Is anyone getting the dreadful "No Service" on iOS 8? Weaker/no reception? iPhone 5 and up!
I am currently using an iPhone 5C and 4S. Upon updating from 7.1.1 to 8.0.2, both of my phone had literally been useless indoors now! I used to get a nice 3-4 bars within the comfort of my room to No Service. This is ridiculous by all means. I have to go to the backyard every now and then to make sure I get the texts that I need and to make calls.
I had:
- Reset Network Settings
- Replaced sim card
- Restored phone as new on iTunes
- Soft reset
- Confirmed with carrier to make sure I wasn't blocked or anything
None of those had worked since I'm by no means a newbie at this. If anyone knows how to fix this please let me know. I am at my ends wit. If an Apple Genius happens to stumble upon this, I am currently out of Apple Care and hope you guys would be able to take a look at it and give me a response free of charge. This is definitely on the software side and iOS 8.0.2 didn't fix the cellular issue.
Thanks!
I Updated my iPhone 4 and now have no service at all.
have also tried the restore and reset network options but no good.
i Have tried a few different SIM cards but it's the same on all networks.
i Wish Apple would at least try to fix these issues.
its very frustrating not having a phone. I think I will go back to using my htc and
give up with these iPhones. There are always issues with an update
Similar Messages
-
Every time i connect my iphone to itunes and trying to do a backup or get the new update it says i have to restore my iphone. and then that doesnt work, i tried to reinstall itunes but it doesnt work. i get this all the time. fix it please.
iTunes states " There's a problem with your Iphone, please contact apple service center " Also i took my iphone to a local service man and he told me the IMEI code has been corrupted and there's nothing that can be done about it. Please help, if you have any solution.
Thank you -
I have a few ipads, iphones and ipod touches of various models, and all run iOS6 of various types (whatever they were running when I last updated them before iOS 7 came along and stopped me being able to get newer versions of 6).
I tried iOS7 for a while but hated both the appearance and some of the things that changed.
My ipods have updated to a new version of iOS6 with the SSL fix.
I can't seem to get this option for the ipads or iphones.
Is it possible to get the important SSL update for iOS 6 for iPhone5, iPad3, ipad4 and ipad mini (not retina) without having to go to iOS7?
(It seems that I can get a fix by jailbreaking but I really don't want to do that if there's another option since I have no need for it otherwise.)
Thanks a lot.Thanks, that's helpful. I expected that answer, since I read a load of stuff about Apple pushing people to get iOS 7 despite it having people who disliked it, but was hopeful it was not the case
Some of the changes, like to calendar were just frustrating.
Not a big problem though - just means that the next phone and tablet hardware update I get won't be apple.
Thanks a lot for the swift and helpful replies. -
Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....I hit retry and it came up again. I hit ignore and it prompted me to hit finish so Itunes can open. I looked thru alot of these posts on here to try and resolve this problem myself but it's not working too well...I downloaded Itunes to my desktop so I can right click it with the program i downloaded called WinRAR. I extracted it and then went into the folder called Itunes64setup. I saw the file called AppleMobileDeviceSupport64 in there so I began to try and download it on it's own. Well that didn't work as I planned and got this error message:
Apple Mobile Device Support wasn't installed on your computer. The installer encountered errors before Apple Mobile Device Support could be configured. Your system has not been modified. To retry these operations at a later time,please run the installer again.
Well I tried to run it again and came up with the same message...I see that some people got great support to help them so I am hoping someone can help me as well. I know "b nor" is very qualfied and hopefully can help me! Please advise what I can do. Thank youHi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy -
While installing the latest iTunes version I get the following msg:"Service Apple Mobile Device failed to start.Verify that you have sufficient privileges to start system services. I already tried it from the installer Running it as Administrator and still get the same message. I click "ignore" and finish the installation but when I try to open it I get this "Runtime Error! R6034 An application has made an attempt to load the C runtime library incorrectly." I already uninstalled iTunes and all other applications involved and re-installed itunes from the itunes site and the problem persists. Please help!
Solving MSVCR80 issue and Windows iTunes install issues.
-
I Just updated my iPhone 4 to 7.1 oS. I am unable to connet to any network. I keep getting the "searching" No Service" messages on the top let corner of the screen. I also get a notice that says " "Unable to load network list. I need help... How can one resolve this issue?
No it's not stealing. They have an allowance that you can share with so many computers/devices. You'll have to authorize her computer to play/use anything bought on your acct. You can do this under the Store menu at top when iTunes is open on her computer.
As far as getting it all on her computer....I think but I am not sure (because I don't use the feature) but I think if you turn on Home Sharing in iTunes it may copy the music to her computer. I don't know maybe it just streams it. If nothing else you can sign into your acct on her computer and download it all to her computer from the cloud. Not sure exactly how to go about that, I haven't had to do that yet. I wonder if once you authorize her computer and then set it up for automatic downloads (under Edit>Preferences>Store) if everything would download. Sorry I'm not much help on that. -
After getting the dreaded gray/blue screen, I tried to run disk repair on the internal disk. I got an error message saying "Disk Utility can't repair this disk and restore your backed-up files. The volume Macintosh HD could not be verified completely." What do I do now? This is an iMac and I'm running 10.6.8.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it. See below for how to clone a drive.
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. Be sure you configure your initial admin account with the exact same
username and password that you used on your old drive. After you finish Setup
Assistant will complete the installation after which you will be running a fresh
install of OS X. You can now begin the update process by opening Software
Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
You may be able to backup your data if you have an erased external drive you can use. Before you do the above but after you have opened Disk Utility you can try to clone your drive:
Clone using Restore Option of Disk Utility
1. Open Disk Utility.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag
it to the Destination entry field.
5. Select the source volume from the left side list and drag it to
the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
Now this will only work if the drive is accessible and can be cloned by Disk Utility. Otherwise, you would need to access your drive from another Mac that you can connect via Firewire - Target Disk Mode. -
I'm trying to install iTunes on my pc and I get the error message "Service Apple Mobile Device Failed to Start. Verify you have sufficient privileges to start system services.
What do I need to do to get iTunes to install?Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
I have attempted to sync my new iPod touch 4th gen. with my current PC running Windows XP and everytime I attempt it I get the dreaded blue screen, here are the error codes- 0x0000007E; 0XC00000005; 0X00000000; 0XBA51B7C8; 0XBA51B4C4 any suggestions?
In the course of your troubleshooting to date, have you worked through the following document?
iPhone, iPad, or iPod touch: Windows displays a blue screen message or restarts when connecting your device -
When attempting to reinstall iTunes, I get the following message "Service (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services" Any help appreciated
Hi emelville,
Thanks for using Apple Support Communities. You may need to restart the Apple Mobile Device Service. This article has instructions that may help:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/ts1567
If that doesn't resolve the issue, I would recommend trying a thorough uninstall and reinstall of iTunes as described here:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Cheers,
- Ari -
I cant install I tunes I keep getting the following message: "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privelges to start system services." I have Windows 7 - can you tell me what is wrong?
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
I'm trying to download some purchased TV shows to my iPad Air. I keep getting the dreaded Download Error Tap to Retry Message. I've signed out of iTunes and back in. I've updated my software. I have plenty of room for them on the Air. We are taking a long flight this week, and I wanted to have something new to watch. I've read through lots of threads on this but I can't seem to find a good solution that I haven't tried.
If I can get them to download them on my iMac computer, can I then transfer them to my iPad? How is this done? (Please pardon an older lady's ignorance, and thank you for any assistance!)
JodyHello jody5758
Continue your troubleshooting with the article below. IT will walk you through checking the Date & Time as well as checking the settings of your router to ensure a proper connection.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Regards,
-Norm G. -
(final cut pro x 10.0.9 )After numerous troubleshooting tips, I am still getting the dreadful your disk have ran out of space, your events have moved or permissions have changed. This happened after I moved some files to another drive. They won't relink eventhough the files are there.
(final cut pro x 10.0.9 )After numerous troubleshooting tips, I am still getting the dreadful your disk have ran out of space, your events have moved or permissions have changed. This happened after I moved some files to another drive. They won't relink eventhough the files are there.
-
After upgrading iTunes, I'm getting the dreaded "iTunes has stopped working" message after launch. I've tried the troubleshooting tips on the Forum without success (though most are pretty old...). Fortunately, iTunes works on my other computers, but I have iPad backups on this one that I'd like to keep. Anybody else with this issue??
My inclination is that it is something in the projects or in the manuals being linked that is the culprit because that is where the consistency lies - projects were created identically and manuals all follow identical formats. The problem typically only occurs after the project has been successfully created and the manual is subsequently updated and I am syncing the manual in RH so I can generate a new AIR file. This is the first time the project has consistently corrupted every time I try to generate the Word document after linking it in RH. This makes little sense to me since it generated fine a couple weeks ago and I did nothing special when I updated it in Word yet when I tried to update it in RH, that is when it originally corrupted. The bottom line is that I cannot 100% trust that any project I run will work the next time. I end up just crossing my fingers and hoping for the best.
My problems seemed to start once I went to RH9 (from RH8) because we had upgraded from MS Office 2003 to the 2010 version and I needed 9 for the docx extension. Like I said, it is not all the time - I can be beating my head against the wall getting one of the projects to work, then create 3 more projects that have no problems and then the next one leaves me wanting to throw my PC through a window....
Deleting the CPD does not corrupt the project, it just removes my default linked document that allows me to circumvent linking the styles individually for that project. Once I have a manual linked and I remove the CPD, it just creates a new one. What I am saying is that if I delete the CPD file, it does not prevent the project from corrupting nor does it make the corrupted project viable again.
thanks!
Kathi -
when i try to download itunes i keep getting the error message " Service 'Apple Mobile Device' (Apple Mobile Device) Failed to start. Verify that you have sufficient privileges to start system services. Can someone help?
Hey craiglarkin,
First, I would try following along with the steps in this link:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
If you end up having to remove and reinstall iTunes and AMDS, make sure to follow the steps closely, including the order in which you uninstall.
Welcome to Apple Support Communities!
Have a great day,
Delgadoh
Maybe you are looking for
-
Error while using UTL_FILE package
I am getting error while using UTL_FILE package in apex 3.0 version Pls help me out.
-
Problems with Polish Language Characters
I'm using version 5.5 of Output Designer. I've included Arial CE as a softfont in designer. I can successfully display polish characters in a text field on my template, for example Wysyłka. When I run a Test Presentment, the text fields from my temp
-
Substitution variables in stored procedures
Help, anybody! I want to create a procedure that updates a column of a table, however I want that column and the new data specified at run time. I've tried writing a procedure that has substitution variables for the column and new_data values: CREATE
-
How to set two Star's TSP100 receipt printer on the same mac ?
Hello For my restaurant I use a FileMaker homemade software that can use two ticket printers of the same type (Star's TSP100 receipt printer). One is set as "Kitchen" in the underground kitchen and the other as "Desk" in the main floor. Software must
-
Windows 7, one computer, one library, multiple users
I installed iTunes 10.0.1 (64 bit) on a new computer running Windows 7. 1. I copied my old iTunes library from an old computer. 2. In iTunes, I changed my iTunes media folder location to C:\users\public\music\itunes\itunes media 3. I selected th copi