Is EO necessary for the Item Style「MessageFileUpload」on EBS 12.1.3?

Hello experts,
When using Item Style「MessageFileUpload」,if the file which is being uploaded
exists ,the file name with an anchor will be rended and the file can be previewed
by click it.But the customer found that EO should be added for the VO associated with
Item Style「OAMessageFileUpload」.If EO is removed,the file will be opened as a blank file.
So is EO necessary for Item Style「MessageFileUpload」?
Thank you in advance.
Best regards,
Wang
Edited by: user593662 on May 16, 2012 1:06 AM

Hi,
You need to save the file and for that you need the EO.
Thanks
Anoop

Similar Messages

The workflow could not update the item, possibly because one or more columns for the item require a different type of information. Outcome: Unknown Error

Received this error (The workflow could not update the item, possibly because one or more columns for the item require a different type of information.) recently on a workflow that was
working fine and no changes were made to the workflow.
I have tried a few suggestions, i.e. adding a pause before any ‘Update’ action (which didn’t help because the workflow past this action without incident); checked the data type being written
to the fields (the correct data types are being written); and we even checked the list schema to ensure the list names and the internal names are aligned (they
are), but we still cannot figure out why the workflow is still throwing this error.
We located the area within the workflow step where it is failing and we inserted a logging action to determine if the workflow would execute the logging action but it did not, but wrote the same error message.
The workflow is a Reusable Approval workflow designed in SharePoint Designer 2010 and attached to a content type.
The form associated with the list was modified in InfoPath 2010.
Approvers would provide their approval in the InfoPath form which is then read by the workflow.
Side note - items created after the workflow throws this Unknown Error some seem to be working fine.
We have deleted the item in question and re-added it with no effect.
Based on what we were able to determine there don’t seem to be any consistency with how this issue is behaving.
Any suggestions on how to further investigate this issue in order to find the root cause would be greatly appreciated?
Cheers

Hi,
I understand that the reusable workflow doesn’t work properly now. Have you tried to remove the Update list item action to see whether the workflow can run without issue?
If the workflow runs perfectly when the Update list item action is removed, then you need to check whether there are errors in the update action. Check whether the values have been changed.
Thanks,
Entan Ming
Entan Ming
TechNet Community Support

The workflow could not update the item, possibly because one or more columns for the item require a different type of information using Update Item action

I got error "The workflow could not update the item, possibly because one or more columns for the item require a different type of information "I found out the cause is Update Item action
I need to update item in another List call Customer Report ,the field call "Issues" with data type "Choice" to yes
then the error arise . please help..

Thanks for the quick response Nikhil.
Our SPF 2010 server is relatively small to many setups I am sure. The list with the issue only has 4456 items and there are a few associated lists, eg lookups, Tasks, etc see below for count.
Site Lists
Engagements = 4456 (Errors on this list, primary list for activity)
Tasks = 7711 (All workflow tasks from all site lists)
Clients = 4396 (Lookup from Engagements, Tslips, etc)
Workflow History = 584930 (I periodically run a cleanup on this and try to keep it under 400k)
Tslips = 3522 (Engagements list can create items here, but overall not much interaction between lists)
A few other lists that are used by workflows to lookup associations that are fairly static and under 50 items, eg "Parters Admin" used to lookup a partners executive admin to assign a task.
Stunpals - Disclaimer: This posting is provided "AS IS" with no warranties.

Excel, PowerView error in SharePoint 2013: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source."

I've installed SQL Server 2012 SP1 + SP server 2012 + SSRS and PowerPivot add-in.
I also configured excel services correctly. Everything works fine but the powerview doesn't work!
While I open an excel workbook consist of a PowerView report an error occurs: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions
to access the data source."
error detail:
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="http://www.microsoft.com/sql/reportingservices">An
error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3128.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the
data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source></Source><Message>For more information about this error navigate
to the report server on the local server machine, or enable remote errors</Message></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
Please help me to solve this issue. I don't know if uploading the excel workbook is enough or maybe It needed to connect to another data source.
I Appreciate in advance.

Hi Ali.y,
Based on the current error message, the error can be related to the
Claims to Windows Token Service (C2WTS) and is an expected error under certain conditions. To verify the issue, please check the aspects below:
     1. The C2WTS Windows service and C2WTS SharePoint service are both running.
     2. Check the SQL Server Browser service is running on the machine that has the PowerPivot instance of SSAS.
     3. Check the domain. You're signing into SharePoint with a user account in some domain (call it Domain A). When Domain A is equal to Domain B which SharePoint server itself is located (they're the same domain), or Domain
A trusts Domain B.
In addition, the error may be caused by Kerberos authentication issue due to missing SPN. In order to make the Kerberos authentication work, you need to configure the Analysis Services to run under a domain account, and register the SPNs for the Analysis
Services server.
To create the SPN for the Analysis Services server that is running under a domain account, run the following commands at a command prompt:
• Setspn.exe -S MSOLAPSvc.3/Fully_Qualified_domainName OLAP_Service_Startup_Account
Note: Fully_Qualified_domainName is a placeholder for the FQDN.
• Setspn.exe -S MSOLAPSvc.3/serverHostName OLAP_Service_Startup_Account
For more information, please see:
How to configure SQL Reporting Services 2012 in SharePoint Server 2010 / 2013 for Kerberos authentication
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

An error occurred while loading the model for the item or data source 'EntityDataSource'.

Hi Team,
We are trying to configure the Power View in SharePoint 2013. We did the entire configuration by following below steps. When we open the excel workbook (2013) containing
Power View sheet (using excel web services) deployed in SharePoint Document library, we get the below error.
“An error occurred while loading the model for the item or data source
'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.”
Steps followed for configuring Power View in SharePoint Server 2013 (Single Machine setup):
Installed SharePoint Server 2013 Enterprise edition
Did not configure it at this time
Installed SQL Server 2012 with default instance installation (selected every features)
Later installed SP1 for SQL Server 2012
After that installed Analysis Server in SharePoint mode (SQL Server PowerPivot for SharePoint)
Again installed another Analysis Server and selected the tabular mode of data model
Then ran the configuration wizard of Share point 2013 for farm configuration (only for central admin creation)
Later we ran the PowerPivot for SharePoint 2013 (spPowerpivot.msi)
Then using the Power Pivot Configuration tool for 2013 and completed all the steps and configured the excel service and registered the above two analysis service instances.
Questions/Doubts are:
Is our steps followed as mentioned above is correct for configuring Power View in SharePoint Server 2013 Enterprise edition?
Is the SQL Server 2012 Enterprise edition with SP1 installed is sufficient to view Power View sheets in SharePoint 2013 or we need to use the SQL Server 2012 SP1
CTP3 software for Power View feature as mentioned in the below link.
http://technet.microsoft.com/en-us/library/jj219634.aspx
but we don’t have an option to download CTP3 software now from Microsoft site
Or do we need to install
Microsoft SQL Server 2012 With Power View For Multidimensional Models
CTP
http://www.microsoft.com/en-sg/download/details.aspx?id=35822
Few blogs says that SQL Server 2012 instance should have been installed with SP1 at one go (not seperately).
http://www.microsoft.com/en-in/download/details.aspx?id=35575
Error detail :
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message
xmlns="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access
the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3000.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access
the data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source>Microsoft.AnalysisServices.SPClient</Source><Message>We
cannot locate a server to load the workbook Data Model.</Message><MoreInformation><Source></Source><Message>We cannot locate a server to load the workbook Data Model.</Message><MoreInformation><Source>Microsoft.Office.Excel.Server.WebServices</Source><Message>We
cannot locate a server to load the workbook Data Model.</Message></MoreInformation></MoreInformation></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices"
/></detail>
Please help me in configuring Power View for SharePoint 2013.
Thanks in advance.
Pavan Kumar

I'll bet that I know the answer to this one - and you probably won't like it ;)
Here's the telling portion of that error: "We cannot locate a server to load the workbook Data Model."
This error is thrown in two scenarios; the first, when you haven't registered an analysis server. The second appears to be the issue you're having:
PowerPivot requires SQL Server 2012 SP1. Microsoft issued a release of SQL Server 2012 SP1 that really wasn't SP1...
Check the version of SQL that you are running. It should be version 11.0.3000 or greater. If it's not, you have the wrong "SP1" installed. The correct one is
here.
Here's the bad news- you can't simply redeploy the correct one... because the installer already thinks that SP1 is installed. You'll have to backup (or detach and copy) your databases, then re-install SQL with the correct SP1, then restore or reattach
the databases. Once you've done that, PowerPivot and PowerView will work properly.
I sincerely hope this resolves your issues - we wasted TWO WEEKS of our time with this problem!

Cross Company Stock Transfer- Please check excise base for the item is zero

Hi,
My scenario is Cross company Stock transfer (Two different Company Codes)
I have done following steps :
1.Create Purchase Order
2.Create Outbound Delivery for Purchase Order
3.Post Goods Issue for Delivery
4.Creating Billing Document
5.Creating Excise Invoice
6.Printing of Excise Invoice
7.Post Goods Receipt for Stock Transport Order
Till MIGO there is no problem.
I am getting a errro while doing MIGO with reference to Outbound Delivery, when I enter Excise Invoice created in sending plant, I am getting error as
"Please check excise base for the item is zero" - Message no. 4F121
Excise Duty values are flowing as per the excise invoice but system make base value as 0 , I have maintained Assesable value in J1ID also. We are using TAXINN.
Pl. help
Thanks
Vikas

Hi
The best way to slolve this problem, Now is to maintain Assable value in Material Master For reciving Plant.
Hear you can maintain all the chapter id, register A or C, etc
and then try doing GR,
The other way and the permanent solution is
VPRS or equivalent
Condition class B Prices
Calculat.type C Quantity
Condit.category H
Cond.control H Condition value fixed
Condit.origin A Automatic pricing
In this Condition category is most important and by this only system copies the base amount for excise duty calculation in MIGO or J1IEX.
Regs
Niti Narayan

Re:Error while updating Warehouse List for the items in DTW..!!!

Dear SAP Members,
We have transferred the items through DTW but while updating the warehouse list for the items.i got a error message like this:
No. Status Key Reason
1 Updatefailed ItemCode cannot find this object in B1-application defined or object defined error65171
How to resolve this issue.It shows error for 600 records.It is very dfficult to enter manually.Help me on this issue.
With Regards,
Revathy

Hi Revathy,
I suggest you use SQL Server Management Studio. I am not sure which DTW template you are using. All templatesl map to certain tables in B1. You should perfform a select on that table in SQL Management Studio.
It seems like the column that connects DTW Template in excel to the column in B1 Table do not match. Usually you may have incremental numbers in starting sequence in DTW Template, however, it is different in B1. You may need to copy the numbers over to DTW Template.
If you want to do it automatically, you can achieve it through mapping or you could write your own little program that takes data from B1 tables and replace the one in Excel in that column.
If it is one time effort you may just map them manually.
I hope I am making sense to you.
If you want us to try it out, give the name of the template, the content in the template may be few lines.

Make goods receipt for the items w/difference after the proof of delivery

Hello experts,
I do like to know how finish the process of proof of delivery, when I does have items with differences over the quantities that arrived to my client. For example, one sales order for 20 units. I did the delivery note, and posted the goods issue. Then I did the Proof of Delivery, confirming 19 units and the deviation reasons, saving the document. Then I made my billing document for 19 units of material.
The deviation reasons was a damage material, my questions is: How does make goods receipt for the items with difference over the quantities after the confirming of proof of delivery?
Thanks in advance
Edited by: Johnattan Company on Sep 8, 2009 3:45 PM
Edited by: Johnattan Company on Sep 8, 2009 3:59 PM

Hello Chetan,
Thinking in the process, I have found a solution to do it. If the differences was caused by unknowing reasons, like stolen or whatever reasons and the material will not enter again in the warehouse, we donu2019t need to make any process.
But if the causes was a broken material, a lapsed date expired or unknowing others reasons as a consequence the material will enter again in the warehouse; I have customized a returns order, and a returns item with the option not relevant for billing to conclude the process.
Thanks for your help.

HT203167 I am trying to download songs onto my PC it gets to about 85% download then my computer crashes. When I look in my account I have been charged for the items but it has not downloaded and there are no available downloads??

I am trying to download songs onto my PC it gets to about 85% downloaded and then freezes I have to turn off and restart but then I have been charged for the item but it is not available in my downloads can anyone help?

Welcome to the Apple Community.
Try deleting the problematic file (electing to remove original file if/when prompted) and then re-downloading the file from the iTunes store.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.

HT3231 What cables are necessary for the fastest transfer of data from MacBook Pro to MacBook Air

What cables are necessary for the fastest transfer of data from MacBook Pro to MacBook Air

As I posted "it is an Unknown", at least to me, what type FW port is on the OPs older Mac.
LowLuster
HT3231 Re: What cables are necessary for the fastest transfer of data from MacBook Pro to MacBook Air
Dec 26, 2013 8:04 PM (in response to OGELTHORPE)
But the newest Mac notebooks do not have a firewire port.
So he may need a TB to FW adapter, $29, a FW 400 or 800 cable, $??, and then a FW 400 to 800 cable/port adapter (If the old Mac only has a FW 400 port), $??.
It is unknown if the old Mac has a FW 400 or 800 port.

Please check excise base for the item is zero

Hi,
My scenario is Cross company Stock transfer (Two different Company Codes)
I have done following steps :
1.Create Purchase Order
2.Create Outbound Delivery for Purchase Order
3.Post Goods Issue for Delivery
4.Creating Billing Document
5.Creating Excise Invoice
6.Printing of Excise Invoice
7.Post Goods Receipt for Stock Transport Order
Till MIGO there is no problem.
I am getting a errro while doing MIGO with reference to Outbound Delivery, when I enter Excise Invoice created in sending plant, I am getting error as
"Please check excise base for the item is zero" - Message no. 4F121
Excise Duty values are flowing as per the excise invoice but system make base value as 0 , I have maintained Assesable value in J1ID also. We are using TAXINN.
Pl. help
Thanks
Vikas

hi
can u please share how u slove , we also face same issue
Thanks
Leo

Installment plan creation for the items on the Case

Hi,
Is it possible to create Installment plan for the Items that are part of the Case (Case Management)?
Transaction FPR1 exclude these items from selection!
Regards,
Miroslav

Hi Krishna
Yes I understand that, but sorry for not questioning since the beginning, I want a field which the system generates a number automatically for every items which can be used in the future for labeling or reporting purposes.
Please advice if there is such a functionality on the inventory module.
Thank you and best regards

Registration procedures necessary for the invoice issuance

Hi everyone,
We had requested a new G/L account registration with FI team.
FI has registered G/L code and released for testing. Now user has reverted with query, as
Weu2019re going to use the new G/L a/c primarily to issue more of sales invoices and receive payments on this account. Could you inform us if there are other registration procedures necessary for the invoice issuance?
Kindly suggest what are all necessary steps to perform this test - to post cutomer invoices and receive collections.
Thanks in advance
-Sumi

Hi,
Though my question is unanswered, still i m closing it, as no replies for last 3 -4 days.
Thanks.
-Sumi

No commit item for the item

hi,
when i am creating purchase order against accoount assingnment group "K".
i am getting an issue that it is saying
"no commit item for the item 10 and the company code 1000'
if i double click it
it is saying that no cash maangement, funds maangement is actived for the g/l account.
thanx in advance
regards,
balajit

no cash maangement, funds maangement is actived
Not sure but make a try as follows:-
A separate number range is required for posting plan line items failing which, you will have this issue.
Do the following:-
1) Go to IMG Financial Supply Chain Management --> Cash and Liquidity Management --> Cash Management --> Structuring --> Manual Planning --> Define Number Ranges
2) On the Cash Management and Forecast Number Ranges screen enter 1000 in the Company Code field.
3) Choose the Change Intervals push button
4) On the "Maintain Number Range Intervals" screen choose the Insert interval button and maintain the number range.
5) Next go to IMG Path Financial Accounting (New) --> Financial Accounting Global Settings (New) --> Global Parameters for Company Code --> Enter Global Parameters
6) On the Change View u201CCompany Code Global Datau201D: Overview screen, select company code 1000 and choose u201CDetailsu201D (F2).
7) On the Change View u201CCompany Code Global Datau201D screen, maintain as follows:-
Field Name:::::::::::::User actions and values
Cash Mgmt activated::::::::::::::X
Now retry the process and update whether the above helps you.
thanks
G. Lakshmipathi

Prerequisitions to be enabled/followed for the items that has to come in ASCP Collection Plan

Hi team,
I need to know what are all the prerequisitions to be enabled/followed for the items that has to come in ASCP Collection Plan (ie.,) the Item must be in Active status & Planning Method must be in MRP Planning like wise.
Anyone please give me the details.
Thanks in advance.
Suriya

Please check Support Note 1060245.1 Advanced Supply Chain Planning (ASCP) Item Collection Criteria
Regards,

Is EO necessary for the Item Style「MessageFileUpload」on EBS 12.1.3?

Similar Messages

Maybe you are looking for