IR8A-Assignment to valuation model is missing

Hi Friends,
when i run IR8A program i am getting below error .how to solve this issue , is there any note or anything avilabale to solve this issue ?.we have upgraded our HR sytem to 70 level recently
There is the error message when we run IR8A report via T-code PC00_M25_NCT8A, below is the error message
"Assignment to valuation model is missing for calculation process 25 SGLS
Message no. HRSEN00107
Diagnosis
There is no entry in the assignment table for valuation model and rounding rule (V_T525S) for the return value for feature SENOR on the key date 07.12.2007 for the selected calculation process 25 SGLS (country grouping, calculation process, process step).
At least one valuation model must be assigned to each calculation process in view V_T525S.
Procedure
Make an entry for this calculation process and return value for feature SENOR in view V_T525S (Assignment of Valuation Model and Rounding Rule).

Hi Tulasi,
From the error : In V_T525s for calculation process SGLS maintain valutaion method like SGVM and rounding rule 0YMD
and maintain the corresponding return value of the feature SENOR in the field feature return.
Hope this helps you.
Regards,
Kitchlu

Similar Messages

Valuation Type is missing for Material and Batch

Hi Experts,
I am facing issue related to delivery.
While creating Order to cash cycle for one sales area, there is no error at all, but when I am trying to repeat the same cycle with same customer and material, different sales area and document type, I am not able to save delivery document. and receive error as "Valuation Type is missing for Material X and Batch Y".
Kindly suggest possible errors.
Regards,
Himmanshu

Check whether the required Valuation type is maintained in material master. Also, update the error message number.
G. Lakshmipathi

Dealer Portal - Vehicle Management System - Personalization - Web Dynpro component assignment for business partner is missing

Hi,
In the Dealer Portal, Vehicle Sales Role --> Personalization.
I am getting below Warning message.
The Web Dynpro component assignment for business partner is missing.
As per my investigation found below.
Since address formats are different for each country, you can define in the Customizing activity Assign Web Dynpro Components to Country-Specific Address Formats under SPRO --> Logistics Execution --> Dealer Portal which Web Dynpro component you want the system to use for displaying end customer addresses.
BUT do NOT understand the name of WebDynpro Component to provide.
What are the entries or WebDynpro component names to fill in below?

Hi Hussain,
Could you share the step-by-step solution? Thanks.

Assigned to valuation type to plant

Hi gurus,
Plant is assigned to valuation category but i want to maintan the valuation type(alrady exist for other plant) for plant.
Pls guide me
Dev

Hi
The valuation type specifies the individual characteristic of the valuation category.You can define is OMWC
The Split Valuation settings are as follow:
1.SPRO> MM>VALN AND ACC ASSIGNMENT> SPLIT VALUATION> Acitvate Split Valuation
2.SPRO> MM>VALN AND ACC ASSIGNMENT> SPLIT VALUATION> Configure Split Valuation
Click on Golbal type: create your own valuation types as Type 1, Type 2 etc
Click on Global categories:create your own Valuation Category as Type(T) and
Activate all valuation types(Type1, Type2 ) for your category(T)
Goto MM01, enter materialu2026u2026u2026u20261st enter valuation category and save & again enter MM01 enter the Valuation type as Type 1 and maintain price for it and repeat the same for all the Types.
When you create a PO for split valuated material it will ask for valuation type and you can enter your required valuation type and save.
regards

No assignment to org model in PPOME possible

Hello,
When I try to assign in the org model/PPOME (ECC6.0) a person to a position, the system allows that for some persons u2013 for some not. If not, the message u201CNo entry found, 5W800u201C is issued. If I would try to create the relationship A/008 via PP02, the system issues u201CValidity period of record not within validity period of P 0000XXXX, Message no. 5A039u201D.
Can anybody please explain me whatu2019s going on?
T770S0 is maintained in the following way:
PLOGI ORGA X    Integration Switch: Organizational Assignment
PLOGI PLOGI 01 Integration Plan Version / Active Plan Version
RHINTECHECK for personell no. 0000XXXX: all 12 (time-related) records of IT0001 are wrong (error) and the report suggests:
a. Check whether the person is marked in open processes
--> This seems not to be the case
b. Check your organizational assignment, either in infotype 1 or in the organizational structure in the above mentioned period.
--> I think this is also not the problem as org unit and position (PLANS, STELL) are both empty in PA0001.
I am new to HR-module, please explain what is missing, Thanks,
Angie

Hi,
thanks for your answer. Regarding the questions:
> How did you get the employee records into PA0001?
The employee records were transferred from another system into my system via ALE. In the source system the records were created via an interface (I assume). In the source system OM is not used.
> What about the emplyees that you can assign to a position? Do they have a position in PA0001?
No, they donu2019t. All records havenu2019t a position assigned in PA0001.
> Can you find other differences between the employees that work and the ones that don't?
There is only one difference for the employees who donu2019t work: In PA30 on IT "org. assignment" is field personnel area two times displayed with two different values, even that it is the same field:
On the top of the screen:             P0001-WERKS, screen number 0100.
Section enterprise structure:     P0001-WERKS, screen number 2000.
From PA0001-table I can see that these employees have changed their personell area in the past (in the source system). Those records were transfered into my system via ALE, too.
> Check dates to make sure that your employee is active within the dates you try to assign him.
The employees are active in the related period.
Please advise. Thanks,
Angie
Edited by: Angie012 on Feb 14, 2011 9:48 AM

Function Model "FILE_VALIDATE_NAME" missing!

Hi Experts,
When I run a report requiring downloading file from server, an abap dump shown, claiming function model "FILE_VALIDATE_NAME" is missing!
Can you tell me how to fix it?
Is there any notes that I can import to get that?
Many thanks!
Kelvin

Hi Hao,
FILE_VALIDATE_NAME is missing in my systems too.
I can provide a work around as the documentation says FILE_GET_NAME is used in it. you can replace the function module with it and do a validation by comparing the filename against the selection screen entry.
If it matches file validation is done.
Check the Function Module FILE_VALIDATE_NAME - Logical File Names - SAP Library
documentation for more details.
Regards,
Kannan

Logical model fwd engineer to relational model. Missing FK relationships

We are experiencing missing relationships in the relational model when engineering from logical model to the relational model. The logical model objects have properly defined primary keys defined. We are using SQL Data Modeler v3.1.700. Any suggestions on how to engineering these relationships without deleting the objects from the relational model.
Thanks,
Ed

Hi Ed,
I presume you had some relationships in the Logical Model that you were expecting to be engineered to Foreign Key relationships in the Relational Model.
Please can you provide more detail to help resolve your problem. For example:
Was the problem on an initial engineer from the logical model? Or on a re-engineer?
Are you using Entity subtyping in your Logical Model?
Are there any relevant error messages in the log file? (This is normally file datamodeler.log in folder datamodeler\datamodeler\log.)
David

User defined Catalog type u0093Su0094 - Valuation code field missing

Hi Quality Experts,
I have created a user defined catalog type in customization coping the catalog type 3.
This is required for authorization purposes.
Transaction Code : QS51.
For system defined catalog type 3, in QS51 all fields are visible.
Hence selection set can be created.
For user defined catalog type S which is a copy of 3,
for the same transaction code QS51 many field are hidden.
Hence selection set can not be created.
15 Columns are existing.
S.No     System defined Catalog Type "3".     User defined Catalog Type "S".     Remarks
1     Code Grouop     Code Grouop     OK
2     Code                      Code                      OK
3     Short Text for Code     Short Text for Code     OK
4     Long Text for Code     Long Text for Code     OK
5     Valuation Code     MISSING                     THIS FIELD IS MISSING
6     Quality Score     MISSING                     THIS FIELD IS MISSING
7     Posting Propasal UD     MISSING                     THIS FIELD IS MISSING
8     Long Term Char.     MISSING                     THIS FIELD IS MISSING
9     Stock Screen
                Backgr.                    MISSING                     THIS FIELD IS MISSING
10     Follow up action     MISSING                      THIS FIELD IS MISSING
11     Short Text      MISSING                     THIS FIELD IS MISSING
12     Changed By     Changed By     OK
13     Changed On     Changed On     OK
14     Created By     Created By     OK
15     Created On     Created On     OK
===========================================================
Total 7 fields are missing.
SAP Version : SAP ECC 6.0
Please guide.
With Best Regards,
Raghu Sharma.

Hi
when you have created new Catalog type by copying 3, did you check whether Selected Sets is flagged in the configuration?
regards
Srinivas

Problem creating operation assignment in ESR Model

I am trying to follow the step-by-step instruction from Franklin Herbas's blog - https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/8018. [original link is broken] [original link is broken] [original link is broken] It worked fine initially but I ran into problem when double-clicked on the small round icon on left-bottom side of the operation in the model, a window did pop up confirming creating object for the operation. But when I clicked on Create, nothing happened. No operation is created in the service interface. I have checked and there is no error in the Java log.
Any idea what I may have done wrong? I am running on ESR 7.1 SP4 on CE 7.1 SP4.
Regards,
Jiannan

Hello Jiannan
Regarding the first problem that you faced - Once you have done create assignment, use the open assignment option and see if that creates the operation. That should work.
Secondly, for stateless being grayed out, please open the Software component version properties (by double clicking on the Software Component version) and there you have an option of choosing the "Use of Interface Objects" - Please choose SAP NetWeaver 7.1. If you choose SAP NetWeaver 7.0, it means all your content in the Software Component Version should be 7.0 compatible.
In other words, your service interfaces should have only one operation and patterns such as (Stateless, Stateful) are not enabled.
Hope that clarifies your doubts.
regards
Rathish

Link between Rules and Organisation assigned in Rule Modeler

Hi,
Go to Transaction CRMC_BSP_ANALYZE,
Give Application Name: CRMM_ERM_RULES
It will go to Rule Modeler:
In this just click GO button. You will get the Policies. Click on the Policy you will get different rules.
When We drill down the rules and select a rule you can view ACTIONS tab.
In ACTIONS tab you can see Organisation Object and Outgoing E-Mail Address assigned to a selected Rule.
Can you please let me know what is table names and link to get the Organisation Object and Outgoing E-Mail Address.
Thanks a lot in advance.
Best Regards,
Azaz Ali.

Hi Azaz
To find the Organizational Object go to Transaction PPOMA_CRM the details you need are under field "ID"
The Outgoing Email address can be found under transaction CRMC_IC_FROMGRP.
Hope this helps
Regards
Arden

BP not able assign in Org Model

Hi Gurus,
Can you please suggest what all needs to be configured to assign the BP in Org Model. I am able to assign the user there but not the Org Model. I had the done necessary setting in IMG > Master Data> Set Up Integration with Organizational Management
Apart from this what else need to be done.
Regards
Arun Kumar

Hi Arun,
Can you please explain your query more in detail.
What I understand is you are not able to assign Owner i.e buisness partner to your position in the organization model?
Check if these settings are proper in Set Up Integration with Organizational Management
BUPA     SYNC     ON     BP: Integration (ON / OFF / CREATE)
CPERS     EEALE     X     Employee data is read using ALE
CPERS     PROLE     BUP003     Role of employee for business partner
HRALX     HRAC     X     Activate HR Integration
HRALX     MERID     X     Enter Integration Error in IDOC
HRALX     MSGRE     0     Recipient of Error Message When Creating BP
HRALX     OADBP          Business Partner of Standard Address
HRALX     OADRE          Address Necessary for Business Partner?
HRALX     OBPON     ON     Integration O-BP Activated
HRALX     OBWIG     X     Ignore Business Partner Warnings
HRALX     ONUMB     1     Business Partner Number Assignment (Org. Unit)
HRALX     OSUBG          Business Partner Subgroup (Organizational Unit)
HRALX     PALEO          Log: Organizational Units in ALE
HRALX     PALEP          Log: Employees in ALE
HRALX     PBPHR     ON     Employees Are Replicated from HR System
HRALX     PCATS          Integration P-BP for CATS Activated
HRALX     PINAC          Activate ALE Distribution of Inactive Employees
HRALX     PLEVE     3     Log: Detail Level of Error Messages (1 - 5)
HRALX     PNUMB     1     Business Partner Number Assignment (Employee)
HRALX     PQUAL          Import Qualifications
HRALX     PRTON          Log Active
HRALX     PSUBG          Business Partner Subgroup (Employees)
HRALX     PSYNO          Log: Organizational Units in Dialog
HRALX     PSYNP          Log: Employees in Dialog
HRALX     HRAC     X     Activate HR Integration
HRALX     MERID     X     Enter Integration Error in IDOC
HRALX     MSGRE     0     Recipient of Error Message When Creating BP
HRALX     OADBP          Business Partner of Standard Address
HRALX     OADRE          Address Necessary for Business Partner?
HRALX     OBPON     ON     Integration O-BP Activated
HRALX     OBWIG     X     Ignore Business Partner Warnings
HRALX     ONUMB     1     Business Partner Number Assignment (Org. Unit)
HRALX     OSUBG          Business Partner Subgroup (Organizational Unit)
HRALX     PALEO          Log: Organizational Units in ALE
HRALX     PALEP          Log: Employees in ALE
HRALX     PBPHR     ON     Employees Are Replicated from HR System
HRALX     PCATS          Integration P-BP for CATS Activated
HRALX     PINAC          Activate ALE Distribution of Inactive Employees
HRALX     PLEVE     3     Log: Detail Level of Error Messages (1 - 5)
HRALX     PNUMB     1     Business Partner Number Assignment (Employee)
HRALX     PQUAL          Import Qualifications
HRALX     PRTON          Log Active
HRALX     PSUBG          Business Partner Subgroup (Employees)
HRALX     PSYNO          Log: Organizational Units in Dialog
HRALX     PSYNP          Log: Employees in Dialog
Regards,
Shalini Chauhan

OKB9 Default Account Assignment for Valuation Area

Hello All,
I have done OKB9 as per Valuation area.
Now I am creating PO in that I m putting only Material Group, No material is used while creating PO.
In account Assignment I used to fill G/L Account but no default Cost Center is pop up.
How to do this?
Regards
KP

Either you have to set the default cost center in KA02 for the G/L account.
Or have a look into the blog Automatic account assignment OKB9 does not work

Model 2540 Missing first page of Excel Spreadsheet

First,on installing the software, problems. My system Win 8.1, wireless ISP Virgin,Office 2013 (Office 365)
4 print attempts.
1st Print page 2 and 3, but not first. Landscape
2nd Print missing page 1
3rd Print missing page 1
4th I print page one after copy and paste to new sheet, then change to two pages and second page only half of landscape info is printed. I cant use the word four letter starting with s or end on t, but that is what this is. Stop policical correctness and face the **bleep**ing music

Hey @TIHSREVERSE!
Thanks for posting on the HP Forums!
I would be happy to provide some suggestions that may resolve the issue! Are you getting the same issue from any other programs?
The first thing I recommend is to uninstall the HP software. After the uninstall is complete it would be a good idea to perform a disk cleanup in the computer. A disk cleanup will improve computer performance and clear temporary files that may cause issues during the install of software. Once the disk cleanup is complete you should restart the computer and re-install the HP software.
To uninstall HP software click here: Uninstalling HP Software
To perform a disk cleanup click here: Performing a Disk Cleanup
To download the HP software click here: Deskjet 2540 Software and Driver
Please post back and let me know how it goes!
Cbert
I work on behalf of HP.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

There is the error message when we run IR8A report

Hi SAP expert,
There is the error message when we run IR8A report via T-code PC00_M25_NCT8A, below is the error message
"Assignment to valuation model is missing for calculation process 25 SGLS
Message no. HRSEN00107
Diagnosis
There is no entry in the assignment table for valuation model and rounding rule (V_T525S) for the return value for feature SENOR on the key date 07.12.2007 for the selected calculation process 25 SGLS (country grouping, calculation process, process step).
At least one valuation model must be assigned to each calculation process in view V_T525S.
Procedure
Make an entry for this calculation process and return value for feature SENOR in view V_T525S (Assignment of Valuation Model and Rounding Rule).
I would appreciate you very much if you could advise me how to solve this problem.

Hi ,
I am facing the same error like this,
please let how did you solve this iisue ?
thakn\s

Report Builder Layout Model Missing

when I went to edit an existing report in 10g, I found the display of the Layout model is missing.
The fields and frames are all visible in the Object Navigator but they just don't show up in the layout screen.
Is there an easy way to fix this - or do i have to rebuild the report from the queries?
**** Doh **** Noticed the layout model was pointing to the Trailer pages - hence no details.
Apologies
Edited by: Elaine L on Feb 8, 2010 12:34 PM

hi,
first u check u r layout model ,
totally three sections are there
1) header section
2) main section
3) trailer section
i think u r checking the layout in header or trailer section
first u have to check in the main section
if its not there u can with other two sections,
in these three sections not available in u r layout , go to the object navigator in the main section --> select the some fileds and repeating frame
and apply the color of black of red in selected fields and repeating frames,
after that check u r layout model

IR8A-Assignment to valuation model is missing

Similar Messages

Maybe you are looking for