Is Comfort trade LTD is working under your company?

because i want to know if they are working under your company. I want to buy some gadgets in Comfort trade LTD and the name of the person that is working in Comfort trade is (removed per forum guidelines)

Hi WelYen,
Good question! This company is neither a Best Buy subsidiary nor one of our vendor partners, so I'd encourage you to err on the side of caution here. As always, do not respond to e-mails, texts, or messages via social media channels that request your personal information if you do not recognize the source of the message.
If you believe your personal information has been compromised, report it. Contact your bank, credit card company or other service providers and forward the email to the Federal Trade Commission at [email protected] Consumers are also encouraged to contact their local authorities when/if such events occur.
I hope this helps.
Aaron|Social Media Specialist | Best Buy® Corporate
Private Message

Similar Messages

$50 Minimum Trade for Any Working Tablet? How?

Is there any kind of information on how this is exactly supposed to work? I've tried twice now to trade in a couple of older Android tablets I have which work perfectly fine and are undamaged. I've been through a number of excuses about them being "not in our system" and such. So, can anyone answer how this trade in promotion is supposed to work?
1.) Is it any tablet, even if it's not in the system? I've tried suggesting they do it as a recycle but have been unsuccessful.
2.) Is it a gift card that may be used on a Surface Pro or do I have to use it on a Surface Pro? The issue with this is that I'm not 100% convinced on the Surface Pro until I read some user experiences and even if I do go with it, I'll get an i7 version which isn't even available until the end of August. The best I've been able to get is that they'll give me a $100 voucher (an IOU I guess) when/if I decide to buy one.
3.) I've seen the additional terms and conditions may apply at certain stores disclaimer which I completely understand. But, is that something the store has posted/can print out or is it something they can simply make up as they wish when they can't figure it out or don't want to deal with it? So far, my experience has pointed solidly to the latter.
Thanks,
Michael

Hello there fisa,
I’m glad to hear that you are looking to participate in our $50 Minimum Trade In and Up to the Surface Pro 3 promotion! These are great questions to ask, and I apologize if you seem to be having difficulty taking advantage of this offer in your local store with your two Android tablets.
To clarify, you should be able to trade in any working tablet (excluding Barnes and Noble Nooks and e-readers), even if it is not in our trade in system. To be considered working, it must power on and not have a cracked screen or water damage. The store should have an alternative process through our Recycling Program to fulfill this promotion for working devices not found in our system for trade in. As the gift card you should receive would be a normal gift card, you should be able to use it towards a tablet of your choice.
Additional limitations may apply at certain stores should the device be traded in under this promotion rather than recycled. Through our Trade-in Center, some stores may have municipal laws governing what we may and may not trade-in, such as whether it was purchased through us or someone else, meaning proof of purchase at Best Buy may be required. I would reach out to your local store for more information on additional limitations.
As you state that your Android tablets are not in our system, we should be able to trade them in under this promotion through our Recycling Program provided they are considered working. That being said, I am sending you a private message to gather further information about your experiences at the store so that I may research this issue. You may check your private messages by signing into the forum and clicking the envelope icon in the top right corner of the page.
Sincerely,
Tasha|Social Media Specialist | Best Buy® Corporate
Private Message

How do we do sales in MX while still working under US Set of books?

Hi,
We are on 11.5.10.2. We have following requirement and need your inputs. Unfortunately it involves customization and we are open to it. Please suggest.
We have sales happening in US and Mexico (MX). Current implementation has just 1 Set of Books defined and it is US-SOB. There are 2 Legal entities viz. US-LE & MX-LE. US caters to large number of customers and there are various channels for receiving those orders into our ERP. MX has very few customers and MX orders are created manually using US responsibilities. Picking/Shipping/invoicing documentation etc is generated in 3rd party systems and goods are shipped from MX. Mexico then charges the US entity as Internal customer and Intercompany AR is raised by MX to recover the manufacturing cost. This AR invoice is manually posted to MX-LE.
Business has now decided to up the sales in MX and cannot rely on the manual order creation, documentation process. They are quite familiar with the Sales cycle followed for US orders and want to create similar process for MX without creating a new SOB & Operating Unit! They want to use the US OM responsibilities to create MX orders manually. There are lot of 3rd party systems involved and environment is heavily customized. So, creation of new SOB would impact those systems and it will be a big project to roll out new SOB in Oracle and in those systems. So this option is ruled out.
There is a criteria to identify MX orders (based on ship-to, bill-to). We are now looking for a custom solution which will help us process the MX orders, create the AR invoice and then strip the MX sales data from the US-SOB at the end of month. Can we define new order type(s) for MX orders and associate an AR transaction type to the new order type(s) that has MX Revenue & COGS a/c on it? We want to capture the sales happening in MX separately and generate our own AR invoices. The 1st segment of the accounting structure is Company which identifies whether it's US or MX.
Any suggestion in this regard will be helpful for us to start with.
Thanks!

the most transparent way would be to set up an ipsec vpn allowing secure access to your ny system, in effect you would be giving her direct accesss to your lan
doing this properly requires some work
at your ny site i'd use a router to support inbound vpn connection as well as your general internet access and firewalling (if your existing router cannot do this you'll need a new one)
at the remote end, the mac has built-in vpn support, so as long as a compatible vpn router is used then it is straightforward
an additional benefit of this approach is that you would all be able to use the same vpn to get remote access to your ny network when travelling/at home etc.
a device like this... http://www.netgear.com/Products/VPNandSSL/WiredVPNFirewallRouters/FVS318.aspx
...might be suitable, but if you are not comfortable doing it in-house i strongly recommend discussing requirements in detail with a competent systems integrator, getting things wrong could compromise your security
as a short term solution to the file type changing on upload/download, if you use zip (or stuffit) to create a .zip (or .sit) archive of the files, then upload the archive, when you download and unzip i think the file type will be preserved

Dual monitor not working under Boot Camp on Mac Pro ATI HD 2600 XT

Recently got a brand new Mac Pro with ATI Radeon HD 2600 XT graphics card.
On the Mac side (Leopard), everything works perfectly: my second monitor (a plasma screen connected with HDMI to the second DVI of the ATI card via HDMI/DVI adapter) is fully recognized and it works as an extended desktop or in Mirroring mode.
Under Boot Camp (Windows XP Pro) however, NOTHING: the second monitor always appears in the display properties, but it is grayed out (inactive), and when I try to activate it, it switches back to being grayed out immediately and nothing gets displayed on it.
After reading all the posts I can find on the topic, I tried the following (in pretty much every possible combination - Thank god for WinClone that allows me to restore the Boot Camp basic install image without having to reinstall Windows from scratch every time):
a) Bootcamp 2.0 (installed by default by Bootcamp assistant)
b) Update to Bootcamp 2.1
1) Windows XP Pro SP2c vanilla install (from my Windows XP pro install disk)
2) Update to Windows XP SP3 (I tried with and without BC 2.1: both worked -> BC 2.1 didn't seem to be required for SP3 - maybe because this is a mac pro and not a MB or MBP)
i) ATI drivers installed by default by Boot Camp assistant (BC 2.0) or by BC 2.1
ii) Latest ATI drivers found on ATI web site specifically under Boot Camp / Mac Pro.
Note: Interestingly, the catalyst installer worked ok (provided .NET framework 2.0 is installed though), but it seems that the Radeon BootCamp/Mac Pro driver set itself from ATI's web site does NOT include a driver for the HD 2600 XT - so when I install this driver set, it tells me that no compatible hardware was found...
iii) Latest ATI drivers found under Windows XP (these did include one driver specifically for the Radeon HD 2600 XT)
NOTHING seems to work. I read posts (most of the from late last year) about ATI Catalyst utility showing a 3rd monitor at some point, but I never got any 3rd monitor showing in any of my many many trials with Catalyst. I have yet to get a single image appear on my plasma under Bootcamp Windows. I don't believe its the hardware because everything works great on the max OS X side.
I am actually considering switching to an NVidia 8800 GT just to get the dual screen to work under BootCamp/Windows XP because I really need it and I read everywhere that drivers for NVidia are far better than ATI ones.
Any advice? What should I try next before getting an 8800 ?
Is there a diagnostic utility that I can use to test my config including the GC?
Thanks!

Hi there aside from my laptop I have an iMac 20" with the same HD 2600 XT card. I recently installed the Catalyst 8.6 driver by using a driver mod from driverheaven, I use Vista 32. By installing it this way I got boosted performance and many issues with the bootcamp drivers were fixed. As you may already know the ATI drivers do not install on bootcamped macs usually but the mod tool fixes this. Its unofficial so do so at your own risk but try it out and see if you get the second monitor if not just rollback. Hope this helps and I didn't want to say too much about the 8.6 driver mod because it may not be allowed here but google will provide any answers.

X230T camera does not work under windows 8

Hi!
Is your camera working under Windows 8?
Mine is not. It used to work some time ago, but even then the driver was instable. Now, since a few weeks, it seems not to work at all anymore. Reinstalling the driver does not help.
This may ba a hardware or a software issue, that's why it is important for me to know if yours is working.
Thanks!

As I wrote, I have tried to reinstall the driver without success.
It should be a hardware problem if you are able to run the camera perfectly. Are you using a 64- or 32-bit OS?
Thanks!

Wireless pci card - not working under OS 9

Hello everyone,
I very rarely post on OS 9 sub board, but I have one quick question. First off, my mac is a powerful(to me it is!) 2003 MDD dual 1.25(last before G5) and has 2GB memory with 2GB L3 cache per processor.
Now thats out of the way. I would like to know if the Belkin F5D7000 card(wireless-G 802.11g) supports working under OS 9.2.2? If Belkin does not have a driver for it, is there a generic driver I can install which would allow my wireless card to work under OS 9.2.2? Yes, I have the FW400 based system, however I might consider going with the FW800, but I would like to know really what the big differences are between the FW400 and FW800 machines?
I know the FW800 has ONE FW800 port, has a slot to support AIRPORT EXTREME card(though my machine has a PCI Belkin F5D7000 wireless-G airport extreme card). It also has support for bluetooth which I wouldn't really use anyway since I have no device to make use of bluetooth.
So, my question really is, is there a way to get the wireless card to be recognized under OS 9.2.2 even though Belkin does not have a driver for it? I really would like to use OS 9.2.2 sometimes, but its useless to me if I can't get on the i-net, and regular ethernet is NOT AN OPTION since where I live is only wireless internet.
Ideas? Suggestions?

Hi,
A ethernet to wifi bridge is connected to your computer via the ethernet port.
ex: http://www.macsense.com/product/networking/wua800-1.html
So there is no need for driver in the OS since it's using the ethernet port like connected via a wire. It's the box that convert it to a wifi signal. You could even use this for OS X, Windows or Linux etc...
Many manufacturers make this kind of device.
A+

Driver for HP Laserjet 1012 to work under Windows 7- 64 bit

Am trying to install a HP Laserjet 1012 to work under Windows 7- 64 bit and at HP Support, could find drivers for Vista -64-bit only.
I have tried to install this Vista - 64 bit driver and it does not seem to even print a test page.
Is there some other tweak that I need to make or
or
does it mean there will be no driver specifically usable for Win - 7 and I might as well junk the printer?
Thanks in advance.

Hi
Add Printer
Click Start then select devices and Printer the select Add Printer then select Add a local printer Use an existing port -> Next select the Printer from Manufacturer list and select the Printer from Printer list click Next and follow the Instruction.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

The video out is NOT WORKING under 10.5.2

*APPLE please read this;*
The video out on the MacBook Pro is NOT WORKING under 10.5.2, or precisely is working with a possibility of 10%! Monitors doesn't find signal in, or when they find it, the image is unstable with green shadows.
_I tried 28 external monitor in a store and only ONE was working normally!_ I tried with all the cables combinations (DVI->DVI or DVI->ANALOG, with several different brand cables).
Before the 10.5 update, I didn't have any problem with external Monitor.
The point is that I have installed in the same computer (MAC BOOK PRO) also WINDOWS VISTA, and all the monitors that are not working with MAC OS are working perfectly under VISTA system.
I made a long research online and I found out that thousands of users have the same problem, but no one receive an answer from APPLE from several months!
This is not the only problem that I have under MAC OS 10.5, but them, are other topics.
_Please at least resolve this MAJOR problem that I and thousands of other users have with video out._
Thank you.
Leonardo Corbucci Zanobi
F I R S T A K E - STUDIOS
www.firstake.net

Video out under 10.5.2 works fine for me and for a colleague of mine with a more recent MacBook Pro. I'd wager it's a problem with your Leopard install, not a universal one.
Also, FYI, Apple doesn't read these forums; they're just for user-to-user help. If you want to leave MacBook Pro feedback for Apple, do so here:
http://www.apple.com/feedback/macbookpro.html
But again, I do not believe yours is a universal issue. We'll be happy to help troubleshoot though. What do you mean the image is "unstable"? Could you take a digital photograph of the external monitor's screen and upload it somewhere?

Rocketfish Bluetooth Keyboard RF-BTKB2 not working under Windows 7 64 bit

Rocketfish Bluetooth Keyboard RF-BTKB2 not working under Windows 7 64 bit
Anyone had successs in this or another Bluetooth Keyboard after a bit of a struggle? What did you do to get it working? When I Add Device in Bluetooth it sees the keyboard but enlessly scans for it when I try to select and connect. The Rocketfish Bluetooth mouse worked just fine.

My friend, i have both, the bluetooth mouse and keyboard here that your talking about. and the keyboard was a struggle to pair with the windows 7 64 bit.... i think i spent 2 days working with it. and i didnt try anything special, i just kept trying to pair
it, and unplugging the dongle and working with it... and after a while. it worked... Lately though, i have been looking into getting a wired mouse and keyboard becuase of the delays and sleep time i have with my current keyboard(rocketfish). supposidly there
is a way around the delays but it disables all the options on your keyboard. IE the media buttons, and web browsing features. and my mouse keeps dieing off too....
Also, after researching these products more, i found that alot of people experienced similar problems with them, Being delays and mouse failure. Even with fresh batteries and all. The products werent meant to be used long term(2-3 years) for extensive use...
I dont know about you but i thinki paid 100 bucks for the pair so thats only 25 bucks a year... Which is kinda silly considering i coulda got a better one that wont cough up on me.
If anyone reading this finds a good wireless keyboard that doesnt delay, and a mouth that doesnt delay...(my biggest concern). Please mention it. i am very interested in.

Dreamweaver CS4 not working under MacOS 10.9

on starting DW CS4 it asks for Java Runtime engine 6, but Mavericks has Java v.7 installed. Since Java 6 was part of the OS of previous systems, I cannot install it seperately, besides it would probably cause conflicts with OS 10.9. Do I have to trash my DW, or is there a workaround.
Thanx

If I follow click the instal button on
I get the progress bar for about 1 sec and then the message about a supposed
network problem
which is unreal, since my network works perfectly for any other task and I
had even tried disabling the firewall and little snitch. Things are still
not working
Von: Jon Fritz II <[email protected]>
Antworten an: <[email protected]>
Datum: Montag, 25. November 2013 18:34
An: RoWo <[email protected]>
Betreff: Dreamweaver CS4 not working under
MacOS 10.9
Re: Dreamweaver CS4 not working under MacOS 10.9
created by Jon Fritz II <http://forums.adobe.com/people/JonFritzII> in
Dreamweaver support forum - View the full discussion
<http://forums.adobe.com/message/5872889#5872889>
This has been discussed a lot here, you need to install Java 6.
http://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.ht ml
<http://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html>
Please note that the Adobe Forums do not accept email attachments. If you
want to embed a screen image in your message please visit the thread in the
forum to embed the image at http://forums.adobe.com/message/5872889#5872889
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either reply
to this email or visit the message page:
http://forums.adobe.com/message/5872889#5872889 To unsubscribe from this
thread, please visit the message page at
http://forums.adobe.com/message/5872889#5872889. In the Actions box on the
right, click the Stop Email Notifications link. Start a new discussion in
Dreamweaver support forum at Adobe Community
<http://forums.adobe.com/choose-container!input.jspa?contentType=1&container
Type=14&container=2240> For more information about maintaining your forum
email notifications please go to
http://forums.adobe.com/thread/416458?tstart=0.

This CFHTTP works under CF5 but not CF7

Hi,
Can some one explains to me why this code works under CF5,
the page is returned in fileContent, but under CF7, the fileContent
only contains "connection failure", although the status is reported
as "200 OK".
Also, i'd appreciate if someone could test it under CF8 and
tell mes if the page is returned.
Thanks.

Hi everyone, I’m experiencing a similar prob but find
that your suggested solutions don’t seem to work for me.
On my remoteserever (CF7.02). it returns 408 Request Time-out
no matter what I do. It just never connects. When submitted from my
local server (cf8 developer) I get connected everytime. I have a
friend with the same host (on a different server) and he has no
probs cfttp’ing to this url with the same code.
<cfhttp
url="
http://api.clickatell.com/http/sendmsg"
resolveurl="false"
timeout="5"
method="post"
>
<cfhttpparam type="formfield" name="api_id"
value="9999999">
<cfhttpparam type="formfield" name="user"
value="aaaaaaa">
<cfhttpparam type="formfield" name="password"
value="xxxxxx">
<cfhttpparam type="formfield" name="from"
value="61400000000">
<cfhttpparam type="formfield" name="to"
value="27999100000">
</cfhttp>
I’m not sure if it’s a compression issue or not.
I tried
<cfhttp
url="
http://api.clickatell.com/http/sendmsg"
resolveurl="false"
timeout="5"
method="post"
>
<cfhttpparam type="Header" name="Accept-Encoding"
value="deflate;q=0">
<cfhttpparam type="Header" name="TE"
value="deflate;q=0">
<cfhttpparam type="formfield" name="api_id"
value="9999999">
<cfhttpparam type="formfield" name="user"
value="aaaaaaa">
<cfhttpparam type="formfield" name="password"
value="xxxxxx">
<cfhttpparam type="formfield" name="from"
value="61400000000">
<cfhttpparam type="formfield" name="to"
value="27999100000">
</cfhttp>
AND
<cfhttp
url="
http://api.clickatell.com/http/sendmsg"
resolveurl="false"
timeout="5"
method="post"
>
<cfhttpparam type="header" name="Accept-Encoding"
value="*" />
<cfhttpparam type="Header" name="TE"
value="deflate;q=0">
<cfhttpparam type="formfield" name="api_id"
value="9999999">
<cfhttpparam type="formfield" name="user"
value="aaaaaaa">
<cfhttpparam type="formfield" name="password"
value="xxxxxx">
<cfhttpparam type="formfield" name="from"
value="61400000000">
<cfhttpparam type="formfield" name="to"
value="27999100000">
</cfhttp>
As per
http://www.talkingtree.com/blog/index.cfm/2004/7/28/20040729/
and
your suggestions only to note that none of these suggestions
permitted a successful connection from my remote host. They all
connect immediately from my local host.
I also noted Dan’s quote:
“After some more testing, it appears CFMX 7 reports the
user agent string of "CFSCHEDULE" and not "ColdFusion". This means
you should also add the "CFSCHEDULE" string along with the string
"ColdFusion" to your MIME type exceptions list. “
From:
http://blog.pengoworks.com/index.cfm/2006/3/13/CFHTTP-Connection-Failures-issues-with-Gzip
I’m not sure of the syntax to do this or if the GZIP
stuff is even relevant to my server. (Yep, I’m with Godaddy)
Anyone???

HT201237 Final Cut Pro X 10.0.8 not working under Yosemite

I have Final Cut Pro X 10.0.8 and it stopped working under Yosemite. Are there any fixes or work arounds? Oddly enough, my copy of Final Cut Express 4.01 still works!
MacBook Pro 13" (Late 2011)
12 GB RAM
180 GB Intel 530 SSD

I'm not seeing Final Cut in my purchases on this device ...
However ...
I did change my Apple ID a few times since 2012 (I kept forgetting it and also wanted to consolidate with my other Apple devices ... )
I actually have Final Cut 10.0.8 installed on two computers. I updated Final Cut on the laptop last year to 10.1 .... but KEPT the old FCP version on the desktop because I liked it.
However, since I updated to Yosemite on the desktop last week, Final Cut 10.8 will not open --- and I don't have an "update option" in the App store.
Will this happen on my laptop if I update to Yosemite? That device is running Mountain Lion, I think. But I would hate to also lose Final Cut 10.1 ... it's all I seem to have left.
Do I have to purchase Final Cut again for both computers? Thanks very much for your help, it is very appreciated!

Anyone manage to get ColdFusion to work under Apache on OS X 10.10 Yosemite?

Hi all I'm having great difficulty getting ColdFusion10 to work under Apache with OS X 10.10 Yosemite.
Here is a description of what I've faced and a little of what I've done to solve my problem
Problem 1
Apache httpd.conf file gets messed up
Solution: copy original httpd.conf file from /etc/apache2/original/ to /etc/apache2/
Problem 2
No Java Virtual Machine is installed!
Solution: install Java (version 6 or 7 is better) you may only be able to install version 8
Problem 3
ColdFusion doesn't know where your Java installation is so find and update your ColdFusion configuration files
/Applications/ColdFusion10/cfusion/bin/jvm.config
/Applications/ColdFusion10/cfusion/bin/coldfusion
/Applications/ColdFusion10/cfusion/runtime/bin/wsconfig_jvm.config
change the source to whatever your current Java is and where it's located
for example if you have version 7 installed:
/Library/Java/JavaVirtualMachines/jdk1.7.0_45.jdk/Contents/Home
if you have version 8 installed:
/Library/Java/JavaVirtualMachines/jdk1.8.0_25.jdk/Contents/Home
Problem 4
INFO: The APR based Apache Tomcat Native library which allows optimal performance in production environments was not found on the java.library.path: YOUR PATH HERE!
Solution:Still working on this one!

I think you should try Pacifist http://www.charlessoft.com/
It's a .pkg installer for OS X, I used it several times to install software that Apple's Installer can't install. After installing Xsan 1.0 from your CD, just launch Apple's software update to upgrade to version 1.3. I think it should work (I didn't try it with Xsan, but this procedure works with other software).
Khafaga

Lexmark Optra S 1250 - Working under Leopard

I wanted to let people know that the Lexmark Optra S 1250 printer can work under leopard (10.5.1). It was quite a (stressful) experience getting it working but here were the essential steps:
1. After installing 10.5.1, reinstall the latest Optra S printer driver.
2. Ensure the printer is connected and powered on - mine is connected using a USB to Parallel converter cable but could also use an Ethernet cable
3. In the 'Printer & Fax Preference pane click the "+" to add a new printer.
4. Let the search for the printer driver complete(by gosh it is extremely slow!)
5. Click "Add" and when the drop-down box starts looking for 'printer options', don't wait (it never completes) but click the "Configure" button. Select your options and then exit.
6. Hopefully the printer now shows up as added on the left side of the Preference pane.
7. Close and then Restart the computer. I couldn't get the printer to respond to print commands (drove me crazy!) until after I decided to shut down and restart the computer.
8. If you still have problems, you may need to go back to the Printer & Fax Preference Pane, control-click on the printer icon in the left side of the pane and select "Reset print system". After that, redo steps 1 to 7.
Good luck
Rudy

Explain #8.
Did you restart after adding the drivers?
If you open the System Profiler, under Firewire or Printers what do yo see?
(Apple Menu/About this Mac/More Info/Firewire or Printer)
If it sees them then you know it's a configuration problem.

LiveCycle ES 8,2 JBoss : will it work under Windows PC 2007

LiveCycle ES 8,2 JBoss : will it work under Windows PC 2007 virtual machine? (Turnkey or non turnkey version)
Thanks
Yog

great - another few hundred pounds I'll have to spend..... thanks adobe... more profit for you... but here is another question what about cs4? is that compatible with windows 8 as I have a web standard version, what ever that means but I dont have photoshop for CS4 as I got it for the web desing ...and there no chance of using your cloud thingy 'cos I aint spending $50 a month !!!!
can anyone suggest what I should do - I have my original Photoshop 6, then I purchased CS2, following that I got CS4 Web standard as I was doing a Dreamweaver course and the CS4 came as part of the course but with no photoshop. Now I use adobe bridge and photoshop extensively, these are the 2 I realy want and with Cs2 it worked great as it upgraded Photo 6 to cs2 and I got Bridge NOW I GOT NOTHING !!!! how frustrating

Is Comfort trade LTD is working under your company?

Similar Messages

Maybe you are looking for