IQS Notification - Workflow

Hello Friends,
1) What is concept of notification type?
2) I have a new requirement where I need to create a notification number for specific notification type through <b>Inbound program</b>. How to do that?
3) As per my understanding we process all Notifications through IQS22.
How do we configure the screen sequence while processing the notification?
<b>My requirement is it ahould follow different screen sequence depending on type of action/process via IQS22.</b>
4) I need to create notification and trigger workflow for the same.
I hope these questions make sense.
Points will be rewarded for sure!!
Thanks
Shital
Message was edited by:
        shital phadake

Hi shital,
I am having the same questions can please post the answers for that questions.
Thank U.

Similar Messages

  • IQS Notification and Workflow

    Hi,
    I would like to get some help in using the IQS Notifications. I am a novice in workflows.
    1) I had added custom tabs to the IQS1(Create notification) transaction screen. Is it possible to trigger a workflow once the notification is saved?
    2) Is there any SAP internal workflow that is triggered by default when a notification is created?
    3) Also, I would like to take the inputs from the user as to who has to approve next. In the custom sub-screens, i have input fields to get the next level approvers. There are upto three levels of approvers. If I want to trigger my custom workflow,
    what has to be done to make this Nofitication appear in the 'Worklist' IQS8 transaction of the manager for approval??
    Please help.
    Thanks in advance.
    Regards,
    Anand.

    Hi Anand,
    The answer to your questions are:
    1) Yes.  There is a business object (BUS2078) for QM notifications and some standard templates - WS24500047 is but one - to do the same. 
    First things first:  is the event being published.  Tunr on the event log using SWELS, create a notification using IQS1, and then check the event log (SWEL) to see if the event BUS2078.created is there.  If so we may go onto the next step
    2)  Yes.  Once you are sure the event is published, go to transaction SWETYPV and activate the event linkage for BUS2078.created to WS24500047.
    3)  Can be done with some effort.  You will need to create a child object to BUS2078, set it as a delegate in SWO6, and add your new fields as attributes of the child object.  You will then copy WS24500047 into your own namespace (using SWDD) and look at changing node 349 to send to 'Expression' <your new attribute>.  Dont forget workflow using an org assignment model so you must concatenate an object type with your approvers (ie If user abc123, you would need to use the identifier 'US' (for SAP user) so it would become USabc123)
    This is not a major job, but some attention to detail will be required.
    Regards
    Gareth

  • Regarding absence of notification workflow

    hi all experts,
          i have a issue on workflow. suppose sender leaves a approval.now recipient decide whether he will approve it or not...absence of notification workflow.now i have to do that if recipient's absence reach beyond 5days,approval will be automatically approved. i need to know what steps r to be used for this?plz send the steps...

    This can be done using the deadline monitoring. Give deadline for 5 days and in case deadline is reached, give a step process control and remove the work item. This will give you a different path altogether in the workflow. In this path, just approve the absence notification through the background.
    Hope this clarifes your question.
    Regards,
    Hari

  • Cancelling notification from Mailer notification workflow

    Hi,
    can a notification be cancelled from Mailer notification workflow based on item_key or notification_id?
    thanks,
    Durga

    can a notification be cancelled from Mailer notification workflow based on item_key or notification_id?yes,
    Workflow Adminstrator --> Status Monitor --> Provide 'Internal Name'(check wf_notification table to get it against nid) and Item Key
    Click workflow Detail tab and if workflow is active then you will see cancel workflow tab at bottom left.
    Thanks,
    JD

  • PM notification Workflow

    Dear  i want to implement the PM notification Workflow means if a user creates notification and release and save immediately one email should trrigered and will come to outlook  is there any customizing setting required for this event or only through ABAP that can be possible  if customizing required through which options i can do this settings
    regards

    hi,
    You can look at BO BUS2038 & template WS20000317.
    http://help.sap.com/printdocu/core/print46c/en/data/pdf/BCBMTWFMPM/BCBMTWFMPM.pdf
    The business object Maintenance notification is a means by which internal company notifications are entered and managed in Plant Maintenance.
    Structure
    The following types of maintenance notification exist:
    o  malfunction report (notification of a malfunction or problem)
    o  maintenance request (request for tasks to be carried out)
    o  activity report (documentation of actions that were carried out)
    A maintenance notification contains one or more items. An item describes the symptoms that have arisen, the cause of the problem, the part of the object affected, as well as the tasks and actions that were performed.
    If this doesnt solve your requirement.you can enhance this BO & delegate to a zbo.
    Regards
    Keerthi

  • Service notification workflow

    Hi guys,
    I need to work with a service notification workflow but actually I know nothing about what method and task I can work with.
    I managed to create the service notification but this notification must be approved by a superior, this later can either validate it or reject it, if rejected the user can modify it and if the notification is validated the user can create the sales order.
    The most important is that the user MUST NOT have the possiblity to create the sales order unless his superior validate his notification. How can I avoid user to create sales order while he is creating service notification??
    I have a short deadline so any help would be useful.
    Thanks.
    Edited by: Alvaro Tejada Galindo on Apr 9, 2008 4:28 PM

    Look for a standard workflow for service notification in tcode PFTC.
    If there is not one, check tcode SWO1 for business object BUS2038 and make a workflow using the methods in that object.
    activate the triggering event in the workflow (bus2038.created or something like that.
    activate the event trace in tcode SWELS.
    Make a notification.
    Check tcode SWEL if a workflow is started by the event.
    Be sure to do the agent assignment.
    Good luck,
    Bert

  • Extended Notifications - Workflow Inbox link not working

    Hi,
    I have configured SWNCONFIG to send Extended Notifications. E-mails are being sent but the link for Workflow Inbox (configured in Subscription Settings - SHOW_INBOX_AS = LINK1) only takes to the enterprise portal home page not the inbox. I have search to have this fixed but with no luck. Does anyone know how to solve this?
    Thanks in advance.

    I have follow the configuration in this links:
    Configuring Notifications (View Cluster) (SAP Library - Embedded Processes (SAP Business Workflow))
    Subscription (SAP Library - Embedded Processes (SAP Business Workflow))
    It does not refer any specific link to the inbox. Only to activate the service: default_host  → sap  → bc  → workflow → shortcut
    And to use SHOW_INBOX_AS = LINK1 and define the portal url in parameter WG_HOST in General Settings. In addition the url while navigating in the portal is always the same (e.g either on the home page or in the workflow inbox), so I guess its the system job to re-direct to the Workflow Inbox, but this does not seem to be happening for some reason. 

  • Better way of Sending E-Mail Notifications -- Workflow or Function Module ?

    Hi All,
    I have an implicit enhancement written in a t-code and based on some conditions I am creating event which inturn will trigger the workflow which inturn send e-mail notification via send mail step.
    My question is:
    Which one of the ways is better in terms of performance or overhead to send an e-mail notification. (There are no Approval processes in the workflow.. Just One Step E-mail Notification).
    1) In the Implicit Enhancement, Trigger an event which inturn will trigger the workflow and e-mail is sent via send mail step.
    2) In the Implicit Enhancement, Send the e-mail notification via standard function modules available... such as
       "SO_OBJECT_SEND", "SO_DOCUMENT_SEND_API1".........
    Would be grateful if someone can post the Advantages and Disadvantages in the above 2 ways of sending e-mail notifications..
    Regards,
    PR.

    Just to throw in some additional factors, consider exception handling:
    An event-based send mail step is decoupled and thus independent of your application. This means your exception handling is separate. It means you do not need to hold up the transaction if there is a failure. All this depends on how important the mail is. You could of course add validation code to ensure the mail address is valid and send it elsewhere if not.
    Regarding performance, consider how often this happens. If it's an infrequent occurrence then I wouldn't worry about performance. Hundreds or thousands a day is a different story.
    So the answer is:
    Workflow for low-volume scenarios (low performance impact) that are important (better error handling in WF),
    Direct mail for high volume and noncritical
    In between these, use whatever you like
    One more thing to perhaps consider the future. What are the chances of the mail being replaced by a work item in furture? Sometimes it's only by observing a process after go live that you can identify the best solution. e.g. you may decide to replace the mail with a "Please go fix this" work item because you need deadline monitoring

  • Calling standard quality notification workflow from portal

    Hi
    I have front end screen designed in webdynpro, which is for creating a CAPA request in QM. This creates a quality notificaiton in the system.  When this notification is created, the standard workflow would be called and the recipient wold get a workitem in his inbox to work on that notification.
    I am completely new to workflow, I am not able to understand, how do I merge the standard workflow to the  portal. How do I know what exactly the standard workflow do and do I need to enhance it for my purpose? any 1 more queston is, is it possible to enhance standard workflow?
    In my requirement, there are multiple user roles, after moving forth and back and with some approvals my notification would get closed.
    Any pointers in this regard are verymuch helpful.
    Thanks a lot.
    Regards,
    Pallavi.

    Hi AM,
    hope you have delegated your Z to your main BOR.
    Check in SWO6 if that entry exists.
    Go to SWO1 tcode enter your ZBOR (which you delegated above) and click the GENERATE button on the application toolbar.
    Later go to your custom WF, check if the Basic Data has the main BOR and event as entry (since you have delegated ZBOR, no need to enter ZBOR and event as entry, you can use main BOR)
    If this is also done, check with bindings as our friend RB said.
    Hope it helps.
    Aditya

  • User name as sender in notification workflow

    Hi all,
    My requirement is that when sending the notification to the user from workflow ,
    i need the sender name as initiator of the workflow ????
    please help me out ...
    According to the Design  the task  SENDTASKDESCRIPTION   (background task) is displaying only the  sender name as Batch name(report Schudled in back ground) i need this  name to be changed..
    Thanks in advance..
    Dhava.

    HI Dhava ,
          Background tasks in workflow are performed through generic user WF-BATCH.
    As a part of manual maitenance of WF-BATCH , you can assign an email id to it .
    Then all emails will flow through that mail id .
                            But if you want everytime the sender should change as per changing
    wf-initiator , this can  be achieved through a custom BOR using FM SO_NEW_DOCUMENT_SEND_API1.
    hope this helps.
    Thanks,
    Sahiba

  • Deadline notification workflow wizard

    Hi All,
    We had set up a modeled dead line notification using the workflow wizard.
    We currently want to modify the same. The system is creating a new deadline notification instead of overwriting the existing one.
    Could you kindly guide us as to how we can go about rectifying the same and keeping the new change.
    Cheers,
    Belinda Clarke

    Hi,
    Try testing with a fresh new object.
    Save and activate.
    Regards,
    Punit.

  • MSS PCR Notification/Workflow

    Hi,
    We have been trying to use the MSS PCR for Separation.  We are able to successfully submit the PCR however, there are no workflows triggered. 
    Appreciate if you can advise on how to setup to trigger workflow.  Alternatively, appreciate advise on how to know where the notifications are sent.
    Thanks,

    PCR Workflow can be activated using the Tcode PCRWF. You can know the status of the workflow by checking the workflow overview for the Notification using Tcode IQS22.
    ~Suresh

  • E-mail notification - workflow

    Could anyone help me to configure the simple email notification through Workflow?  For example when new records are added then send an email to notify certain users that new records are added.
    I am good with the notification step in the workflow but not sure what are the other configuration needed.  Is there any email server configuration is needed?
    Anyone  can help me to list all the configuration steps for this?
    Thanks
    Mike

    Hi there
    Steps needed:
    1. Mail server setting for enabling MDS to send emails. For this in the mds.ini file you need to add the mail server name and domain.
    2. Define users in MDM with correct mail IDs active for the mail server defined in step1.
    3. Use Notify step with users/roles which you have already done.
    regards
    Ravi

  • PM Notification Workflow - Notify orginator of notification when completed

    Hi all,
    I am new to workflow and I have a customer requirement to notify the creator of a notification when the order has been compelted. What is the best way to handle this request? Notification is created then coverted to Maintenance Order by techincian then the order is compelted by technician and this compeltes the Notification. I have activated workflow WS20000317 but I do not know how to modify WF to notify the originator of the notification when completed.

    Mike,
      This standard WF might not be suitable for your requirement. There are various ways to satisfy your requirement.
    You could use the the user exit IWO10004(Maintenance order: Customer check for order completion) or IWO10009 (Maintenance order: Customer check for "Saving") to send a email to the originator using the FM SO_NEW_DOCUMENT_SEND_API1(or other send email FM).
      If you would like to keep these outside the standard flow, then you could create a separate standard task which basically calls a method in a business object to send a email.You could trigger this when the system status of the order is changed to TECO through config using transaction BSVW.
    Regards
    Narasimhan

  • Extended Notification Workflow Problem

    Hi,
    I have configured Extended Notification by using SWNCONFIG transcation code for 3 scenorios. For the first 2 scenorios, it is working fine. ie. Users getting an e-mail to the outlook with 'Execute Work item' link.
    My problem is for the 3rd scenorio, configuration is not working for this. SWN_SELSEN report is not picking up the notification. I configured the 3rd scenorio same as the first 2 scenorios. I tried all the different ways. Still it is not working. i.e SWN_SELSEN is not at all picking up the 3rd notification.
    Please let me know if any one facing the same problem.

    Hi PR,
    Please find the steps below,
    1. Created new Category
    2. Assigned message templates to new Category
    3. Created new subscription:
         Delivery Sch: Every 15 minutes
         Delivery type: EMAIL_HTML
         Granularity: One message per Notification
         R Address: *
         R type: Internal SAP user
    4. Filter Basic:
        Copied standard ALL_DELTA & ALL_FULL filters and named it as Z*.
        Assinged main filter ALL_DELTA to ZALL_DELTA and ALL_FULL to ZALL_FULL.
        In the ZALL_DELTA, the parameters are ALL_DELTA: 'X' and TASK: My task number.
         For ZALL_FULL, i have assinged only TASK number.
    5. Created Schedule Selection and Delivery Selection within 15minutes interval.
    Everything i created for the same as scenorio 1 & 2.

Maybe you are looking for