Is Hosted VoIP Secure? Security Solutions Provider Unifies 30+ Locations w/VoIP

Can a hosted VoIP solution REALLY be as secure and as compliant as an on-prem solution? The answer is yes and with the right provider, possibly even MORE secure.As a security solutions provider, FishNet Security sets the bar high when selecting outside vendors. With 11 major offices across the U.S. and about 20 remote locations. The company primarily serves Fortune 500 clients, as well as a number of federal government departments. With almost 750 employees, FishNet Security has become the largest information security and infrastructure solutions providerIn November 2013, FishNet Security began looking for a cloud-based replacement solution for its on-premises IP PBX systems. “Primarily, we were focused on operations and reliability, ease of use, and reducing the amount of system administration required,” said FishNet's IT architect. “...
This topic first appeared in the Spiceworks Community

Kenneth,
If that's the case you can use a range of port and create a NAT using your outside interface IP.
object network CUCM_Private
  host 10.10.10.10
object service Range_1024_65535
service udp source range 1024 65535
object service SIP_range
service tcp source range 5060 5061
nat (inside,outside) source static CUCM_Private interface service Range_1024_65535 Range_1024_65535
nat (inside,outside) source static CUCM_Private interface service SIP_range SIP_range
access-list outside_access_in permit tcp any object CUCM_Private eq 5060
access-list outside_access_in permit tcp any object CUCM_Private eq 5061
access-list outside_access_in permit tcp any object CUCM_Private range 1024 65535
Take in consideration that I am using different IP address, please use the correponding IP's.
Hope it helps,
Juan Lombana

Similar Messages

  • A problem with Client Security Solution patch for Mozilla Firefox3

    After I updated Client Security Solution to 8.20, the password manager cannot work in FF3 again.When I tried to reinstall the patch, it asked me whether to overwrite the files or cancel.  Then it indicates 'This patch has already been installed on this computer', but the problem exsits.

    Borntofly, I am glad that you brought this up as I have not been able to successfully use FF3 with CSS 8.1 or 8.2 and have provided feedback in this thread:
    http://forums.lenovo.com/lnv/board/message?board.id=Special_Interest_Utilities&thread.id=937&view=by...
    As much as I would like to upgrade to FF3, I have not had any success in either using the manual configuration changes noted in the above thread or by using the CSS Patch for FF3 provided by Lenovo on 8/6/08 found here:
    http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70132
    This patch appears to duplicate the manual efforts provided by member KTP in message 12 in the above provided link from what I can see.
    I have never had an issue using the TV password manager and IE7.  It is a very reliable combination.
    I have no issues at all using FF 2.0.0.16, CSS 8.1 or 8.2 (now on 8.2), and Thinkvantage (TV) Password Manager 3.00.0106.00 (came with CSS 8.2).  I have never had Lenovo Password Manager on my T60.  Everything works reliably well with this combination.
    In 3 hours of work yesterday, I was able to get TV Password Manager to show up in the FF3 add-ons as TV Password Manager 3.01 and this is the only way I was able to make it work, but only for a single browser session:
    1. Tools --> Add-Ons
    2. Disable TV Password Manager, then restart FF3
    3. Tools --> Add-Ons
    4. Enable TV Password Manager, then restart FF3
    5. TV Password Manager will work for the duration that I am using the browser session
    Once I close FF3 and reopen it, TV Password Manager no longer works.  The only method I have found to "reset" everything is to perform the above sequence, but again it only works for the single browser session.  It is very consistent.  Although in does not show this in the Add-Ons page, it almost appears that the TV Password Manager add-on is disabled after I close the browser and needs to be manually disabled then enabled as noted above.  If this is due to a conflict with other software on my laptop, I have not been able to determine this.
    In my efforts yesterday, I spent time uninstalling CSS 8.1 or 8.2, FF, and even removed registry entries related to these packages in order to start with a fresh install, all without any success.  I tried fresh installations and added the manual changes promoted by KTP and also tried fresh installations using the Lenovo patches, all without success.  I made attempts to troubleshoot to root cause by removing all add-ons except TV Password Manager, and also tried preventing certain software from installing at startup via msconfig, as well as multiple settings changes within FF3, all to no avail.  Again FF 2.0.0.16 continues to work very well with little effort on my part.  I simply install the software and ensure that TV Password Manager 2.0 in installed in the add-ons and that's it.
    In the above FF3 thread, it appears that others have had success with KTP's changes so I am a little frustrated that I cannot make FF3 and TV Password Manager work reliably.  I have FF2 and IE7 working so I have plenty of good alternatives at this time.  I will post this at the FF3 above as well to see if anyone has any feedback. 
    Moderator(s), do you wish for this thread to be integrated in the original thread for this issue?
    T60, 8744-5BU: 2.0 GHz T7200, 4 GB RAM, 15.4" WSXGA+, 1680x1050 ATI Mobility Radeon X1400, Win 7 Ultimate w/SP1 - 64-bit

  • OPSS java security policy provider error

    hi am geting the security error when deploying application my logs is
    *** Using HTTP port 7101 ***
    *** Using SSL port 7102 ***
    "C:\Documents and Settings\Desmond\Application Data\JDeveloper\system11.1.2.1.38.60.81\DefaultDomain\bin\startWebLogic.cmd"
    [waiting for the server to complete its initialization...]
    JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
    WLS Start Mode=Development
    CLASSPATH=C:\oracle\MIDDLE~1\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;C:\oracle\MIDDLE~1\patch_wls1035\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\oracle\MIDDLE~1\patch_jdev1112\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\oracle\MIDDLE~1\JDK160~1\lib\tools.jar;C:\oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.5.0.jar;C:\oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;C:\oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;C:\oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;C:\oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbyclient.jar;C:\oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar
    PATH=C:\oracle\MIDDLE~1\patch_wls1035\profiles\default\native;C:\oracle\MIDDLE~1\patch_jdev1112\profiles\default\native;C:\oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;C:\oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;C:\oracle\MIDDLE~1\JDK160~1\jre\bin;C:\oracle\MIDDLE~1\JDK160~1\bin;C:\forms;C:\product\11.2.0\dbhome_1\bin;C:\product\11.2.0\dbhome_1;C:\DevSuiteHome_1\BIN;C:\DevSuiteHome_1\jlib;C:\Program Files\PHP;C:\Program Files\PC Connectivity Solution\;C:\windows\system32;C:\windows;C:\windows\System32\Wbem;C:\Program Files\Common Files\Roxio Shared\DLLShared;C:\Program Files\Common Files\Roxio Shared\DLLShared;C:\Program Files\Common Files\Roxio Shared\9.0\DLLShared;C:\Program Files\Common Files\DivX Shared;c:\Program Files\Java\jdk1.6.0_21\bin;C:\product\11.2.0\dbhome_1\BIN;C:\DevSuiteHome_1;C:\Program Files\Common Files\Roxio Shared\10.0\DLLShared;C:\Program Files\Common Files\Roxio Shared\DLLShared;C:\Program Files\Common Files\Roxio Shared\10.0\DLLShared;C:\mywls;C:\mydomain\base_domain\bin;C:\Program Files\Java\jre6\bin\client;C:\Program Files\Java\jre6\bin;C:\Program Files\Java\jdk1.6.0_21\jre\bin;C:\Program Files\Java\jdk1.6.0_21\bin;C:\Program Files\Java\jdk1.6.0_21;C:\Program Files\Java\jre6;C:\DevSuiteHome_1\forms;C:\DevSuiteHome_1\cgenf61\admin;C:\DevSuiteHome_1\forms;C:\forms\sms_code.pll;C:\mywls\wlserver\bin;C:\Java\jdk1.6.0_21;C:\oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
    * To start WebLogic Server, use a username and *
    * password assigned to an admin-level user. For *
    * server administration, use the WebLogic Server *
    * console at http:\\hostname:port\console *
    starting weblogic with Java version:
    java version "1.6.0_24"
    Java(TM) SE Runtime Environment (build 1.6.0_24-b50)
    Java HotSpot(TM) Client VM (build 19.1-b02, mixed mode)
    Starting WLS with line:
    C:\oracle\MIDDLE~1\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=C:\oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Djavax.net.ssl.trustStore=C:\DOCUME~1\Desmond\LOCALS~1\Temp\trustStore8732822766352054612.jks -Djbo.debugoutput=silent -Doracle.jdeveloper.adrs=true -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -da -Dplatform.home=C:\oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\oracle\MIDDLE~1\WLSERV~1.3\server -Djps.app.credential.overwrite.allowed=true -Dcommon.components.home=C:\oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=C:\DOCUME~1\Desmond\APPLIC~1\JDEVEL~1\SYSTEM~1.81\DEFAUL~1 -Djrockit.optfile=C:\oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config.dir=C:\DOCUME~1\Desmond\APPLIC~1\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\config\FMWCON~1\servers\DefaultServer -Doracle.domain.config.dir=C:\DOCUME~1\Desmond\APPLIC~1\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\config\FMWCON~1 -Digf.arisidbeans.carmlloc=C:\DOCUME~1\Desmond\APPLIC~1\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\DOCUME~1\Desmond\APPLIC~1\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=C:\DOCUME~1\Desmond\APPLIC~1\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=C:\DOCUME~1\Desmond\APPLIC~1\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\servers\DefaultServer\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=C:\oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=C:\DOCUME~1\Desmond\APPLIC~1\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\oracle\store\gmds -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\oracle\MIDDLE~1\patch_wls1035\profiles\default\sysext_manifest_classpath;C:\oracle\MIDDLE~1\patch_jdev1112\profiles\default\sysext_manifest_classpath weblogic.Server
    <22 Dec 2011 10:11:07 AM> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
    <22 Dec 2011 10:11:07 AM> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
    <22 Dec 2011 10:11:07 AM> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 19.1-b02 from Sun Microsystems Inc.>
    <22 Dec 2011 10:11:07 AM> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 >
    <22 Dec 2011 10:11:08 AM> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    <22 Dec 2011 10:11:08 AM> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
    <22 Dec 2011 10:11:08 AM> <Notice> <LoggingService> <BEA-320400> <The log file C:\Documents and Settings\Desmond\Application Data\JDeveloper\system11.1.2.1.38.60.81\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
    <22 Dec 2011 10:11:08 AM> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Documents and Settings\Desmond\Application Data\JDeveloper\system11.1.2.1.38.60.81\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log00004. Log messages will continue to be logged in C:\Documents and Settings\Desmond\Application Data\JDeveloper\system11.1.2.1.38.60.81\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log.>
    <22 Dec 2011 10:11:08 AM> <Notice> <Log Management> <BEA-170019> <The server log file C:\Documents and Settings\Desmond\Application Data\JDeveloper\system11.1.2.1.38.60.81\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log is opened. All server side log events will be written to this file.>
    oracle.security.jps.JpsRuntimeException: Cannot read from policy store.
         at oracle.security.jps.internal.policystore.xml.XmlPolicyStore.buildFromFile(XmlPolicyStore.java:440)
         at oracle.security.jps.internal.policystore.xml.XmlPolicyStore.<init>(XmlPolicyStore.java:227)
         at oracle.security.jps.internal.policystore.xml.XmlPolicyStoreProvider.getInstance(XmlPolicyStoreProvider.java:100)
         at oracle.security.jps.internal.policystore.xml.XmlPolicyStoreProvider.getInstance(XmlPolicyStoreProvider.java:74)
         at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.findServiceInstance(ContextFactoryImpl.java:139)
         at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:170)
         at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:191)
         at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:132)
         at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:127)
         at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:850)
         at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:844)
         at java.security.AccessController.doPrivileged(Native Method)
         at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:844)
         at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:291)
         at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:284)
         at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:270)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
         at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
         at java.lang.Class.newInstance0(Class.java:355)
         at java.lang.Class.newInstance(Class.java:308)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1339)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
         at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
         at weblogic.security.SecurityService.start(SecurityService.java:141)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    Caused by: oracle.security.jps.JpsRuntimeException: javax.xml.stream.XMLStreamException: javax.xml.stream.XMLStreamException: Premature end of file encountered
         at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.getDataStoreEntryStax(XmlDataStoreParser.java:166)
         at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.getDataStoreEntry(XmlDataStoreParser.java:180)
         at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.getDataStoreEntry(XmlDataStoreParser.java:187)
         at oracle.security.jps.internal.core.datastore.xml.XmlDataStore.loadXmlDataStore(XmlDataStore.java:418)
         at oracle.security.jps.internal.core.datastore.xml.XmlDataStore.<init>(XmlDataStore.java:283)
         at oracle.security.jps.internal.core.datastore.xml.XmlDataStore.getInstance(XmlDataStore.java:216)
         at oracle.security.jps.internal.policystore.xml.XmlPolicyStore.buildFromFile(XmlPolicyStore.java:436)
         ... 28 more
    Caused by: javax.xml.stream.XMLStreamException: javax.xml.stream.XMLStreamException: Premature end of file encountered
         at weblogic.xml.stax.XMLStreamReaderBase.prime(XMLStreamReaderBase.java:80)
         at weblogic.xml.stax.XMLStreamReaderBase.setInput(XMLStreamReaderBase.java:99)
         at weblogic.xml.stax.XMLStreamInputFactory.createXMLStreamReader(XMLStreamInputFactory.java:316)
         at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.getDataStoreEntryStax(XmlDataStoreParser.java:98)
         ... 34 more
    Caused by: javax.xml.stream.XMLStreamException: Premature end of file encountered
         at weblogic.xml.stax.XMLStreamReaderBase.prime(XMLStreamReaderBase.java:69)
         ... 37 more
    <22 Dec 2011 10:11:10 AM> <Error> <Security> <BEA-090892> <The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider>
    <22 Dec 2011 10:11:10 AM> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider
    weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1398)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
         at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
         at weblogic.security.SecurityService.start(SecurityService.java:141)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         Truncated. see log file for complete stacktrace
    Caused By: oracle.security.jps.JpsRuntimeException: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider
         at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:293)
         at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:284)
         at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:270)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
         Truncated. see log file for complete stacktrace
    Caused By: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider
         at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:899)
         at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:291)
         at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:284)
         at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:270)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         Truncated. see log file for complete stacktrace
    Caused By: java.security.PrivilegedActionException: oracle.security.jps.JpsException: [PolicyUtil] Unable to obtain default JPS Context!
         at java.security.AccessController.doPrivileged(Native Method)
         at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:844)
         at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:291)
         at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:284)
         at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:270)
         Truncated. see log file for complete stacktrace
    Caused By: oracle.security.jps.JpsException: [PolicyUtil] Unable to obtain default JPS Context!
         at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:860)
         at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:844)
         at java.security.AccessController.doPrivileged(Native Method)
         at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:844)
         at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:291)
         Truncated. see log file for complete stacktrace
    Caused By: oracle.security.jps.JpsRuntimeException: Cannot read from policy store.
         at oracle.security.jps.internal.policystore.xml.XmlPolicyStore.buildFromFile(XmlPolicyStore.java:440)
         at oracle.security.jps.internal.policystore.xml.XmlPolicyStore.<init>(XmlPolicyStore.java:227)
         at oracle.security.jps.internal.policystore.xml.XmlPolicyStoreProvider.getInstance(XmlPolicyStoreProvider.java:100)
         at oracle.security.jps.internal.policystore.xml.XmlPolicyStoreProvider.getInstance(XmlPolicyStoreProvider.java:74)
         at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.findServiceInstance(ContextFactoryImpl.java:139)
         Truncated. see log file for complete stacktrace
    Caused By: oracle.security.jps.JpsRuntimeException: javax.xml.stream.XMLStreamException: javax.xml.stream.XMLStreamException: Premature end of file encountered
         at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.getDataStoreEntryStax(XmlDataStoreParser.java:166)
         at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.getDataStoreEntry(XmlDataStoreParser.java:180)
         at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.getDataStoreEntry(XmlDataStoreParser.java:187)
         at oracle.security.jps.internal.core.datastore.xml.XmlDataStore.loadXmlDataStore(XmlDataStore.java:418)
         at oracle.security.jps.internal.core.datastore.xml.XmlDataStore.<init>(XmlDataStore.java:283)
         Truncated. see log file for complete stacktrace
    Caused By: javax.xml.stream.XMLStreamException: javax.xml.stream.XMLStreamException: Premature end of file encountered
         at weblogic.xml.stax.XMLStreamReaderBase.prime(XMLStreamReaderBase.java:80)
         at weblogic.xml.stax.XMLStreamReaderBase.setInput(XMLStreamReaderBase.java:99)
         at weblogic.xml.stax.XMLStreamInputFactory.createXMLStreamReader(XMLStreamInputFactory.java:316)
         at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.getDataStoreEntryStax(XmlDataStoreParser.java:98)
         at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.getDataStoreEntry(XmlDataStoreParser.java:180)
         Truncated. see log file for complete stacktrace
    Caused By: javax.xml.stream.XMLStreamException: Premature end of file encountered
         at weblogic.xml.stax.XMLStreamReaderBase.prime(XMLStreamReaderBase.java:69)
         at weblogic.xml.stax.XMLStreamReaderBase.setInput(XMLStreamReaderBase.java:99)
         at weblogic.xml.stax.XMLStreamInputFactory.createXMLStreamReader(XMLStreamInputFactory.java:316)
         at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.getDataStoreEntryStax(XmlDataStoreParser.java:98)
         at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.getDataStoreEntry(XmlDataStoreParser.java:180)
         Truncated. see log file for complete stacktrace
    >
    <22 Dec 2011 10:11:10 AM> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
    <22 Dec 2011 10:11:10 AM> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
    <22 Dec 2011 10:11:10 AM> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
    Process exited.
    this is what i have try to do
    delete the jazn-data.xml file under the DefaultDomain
    and i try to in the folder of C:\Oracle\Middleware\user_projects\domains\UCM_dom ain\config\fmwconfig open cwallet.sso, go to properties of it and then security.Enable full control,modify,Read and execute,read and write permissions for the current user and apply it. but there is no security option when i right click cwallet.sso
    and my acess log is
    27.0.0.1 - - [22/Dec/2011:12:10:09 -0800] "GET /StoreFrontModule/faces/login.jspx?_afrLoop=49432564240140&_afrWindowMode=0&Adf-Window-Id=w0 HTTP/1.1" 302 315
    127.0.0.1 - - [22/Dec/2011:12:10:09 -0800] "GET /StoreFrontModule/adfAuthentication HTTP/1.1" 302 313
    127.0.0.1 - - [22/Dec/2011:12:10:09 -0800] "GET /StoreFrontModule/faces/login.jspx HTTP/1.1" 200 5821
    127.0.0.1 - - [22/Dec/2011:12:10:09 -0800] "GET /StoreFrontModule/faces/login.jspx?_afrLoop=49432609646747&_afrWindowMode=0&Adf-Window-Id=w0 HTTP/1.1" 302 315
    127.0.0.1 - - [22/Dec/2011:12:10:09 -0800] "GET /StoreFrontModule/adfAuthentication HTTP/1.1" 302 313
    127.0.0.1 - - [22/Dec/2011:12:10:09 -0800] "GET /StoreFrontModule/faces/login.jspx HTTP/1.1" 200 5821
    127.0.0.1 - - [22/Dec/2011:12:10:09 -0800] "GET /StoreFrontModule/faces/login.jspx?_afrLoop=49432662731333&_afrWindowMode=0&Adf-Window-Id=w0 HTTP/1.1" 302 315
    127.0.0.1 - - [22/Dec/2011:12:10:09 -0800] "GET /StoreFrontModule/adfAuthentication HTTP/1.1" 302 313
    127.0.0.1 - - [22/Dec/2011:12:10:09 -0800] "GET /StoreFrontModule/faces/login.jspx HTTP/1.1" 200 5821
    Edited by: user603350 on 2011/12/22 12:04 PM
    Edited by: user603350 on 2011/12/22 12:17 PM
    Edited by: user603350 on 2011/12/22 1:12 PM

    The problem is that your WLS domain is created in a directory whose path contains blank spaces (e.g. "...\Document and Settings\...").
    Please, have a look at this message for a solution: {message:id=9588131}
    Dimitar

  • Security solution with Identity server for SOX compliance

    Hi all,
    Has anybody used Identity Server as security solution to achieve SOX compliance? i want to know general view, opinions , experiance of ppl while implementing such solution.
    Just a little background of SOX: It is Created by US Congress in the wake of corporate scandals like Enron in 2001 and 2002.it is an attempts to tighten controls over corporate financial reporting and transparency.
    I am basically interested in implementing security solutions using Identity server for SOX compliance. Section 404 of this act deals with internal controls, which essentially requires organizations to provide following facilities -
    1. User Identification, authorization and access
    2. User control of user accounts
    3. Central identification and access rights/permissions management
    4. Violation and security activity report
    Has anybody developed such solution? What are your general experiance, problems , issues etc? Please share your view....

    Just too quick to draw conclusion: See below FAQ
    If you are not in the same AS container, let me know. Jerry
    Copy from J2EE agent FAQ
    Question - Is it possible to install a J2EE 2.1agent and Identity Server on the same instance of the application server ?
    Installing the IS60SP1/IS61 server and J2EE 2.1 policy agent on the sameninstance of Application server is not a supported configuration. We do support the 21 J2EE agent and IS installed on different instances of the application server. So, users can install theJ2EE 2.1 agent on a one instance of the application server and install IS on a different instance of the apps server.

  • How do I launch and Reset Client Security Solution?

    W510, Windows 7 Professional, 64 bit, and I like using the Password Manager feature with fingerprint security.  During a recent printer installation I had to set-up a Windows Password (I never had one before). Now upon logging in, Client Security Solution continually provides error message ("Your windows password was changed recently. Please enter your Windows password to synchronize with Client Security Solution" - but it doesn't recognize anything I enter, including the current password. I can ignore the message but now I am locked out of some encrypted files.
    Lenovo Document ID#HT004617 correctly addresses this problem; but I'm stuck on their Solution Step #4 (Launch Client Security Solution) -  I'm supposed to launch the program, click advanced, and then select "Reset Security Settings."  Problem is there are over 4 dozen executable files in the (2) qty Client Security Solution sub-directories (c:/program Files (x86)/Lenovo/Client Security Solution and c:/Program Files/Lenovo/Client Security Solution) and I have yet to find one that properly launches the CSS program. (CSS is not available from the Lenovo ThinkVantage Tools menu). 
    How do I start CSS?  
    I keep machine up to date, ThinkVantage Fingerprint software #5.9.3, PW Manager version 3.20.0335.00. Machine is under warranty but Lenovo Support thus far unable to tell me what to do!
    I'm sure somebody here knows the right CSS file to run, and specific procedure to synchronize the Password, would sure appreciate some help on this, thank you!
    Solved!
    Go to Solution.

    Been away working, now back...
    It was an HP8500 Printer that started all of this.  I find it difficult to believe that a (simple?) printer install could do so much collateral damage...
    BACK TO MY ORIGINAL QUESTION - How do I reset CSS?  Per furnished Lenovo documentation, (found on the hard drive) CSS was never installed on Windows 7 machines (for some Lenovo reason).  I can export PWs to external drive but still have no idea how to launch the CSS files (of which several executable files came pre-loaded on my machine).
    As far as being locked out of files, Finale composition software now says (upon trying to open files) "You don't have permission to open this file. Contact the file owner or administrator to obtain permission.."
    Worst case, I can re-build my Finale composiitons, but I'm still annoyed with the Lenovo log-in screen constantly asking me to enter a password that I don't know!
    I am very dissapointed with purchased LENOVO WARRANTY SUPPORT - the people I've talked to have no idea about what I'm trying to explain to them.

  • Security solution

    Hi All
    I have to suggest a security solution to one of my customer who is having 40 branches within city connected thru RF
    Customer is looking a solution whenever any branch employee login on the site they receive a password on mobile phone or if not on mobile a seperate device for receiving the password , same as banks are offering this facility.
    If Cisco has this type of solution,kindly let me know
    Regards

    Hello,
         It seems like you are looking for the NAC Guest Server which can provide this functionality, you can take a look here:
         http://www.cisco.com/en/US/products/ps10160/tsd_products_support_series_home.html
    --Jesse

  • Lenovo Security Solution FP 5.9.2.5697 and firefox 3.6 + password bank extension not working ?

    Hi,
    I have a thinkpad T61 with WXP SP3 and I have recently upgraded the finger print software from the UPEK site after selecting the lenovo laptop and it took me to the lenovo support site where I have downloaded the latest finger print sofware protector suite ql and it was working fine recently Until i have upgraded my firefox 3.5 to ff 3.6 to the latest version. I have recently seen my lenovo software not working on the latest firefox 3.6 extension. I have contacted the UPEK guys and they said to contact the lenovo support since I have the customized version of their software which is true. I have tried to install the http://www.upek.com/support/customersupport/techsupport/Topic.asp?ID_Topic=76
    and its not working, i get a message that the passwork bank extension do not work with my latest ff 3.6. So please provide me the customized version of the latest password bank FP 5.9.2.5697 extension to use my t61 with the firefox 3.6. Please provide me the update asap after contacting the upek software. Please let me know if you need any details, I hope there are a lot of other customers as well who are facing the same problem as mine, since I have seen many blogs with the same question. So lenovo please help all the customers.

    I have exactly installed the extension rite on the releaes day....the one which u have sent but its not working on my system, I have wxp professional edition sp3 + firefox 3.6 + Lenovo security solution FP 5.9.2.5697 downloaded from the lenovo support site. I had it working until I had my firefox upgrade from 3.5.7 to 3.6 recently a week ago. I have upgraded the password bank from the upek site ( the link which u have sent) rite on the release day of the extension which is on the 28th Jan 2010 at around 1:00 PM since I was checking their update site very frequently and I was so happy that they have released the extension for ff 3.6 ..but after installing it dint work, I have to use IE8 which i do not like at all, but I had no choice since my ff 3.6 is not working at all with the upek ff 3.6 extension. When ever I open the ff 3.6 for the first time it says my installed upek extension do not work since its not supported. I am currently checking the lenovo forum and chekcing upek update link ...may be if some one will provide solution to this problem. I am in touch with UPEK tech support guys as well, they said to wait for some more days untill they release the customized extension version for the latest ps ql 5.9.2.5697 version and also doing the lenovo system update regularly twice to see ....if lenovo had released any customized version of the extension for the LSS FP 5.9.2.5697 users. I hope I had given u all the needed information, let me tell u my password bank is 100% legal and from the lenovo site and its absolutely working fine with my ie8 browswer. Let me know if u need any more information. I hope I am clear with my description.

  • Forescout mobile security solution vs Cisco ISE

    Hi,
    Can anyone provide me any link or document for comparison between "Forescout mobile security solution vs Cisco ISE".
    Thanks in Advance
    Manthan    

    Manthan,
    Please ask your question in AAA, Identity and NAC  community. There are experts in that community who can asnwer this question.
    -Rajeev

  • Client Security Solution CSP Only

    Hi,
    We have a bunch of t430, t440s in our environment. I would like to encrypt certificates using tpm. (the hdd is already encrypted with mcafee)
    I have installed client security solution and it provides a CSP for tpm, which does the trick. I've created MS CA templates and able to deploy certificates.
    But the question is, We dont want to have password manager or additional software in our clients, so I would like to know if you guys figured out to install (or register) only the CSP part of the software?
    By the way, anybody out there knows a proper way to reach lenovo support for techical issues? Our reseller has limited knowledge and I dont know how to get technical support.
    Best regards.

    This is from a post on the Thinkpads.com forum during the beta:
    I forget the name of the very clever person who figured this out, but it wasn't me.
    How to install Client Security Solution on Windows 7:
    1. Download the software from Lenovo at http://www-307.ibm.com/pc/support/site. ... 69986.html [didn't get the complete link when I copied and pasted, but CSS for Vista x64 isn't difficult to find on the Lenovo web site]
    2. Open the file tvtcss82v64_0023ww.exe to begin installation.
    3. When you get an error message about the wrong OS, do not click "OK." Instead, locate the file "Client Security - Password Manager.msi" (Look in "Users\Username\AppData\Local\Temp\{xxxxxxxxxxxxx}" - Note that the last folder is a randomly generated temp folder. The easiest way to find the right one is to look at the date it was created). Once you find the msi file, copy it to your desktop.
    4. Open the file from your desktop with Windows Install Editor using Wise Package Studio. Download a free copy at https://www4.symantec.com/Vrt/offer?_re ... _id=55188& [this isn't the correct link, but you can easily find it on the Symantec web site.]
    5. Go to the Setup Editor and find "Launch Conditions" on the Product Tab.
    6. Remove the Condition "VersionNT64=600 OR Installed" and save the package.
    7. Click "OK" on the error message that still remains on your desktop from attempting the installation.
    8. Run the .msi file from your desktop and complete the installation

  • Does Cisco Cloud E-mail Security Solution Support IPv6?

    For the Cisco Cloud E-mail Security Solution - does it support both inbound and outbound IPv6?  Are there any limitations?  I know the IronPort E-mail Security Appliances supports IPv6 - but specifically interested in the cloud service.
    Thanks,
    --Jim

    arkhane wrote:
    Hi.
    Does anyone could explain me about SSL/TLS?
    Here is the situation:
    E72 allows in securîty settings to select SSL/TLS. I selected it for both accessing and sending mails and I can logon to my POP and send with SMTP.  So apparently no problem.
    But I asked my internet provider if they support SSL/TLS and they told me no they does not support it....so my question is does really SSL/TLS works in my situation and my provider has no clue on security settings or SSL/TLS does not work but it has no incidence on using my mails as I said I can receive mails and send mails even if those security settings are selected...?
    Thanks if anyone could explain me this.
    Some e-mail providers like Gmail use SSL/TLS.
    http://mail.google.com/support/bin/answer.py?answer=13287
    ‡Thank you for hitting the Blue/Green Star button‡
    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

  • I forgot my icloud password but when I go to verify my birthdate in order to answer my security questions, it says "For your security, please provide a longer answer." can someone explain this to me? Seriously how can I provide a longer answer?

    I forgot my icloud password. I attemptted to reset it by going to my security questions and answering them but when I go to verify my birthday, it says
    Please verify your birth date to continue.
                         Month                     January                     February                     March                     April                      May                      June                     July                     August                     September                     October                     November                     December                                      Day                     1
    2
    3
    4
    5
    6
    7
    8
    9
    10
    11
    12
    13
    14
    15
    16
    17
    18
    19
    20
    21
    22
    23
    24
    25
    26
    27
    28
    29
    30
    31                                          Year                         2014
    2013
    2012
    2011
    2010
    2009
    2008
    2007
    2006
    2005
    2004
    2003
    2002
    2001
    2000
    1999
    1998
    1997
    1996
    1995
    1994
    1993
    1992
    1991
    1990
    1989
    1988
    1987
    1986
    1985
    1984
    1983
    1982
    1981
    1980
    1979
    1978
    1977
    1976
    1975
    1974
    1973
    1972
    1971
    1970
    1969
    1968
    1967
    1966
    1965
    1964
    1963
    1962
    1961
    1960
    1959
    1958
    1957
    1956
    1955
    1954
    1953
    1952
    1951
    1950
    1949
    1948
    1947
    1946
    1945
    1944
    1943
    1942
    1941
    1940
    1939
    1938
    1937
    1936
    1935
    1934
    1933
    1932
    1931
    1930
    1929
    1928
    1927
    1926
    1925
    1924
    1923
    1922
    1921
    1920
    1919
    1918
    1917
    1916
    1915
    1914
    1913
    1912
    1911
    1910
    1909
    1908
    1907
    1906
    1905
    1904
    1903
    1902
    1901
    1900
    1899
    1898
    1897
    1896
    1895
    1894
    1893
    1892
    1891
    1890
    1889
    1888
    1887
    1886
    1885
    1884
    1883
    1882
    1881
    1880
    1879
    1878
    1877
    1876
    1875
    1874
    1873
    1872
    1871
    1870
    1869
    1868
    1867
    1866
    1865
    1864                     For your security, please provide a longer answer.
    Seriously how am I suppose to provide a longer answer?

    If you are having problems using the website to reset your password, you can call AppleCare support.  They can assist you with AppleID issues, and I believe there will be no charge for that.
    AppleCare phone number: (800)-694-7466

  • Client security solutions TMP error message on a t60 with XP

    I just installed client security solutions and I’m getting the follow error message.  When I go to programs and click no security solutions opens.  This t60 is new to me so I’m not sure which questions to ask.
    I have the fingerprint reader working
    What should I ask or tell
    Any advice?
    Thanks
    http://i456.photobucket.com/albums/qq289/elktraveling/TPMerror.jpg
    <a href="http://s456.photobucket.com/albums/qq289/elktraveling/?action=view&current=TPMerror.jpg" target="_blank"><img src="http://i456.photobucket.com/albums/qq289/elktraveling/TPMerror.jpg" border="0" alt="Photobucket"></a>
    [IMG]http://i456.photobucket.com/albums/qq289/elktraveling/TPMerror.jpg[/IMG]

    Who has client security, restore and fingerprint reader all working together?  I did updates and when one works the other doesn’t.  If I could find all three that work I would be happy.  If you give me your versions numbers that works on yours that would be great.  I have a T60 running XP

  • Which Business Security Solution is common seen / used in your country? [malware event]

    Hi all
    I believe some of the technical people would be curious and try to find out what security solutions is used for government, education, place of interest or organizations. I am one of it.  * I did not use any of their machines, I saw it through Taskbar.
    I am not biased for any security products, this is based on what I seen outside.  Commonly either Symantec or McAfee in Singapore for business security. 
    Government managed hospital -  Symantec Antivirus Corporate Edition
    IBM Singapore - Symantec AntiVirus Corporate Edition
    Institute of Technical Education Singapore - Symantec Endpoint Protection
    Singapore Polytechnics (including Student's Personal Laptop if direct purchase) - Symantec Endpoint Protection
    Primary and Secondary Schools (under Ministry of Education) - McAfee VirusScan Enterprise
    SCDF - McAfee VirusScan Enterprise
    I also seen some Microsoft and ESET security products running around SMB when I was asked to go to client sites to assist setup for presentation. So far, I have not seen any other products from other security vendors.
    It would be great if you can share your findings, so all of us would know which security vendors is more popular for different areas, etc. 
    Cheers 
    Peter
    (Current: W520 4284-A99) (Refunded: W510 4876-A11)
    =============================================
    Does someone’s post help you? Give them kudos as a reward, as they will do better to improve 
    Mark it as solved if the solution works for you, so it could be reference for others in the future 
    Dolby Home Theater v4 (ThinkMix V2)!
    http://forums.lenovo.com/t5/W-Series-ThinkPad-Lapt​ops/W520-Sound-Enhancement-Thread/m-p/451401#M155... 
    Solved!
    Go to Solution.

    Hello,
    Here's a list of the companies I've come across, along with their notable consumer products:
    Agnitum Anti Virus/Outpost
    AhnLab V3 Internet Security
    Alwil Avast!
    ALYac Anti Virus/Internet Security
    Arcabit ArcaVir
    AVG Technologies AVG Anti-Virus/Internet Security (formerly Grisoft)
    Avira Antivir
    Bach Khoa Bkis BKAV
    Beijing Rising Anti Virus/Internet Security/PC Doctor
    Bullguard AV/Internet Security
    CheckPoint ZoneAlarm/AV/Internet Security (formerly Zone Labs)
    Comodo Anti Virus/Internet Security
    Dialogue Science Dr. Web
    Emsisoft Anti-Malware/Online Armour (formerly TallEmu)
    ESET NOD32/Smart Security
    F-Secure
    FilSecLab Twister
    Frisk F-PROT
    G Data Anti Virus/Interet Security
    GFI VIPRE (formerly Sunbelt Software)
    Hauri ViRobot
    Ikarus virus.utilities
    Lavasoft Ad-Aware
    K7 Anti Virus/Total Security/Ultimate Security
    Kaspersky Anti Virus/Internet Security/Pure
    Kingsoft Anti Virus
    MalwareBytes
    McAfee Anti Virus/Internet Security/Total Protection
    Microsoft Forefront/Security Essentials
    MWTI eScan
    Norman Anti Virus/Security Suite
    Panda Anti Virus/Cloud/Internet Security
    Qihoo 360
    Quick Heal Technologies QuickHeal Anti Virus/Internet Security/Total Security
    Softwin BitDefender AV/Internet Security/Total Security
    Sophos Anti Virus/Security Suite
    SOSDG ClamAV/ClamWin
    Support.Com - SUPERAntiSpyware
    Symantec Norton 360/Anti Virus/Internet Security, PC Tools
    Total Defense (formerly Computer Associates)
    Trend Micro Anti Virus/Internet Security/Titanium
    TrustPort
    VirusBlokAda VBA32
    Webroot Anti Virus
    WebSense
    That's off the top of my head.  There are probably a few others that I missed, but I'm sure others can help fill in the list.
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

  • Since updating to Firefox 4.0.1 I have lost the site security ranking provided by Norton. can I incorporate this in the latest Firefox? Failing that, how can I return to my previous version?

    Since updating to Firefox 4.0.1 I have lost the site security ranking provided by Norton. can I incorporate this in the latest Firefox? Failing that, how can I return to my previous version?

    http://community.norton.com/t5/Norton-Internet-Security-Norton/Norton-Toolbar-not-compatible-with-FF-4-0-1/td-p/442788

  • X61 - Vista Business - Client Security Solution Error - There was a problem connecting to the TPM

    During startup my x61 has been displaying the following message, 'Client Security Solution' - "There was a problem connecting to the TPM (security device) ont his computer. It is possile that anti-virus or firewall software is blocking the connection. A missing or disabled device driver could also cause this problem. Please refer to the online documentation for more information".
    I have spent an extraordinary amount of time and effort to find identify the cause and a solution for this problem. It occurs whether or not virus software is enabled or disabled and numerous calls to Lenovo, Symantec, Kaspersky, and Microsoft have resulted in finger pointing and no answers. None of the vendors acknowledge the problem yet this same issue is a significant topic of concern as found in various blogs and 'help' sites. Lenovo thought it was hardware and changed the motherboard. Lenovo told me to call Microsoft since it was a Vista issue. Microsoft told me to call Lenovo since Vista Business was preinstalled on the machine. Lenovo told me to call Microsoft and so it goes. I removed Symantec's anti-virus and replaced it with Kaspersky.
    The strangest thing is that the module works intermitently and it seems that everytime a Lenovo update is performed (via Thinkvantage) the problem reoccurs for sometime.
    Does anyone out there have an understanding of the cause and a potential solution???

    I have the same problem on an X 60 platform, which only surfaced in the last two weeks subsequent to running all of the Lenovo updates.   Prior to this, I had reinstalled all programs, starting with the Recovery Disks for the Think Pad.  Everything, including start up, was exceptionally fast.  Once I ran the most recent BIOS updates, along with several others, this error message surfaced.  It is intermittent, however, and I have not noted an issue.
    In reviewing several other Message Boards, I have seen this issue raised several times.  Here is a link to a thread where the individual did achieve a solution through Lenovo, but their response is nonspecific as to what they did:   (http://forums.lenovo.com/lnv/board/message?board.id=T400_series_ThinkPads&message.id=7143&query.id=1...

Maybe you are looking for

  • Function Module to retrieve "Start date of Next financial Period"

    Hi, I am doing an accrual financial posting, I would like to know that is there any function module that I can call to retrieve "Start date of Next financial Period" ? Thanks.

  • Workflow deadline expression problem

    Hi; I have a problem and I must solve . I created workflow and defined latest end (deadline) for activity . I selected refer data/time tabs and expression. I filled data and time as dynmically  in other words deadline change according to program.But

  • Question re Order of Sharpening and NR

    Hello all, Very quick question regarding order of sharpening and noise reduction. Is NR only supposed to be used to deal with sensor noise (like high ISO noise)? I ask because sharpening obviously introduces noise, which then could be tamed with NR (

  • Simple Question: Procedure parameters are same as table column names.

    Hi All, I'm having following procedure CREATE OR REPLACE PROCEDURE eb_test_update emp_no IN NUMBER := NULL, emp_name IN VARCHAR2 := NULL, return_status OUT VARCHAR2 AS l_emp_name VARCHAR2(50); BEGIN l_emp_name := emp_name; return_status := 'Success';

  • CS6 Configuration Error 16 - urgent

    I've been on chat help for over three hours. I've reassigned permisssions, used cleaner and reinstalled my programs. The only programs available are Acrobat and Air. I spent 4 hours yesterday trying to find a resolution without adobe's help. I have a