IPVC GW2P: Caller get "vxtarget" information in replacement of the ISDN num

Hi People,
On the Gw version 5.5.0.0.5, when a endpoint or a Cisco MCU MC06 call an ISDN number, the endpoint or the MCU get on the display (in replacement of the isdn number) the information " vxTarget". How can we configure it to keep the isdn number on the display ?
Hardware : Cisco IPVC Gateway GW2P version 5.5.0.0.5
Thanks,
Kurt

That did it!, Thanks.
FYI I had to use the command \....
sip-ua
remote-party-id
timers buffer-invite 5000

Similar Messages

  • Getting my Droid X2 replaced for the third time...

    Don't really have any questions that need answering, just feel like getting peoples' input on my issue.
    I am primarily a business user. While I won't deny that I use my phone for Facebook and Instagram when I'm sitting bored in a meeting, more than 80% of the time I spend on my phone is work-related. With that in mind, the most important features for me in a device are (in no particular order):
    Battery life
    Performance (speed, responsiveness, etc.)
    Reliability (low frequency in terms of crashing, force closes, hangs, forced reboots, etc.)
    Compatibility with corporate email and calendar
    To date, the Droid X2 has met (and when it comes to battery life, exceeded) all of my expectations in those areas except one: reliability.  My phone encountered issues this week that interfered with my ability to conduct business, and I was forced to contact Verizon Support.  The rep, Brandon, was extremely helpful and I get the feeling that he did all that was in his power to help me out. He suggested that he might be able to get me a different device in the same tier, since I have had the X2 replaced so many times. Unfortunately Brandon's supervisor did not approve the order, and I didn't have time to attempt to speak with his superior.
    I understand that giving a different device as a replacement is not covered by warranty or company policy (or if it is, someone please let me know ), but it should be obvious that the Droid X2 is an unreliable device. I am not a vanilla user - I have been involved in Android development since the HTC Dream (G1) - but I have left my Droid X2 bone stock since it worked well enough. I know all of the troubleshooting options available and try them all each time before calling support. It is my honest and sincere opinion that each and every Droid X2 that I've had has been faulty.
    With that in mind, do you think Verizon ought to switch me out for a different model?  I honestly don't care about having the hottest new smartphone, I just want something that meets my needs and isn't a downgrade. Not trying to start a firestorm here, nor am I trying to rant and rave towards VZW - just interested in discussing the topic.

    Good day Jon;
    I've had my Droid X2 since June of 2010. I am currently on #3 due to lockups, freezing, overheats and virtually all the issues you can find in this forum. I at first assumed it was something I was doing or loading. Having been in talks with Verizon, Google and Motorola. Each handset had been reset to factory numerous times. Would work for a week or so then start the same issues.
    I must say that Verizon and Google have been the best in working with this, Motorola has been absolutely useless in resolving known issues with their product. All my handsets were factory and the only apps from Verizon or Google. And the Droid X2 has had issues.
    I have learned to trust Verizon and Google on this, but will never own another Motorola product. My last response from this company was to send in the only phone I own for their evaluation, and maybe in 10 days they would decide if there was a warranty issue. This even after Verizon replaced it previously.
    I like the Android platform and looking forward to upgrading shortly to the Samsung line. I have other products of theirs and had very good luck. When issues have arisen they have been helpful and positive.
    Thank you for the opportunity to let you and others know that many of us are here and to understand others have had the same issues.

  • Does the sound of your caller get reduced when you speak at the same time?

    Hi everyone,
    I'm noticing some strange behaviour of my iPhone 3G's audio on the O2 network here in the UK. Both O2 & the iPhone are new to me so I don't know which is the cause, but was wondering if anyone else has experienced this 'problem'? What happens is this:
    When I'm on a call with my ear to the iPhone's earpiece (or using headphones) & I speak whilst the caller is speaking (or let's say I'm chatting to my wife in the same room as me whilst I'm listening to 'hold music'), I've noticed that *the volume & call-quality of the incoming line is often reduced*.
    Initally this might not seem a problem, BUT, there have definitely been a view times when I've been in a noisy environment (such as street traffic, or my kids shouting & playing in the background) where I've missed things that the caller told me. In both these situations, I've noticed that the caller's voice has got quieter, sounded 'grainy' or even sometimes gone totally quiet until the sound from me (or my environment) has stopped. The 'problem' seems to right itself a minute or so of the call, but that's little consolation to the first 60 seconds of the call!
    It's most noticeable on headphones by the way; As a test, I plugged in regular headphones to my iPhone (i.e. not the iPhone IEMs with the mic), called a landline phone-line with a pre-recorded message, then spoke into the iPhone's built-in microphone. Every time I did this, the incoming audio signal was 'turned down' &/or sounded gritty, then returns to normal when I (or my background noise) went quiet.
    I don't think this is a fault with my phone. but more either an iPhone 3G hardware 'characteristic', v2 software bug, or network issue. (O2 said they've never heard of this before of course...)
    If anyone else has the time to try this out please, I'd appreciate it
    Thanks,
    Jason

    Hi Quickdraw,
    Thanks for your reply.
    I don't know this for sure, but I think it has EVERYTHING to do with bandwidth.
    Yes, that makes a lot of sense... I was making calls on 2G/Edge at the time of my 'tests' rather than 3G, partly due to battery-saving but also that 2G still has much better coverage over here (just as you guys in the States seem to be experiencing).
    I've done some more tryouts today, & noticed that if the 2G signal is really strong, OR if I switch to 3G & have a reasonable-to-good reception, the 'incoming-signal-dropping-out-when-I-talk' doesn't happen much at all...
    So, the bandwidth thing does make sense, but it's interesting/annoying that it manifests itself as "one good-quality voice OR the other", rather than "full-duplex-but-not-so-great-for-both-voices" sound...
    If anyone in the UK can feed back their experience with O2, I'd appreciate it please. (I never had this issue in the 10 years I was with Orange..)
    Cheers,
    Jason

  • Can I get my Curve 8330 replaced under the limited warranty?

    We bought my Curve in March so we should still be under the one year manufactures warranty. Here's what's wrong with my phone: the sound effects are completely broken. instead of making it's pretty sounds when I get any alerts or calls, it makes a screeching sound! This started out of nowhere a few days ago. I went to a Sprint store and they immidiately shut me out saying that we have to go through Blackberry directly. I searched the site and couldn't find the information I need to get it fixed/replaced. I have no idea where to go about this. Can someone help point me in the direction I should go?
    Solved!
    Go to Solution.

    Welcome to the forums
    Normally you are covered for 12 months when you get the phone. Your service provider should be able to replace the phone as long as it hasn't been water-damaged. If they refuse to do so, ask to talk to a manager...that usually gets things working faster
    Let us know how it goes.
    Kijana
    Please remember to:
    1. Mark Accept as Solution on the appropriate post once your issue has been resolved
    2. Give Kudos to helpful posts (click the star next to the post)
    Thanks

  • I recently had to get my iPhone 4s replaced.  The old phone was backed up to ICloud.  I get a message when I plug this one in that it is not backed up and there isn't enough storage left to back it up. How to I remove from the other phone so I can back th

    I am trying to back up my new Iphone on to ICloud.  It shows I dont have enough storage because it still has stuff from the old IPhone.  How can I back up this phone and erase from the other.  Apple kept the other phone when they replaced it.  If I hit the delete storage for the other phone (which shows up on the Icloud Icon on this phone) will I lose everything on this phone?  That's what I want to avoid....

    If it's corrupt, generally it would be lost.
    However, there is third-party software out there that can retrieve some of the data, those of which however I could not recommend as I have never done so myself.
    Also, if the old 4S was running a more recent software version than the current 4S, that may cause the issue however usually iTunes tells you exactly that.
    Good luck in retrieving that information.

  • If I get my Ipod touch replaced with the warranty because of a faulty battery

    1. Will it be new? I got it like a month ago.
    2. Will the new one have a 1 year warranty or no?

    Apple - Support - iPod - Service FAQ

  • Get accounting information

    I have a function as follows to extract the relationship of DN, Invoice and SO, but i want to get accounting information, so i loop the BSEG table, then pass the DN, SO and SO Item to function. The question is when same delivery refer to same so and so item, that will duplication the record, becuase i only pass delivery no, so and so item to function, i think i should pass delivery item to the function. but the BSEG without store those information. How can i do that. Thanks
    FORM   .... USING P_VBELN TYPE LIPS-VBELN
                                P_VBEL2 TYPE BSEG-VBEL2
                                P_POSN2 TYPE BSEG-POSN2.
    SELECT ...
    INTO TABLE ITAB
                          FROM
                          LIPS AS T1
                          INNER JOIN VBRP AS T2 ON T1VBELN = T2VGBEL AND
                                                   T1POSNR = T2VGPOS
                          INNER JOIN VBAP AS T3 ON T1VGBEL = T3VBELN AND
                                                   T1VGPOS = T3POSNR
                          INNER JOIN VBRK AS T4 ON T2VBELN = T4VBELN
                          INNER JOIN VBAK AS T5 ON T3VBELN = T5VBELN
                          WHERE
                          T1~VBELN = P_VBELN AND
                          T3~VBELN = P_VBEL2 AND
                          T3~POSNR = P_POSN2
    END FORM.

    Hi,
    If at all you need the Accounting Doc information w.r.to Sales doc's i.e SO, DN and Invoice, I suggest not to use the BSEG table at all.
    You can get all the related Accounting Info from BSID and BSAD table.
    Pass the KUNNR Customer and the Related Billing Doc(invoice No) VBELn field for these tables you will get the belnr (acc Doc). With this belnr if you need further info get them from BKPF and BSEG.
    I hope you know the linkage between Bill Doc(invoice) Del Note DN and SO.
    VBRP -VGBELl is the Del doc No VGPOS is the del item and AUBEL is the SO no and AUPOS is the SO item.
    Or youc an use the VBFA table for the doc flow between the DN, SO and Invoice.
    Regards,
    Anji

  • Can CM12 hardware inventory get more information by calling a WMI Method

    Hello Everyone,
    i have a question for CM12 hardware inventory. here is my question
    i'm now have a powershell script which can lists all the shared folder permissions or NTFS permissions. This powershell get such information by calling a WMI Method in Win32_LogicalShareSecuritySetting.
    here is the powershell link http://gallery.technet.microsoft.com/scriptcenter/Lists-all-the-shared-5ebb395a
    i'm now trying to implement this in SCCM 2012 R2. In SCCM client settings you can add a BASIC WMI classes very simply. But i didn't find a way to calling WMI classes Method by SCCM hardware inventory which can help me get more information just like
    the powershell i posted.
    i'm really not familiar with WMI and not under what is WMI method very clearly.. just hope someone can give me a quick answer of my question
    Any help will be greatly appreciated
    Thanks
    MJQIAN

    What is your exact requirement?
    Creating a WMI provider is Hard. Really hard, but one created you will get real-time results.
    However creating a static WMI class is easy. But the results need to be refreshed every so often to ensure that the data is relevant.  I did a quick bing search and here is a PowerShell script to do it.
    http://social.technet.microsoft.com/Forums/scriptcenter/en-US/183b8b56-131c-4de7-80bc-08650daf7333/wmi-custom-class-with-powershell?forum=ITCG
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • HT1766 I tried to add music from my sons ITunes, instead it deleted all my information and replaced it with all my sons info can I get my information back on my phone? HELP

    I tried to add music from my sons ITunes, instead it deleted all my information and replaced it with all my sons info can I get my information back on my phone? HELP

    Each Apple ID has it's own library in iTunes.  If you tried to sync his music to your device, then it will not only wipe your information on your phone, but can affect your sons.  Make sure you are logged into iTunes with your Apple ID and restore your device from a previous backup.

  • How to get parameter information on DLL function call (CVI) in TestStand?

    Hi,
     I wrote a simple Instrument Driver in CVI, and it has 3 parameters Voltage, Current, Channel.
    I made a DLL in order to call this function in TestStand as an action.
    That works fine, the only problem I have is that it shows my function as DC_Conf (arg1, arg2, arg 3) and I only get the type information like double double int.
    I do not get the parameter names Voltage, Current, Channel...
    How can I get this information to be displayed in TestStand so I know which parameter arg 1-3 is Voltage,Current,Channel in case I forgot?
    or 
    Is there a way to display the help text of the driver in TestStand?
    I tried clicking on the (?) button next to the function call but it did not do anything...
    My TestStand is version 4.1
    Thanks...Ness

    Ness,
    When TestStand populates the parameter information, it does so by looking at the dll's type library.  CVI automatically creates a type library for a dll based on the function's signature, which can include the parameter names.  However, if the function prototype does not contain variable names, then CVI cannot include names in the type library.
    You can define your own type library to directly control the information available to TestStand from your dll.  If you want to define your own type library, you can do so using a .fp file.  This will allow you to use complex data types (such as structs), and to rename your parameters.
    Here's a KnowlegeBase describing the process: Embedding Type Libraries in a LabWindows/CVI DLL for use in TestStand
    Either solution proposed here will work, and they each have tradeoffs:
    You can definte the variable names in the function prototype.  This keeps the functions self-documenting, and is the easiest solution.
    You can create a .fp file and define your own type library.  This allows you the most control over exactly what you will see in TestStand, but requires you to create a new file, and to keep that new file up to date if you make any changes to your source code.
    Message Edited by Josh W. on 12-11-2009 01:08 PM
    Josh W.
    Certified TestStand Architect
    Formerly blue

  • HT201320 where can I get a information book on operating a 5c IPhone.  I do not know how to do much but tex and call

    I lost the answer about getting a information book on operating a 5c phone

    <http://manuals.info.apple.com/en_US/iphone_user_guide.pdf>

  • Serviced 4x within 5 Months: Can I Get a New Machine Replacement?

    After much consideration, I made the PC to Mac switch, and bought my first laptop and Mac product: a iBook G4 from macmall.com, in late December 2005, right before leaving for a spring semester abroad.
    In about a month, I had my HD replaced under the standard 1-year guarantee, at the local service center (France).
    About a month after that, my airport card stopped working.
    When I got it back, I took it home and found a blue screen. I took it back and they said that there was another problem, likely something with the motherboard. That was fixed.
    A few weeks ago, I had another problem where my computer would only start up to the blue screen again. I still don't know what it was (in service currently) but it is a hardware problem, and the 3rd "major" problem (apparently Apple doesn't consider airport a considerable problem).
    Losing information from the HD failure and having to get my computer serviced 4 times within 5 months has been very frustrating and disappointing. While abroad, my computer was supposed to play a central role: allow me to do work (for my classes, to apply for internships/scholarships) and very important personal support (maintain personal contact with friends/family, photos, music).
    Although my iBook will be repaired by the time I return home to CA in 3 weeks, I want to ask Apple for a replacement machine.
    I feel a mix of suspicion about the competency of the authorized Apple Service Center and loss of faith in my machine.
    --> Do I have a case, especially given that my iBook will likely be working by the time I call in about 3 weeks (I'm still in France and thought it'd be a headache to try to get a replacement abroad)?
    I also want the replacement to be a macbook.
    Given that I had what I consider the most aggravating problem in the first month or so, a hard drive failure where I lost all the valuable data I brought for use/support while abroad, I wanted to argue that I get the equivalent of the product I bought when my ibook went awry. I see the macbook as the equivalent of the ibook.
    --> Do I have an argument? Or is it unlikely that I can get a macbook for my ibook, considering they probably want to get rid of all remaining ibooks in stock?
    Also, how likely is it that Apple will propose to refund the amount I paid for my computer (which I don't want), given that..
    - I ordered through macmall.com?
    - I paid 994 dollars for my ibook, and the macbook is 1,099?
    Basically, I would appreciate insights on how realistic my desire to ask for a macbook replacement for my ibook is, given my situation.
    Thank you in advance! I hope to call around July 10th!
    P.S. If they agree to give me a macbook, would it be possible for me to ask to pay a little extra for a Superdrive?
    Or pay the difference for even a Black macbook? Or do you think I could make a case for a Black macbook to replace my iBook?
    iBook G4 Mac OS X (10.4.2) 512mb extra ram added when initially ordered from macmall.com

    Welcome to the Apple Discussions!
    If you get a perfectly working iBook back this time, I don't think you'd have any basis to ask for a complete replacement. Why would they replace a working computer?
    However, if I were you, I would call Apple Customer Relations and let them know that if something breaks again, you will be expecting a replacement computer. Be friendly and firm with them. Be prepared with the dates and details of the previous repairs (parts that were replaced, people you talked to on the phone and the length of time you were without your iBook). See what they have to say about that.
    If they do agree to replace your computer if it breaks again, there's no guarantee they'll replace your iBook with a MacBook. Those details will have to be worked-out with your Apple Customer Relations contact. (In the U.S., you have to call AppleCare Support, ask to talk to an operator and then ask the operator to connect you to Apple Customer Relations.)
    -Doug

  • How can I get reliable information on when faults ...

    How can I get reliable, helpful information on when the faults with my phone line and broad band will be fixed?
    My provider (talktalk) upgraded us to fibre on 17/11/13  but we only got 2MB (instead of 36MB).  Openreach were put onto it and things got progressively worse.  As from 17/12/13 we have had NO land line and NO broadband.  I have spent hours chasing talktalk on the phone (they promise to give me updates in 48hrs but never do) but am getting nowhere.  I am gven inaccurate conflicting infirmation on each call to talktalk.  I am told that openreach have dug a hole but there is no evidence of this between our house and the fibre cabinet in the village.  I am told thay are out again digging a hole but this appears to be completely ficticious.  I am continually promised an update in 48 hrs but nothing changes.
    It is not clear why we have lost ALL connection.  There are several lines in the cable coming to our property but it seems that they have cut us off ompletely.  This is VERY inconvenient and VERY frustrating.  We have to rely on poor mobile phone signals for emergency calls.  I am about the cancel the direct debit to talktalk in absence of any reliable information or prospects of the faults being fixed.
    I want to communicate directly with wheover is working on this to get accurate, reliable information on what the problem is and when (or if) it is likely to be fixed.

    Thank you for this information.  I had thought that this forum covered any issues that related to BT or one of their companies, ie Openreach.  Indeed, the reson for trying this forum was that I am getting nowhere with Talktalk and there is no other way for me to deal with Openreach.  A total catch 22 situation!
    If anyone has any otjher suggestions beside keep on banging away at Talktalk, please let me know.  Ihave used up my mobile allowance calling them.  They just blame Openreach (although also giving conflicting information/reassurances on the status of the fault/repair) so I am stuck in a never ending loop.
    I fear that the solution to the problem may be the replacement of a 1000m of cable leading to my property and Openreach do not wish to do this.  They even had the cheek a couple of week ago to send a text saying the fault had been fixed even though we were quite clearly still without any landline or internet connection!
    All I can do is stop paying but I am simply left with no service.

  • How to fix this error "this iPad is not able to complete the activation process. Please press Home and start over. If the issue persists, please visit your nearest Apple Store or Authorized service provider for more information or replacement"?

    How to fix this error "this iPad is not able to complete the activation process. Please press Home and start over. If the issue persists, please visit your nearest Apple Store or Authorized service provider for more information or replacement"? When I plugged in my iPad this popped up!

    Hi csreddy, 
    If you are receiving a message to contact an Apple Retail Store or Authorized Service Provider for help updating from iOS 3, click on the link below to initiate that support:
    Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support
    http://support.apple.com/en-us/HT204204
    Update your device using iTunes
    If you can’t update wirelessly, or if you want to update with iTunes, follow these steps:
    Install the latest version of iTunes on your computer.
    Plug in your device to your computer.
    In iTunes, select your device.
    In the Summary pane, click Check for Update. 
    Click Download and Update.
    If you don't have enough free space to update using iTunes, you'll need to delete content manually from your device.
    Find out what to do if you get other error messages while updating your device.
    Last Modified: Jan 12, 2015
    Apple - Find Locations
    https://locate.apple.com
    Contact Apple for support and service - Apple Support
    http://support.apple.com/en-us/HT201232
    Regards,
    - Judy

  • How to get desktop information in background?

    Dear all,
    I need to get desktop information, such as computer name, when running program in background. How to do that? Thanks.

    I got the answer for you:
    DATA: BEGIN OF usr_tabl OCCURS 10.
            INCLUDE STRUCTURE uinfo.
    DATA: END OF usr_tabl.
    DATA th_opcode(1) TYPE x.
    DATA: size TYPE i.
    CONSTANTS: opcode_list LIKE th_opcode VALUE 2.
    CALL 'ThUsrInfo' ID 'OPCODE' FIELD opcode_list
    ID 'TAB' FIELD usr_tabl-*sys*.
    DESCRIBE TABLE usr_tabl LINES size.
    READ TABLE usr_tabl INDEX size.
    WRITE usr_tabl-term.
    From:GUI_GET_DESKTOP_INFO is not worked when run in background

Maybe you are looking for