Is client Needs to be Mention in Sender SOAP URL

HI ,
I working on one scenario in which I am providing the WSDL (SOAP Sender) to sender system.
but they are not ok with the WSDL URL
http://iltlvsap19.sap.s.com:8000/sap/xi/engine?type=entry&version=3.0&Sender.Service=WS2RFC&Interface=sap.com%3ADn%3AEmpData%5EEmpData_OB
they are asking for to mention client also in above URL on which I am making this WSDL(XI Client)
http://iltlvsap19.sap.s.com:8000/sap/xi/engine?type=entry&version=3.0&Sender.Service=WS2RFC&Interface=sap.com%3ADn%3AEmpData%5EEmpData_OB/Client=200
plz suggest
Regards

>
gangadhar kh wrote:
> they are asking for to mention client also in above URL on which I am making this WSDL(XI Client)
> Regards
Gangadhar,
What they might be looking for is XI box credentials (username and password) to send data to PI. When creating the WSDL check the Sender URL and include the username and password if required.
Regards,
Pavan

Similar Messages

Web service client needs to share data with a SOAP Message Handler

I have a web service client that is built using WebLogic 10 clientgen. I also have a Soap Message Handler configured that will create the required Soap Headers for the web service call.
Creating these Soap Headers works great as long as the header data is static but the problem comes up when I need to place some dynamic data in these headers. The web service client has this data and somehow needs to pass it to the Soap Message Handler. It looks like I need to somehow have the client place this data in the MessageContext before the call so the data can be accessed by the Soap Message Handler.
How do I get access to the MessageContext from the client or is there a better way to do this?
Thanks in advance for any help you can give.

You may want to check the response to this previous post to see if it yields any ideas for you:
Not able to Pass header info to Microsoft MapPoint WebService using WLS10

HOW TO CREATE SERVICE FOR SENDER SOAP COMMUNICATION CHANNEL FOR ECC PROXY

Hi Experts,
I need generate the service for sender soap communication channel for target url to receive the inbound proxy.
my scenario is like SOAP to proxy. while using receiver proxy also we are planing using AAE method .
i am using SOAP sender and SOAp receiver communication channel .i need to provide the target url for this communication channel.
how to generate the url for this and what is the transaction code .
Please help us.
Regards
Ravinder.S

Hi Ravinder,
Q.my scenario is like SOAP to proxy. while using receiver proxy also we are planing using AAE method.
SOAP to Poxy in this case.
For sender SOAP system, we can generate the WSDL link in ID part.
for Reveiver proxy give the integration engine URL.
http://IP:PORT/sap/xi/engine?type=entry
how to generate the url for this and what is the transaction code
There is no transaction code for generating the URL.
i hope this will help.
Regards,
Kesava.

Client need to be opened for what all objects?

Hi Experts,
I need to list all the objects for which clients need to opened for customizing/master data download, for ex. when we are downloading condition records we need client to be in open/modifiable state, So what I need now is suggestions based on your experience wherever you feel that cleint needs to be opened for this activity .
Thanks for sharing your experience.
With Regards,
Mayank Choudhary

Hi Mayank,
Even I tried for the list of all cross-client download objects in vain. I figured a work around for this and found it helpful.
To check wether a particular object is downloading cross-client data:
1) Determine all the tables involved by executing CRM table SMOFTABLES with the adapter object name. (Ex: DNL_CUST_SHIP downloads data from the following tables: TINC, TINCT, TPRIO, TPRIT, TVSB, TVSBT.)
2) In order to check wether these tables are cross client or not, execute table DD02L in R/3 system with all the tables determined in step 1.
Ex: DNL_CUST_SHIP
Table : DD02L
Table name----
Client-specific
TINC----
X
TINCT----
X
TPRIO----
X
TPRIT----
X
TVSB----
X
TVSBT----
X
This means that none of the tables invloved in DNL_CUST_SHIP download are cross-client and can be downloaded without opening the client.
If there are any client independent tables involved then we need to open client and perform download.
Ex. DNL_CUST_CNDALL
The below mentioned tables are involved in DNL_CUST_CNDALL object download and are cross-client and hence the client needs to be open while downloading the object.
TMC1K
TMC1D
TMC1
T681
T682
T682I
T682T
T682Z
Hope this helps
Regards,
Aj K

5.7.1 Client does not have permissions to send as this sender - NLB

Hi there- we have an application which sends out email notifications to a third party vendor. The vendor was previously using Exchange Server 2010 and they have recently migrated to Exchange Server 2013. They have also implemented NLB and have two Client
Access Servers configured.
Our application has been spitting out "SMTP 5.7.1 Client does not have permissions to send as this sender" errors ever since the vendor has implemented NLB. As our application uses the IP address of the Exchange Server, we have tried specifying
the IP address of both the Client Access Servers but that did not help. We then tried specifying the IP address of the NLB which did not make any difference either. The vendor has confirmed that anonymous relay has been enabled on the receive connectors of
both the Client Access Servers. I must add that our application sits on the vendor's server and the application and exchange servers are in the same domain. The "Send From" email address is an existing mailbox configured by the vendor.
Telnet from the App server to the NLB on port 25 has gone through without any dramas.
Is there anything else we would need to check to get this working?
Cheers

Hi
Ensure that an dedicated relay connector is created in new exchaneg 2013 server
assign the correct subnets and the ip address of the app server into the relay connector
Run the below command to grant anonymous permission on the relay connector
Get-ReceiveConnector "Anonymous Relay" | Add-ADPermission -User "NT AUTHORITY\ANONYMOUS LOGON" -ExtendedRights "Ms-Exch-SMTP-Accept-Any-Recipient"
Specify the ip address of the mailbox server in your app server since the transport core services resides on mailbox server and cas server acts as stateless proxy
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com

Does my client need to have Adobe Story to review my script?

In one of the Adobe video's, Paul Trani shows how we can share a script. I can only presume that whoever gets the script, must have Adobe Story installed to be able to review the script. What does my client need to be able to review my script.
Thanks,
Kuhnen

Partially, yes. When you share your script with your client, he/she can access it in Adobe Story. But for that installation is not necessary, he/ she can access it through the web application (https://story.adobe.com). What your client requires is - an account with Adobe Story and an internet connection.
You can also export your script in one of the formats available and send it across.
Hope it helps

For existing data in BI, client need to take a call to park the same from s

hi,
friends,
For existing data in BI, client need to take a call to park the same from safety point view by copying the existing ODS
is it possible?if it is possible give me details.
thanks&regurds
sivaji

hi,
well when you copy an ODS only the structure is copied. to load the data you might need to create transformation and DTp to load data in the new ODS.
You need to load data manually. Copying the ODS will only copy the structure.
Regds,
Shashank

Client does not have permission to send as this sender

We have a CRM web application hosted on a server. When a user launches the site, the site provides facility to the customer to send the query into the system using the email. The website provides the filed for the customer to enter customer’s email ID. The
customer email address is used by the system to send the response back.
We are doing a new implementation for SMTP authentication for the emails send into the contact center using a public website. The flow of the system to use the SMTP authentication is:
Customer launches the website.
Customer chooses to send the his/her query using the email from the website.
Website asks for the customer’s address, so that the query can be
answered back to the provided email address say [email protected] .
We have an account configured on the MS-Exchange 2010 say [email protected]
So before sending the email the website system performs the SMTP Authentication using the credentials of [email protected]
Now the system creates the email MIME using the email address provided by the customer on the website i.e. say [email protected].
After successful SMTP authentication for the address [email protected] system starts sending the email.
Here we are facing the issue:
While sending the email if the customer’s address is also configured on the same exchange used by the system i.e. exchange on [email protected] is configured
then website system is able to relay or send the email.
If the customer’s address is not configured on the same exchange used by the system where [email protected] is configured then the system is not able to send the email it results into the error of: “Client
does not have permission to send as this sender [email protected].
In short if the website performs the SMTP authentication then it requires the FROM address configured on the same exchange used for the smtp authentication in the email MIME from address.
Configuration tries:
As suggested on various forums and at Microsoft tech group we tried following things but no success:
Checked the checkbox “Authenticated Users” selected “Accept any Sender”.
Created a new relay and given the IP of the machine hosting the website or trying to send the email
Run the command from the EMC “Exchange management console”
Add-AdPermission -Identity "Default Receive Connector" -User "NT AUTHORITY\Authenticated Users" -ExtendedRights ms-Exch-SMTP-Accept-Any-Sender.

You can create a new connector to which everything is permitted - eg New-ReceiveConnector -Name "Anonymous Relay" -Usage Custom -PermissionGroups AnonymousUsers -Bindings 10.2.3.4:25 -RemoteIpRanges 192.168.5.77

My client needs to be able to create a link to a document on the server in Incontext editor

My client needs to be able to create a link to a document on the server, but I dont want to allow FTP/File manager access as this gives him opportunity to delete pages and files.
How can you give him safe access without giving access to the files?

The only other way to upload the document to his site is to use Media Downloads, also known as Literature in some part of the system. Then, inside the InContext Editor you click on the link and and select page from my site, then link to the literature item created.
That's all.
Cheers,
-mario

Enabling HTTPS with Client Authentication for Sender SOAP Adapter on PI7.1

Hello All,
We are currently building up a HTTPS message exchange with an external client.
Our PI 7.1 recieved over HTTPS messages on an already configured Sender SOAP Adapter.
The HTTPS (SSL) connectivity works fine and was completely configured on the ABAP Stack at Trust Manager (TC=STRUSTSSO2)
Login to Message Servlet "com.sap.aii.adapter.soap.web.MessageServlet is required and works fine with user ID and password.
Now we have to configure the addtional Client Authentication.
At SOAP Adapter (Sender Communication Channel) under "HTTP Security Level"you are able to configure "HTTPS with Client Authentication".
But what are the next steps to get this scenario successfully in place?
Many thanks in advance!
Jochen

Hi Colleagues,
following Steps still have to be done:
- Mapping public key to technical user at Java Stack
As preparation you have to activate value "ume.logon.allow.cert" with true under "com.sap.security.core.ume.service" under Config Tool. At NWA under Identity Management at for repecively technical user the public key certificate
- Be sure CA root certivicate at Database under STRUSTSSO2
- Import intermediate Certificate under Certificate List at Trast Manager for the Respecive Server Note
- use Login Module "client_cert" which you have to configure under NWA\Configuration Management\Authentication for Components "sap.com/com.sap.aii.adapter.soap.app*XISOAPAdapter".
Many thanks to all for support!
Regards,
Jochen

HT5760 I need to be able to send a GROUP message!

I need to be able to send a GROUP message from my iPhone to the whole group of 36 people. Right now i have to inset/type each one of people names to start a new conversation thread. Any ideas?

As clearly indicated in the article from which the question was posted, this is not a feature of iOS.

Client does not have permissions to send as this sender

I have an Exchange 2013 setup. I have enable POP3/IMAP4. Most of users can send/receive message via POP3/IMAP4 from Outlook 2010/2007.one my account [email protected]
able to  receive message via POP3 but not able to send message . When this account send mail we got the following error:
Your message did not reach some or all of the intended recipients.
      Subject: report
      Sent: 10/10/2014 10:52 AM
The following recipient(s) cannot be reached:
      [email protected]' on 10/10/2014 10:52 AM
            550 5.7.1 Client does not have permissions to send as this sender
[email protected]
Thanks and regards,
Dipendra paudel
Dipendra Paudel

Hi Dipnedra
Please check wether the problematic account is in the
Protected Groups:
Title: AdminSDHolder, Protected Groups and SDPROP
Link:
http://technet.microsoft.com/en-us/magazine/2009.09.sdadminholder.aspx
If the answer is YES, please quit these groups or try to create another account to test this issue.
Regards,

"iMessage needs to be enabled to send this message?

What does "iMessage needs to be enabled to send this message" mean? I can't get my messages to send and when I try that pops up. What is it and how can I fix it?

I have a similar problem as the OP, I wished to disable iMessage just to avoid the complications of having two messaging systems. Also, I never use data and always keep it off in order to save battery. Third, I noticed that when using iMessage, sometimes others' messages to me reach me late, i.e. they would send it at 3 pm and I would receive it at 6 pm when I turned on my wi-fi (remember, I have data off always). For these reasons I chose to completely disable imessage.
However, for one of my contacts, I noticed that the "send" button was still blue, rather than green (as you know, green is for ordinary SMS while blue is for iMessage). When I try to send this person a text, I naturally get the "imessage needs to be enabled to send this message". I tried the solutions in this thread, but none of them worked.
However, I managed to find a workaround. First, I turned on iMessage, then I turned on "send as SMS if imessage not available" in the settings. Then, I disconnected my wifi and data so that imessage would not be available, then I tried to send an iMessage to the person in question (the one with the button stuck on blue). This time I did NOT get the error message, but the iMessage tried to send anyways, getting stuck when the bar was around 85% complete. Then, I pressed on the speech bubble being sent, and manually chose "send as text message"). Voila! the button suddenly turned green, and now I can send regular texts to that person again!

I need help for actionscript 3, sending php info to my email, website created in Flash cs5 pro

Hi, My name is David and I followed a course creating my own website from Lynda.com by Paul Trani. After that I created my first own webste. After I finished it, everything was working well in flash and firefox. I have only one problem and question concerning the feed back form for sending info from my website to my emailaddres. I created my website “LisbonDreamWalking”in Flash CS5 pro. I herein have a contact page, where people can send an email for a walk in Lisbon, date,the number of people etc. Now I want through my ISP / host funpic.org, that the input, info text fields to be sended to my emailaddress [email protected]. My mail URL adress iss: http://lisbondreamwalk.li.funpic.org This is a free host, so they don't work with forms like in the course, and I need some additional info for the php. Here is my HTML (Flash actionscript 3.0) for the sending I only have the red text to fill in (php), I was told by the adobe course.I really hope someone can help me?! Thanks in advance!
Instructions: 1. Add your custom code on a new line after the line that says "// Start your custom code" below. The code will execute when the symbol instance is clicked. */ send_btn.addEventListener(MouseEvent.CLICK, fl_MouseClickHandler_13); function fl_MouseClickHandler_13(event:MouseEvent):void {          if (thename.text == "" || theemail.text == "" || thetime.text == "" || thepersons.text == "" || themessage.text == "")      {           thankyou.text = "please fill out all fields";      }      else      {           // create a variable container           var allVars : URLVariables = new URLVariables();           allVars.name = thename.text;           allVars.email = theemail.text;           allVars.time = thetime.text;           allVars.persons = thepersons.text;           allVars.message = themessage.text;           //Send info to a URL           var mailAddress:URLRequest = new URLRequest("http.www.namewebsite.com/gdform.php");           mailAddress.data = allVars;           mailAddress.method = URLRequestMethod.POST;           sendToURL(mailAddress);           thankyou.text = "Thank YOU!";           thename.text = "";           theemail.text = "";           thetime.text = "";           thepersons.text = "";           themessage.text = "";      } }
H

Thank you Kglad, I am going to see if I can make it work. I will let you know!
Date: Thu, 13 Oct 2011 08:55:05 -0600
From: [email protected]
To: [email protected]
Subject: I need help for actionscript 3, sending php info to my email, website created in Flash cs5 pro
    Re: I need help for actionscript 3, sending php info to my email, website created in Flash cs5 pro
    created by kglad in Action Script 3 - View the full discussion
you missed part of the tutorial (or the tutorial is incomplete): send_btn.addEventListener(MouseEvent.CLICK, fl_MouseClickHandler_13); function fl_MouseClickHandler_13(event:MouseEvent):void{     if (thename.text == "" || theemail.text == "" || thetime.text == "" || thepersons.text == "" || themessage.text == "") { thankyou.text = "please fill out all fields"; } else { // create a variable container var allVars : URLVariables = new URLVariables(); allVars.name = thename.text; allVars.email = theemail.text; allVars.time = thetime.text; allVars.persons = thepersons.text; allVars.message = themessage.text; //Send info to a URLvar mailAddress:URLRequest = new URLRequest("http.www.namewebsite.com/gdform.php"); mailAddress.data = allVars; mailAddress.method = URLRequestMethod.POST; sendToURL(mailAddress);
}} var urlLoader:URLLoader=new URLLoader(); function sendToURL(mailAddress):void{urlLoader.addEventListener(Event.COMPLETE,completeF);urlLoade r.load(mailAddress);} function completeF(e:Event):void{ thankyou.text = "Thank YOU!"; thename.text = ""; theemail.text = ""; thetime.text = ""; thepersons.text = ""; themessage.text = "";}
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3969414#3969414
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3969414#3969414. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Action Script 3 by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Does child systems with 3 clients need 3 RFCs?

Hello
One quick question
Does child system that has 3 clients need 3 RFC conenctions to connect to CUA?
We have ECC with 3 clients. When I go in one client SM59 and create RFC connection to CUA, everything is good.
When I go in SM59 of other client and I create RFC(same as logical name of CUA) , it says it already exist since I created in my previous client
Any thoughts? I know from CUA I would need 3 RFCs for the 3 clients but from the child do I need 3 RFCs? If yes, its not allowing.

Yes, normally the logical system name is used and having this the same as the RFC destination helps.
But this does name a type of "name space" implication...
Perhaps you want to consider where you have your master system and use client side security (the authorization group concept for S_RFC_ADM, and S_ICF type DEST to call them?
Even if you restrict RFC, it will always need to do that which is is designed to do. Client side security makes sense in cases such as CUA.
Cheers,
Julius

Is client Needs to be Mention in Sender SOAP URL

Similar Messages

Maybe you are looking for