Is it a way to read Multiple Attachment and send all - Mail Sender?

Hi Friends ,
 Can you please tell me how to send multiple Attachment in Mail Sender Adapter ?
 I am able to bring Multiple Attachement in Payload .But, Only one attachemen't data is passed to IS.
 First form the attachement i read as row bye row. Rowe like 123 56 98 56 96 like that , then in Integration Process i am using XSLT Mapping to get my required format .
 It is getting the data from the First Attachement only. But i am having Three attachement in payload as MailAttachement-1 , MailAttachement-2 , MailAttachement-3 like that .
 Can you please tell me how to pass to IS as one by one attachement ?
Regards .,
V.Rangarajan

You want to separate each attachment in one single message?
If yeah, change your xslt mapping to a multimapping, which generate the several messages.
If not, in the receiver mail adapter, select "keep atachments" checkbox.
Regards,
Henrique.

Similar Messages

Read multiple files and save all into one output file(AGAIN)

Hi, guys
I need your help for reading data from multiple files and save the results into one output file. When files are selected from file chooser, my program read the data line by line , do some calculations and save the result into the output. I made an array to store input files and it seems to be working fine, but when it comes to SaveFile() function, issues NullPointException message.
public class FileReduction1 extends JFrame implements ActionListener
 // GUI definition and layout
 /* ACTION PERFORMED */
 public void actionPerformed(ActionEvent event) {
 if (event.getActionCommand().equals("Open File")) getFileName();
 /* OPEN THE FILE */
 private void getFileName() {
 // Display file dialog so user can select file to open
 JFileChooser fileChooser = new JFileChooser();
 fileChooser.setFileSelectionMode(JFileChooser.FILES_ONLY);
 fileChooser.setMultiSelectionEnabled(true);
 int result = fileChooser.showOpenDialog(this);
 // If cancel button selected return
 if (result == JFileChooser.CANCEL_OPTION) return;
 if (result == JFileChooser.APPROVE_OPTION)
 files = fileChooser.getSelectedFiles();
 textArea.setText("");
 if(files.length>0)
 filelist="";
 System.out.println("files length"+files.length);
 for(int i=0;i<files.length;i++)
 System.out.println(files.getName());
filelist+=files[i].getName()+" ,";
if (checkFileName(files[i]) )
openButton.setEnabled(true);
readButton.setEnabled(true);
textArea.append("file "+files[i].getName()+"is a proper file"+"\n");
readFile(files[i]);
textfield.setText(filelist);
else{JOptionPane.showMessageDialog(this,"Please select file(s)",
 "Error 5: ",JOptionPane.ERROR_MESSAGE); }
 // Obtain selected file
/* READ FILE */
private void readFile(File fileName_in) {
// Disable read button
readButton.setEnabled(false);
// Dimension data structure
 getNumberOfLines(fileName_in);
 data = new String[numLines][4];
 // Read file
 readTheFile(fileName_in);
 // Rnable open button
 openButton.setEnabled(true);
/* GET NUMBER OF LINES */
/* Get number of lines in file and prepare data structure. */
private void getNumberOfLines(File fileName_in) {
int counter = 0;
 // Open the file
 openFile(fileName_in);
 // Loop through file incrementing counter
 try {
 String line = fileInput.readLine();
 while (line != null) {
 counter++;
 System.out.println("(" + counter + ") " + line);
line = fileInput.readLine();
 numLines = counter;
closeFile(fileName_in);
 catch(IOException ioException) {
 JOptionPane.showMessageDialog(this,"Error reading File",
 "Error 5: ",JOptionPane.ERROR_MESSAGE);
 closeFile(fileName_in);
 System.exit(1);
/* READ FILE */
private void readTheFile(File fileName_in)
// Open the file
//int row=0;
int col=0;
openFile(fileName_in);
System.out.println("Read the file");
// Loop through file incrementing counter
try
String line = fileInput.readLine();
while (line != null)
boolean containsDoubles = false;
double temp;
String[] lineParts = line.split("\t");
try
for (col=0;col<lineParts.length;col++)
temp=Double.parseDouble(lineParts[col]);
data[row][col] = lineParts[col];
containsDoubles = true;
System.out.print("data["+row+"]["+col+"]="+lineParts[col]+" ");
} catch (Exception e) {row=0; col=0; temp=0.0;}
if (containsDoubles){ row++;}
System.out.println();
line = fileInput.readLine();
catch(IOException ioException)
JOptionPane.showMessageDialog(this,"Error reading File", "Error 5: ",JOptionPane.ERROR_MESSAGE);
closeFile(fileName_in);
System.exit(1);
//System.out.println("length"+data.length);
closeFile(fileName_in);
process(fileName_in);
/* CHECK FILE NAME */
/* Return flase if selected file is a directory, access is denied or is
not a file name. */
private boolean checkFileName(File fileName_in) {
 if (fileName_in.exists()) {
 if (fileName_in.canRead()) {
 if (fileName_in.isFile()) return(true);
 else JOptionPane.showMessageDialog(null,
 "ERROR 3: File is a directory");
 else JOptionPane.showMessageDialog(null,
 "ERROR 2: Access denied");
 else JOptionPane.showMessageDialog(null,
 "ERROR 1: No such file!");
 // Return
 return(false);
/* OPEN FILE */
private void openFile(File fileName_in) {
 try {
 // Open file
 FileReader file = new FileReader(fileName_in);
 fileInput = new BufferedReader(file);
 catch(IOException ioException) {
 JOptionPane.showMessageDialog(this,"Error Opening File",
 "Error 4: ",JOptionPane.ERROR_MESSAGE);
 textArea.append("OPEN FILE\n---------\n");
 textArea.append(fileName_in.getPath());
 textArea.append("\n");
 //System.out.println("File opened successfully");
/* CLOSE FILE */
private void closeFile(File fileName_in) {
if (fileInput != null) {
 try {
 fileInput.close();
 catch (IOException ioException) {
 JOptionPane.showMessageDialog(this,"Error Opening File",
 "Error 4: ",JOptionPane.ERROR_MESSAGE);
System.out.println("File closed");
private void process(File fileName_in) {
//getNumberOfLines();
 //data = new String[numLines][3];
 // Read file
double temp,temp1;
 //readTheFile();
//System.out.println("row:"+row);
//int number=data.length;
//System.out.println(number);
for (int i=0; i<row; i++)
temp=Double.parseDouble(data[i][1]);
sumx+=temp;
temp1=Double.parseDouble(data[i][3]);
sumy+=temp1;
multixy+=(temp*temp1);
square_x_sum+=(temp*temp);
square_y_sum+=(temp1*temp1);
//System.out.println("Sum(x)="+sumx);
double tempup=(row*multixy)-(sumx*sumy);
double tempdown=(row*square_x_sum)-(sumx*sumx);
slope=tempup/tempdown;
double tempbup=sumy-(slope*sumx);
intb=tempbup/row;
double tempside=(row*square_y_sum)-(sumy*sumy);
double cordown=Math.sqrt(tempdown*tempside);
corr=tempup/cordown;
r_sqrt=corr*corr;
 textArea.append("Data for file"+ fileName_in.getName()+" have been processed successfully.");
 textArea.append("\n");
 textArea.append("Please enter output file name including extension.");
System.out.println("number"+row);
System.out.println("slope(m)="+slope);
System.out.println("intecept b="+intb);
System.out.println("correlation="+corr);
System.out.println("correlation="+r_sqrt);
saveFile();
private void saveFile()
textArea.append("SAVE FILE\n---------\n");
if (openFile1())
 try {
 outputToFile();
catch (IOException ioException) {
 JOptionPane.showMessageDialog(this,"Error Writing to File",
 "Error",JOptionPane.ERROR_MESSAGE);
private boolean openFile1 ()
 // search for the file path
StringBuffer stringpath;
title=textfield1.getText().trim();
int temp=fileName_in.getName().length();
int temp_path=fileName_in.getPath().length();
int startd=(temp_path-temp);
stringpath=new StringBuffer(fileName_in.getPath());
stringpath.delete(startd, temp_path+1);
//System.out.println("file-path="+temp_path);
//System.out.println("length-file="+temp);
path=stringpath.toString();
fileName_out = new File(path, title);
//System.out.println(file_out.getName());
if (fileName_out==null || fileName_out.getName().equals(""))
 JOptionPane.showMessageDialog(this,"Invalid File name",
 "Invalid File name",JOptionPane.ERROR_MESSAGE);
 return(false);
 else
try
boolean created = fileName_out.createNewFile();
if(created)
fileOutput = new PrintWriter(new FileWriter(fileName_out));
fileOutput.println("File Name"+"\t"+"Slope(m)"+"\t"+"y-intercept(b)"+"\t"+"Coefficient(r)"+"\t"+"Correlation(R-Squared)");
return(true);
else
fileOutput = new PrintWriter(new FileWriter(fileName_out,true));
return(true);
catch (IOException exc)
JOptionPane.showMessageDialog(this,"Please enter the file name","Error",JOptionPane.ERROR_MESSAGE);
return(false);
private void outputToFile() throws IOException
// Initial output
 textArea.append("File name = " + fileName_out + "\n");
 // Test if data exists
 if (data != null)
 fileOutput.println(fileName_in.getName() +"\t"+ slope+"\t"+intb+"\t"+corr+"\t"+r_sqrt);
textArea.append("File output complete\n\n");
 else
textArea.append("No data\n\n");
 // End by closing file
initialcomp();
 fileOutput.close();
private void initialcomp()
slope=0.0;
intb=0.0;
corr=0.0;
r_sqrt=0.0;
sumx=0.0; sumy=0.0; multixy=0.0; square_x_sum=0.0; square_y_sum=0.0;
for(int i=0;i<data.length;i++)
for(int j=0;j<data[i].length;j++)
data[i][j]=null;
/* MAIN METHOD */
public static void main(String[] args) throws IOException
 // Create instance of class FileChooser
 FileReduction1 newFile = new FileReduction1("File Reduction Program");
 // Make window vissible
 newFile.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
 newFile.setSize(500,400);
newFile.setVisible(true);
Sorry about the long lines.
As you can see, all input files saved in array called files, however when OpenFile1() function is called, it take input (fileName_in) as a single file not an array. I'm assuming this causes the exception.
When there's muptiple inputs, program should take each file from getFileName() to outputToFile() sequentially.
Does anybody have an idea to solve this?
Thanks a lot!!

you naming convention is confussing. you should follows Java naming convention..you have a getXXX but decalred the return type as "void"...get usully means to return something...
your code is doing too much..and hard to follows..
1. get the selected files
for each selected file
process the file and return the result
write out the result.
/** close the precious resource */
public void closeResource(Reader in){
 if (in != null){
 try{ in.close(); }
 catch (Exception e){}
/** get the total number of line in a file */
public int getLineCount(File file) throws IOException{
 BufferedReader in = null;
 int lineCount = 0;
 try{
 in = new BufferedReader(new FileReader(file));
 while ((in.readLine() != null)
 lineCount++;
 return lineCount;
 finally{ closeResource (in); }
/** read the file */
public void processFile(File inFile, File outFile) throws IOException{
 BufferedReader in = null;
 StringBuffer result = new StringBuffer();
 try{
 in = new BufferedReader(new FileReader(inFile));
 String line = null;
 while ((in.readLine() != null){
 .. do something with the line
 result.append(....);
 writeToFile(outFile, result.toString());
 finally{ closeResource (in); }
public void writeToFile(File outFile, String result) throws IOException{
 PrintWriter out = null;
 try{
 out = new PrintWriter(new FileWriter(outFile, true)); // true for appending to the end of the file
 out.println(result);
 finally{ if (out != null){ try{ out.close(); } catch (Exception e){} } }
}

Is there a way to select multiple files and initiate the Capitalize function?

I have hundreds of files all in upper case that are driving me crazy. I can select them one at a time, right click and then select Transformations/Capitalize. Is there a way to select multiple files and initiate the Capitalize function?

You could use Automator to do this - take a look at the article at http://www.wikihow.com/Batch-Rename-Files-in-Mac-OS-X-Using-Automator to see how this might be done.
Good luck...

Read MULTIPLE idocs data with all sgmn to my internal table in a single

Dear SAP Folks!
I have a question, I know to read SINGLE idoc data with all segments, we have FM IDOC_READ_COMPLETELY but my requirement is to Read MULTIPLE idocs data with all segments to my internal table in a single shot without keeping this FM in loop! since it is performance issue, at a time i may want to read 1000 idocs data!
Could anyone please let me know is there any way to get this, keeping mind of performance and any other FM?
Best Regards,
Srini

Hi,
I know idoc numbers and i can write a select Query to DB table EDID4 to get all segments data to my internal table. But i am looking for FM to do this. because i have too many number of idocs and each idoc is having many segments(I am thinking in performance point of view!) The FM IDOC_READ_COMPLETELY can accept only ONE IDOC number as import parameters at a time to get segment data. in similar way do we have any other FM? or other way? except select query to EDID4 table?
Best Regards,
Srini

What is the best way to safeguard my files and pictures before I send off my MacBook Pro to get fixed?

What is the best way to safeguard my files and pictures before I send off my MacBook Pro to get fixed? I am running Mavericks and use an AirPort Time Machine to back-up all my files.

Back up all data on the internal drive(s) before you hand over your computer to anyone. You need at least two independent backups to be completely safe. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you know how to restore to an empty drive.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
*An SSD doesn't need to be zeroed.

Is there a way in Pages to show and print all the added "comments?" (those you add by highlighting text) I'd like students to be able to view my comments on printed version of their papers.

Is there a way in Pages to show and print all the added "comments?" (those you add by highlighting text) I am a teacher, and I would like students to be able to view my comments on printed versions of their papers. I know word displays the comments off to the side of the document, and those comments can be viewed all at once and printed alongside the document.

There doesn't appear to be a way to print conmments in either Pages or Numbers in the Mavericks versions.
Jerry

How to read multiple files and generate multiple files

Dear all, I would like to process some LTE measurement files. Currently I can only load a single file and process the data and save it to a single binary file. Since I would like to run the code continously, could someone show me how I can modify the code to load multiple files and specify multiple files to save the process the data please? I have attached the code to the question. Many thanks for your help.
Attachments:
RF Analyze IQ File.vi ‏46 KB

There is no official "bin" format and I am confused by some of your statements:
Kiwibunny wrote:
Currently I can only load a single file and process the data and save it to a single binary file. Since I would like to run the code continously, could someone show me how I can modify the code to load multiple files and specify multiple files to save the process the data please? I have attached the code to the question. Many thanks for your help.
What you could do is use "list folder" with *.bin as pattern, and use a FOR loop and iterate over all *.bin files found in a selected folder.
In any case, your code uses some weird constructs and you seem to do way to much. Are you using "continuous run" mode? Don't!
Use a proper state machine instead ot these stalling loops. Why do you need to query the queue after each enqueue? Why do you need a queue at all?
LabVIEW Champion . Do more with less code and in less time .

Is there a way to select multiple sequences and batch export them using the same settings in CS6?

I am a current Final Cut Pro7 user and looking to switch over to Premiere Pro CS6. We edit approx. 100 short (15 sec.) videos daily, and then select them all at the end of the day and batch export them over night using the same export recipe for all. I have having trouble finding an easy way to do this in Premiere pro CS6, as command +E is grayed out if i select more than one sequence at a time.
so far, it appears that i have to select each video individually and manually set encoding recipe and export location for each.... Not only would this be terribly time consuming, but it leaves a lot of room for error and missed videos. I thought i would be able to send all of the sequences to Adobe Media Encoder, but i dont see that option either.
Any suggestions/
thanks!

Open Media Encoder and add your Sequences:
File > Add Premiere Pro Sequence
Navigate to your Premiere Project and select it in the list.
You can then select multiple Sequences from the Project (Ctrl+Click)
and load them all at once into Media Encoder and apply
the same encoding preset to all Sequences at the same time.

How to send multiple attachment s with a mail??

Hi,
How to send multiple attachments with a mail??
Situation::
In my case i have 5 internal tables populated dynamically in the report.
I want to send them in .TXT format as attachment with 1 mail.
Can anybody tell me in 'SO_NEW_DOCUMENT_ATT_SEND_API1',
how we add multiple attachmants to table objin???
thanks,
deepak

Hi Deepak,
Please find the sample code for sending mail with multiple attachment.
Report ZPAN_02M                                        *
REPORT zpan_02m                                .
*-MAIN DECLARATION----
DATA: docdata    LIKE sodocchgi1,
      objpack    LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
      objhead    LIKE solisti1   OCCURS 1 WITH HEADER LINE,
      objtxt     LIKE solisti1   OCCURS 10 WITH HEADER LINE,
      objbin     LIKE solisti1   OCCURS 10 WITH HEADER LINE,
      objhex     LIKE solix      OCCURS 10 WITH HEADER LINE,
      reclist    LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
*-OTHER DECLARATIONS----
DATA : listobject   LIKE abaplist OCCURS 1 WITH HEADER LINE.
DATA : tab_lines(3) TYPE n.
DATA : att_type     LIKE soodk-objtp.
*OBJBIN = ' | '. APPEND OBJBIN.
*---For simple attachment -
DATA : BEGIN OF wi_data OCCURS 0,
         c1(10),
         c2(10),
       END OF wi_data.
wi_data-c1 = 'Line 1'.   wi_data-c2 = 'Line 1'. APPEND wi_data.
wi_data-c1 = 'Line 2'.   wi_data-c2 = 'Line 2'. APPEND wi_data.
wi_data-c1 = 'Line 3'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 4'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 5'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 6'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 7'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 8'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 9'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 10'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 11'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 12'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 13'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 14'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 15'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 16'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 17'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 18'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 19'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 20'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 21'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 22'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 23'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 24'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 25'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 26'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
class cl_abap_char_utilities definition load.
constants:
    con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
    con_cret type c value cl_abap_char_utilities=>CR_LF,
    con_nwln type c value cl_abap_char_utilities=>NEWLINE.
LOOP AT wi_data.
CONCATENATE wi_data-c1 con_tab
              wi_data-c2
            INTO objbin.
condense objbin.
CONCATENATE con_cret objbin INTO objbin.
APPEND objbin.
ENDLOOP.
*---CREATE MESSAGE : DOCDATA -
Name
docdata-obj_name = 'TEST_ALI'.
Subject
docdata-obj_descr = 'Test including ALI/HTML Attachment'.
*---CREATE MESSAGE : BODY -
objtxt = 'Test Document.'.
APPEND objtxt.
objtxt = 'You will find an ALI/HTML attachment in this message.'.
APPEND objtxt.
objtxt = 'Have a nice day.'.
APPEND objtxt.
*-CREATE PACKING LIST-----TEXT--
objpack-head_start = 1.
DESCRIBE TABLE objtxt LINES tab_lines.
READ     TABLE objtxt INDEX tab_lines.
docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num   = 0.
objpack-body_start = 1.
objpack-body_num   = tab_lines.
objpack-doc_type   = 'RAW'.
APPEND objpack.
*-CREATE PACKING LIST-----ATTACHMENT--
att_type = 'XLS'.
DESCRIBE TABLE objbin LINES tab_lines.
READ     TABLE objbin INDEX tab_lines.
objpack-doc_size = ( ( tab_lines / 2 ) - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num   = 0.
objpack-body_start = 1.
objpack-body_num   = tab_lines / 2.
objpack-doc_type   = att_type.
objpack-obj_name   = 'ATTACHMENT 1'.
objpack-obj_descr = 'Attached Document 1'.
APPEND objpack.
att_type = 'XLS'.
objpack-doc_size = ( ( tab_lines / 2 ) - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 14.
objpack-head_num   = 14.
objpack-body_start = 14.
objpack-body_num   = tab_lines / 2.
objpack-doc_type   = att_type.
objpack-obj_name   = 'ATTACHMENT 2'.
objpack-obj_descr = 'Attached Document 2'.
APPEND objpack.
*-CREATE RECEIVER LIST----
reclist-receiver = '[email protected]'. reclist-rec_type = 'U'.
APPEND reclist.
reclist-receiver = sy-uname.               reclist-rec_type = 'B'.
APPEND reclist.
*-SEND MESSAGE----
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
    document_data                     = docdata
    put_in_outbox                     = 'X'
    commit_work                       = 'X'
IMPORTING
SENT_TO_ALL                       =
NEW_OBJECT_ID                     =
TABLES
    packing_list                      = objpack
    object_header                     = objhead
    contents_bin                      = objbin
    contents_txt                      = objtxt
CONTENTS_HEX                      = objhex
OBJECT_PARA                       =
OBJECT_PARB                       =
    receivers                         = reclist
   EXCEPTIONS
     too_many_receivers               = 1
     document_not_sent                = 2
     document_type_not_exist          = 3
     operation_no_authorization       = 4
     parameter_error                  = 5
     x_error                          = 6
     enqueue_error                    = 7
     OTHERS                           = 8.
WAIT UP TO 2 SECONDS.
SUBMIT rsconn01 WITH mode = 'INT'
              WITH output = 'X'
              AND RETURN.
Hope this is enough for you...
Enjoy SAP.
Pankaj Singh.

Best way to manage multiple users and multiple devices?

I would like some advice on the best way to manage iTunes and devices synced to it for multiple users -- Here's the scenario: I have 2 grade-school aged kids, who each have an iPod Nano and are going to get my old iPhone 3G to use as an iTouch after I upgrade my phone to the iPhone 4. In addition to my iPhone, I have a MacBook, a 30GB iPod, and a iMac. We are also looking into buying an iPad that we'll want to use (among other things) to watch movies while traveling. All music/apps/movies are currently located in my iTunes account on the iMac, and we sync via my personal @mac.com account.
I don't want to simply set up separate iTunes accounts for each kid, as I'd like to be able to control what music & apps they buy/download, and I've already got a fair amount of "their" music/apps/movies in my account, and don't want to have to try and move it from my account to theirs. Any advice on how to best set up an iTunes sharing arrangement that allows me to control their accounts, and sync all of the above devices would be most appreciated. Thanks in advance.

turingtest2 wrote:
Wow, I'd forgotten that one...
as I said in the thread, that post did find it's way into my database
great stuff, tt2 !

Is there a way to select MULTIPLE tabs and then copy ALL of the the URLs and titles/or URLs+titles+HTML links? This can be done with the Multiple Tab Handler add on; However, I prefer to use a Firefox feature rather than download an add on. Thanks.

Currently, I can copy ONE tab's url and nothing else (not its name). Or I can bookmark all tabs that are open. However, I'd like to have the ability to select multiple tabs and then copy ALL of the the URLs AND their titles/or copy ALL of the URLs+titles+HTML links? This can be done with the Multiple Tab Handler add on; when I download the add on, I get a message saying that using the add on will disable Firefox's tab features. I prefer to use Firefox features rather than download and use an add on. Is there a way to do this without an add on?

Hi LRagsdale517,
You should definitely be able to upload multiple files by Shift-clicking or Ctrl-clicking the files you want to upload. Just to make sure you don't have an old version of the service cached, please clear the browser cache and then log in to https://cloud.acrobat.com/files. After clicking the File Upload icon in the upper-right corner, you should be able so select multiple files for upload.
Please let us know how it goes.
Best,
Sara

Read multiple files and write data on a single file in java

Hello,
I am facing difficulty that I want to read multiple files in java and write their data to a single file. Means Write data in one file from multiple files in java
Please help me out.
Naveed.

algorithm should be something like:
File uniqueFile = new File();
for (File f : manyFilesToRead)
while (readingF)
write(dataFromF, intoUniqueFile);

I thought there used to be a way to cycle through bookmarks and delete all those that have died, but I can not find it; ?

Simply that I remember years ago that I had an option which would try to open each bookmark and delete all the dead ones.
I would like it back.

The [https://addons.mozilla.org/en-US/firefox/addon/checkplaces/ CheckPlaces] add-on might help.

Thumbnails are all reading Media offline - and they all play fine

Hello all,
My firewire 800 drive dismounted when I attached an additional firewire drive onto the chain. As a result Final Cut froze. I had to to do a hard reboot because my entire machine froze up.
I finally restarted Final Cut and when I did, my thumbnails images which IU was ussing to select my B-roll showed the red Media Offline Icon for each piece of media.
The footage is on the drive and plays fine. I cannot proceed with my project if I those Icons are unavailable
Thank you,
Rob
Mac quad g5
Final Cut 5.04
osx10.4.6
Power Mac dual g5 Mac OS X (10.4.6) 4 gigs samsung ram
Power Mac dual g5 Mac OS X (10.4.6) 4 gigs samsung ram

After you follow Shane's suggestion, write yourself a big note and attach it to all your firewire drives. It should say -
"Do I feel lucky today? If not, shut down the computer before plugging and unplugging drives."
Yes, the specification for firewire suggests it should be hot swapable, but the reality of daily use, loose connectors, old or variable power supplies, and so on, can wreck havoc. Fried firewire ports, corrupted systems, scrambled data, and bad hair are only a few of the horrors that await you if you continue down this path.
Cheers.
x

Messages automatically marked as read in yahoo and unread in Mail

I typically use yahoo.com to view/read my yahoo mail, but I would like the option of viewing in Mail as well. However, when I launch my Mail account, all messages remain "unread" (whether I've read them or not in yahoo.com). And when I go to my yahoo.com account after opening Mail, all messages (whether I've read them or not in Mail) are automatically marked as "read". This is extremely frustrating as I would like both Mail and yahoo.com to reflect read and unread emails appropriately.
I do not have this problem when I use the Mail app on my iPhone.
Please help! Thank you!

UPDATE: In addition to all mail being marked as "unread" in yahoo.com, most messages older than a few days old are also deleted. They still appear in Mail, but I need to read them in yahoo.com as well. In addition, Mail does not contain the folders from yahoo.com, so all messages appear in Mail as one big "unread" mess in my inbox. Again, these issues are not a problem with the iPhone app. Thank you!

Is it a way to read Multiple Attachment and send all - Mail Sender?

Similar Messages

Maybe you are looking for