a shame to retire this trusted computer.
Nick M.Hello,
Thank you very much for your attention to this. Yesterday I was able to get the eMac to install Leopard onto an external drive. I had hoped that once done I would be able to initialize or erase the content of the internal drive in Disk Utility, but was not able to do so, I only received error messages telling me my request failed. This was also true when I tried to create partitions on it. So in effect, the computer runs, but only from the external drive. I could not even find the internal drive while running from the external drive. Where is it? And the internal drive only occasionally shows up in Disk Utility.
As for holding Option and Alt, the internal drive did not show up.
And Leopard was running on the eMac when I lost contact with it. Again, all failed when a name of the administrator was changed, but was not properly done. Or something like this.
Is there anyway I can use Terminal to help reach the internal drive?
I realize I am asking a lot of questions.
And I thank you for your time,
Nick M. -
Hi, I have a freecom 1TB hard drive which was working fine until it froze. I pulled it out (mistake I now know) and now it doesn't mount. It shows up in Disk Utility but won't manually mount. When I try to repair it gives message 'failed on exit'. Some people have said to try Disk Warrior, but at $100 it's quite expensive maybe fix. help!
You likely need to reformat the drive which will destroy all data and you need a backup to restore it. If no backup is present then a data retrieval service can be more expensive than DiskWarrior. There is software that can rescue the data but I can not vouch for it's effectiveness as I have always maintained backups. .
http://www.prosofteng.com/
http://www.wondershare.net/ad/data-recovery-mac.html?gclid=CLTp3Mj07rkCFevm7AodL lUAHw
http://diskdoctors.com/software/mac-data-recovery/utility.asp?gclid=CMyf_MH17rkC Fcvm7AodSE0A8A
http://www.cleverfiles.com/
Maybe you are looking for
-
Oracle 9i lite application development using java
hi all, I want to develop a applcation which interacts with the 9i lite database in java.Is there any emulator which will help me in developing this on a windows 2000 machine or winnt machine? i tried developing it in eVB but the emulator which come
-
How do I get rid of passcode to unlock screen. I do not want it
I just downloaded ios7 and typed in a passcode, thinking it was just to use so others could not take my phone and delete stuff to use it for themselves. I did not know I had to use this passcode every time I wanted to get into my phone or my iPad. So
-
Ive accidentally closed all of my toolbars how do I get them back
PLEASE HELP! I've closed ALL of my toolbars (by right-clicking and closing each one), now I have NO menu or toolbar and I have no way to navigate! I have right clicked in the area where a toolbar would be to try to re-open them and I don't get that o
-
Need to update to iOS5 or iOS6 put upon doing so, it stated it will erase all my Apps and Content. I have a years worth of notes in Note Taker HD.......do not want to lose.....any options?
-
BAPI ABUMN (bapi_***_acc_transfer_post,)
Dear friends, We are trying to post an intracompany asset transfer using the bapi bapi_***_acc_transfer_post, nevertheless when we execute it the system comes up with the following error: -Transaction type xxx cannot be used for activity retirement f