Is connect the best lms for captivte?

My company is going to be using adobe captivate for its online training for our distributors. Is adobe connect the best when to monitor scores and tests for that? What is the cost on this as well?

That question is more difficult to answer than it may seem. Connect does a great job of tracking and monitoring scores with Captivate content, but it shouldn't be called an LMS... Maybe LMS light is a better term.
Captivate should report well to any LMS though, so the better question is do you need an LMS, and how big is your budget for an LMS? I won't get into pricing here, as that is not a forum appropriate conversation, and you shouldn't say your budge here .
I'll contact you off forum and we can discuss how Connect may or may not fit into your plans for Captivate.

Similar Messages

What's the best approach for handeling about 1300 connections in Oracle.

What's the best approach for handling about 1300 connections in Oracle 9i/10g through a Java application?
1.Using separate schema s for various type users(We can store only relevant data with a particular schema. Then No. of records per table can be reduced by replicating tables but we have to maintain all data with a another schema Then we need update two schema s for a given session.Because we maintain separate scheama for a one user and another schema for all data and then there may be Updating problems)
OR
2. Using single schema for all users.
Note: All users may access the same tables and there may be lot of records than previous case.
What is the Best case.
Please give Your valuable ideas

It is a true but i want a solution from you all.I want you to tell me how to fix my friends car.

What is the best router for mugs connectivity

i am looking for best networking institute in India, for optical networking please suggest, have heard about Networkers Zone (http://networkerszone.com/) , however needs suggestion and what is the best router for mugs connectivity.

For training on the Cisco Optical I would rrecommend Fastlane http://www.fastlane.si/ they would be able to fullfill your training requirements either in India or at another location even at the Cisco Factory in Monza, they can tailor courses to your specific requirements and also do switching and routing courses too, I have know one of the instructors for over 10 years they are very good.
As far as recommending the best router, that all depends on the application, not what you mean by mugs connectivity, I know what mugs is in English but not sure if thats what you mean or if it is an acronym for something else in any case if you post in the router section of Net-Pro with your specific requirements I'm sure someone woule be able to help/advise accordingly.

What is the best antivirus for MacBook Pro?

What is the best antivirus for MacBook Pro?

1. This comment applies to malicious software ("malware") that's installed unwittingly by the victim of a network attack. It does not apply to software, such as keystroke loggers, that may be installed deliberately by an intruder who has hands-on access to the victim's computer. That threat is in a different category, and there's no easy way to defend against it. If you have reason to suspect that you're the target of such an attack, you need expert help.
If you find this comment too long or too technical, read only sections 5, 6, and 10.
OS X now implements three layers of built-in protection specifically against malware, not counting runtime protections such as execute disable, sandboxing, system library randomization, and address space layout randomization that may also guard against other kinds of exploits.
2. All versions of OS X since 10.6.7 have been able to detect known Mac malware in downloaded files, and to block insecure web plugins. This feature is transparent to the user, but internally Apple calls it "XProtect." The malware recognition database is automatically checked for updates once a day; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders.
The following caveats apply to XProtect:
It can be bypassed by some third-party networking software, such as BitTorrent clients and Java applets.
It only applies to software downloaded from the network. Software installed from a CD or other media is not checked.
3. Starting with OS X 10.7.5, there has been a second layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications and Installer packages downloaded from the network will only run if they're digitally signed by a developer with a certificate issued by Apple. Software certified in this way hasn't necessarily been tested by Apple, but you can be reasonably sure that it hasn't been modified by anyone other than the developer. His identity is known to Apple, so he could be held legally responsible if he distributed malware. That may not mean much if the developer lives in a country with a weak legal system (see below.)
Gatekeeper doesn't depend on a database of known malware. It has, however, the same limitations as XProtect, and in addition the following:
It can easily be disabled or overridden by the user.
A malware attacker could get control of a code-signing certificate under false pretenses, or could simply ignore the consequences of distributing codesigned malware.
An App Store developer could find a way to bypass Apple's oversight, or the oversight could fail due to human error.
For the reasons given above, App Store products, and other applications recognized by Gatekeeper as signed, are safer than others, but they can't be considered absolutely safe. "Sandboxed" applications may prompt for access to private data, such as your contacts, or for access to the network. Think before granting that access. OS X security is based on user input. Never click through any request for authorization without thinking.
4. Starting with OS X 10.8.3, a third layer of protection has been added: a "Malware Removal Tool" (MRT). MRT runs automatically in the background when you update the OS. It checks for, and removes, malware that may have evaded the other protections via a Java exploit (see below.) MRT also runs when you install or update the Apple-supplied Java runtime (but not the Oracle runtime.) Like XProtect, MRT is presumably effective against known attacks, but maybe not against unknown attacks. It notifies you if it finds malware, but otherwise there's no user interface to MRT.
5. XProtect, Gatekeeper, and MRT reduce the risk of malware attack, but they're not absolute protection. The first and best line of defense is always your own intelligence. With the possible exception of Java exploits, all known malware circulating on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of so-called "trojan horses," which can only have an effect if the victim is duped into running them. The threat therefore amounts to a battle of wits between you and the malware attacker. If you're smarter than he thinks you are, you'll win.
That means, in practice, that you never use software that comes from an untrustworthy source, or that does something inherently untrustworthy. How do you know what is trustworthy?
Any website that prompts you to install a “codec,” “plug-in,” "player," "extractor," or “certificate” that comes from that same site, or an unknown one, is untrustworthy.
A web operator who tells you that you have a “virus,” or that anything else is wrong with your computer, or that you have won a prize in a contest you never entered, is trying to commit a crime with you as the victim. (Some reputable websites did legitimately warn visitors who were infected with the "DNSChanger" malware. That exception to this rule no longer applies.)
Pirated copies or "cracks" of commercial software, no matter where they come from, are unsafe.
Software of any kind downloaded from a BitTorrent or from a Usenet binary newsgroup is unsafe.
Software that purports to help you do something that's illegal or that infringes copyright, such as saving streamed audio or video for reuse without permission, is unsafe. All YouTube "downloaders" are in this category, though not all are necessarily harmful.
Software with a corporate brand, such as Adobe Flash Player, must be downloaded directly from the developer’s website. If it comes from any other source, it's unsafe.
Even signed applications, no matter what the source, should not be trusted if they do something unexpected, such as asking for permission to access your contacts, your location, or the Internet for no obvious reason.
6. Java on the Web (not to be confused with JavaScript, to which it's not related, despite the similarity of the names) is a weak point in the security of any system. Java is, among other things, a platform for running complex applications in a web page, on the client. That was always a bad idea, and Java's developers have proven themselves incapable of implementing it without also creating a portal for malware to enter. Past Java exploits are the closest thing there has ever been to a Windows-style virus affecting OS X. Merely loading a page with malicious Java content could be harmful.
Fortunately, client-side Java on the Web is obsolete and mostly extinct. Only a few outmoded sites still use it. Try to hasten the process of extinction by avoiding those sites, if you have a choice. Forget about playing games or other non-essential uses of Java.
Java is not included in OS X 10.7 and later. Discrete Java installers are distributed by Apple and by Oracle (the developer of Java.) Don't use either one unless you need it. Most people don't. If Java is installed, disable it — not JavaScript — in your browsers.
Regardless of version, experience has shown that Java on the Web can't be trusted. If you must use a Java applet for a task on a specific site, enable Java only for that site in Safari. Never enable Java for a public website that carries third-party advertising. Use it only on well-known, login-protected, secure websites without ads. In Safari 6 or later, you'll see a lock icon in the address bar with the abbreviation "https" when visiting a secure site.
Follow the above guidelines, and you’ll be as safe from malware as you can practically be. The rest of this comment concerns what you should not do to protect yourself from malware.
7. Never install any commercial "anti-virus" or "Internet security" products for the Mac, as they all do more harm than good, if they do any good at all. Any database of known threats is always going to be out of date. Most of the danger is from unknown threats. If you need to be able to detect Windows malware in your files, use one of the free anti-virus products in the Mac App Store — nothing else.
Why shouldn't you use commercial "anti-virus" products?
Their design is predicated on the nonexistent threat that malware may be injected at any time, anywhere in the file system. Malware is downloaded from the network; it doesn't materialize from nowhere.
In order to meet that nonexistent threat, the software modifies or duplicates low-level functions of the operating system, which is a waste of resources and a common cause of instability, bugs, and poor performance.
By modifying the operating system, the software itself may create weaknesses that could be exploited by malware attackers.
8. An anti-malware product from the App Store, such as "ClamXav," doesn't have these drawbacks. That doesn't mean it's entirely safe. It may report email messages that have "phishing" links in the body, or Windows malware in attachments, as infected files, and offer to delete or move them. Doing so will corrupt the Mail database. The messages should be deleted from within the Mail application.
An anti-virus app is not needed, and should not be relied upon, for protection against OS X malware. It's useful only for detecting Windows malware. Windows malware can't harm you directly (unless, of course, you use Windows.) Just don't pass it on to anyone else.
A Windows malware attachment in email is usually easy to recognize. The file name will often be targeted at people who aren't very bright; for example:
♥♥♥♥♥♥♥♥♥♥♥♥♥♥!!!!!!!H0TBABEZ4U!!!!!!!.AVI♥♥♥♥♥♥♥♥♥♥♥♥♥♥.exe
Anti-virus software may be able to tell you which particular virus or trojan it is, but do you care? In practice, there's seldom a reason to use the software unless a network administrator requires you to do it.
The ClamXav developer won't try to "upsell" you to a paid version of the product. Other developers may do that. Don't be upsold. For one thing, you should not pay to protect Windows users from the consequences of their choice of computing platform. For another, a paid upgrade from a free app will probably have the disadvantages mentioned in section 7.
9. It seems to be a common belief that the built-in Application Firewall acts as a barrier to infection, or prevents malware from functioning. It does neither. It blocks inbound connections to certain network services you're running, such as file sharing. It's disabled by default and you should leave it that way if you're behind a router on a private home or office network. Activate it only when you're on an untrusted network, for instance a public Wi-Fi hotspot, where you don't want to provide services. Disable any services you don't use in the Sharing preference pane. All are disabled by default.
10. As a Mac user you don't have to live in fear that your computer is going to be infected every time you install an application, read email, or visit a web page. But neither should you have the false idea that you will always be safe, no matter what you do. The greatest harm done by security software is precisely its selling point: it makes people feel safe. They may then feel safe enough to take risks from which the software doesn't protect them. Nothing can lessen the need for safe computing practices.

What are the best approaches for mapping re-start in OWB?

What are the best approaches for mapping re-start in OWB?
We are using OWB repository 10.2.0.1.0 and OWB client 10.2.0.1.31. The Oracle version is 10 G (10.2.0.3.0). OWB is installed on Linux.
We have number of mappings. We built process flows for mappings as well.
I like to know, what are the best approches to incorportate re-start options in our process. ie a failure of mapping in process flow.
How do we re-cycle failed rows?
Are there any builtin features/best approaches in OWB to implement the above?
Does runtime audit tables help us to build re-start process?
If not, do we need to maintain our own tables (custom) to maintain such data?
How did our forum members handled above situations?
Any idea ?
Thanks in advance.
RI

Hi RI,
How many mappings (range) do you have in a process flows?Several hundreds (100-300 mappings).
If we have three mappings (eg m1, m2, m3) in process flow. What will happen if m2 fails?Suppose mappings connected sequentially (m1 -> m2 -> m3). When m2 fails then processflow is suspended (transition to m3 will not be performed). You should obviate cause of error (modify mapping and redeploy, correct data, etc) and then repeat m2 mapping execution from Workflow monitor - open diagram with processflow, select mapping m2 and click button Expedite, choose option Repeat.
In re-start, will it run m1 again and m2 son on, or will it re-start at row1 of m2?You can specify restart point. "at row1 of m2" - I don't understand what you mean (all mappings run in Set based mode, so in case of error all table updates will rollback,
but there are several exception - for example multiple target tables in mapping without corelated commit, or error in post-mapping - you must carefully analyze results of error).
What will happen if m3 fails?Process is suspended and you can restart execution from m3.
By having without failover and with max.number of errors=0, you achieve re-cycle failed rows to zero (0).This settings guarantee existence only two return result of mapping - SUCCSES or ERROR.
What is the impact, if we have large volume of data?In my opinion for large volume Set based mode is the prefered processing mode of data processing.
With this mode you have full range enterprise features of Oracle database - parallel query, parallel DML, nologging, etc.
Oleg

What is the best practice for creating primary key on fact table?

what is the best practice for primary key on fact table?
1. Using composite key
2. Create a surrogate key
3. No primary key
In document, i can only find "From a modeling standpoint, the primary key of the fact table is usually a composite key that is made up of all of its foreign keys."
http://download.oracle.com/docs/cd/E11882_01/server.112/e16579/logical.htm#i1006423
I also found a relevant thread states that primary key on fact table is necessary.
Primary Key on Fact Table.
But, if no business requires the uniqueness of the records and there is no materilized view, do we still need primary key? is there any other bad affect if there is no primary key on fact table? and any benifits from not creating primary key?

Well, natural combination of dimensions connected to the fact would be a natural primary key and it would be composite.
Having an artificial PK might simplify things a bit.
Having no PK leads to a major mess. Fact should represent a business transaction, or some general event. If you're loading data you want to be able to identify the records that are processed. Also without PK if you forget to make an unique key the access to this fact table will be slow. Plus, having no PK will mean that if you want to used different tools, like Data Modeller in Jbuilder or OWB insert / update functionality it won't function, since there's no PK. Defining a PK for every table is a good practice. Not defining PK is asking for a load of problems, from performance to functionality and data quality.
Edited by: Cortanamo on 16.12.2010 07:12

HT4914 I purchased iMatch because my old computer was failing and I was afraid of losing my music library. Now I bought a new laptop; what is the best way for me to transfer my library to my new laptop? Will iMatch help me do this?

I purchased iMatch because my old computer was failing and I was afraid of losing my music library. Now I bought a new laptop; what is the best way for me to transfer my library to my new laptop? Will iMatch help me do this?

Is/was failing or has failed?
If the old computer still runs one of these methods may be best.
Method 1
Backup the library with this User Tip.
Restore the backup to your new computer using the same tool used to back it up.
Deauthorize the old computer if you no longer want to access protected content on it.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
I'd recommend method 1 since it establishes an ongoing backup for your library.
I don't have personal experience with iTunes Match, but in principle you should be able to download all the tracks currently registered to your iTunes Match account. This isn't quite the same as restoring your previous library exactly as it was. There is always the potential for iTunes match to provide the wrong version of a song and could be content such as movies, podcasts, audiobooks etc. that would have been excluded.
tt2

Which is the best iOS for iPhone 3G? I am currently on 3.1.3 !

Which is the best iOS for iPhone 3G?
Should i update it to the latest 4.2.1 or let it be on my current firmware 3.1.3?
I have heard that 3G is best on 3.1.3?
Comment?

If I may, I agree that version 3.1.3 is the best for the iPhone 3G, however, I am currently travelling in Europe and I have a SIM card from a local mobile company. I discovered the hard way that there is an option missing: Settings > General > Network > Cellular Data (on/off). This option is not present in iOS 3.1.3. So basically, you disable 3G but it is impossible to block EDGE, and your phone will automatically revert to it if 3G is not available, and you will occur cellular data fees anyway.
I am sure of what I am saying because with the local service I use, I have unlimited data for $4 per day, but it is debited as soon as I consume one byte of data, then it is free until midnight the same day. Event if I have set Enable 3G = off, Data Roaming = off, for two days in a row, I was still charged the $4 a day because the Cellular Data was not off!
I compared with my wife's iPhone 3GS with iOS 5.1, there is the three options, Enable 3G (on/off), Data Roaming (on/off), Cellular Data (on/off). The option to turn it off simply doesn't exists on iOS 3.1.3!
With some research, I found that it is possible to block it anyway if you change your APN (Access Point Name) to an invalid setting. The easiest way to do this is to connect to the Internet using WiFi, then access this web site with Safari: http://unlockit.co.nz/ (from your iPhone).
This online tool allows you to change your APN, it is very useful when you travel abroad and you use local SIMs. On the first screen press Continue, on the second screen press Custom APN to create an APN for a local mobile company, or press Disable Data (FakeAPN) to disable 3G and Edge for good. When creating a Custom APN, you will be asked to choose a Country and a Provider, then press Create Profile. Then, either way, press Install and "Install Now" or "Replace", then press Done. This will add two things to your phone: first, an app-like icon for quick access to the website http://unlockit.co.nz/, second, a new menu in Settings > General, labelled "Profile", that contains your new APN. Note that it is possible to add several profile information, and some may conflict with each other. Remove those you don't need. Don't remove them if you are not sure!
I hope this works for you!

Is WebI the best tool for Excel file reporting?

For many years we use BO/DeskI to produce reports. The data source was DB2.
From time to time, the users find the production so user friendly the begin to use DeskI for reports with Excel files for input.
They create hundreads of reports with the 'Rich client' service.
Now we are upgrading to WebI and the Rich Client will be on the server. The BO Service server is a small machine, because of the licences we have.
We have bigs questions :
is WebI/Rich Client still a good solution for Reporting for external file like Excel?
Is this solution will create a ressource problem on the server when more then 100 peoples will connect and use the service?
Should we limite the external file for the rich client location on the server (we do not want to install any more software on client computers like with DeskI)?
Is a product like Crystal Report a better solution for office reporting (file like Excel, Access, text file, etc)?
In one word, is WebI the best solution for office reporting or we should go for a product like Crystal (server, ressources and licence limitation)?
Thanks

You should not compare Crystal Reports with Web Intelligence. If you were using DeskI then you should go with WebI because that means you are using ad-hoc reporting. WebI is the new DeskI. Crystal Reports is used for other purposes not for Ad-hoc reporting. You use Crystal for pixel perfect reports not for analysis.
For excel data sources, are you going to use Excel with universe design or directly in WebI?
If you are going to use it with Universe, then you will have some connection limitations. If more than one user tries to refresh the report based on excel universe, you will get an error.
On the other hand, if you will use the excel directly in WebI, you cannot refresh the report on InfoView (BIlaunch pad).
As you mentioned with not installing client tools then your choice will be the first one excel universes.
Hope this helps.

Whats the best router for multiple Wireless-G

I just want to know whats the best router for running multiple wireless-G with some things wired and some wireless also sharing on the network and gaming with a good internet connection whats the best router ?
Good Speeds
Good Range
Multiple online sharing
Online Gaming
I think everything is wireless-g
Things i have on the router
Linksys Nas200 - wired
Laptop - wireless
Desktop - wired
2 Xbox 360's - 1 wired and 1 wireless
2 Sony PSP's - both wireless
Soon a wireless printer or a linksys printer server
Message Edited by Sas101 on 11-12-2007 07:30 PM

As you posted it sems that you need good router for wireless connectivity .....
You can go for any N router lile WRT300N.... WRT350N ..... WRT150N ....
They will give you excellent performance for the connection you require.....

Is the 'Undercover' app the best app for the job ?

Hi,
Is the 'Undercover' app the best app for help finding a lost iPhone/Touch or is there an app that does a better job ?
Thanks

Short of getting MobileMe that is probably the best you are going to come up with. You will have to hope that whoever finds the iPhone actually plays the game and that you check for this information close to the time they do so. You also need to hope they don't connect the iPhone to their computer which will wipe the app from the device.

Whats is the Best platform for CiscoWorks installation.

Hello,
Please advise whats the best platform for CiscoWorks installation. We are currently using the windows 2003 32-bit and CiscoWorks is slow.
We are currently using the LMS 3.2, RME 4.3.0, CM 5.2.1
THANKS

We are using 2008 R2 for LMS 4.0.1 - runs great - need loads of RAM and page file but we have not had many challenges. Java seems to run away with memory at times and we cycle out the services but it runs great.

What is the best method for storing/retrieving images?

Friends,
OS: RHEL AS 3
DB: 9iR2
We have some critical situation. We need to scan all our Purchase orders and to store in our pc. we don't want to store the images in the database. it will be a big headache. We have 4 branches in different cities. All the branches are connected to our local network. We have novell server in every branches to store the oracle forms and the db is centralized in our head office. The purpose is to view any PO in any branch.
so,what will be the best solution for storing the images for our archiving?
thanks & regards

Yes - a good quality external hard drive is the answer
Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
LN

Which is the best alignment for a Date-time data type (WPF)

Hello,
sorry If I'm asking this question in the wrong place (If you could help me where to ask it :) )
I have read the Microsoft guidelines for Layout. Left and right alignment are briefly described... but I don't see anything for Date/Time data type? What is the best alignment for this type of data?
Can you tell me where I can find the relevant information? Microsoft guidelines or other?
We are using WPF.
Thank you very much :)

Welcome to the discussion area!
+1) Will using the TC on a wireless network as a repeater half my connection speed while doubling my coverage?? In that case it might be worth it..+
Unfortunately, the Time Capsule will only "extend" a wireless network if the network has been created by another Apple "n" router. So the Netgear would not be compatible with the Time Capsule for this purpose.
If you could connect the Netgear and Time Capsule together using an ethernet cable, you would be able to create one large wireless network.
+2) Do I have any reason to believe I could get better coverage using the TC as the Base Station and trying to virtually impossible task of setting up the Netgear as a bridge?+
Not sure about "better coverage", but the Time Capsule would create dual band networks operating at both 5 GHz and 2.4 GHz so faster devices could connect at 5 GHz for maximum speed and slower devices would connect to the 2.4 GHz band.
In addition, if the Time Capsule connects directly to your cable modem, you could enable the "guest" network feature if you needed that function. (However, if the Time Capsule is configured in the network as a "bridge", the guest network feature cannot be enabled).
On a quick glance, your Netgear router does not appear to be a simultaneous dual band device. If that's the case, you could configure it to expand either the 2.4 GHz band or 5 GHz band (assuming it will handle 5 GHz) for wider wireless coverage. But, the connection between devices would need to be via ethernet cable, and as you point out, the Netgear would need to configured as a "bridge" in this type of setup.
If running the ethernet cable is simply not possible, take a look at a pair of ethernet powerline adapters to accomplish the same task using the AC wiring in your home to transmit the ethernet signal. While not as good as a straight ethernet cable, this type of connection would still yield better performance than wireless only, if the devices were compatible.

What is the best encoder for a quicktime movie into iDVD...?

i seem to be having some issues with picture quality once the DVD is actually made... i do have my preferences set at professional quality, but i think my problem may be with the original source file... what's the best format for that...? H264...? mpeg4...? pro res...?
thanks

Since you are just researching, I am going to make this as short and sweet as possible.
The 27 inch screen IMac is your only option. You need to have one with the fastest i7 CPU, fastest Graphics processor. Order one with the base 8 GBs of RAM and add additonal RAM through cheaper third party Mac RAM suppliers.
My preference is for the standard ATA 7200 rpm drives as the Fusion-type drives are not proven technology, yet.
If you want a really fast iMac and can afford it, consider an internal or external solid state drive (SSD) as these drives ard very,very fast.
For external drives fast drives are ones that use USB 3, Thunderbolt and/or FireWire 800 connections.
Stay away from external USB 2.0 external hard drives. They aren't fast enough.
You need an adapter adapter for your mini DV camera.
You are going to need some make of separate high speed audio interface box for instruments and vocals.
Look at interface boxes from M-Audio.
And you'll need to budget for a third party, good quality, high speed external FireWire 400/800 CD/DVD optical drive.
Plus, very seriously consider the purchase of extended 3-year AppleCare Warranty plan.
Something will go wrong with an iMac between 1-5 years.
Three years of warranty protection offers free repairs and replacement of you have hardware failures.
Good Hunting!

Is connect the best lms for captivte?

Similar Messages

Maybe you are looking for