FaceTime was working fine then stopped. Wants me to sign in but fails to activate. I rebooted my IPad but that didn't help.
FaceTime was working fine then stopped. Wants me to sign in but fails to activate. I rebooted my IPad but that didn't help.
Hi jrthomus,
Welcome to the Support Communities! The article below will help you troubleshoot the issue you are having with Facetime on your iPad:
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Your iPhone telephone number is linked to your Apple ID when you sign in to FaceTime or iMessage. This allows you to use your iPhone number with FaceTime and iMessage on other iOS devices.
This feature isn't available on iPod touch (3rd generation) and iPad (1st generation).
This feature is available with OS X Mountain Lion v10.8.2 or later.
You can sign in to your Apple ID on an iPhone by tapping Settings > FaceTimeand Settings > Messages > Send & Receive.On iOS devices, find out which addresses are enabled with FaceTime and iMessage by tapping:
Settings > Messages > Send & Receive > You can be reached by iMessage at:
Settings > FaceTime > You can be reached by FaceTime at:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iPhone automatically registers your phone number for use with FaceTime and iMessage during activation.
To use FaceTime with your Apple ID, navigate to Settings > FaceTime and tap "Use your Apple ID for FaceTime."
To use iMessage with your Apple ID, navigate to Settings > Messages > Receive At and tap "Use your Apple ID for iMessage."
When you enable FaceTime or iMessage with an iPad or iPod touch, you will need to enter a valid Apple ID and password. Other users will be able to contact you on FaceTime and iMessage using this email address.
iOS: Troubleshooting FaceTime
http://support.apple.com/kb/ts3367
I hope this information helps ....
- Judy
Similar Messages
-
My iphone photos have stopped showing up in my photo stream folder on my pc. They do show up on my iPad. I tried signing out and back into to iCloud on my pc, but no help. Any ideas?
The iCloud backup only backs up your camera roll photos, not photo stream photos. Also, photos only remain in photo stream for 30 days. After that they are removed from your photo stream, but will remain on your devices that already have them. If all your photo stream photos are older than 30 days, that would explain why they don't stream to your iPhone 5 even though they are on your iPad.
To get them on your phone, you can use an app like PhotoSync, which will wirelessly transfer photos from any album (including photo stream) between your devices. Alternatively, you can save the photo stream photos to the camera roll on your iPad (by opening the My Photo Stream album, tap Edit, tap all the photos to select them, tap Share, tap Save to Camera Roll), then import them to your computer (see http://support.apple.com/kb/HT4083), put them in a folder, then select the folder on the Photos tab of your iTunes sync settings and sync them to your phone. -
Hi,
I just got familiar with my address book on my YouTube channel. I was adding contacts and everything was working fine then out of nowhere I got a Stop Script pop up notice. I am using Firefox. Now when I go to my address book on YouTube it freezes and I often have to use CTL + ALT + DLT to stop it and start over.
Is this a Firefox or YouTube problem? I tried looking at this page on IE and the same thing happens.You are telling us by yourself that is a Youtube problem, because it happens also on IE.
Anyway that may be an issue with your e-mail account. Maybe you have too many e-mails and YouTube gets so busy trying to add all of them. If you hadn't added them already, you could export that directions to CSV and divide the CSV in parts so YouTube wouldn't have so much work. How many directions you wanted to add? -
This app was working fine, then suddenly it won't display any of the photos. One day the photos were there, gone the next. It still shows how many photos are there but just shows a white screen. I can't export anything to the photo album. Adding photos to existing folders yields the same result, only white screen displayed. However, I can create new albums and add photos to those without issue. Does anybody know how to recover the "missing" photo" I was going to try reinstalling the app but it's no longer available in the iTunes App Store. Thanks, Tracy
1, you can't at the moment, though with iOS 5 in the Autumn, from http://www.apple.com/ios/ios5/features.html#photos :
Even organize your photos in albums — right on your device
2, by removing it from you synced from and re-syncing. Only photos taken with the iPad, copied to it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad (either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view)
3, the location of the photos that you synced to the iPad should be listed on the iPad's Photos tab when connected to your computer's iTunes.
4, you can copy the photos from your iPad to your computer : http://support.apple.com/kb/HT4083 . You should also be able to delete them from the iPad as part of the transfer process to your computer, and it's then your choice whether to add them to your sync photo list so as to copy them back to the iPad. Copying them to your computer would allow you to organise them into folders and therefore be able to sync them back into separate albums.
5, I don't use Dropbox either. There are some third-party browser apps in the iTunes App Store that allow you to download pages so that you can view them when offline e.g. Atomic Web (the whole page is saved within Atomic Web, it doesn't place a photo into the Photos app)
6, deleting content should help. If you remove an app from your iPad then you also remove the content that it's got on the iPad - so if you then decide to reinstall it back onto the iPad then you will need to manually add back any content that you want in it. None of the Apple built-in apps (including Photos) can be removed from the iPad -
I am no longer able to get video playback on my pad. Was working fine, then nothing. What do I do?
I am no longer able to get video play on my pad. It was working fine, then when I went to use it again later, nothing. Any suggestions as to what to do?
Quit the Videos app completely and reboot the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If that doesn't work - try this. Swipe to the right from your first home screen to get to the iPad Spotlight search. Type in the name of any of your movies in the field at the top. When the movie appears in the search - tap on it and it should start to play. Let it play for a minute or so - hit done - go back to videos app and see if all is OK. -
My phone was working fine, then just went completely blank, and now is totally unresponsive
Plug it in to mains power for at least 15 minutes. If it doesn't automatically come on, try a Reset... press the home and sleep/lock buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
-
Is there a way to revive my ipod? it was working fine, then all of a sudden its completely dead.
is there a way to revive my ipod? it was working fine, then all of a sudden its completely dead.
Have you seen this article yet?
iPod won't turn on
B-rock -
Apple tv keeps cutting out- worked fine then stopped working? what's up with it?
Apple tv keeps cutting out- works fine then stops working? Just Cut's Out. What's up with it?
Just started. Worked fine since I purchased it. It restarts after a 2 minute pause.
Do Not know how to add to Question - Sorry. -
The Ipad Air was working fine - then it went blank. It will not turn on again. It was fully charged It is less than 2 months old.
A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 15-20 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
No content is affected by this procedure. -
Itouch 5th gen was working fine then I shut it off and it wont turn on. tried itunes and when its siting here it heats up badly
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
The hotness indicates a possible hardware problem. If the iPod is defective and not abused Apple will exchange it at no cost -
I pad was working fine then when tring to access safari or facebook recieved a message Safari cannot open page because your I pad is not connected to the internet. How do I correct?
1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings -
I have a factory unlock iphone 5 with the lasted version. Since yesterday my sim card stopped working and now says `No Sim`, was working fine and stopped working now, other sim works but just not mine. ¿What can be happening?
I thought that, but I put the sim card in another device that is not Apple and works. Definitely the sim card work, but no longer in my iPhone 5 or maybe in any other Apple device, i dont know why!! But i gonna get a replacement to see what happen
-
my iphone 4s was working fine then it just turned off and wont turn back on but my home button dosent work what do i do?
Apart from the battery being dead (make sure by plugging into a power source for 15 minutes), hold the sleep/wake button and home button together for 10 - 20 seconds or until the apple logo appears.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support -
How do I to get Siri to spell Shawn correctly? None of the "tips" I've seen so far work. I tried changing the phonetic first name but that didn't work. I tried adding another dictionary but that didn't work either. I spell his name but Siri sows it as SH A WN (or something like that). Thanks
Hi Susie, I use Norton 360 and have the latest Firefox 8 installed is working fine for me. Firefox 8 support for [http://community.norton.com/t5/Norton-360/Firefox-8-Support-for-Norton-Toolbar/td-p/581640 Norton Toolbar] was released on Nov 8th. Install the appropriate add-ons based on the version of Norton 360 you're using (see official Norton link above). Hope this helps.
-
IPod touch was working fine, then next time will not power on. Just over a year old
iPod touch was working fine, next time no power uo
You should try doing a restore. A restore on your ipod touch will delete all it's storage and set it back to it's factory conditions but it should fix your problem. Before the restore, I suggest making a backup file for your ipod touch on itunes.
To restore your ipod touch:
1.Connect your ipod touch to your computer and open itunes if not already open.
2.Select your ipod touch name in the devices section of the source pane.
3.Click the restore option under the version section in the summary tab. An alert will pop up asking you if you really want to do this. To affirm, click restore.
4.The restore process has now started.
With your ipod touch restored, you can resync it working fine.
Maybe you are looking for
-
Setup Problem with 8500a, computer does not sees printer, but printer sees router
When updated my wireless router (AC 1200) my 8500a had to go to the "guest network". The printer sees the router and prints the test pages fine, the computer does not see the printer and I can not print. During the setup, when I enter the IP addre
-
Odi 11g - IKM SQL to Hyperion Essbase (DATA) log file always empty
In odi 11g when using *"IKM SQL to Hyperion Essbase (DATA)"* setting the the "LOG_ENABLED" = true, only an empty file are generated. Just "LOG_ERRORS" file (if errors occurs) are created. Is this just an my issue? Can someone help me? p.s.: the same
-
I
-
Need a way to make background sound continuous when combining clips?
I suspect the answer to this is that it can't be done in iMovie 8 and I need to use iMovie HD, but let me ask anyway. Perhaps one of you can tell me a clever way to do this. I am creating a home movie of a wedding, in which there is background music
-
QUERYING TWO TABLE BUT not rquired 99% of the time
I have two tables EMPLOYEE AND DEPARTMENT. Most of the time I require to query only employee table (99% of the time),but there are times when I have to query department table to get details about department select e.emp_id,e.emp_age,e.department_desc