Is it bad to leave my mac on (not just asleep) constantly?

I leave my mac laptop on a lot (almost 24/7) and even go to sleep skyping with my friend all night. When going somewhere I usually just shut my laptop and pack it up  as well and want to know if this damages the harddrive and what I should do. Skype has been acting a bit weird and my internet connection was also out of wack the last day or so as well when it hasn't been an issue before (could be due to using skype and firefox at the same time but I am wondering if it should be able to handle that or not as well). The internet is fine but it is running slow and doesn't seem to be working correctly. I have already had a harddrive fail before due to a lose wire or something and don't want to go through that again.
What kind of things would shorten the lifespan of your harddrive and how much wear/use can they handle before they start to wear down? Also, how many applications should be able to run at the same time without things going slow? Is that an internet issue or my computer? If it is my computer then what is the best course of action I should take?
Thanks

If you have read the instruction manual, it says.  Leave your Mac asleep if you are going to use it the next day or the day after.  Switch it off if you are not going to use it for months.

Similar Messages

  • Is it bad to leave your iPhone connected to the charger constantly?

    I was looking at buying the Mophie juice pack plus and was seeing if it was bad to leave the mophie running while my iphone is fully charged.

    Battery life for your iPhone
    For proper maintenance of a lithium-based battery, it’s important to keep the electrons in it moving occasionally. Be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).

  • Bad version number on Mac, but not PC

    I have a java applet that works fine in Windows. It works fine on Macs as long as I compile it with JDK 1.5. However, once I compile it with JDK 1.6 it loads in Windows, but it doesn't load at all in Mac OSX. I've tried compiling it with javac using -target 1.5 -source 1.5 and -target 1.4 -source 1.4 but no luck.
    None of the computers I have tested on have JRE version lower than 1.5. The Mac I tested it on has JRE 1.5.16. I've also tested it on Ubuntu with JRE 1.5, which didn't work, and 1.6, which did work.
    Here is the error from appletviewer in Mac:
    appletviewer testprogram2.html
    2008-10-16 16:17:22.269 appletviewer[436:10b] _CFGetHostUUIDString: unable to determine UUID for host. Error: 35
    2008-10-16 16:17:22.546 appletviewer[436:e13] _CFGetHostUUIDString: unable to determine UUID for host. Error: 35
    2008-10-16 16:17:22.812 appletviewer[436:613] _CFGetHostUUIDString: unable to determine UUID for host. Error: 35
    Warning: Can't read AppletViewer properties file: /Users/miahx/.hotjava/properties Using defaults.
    java.lang.UnsupportedClassVersionError: Bad version number in .class file
    at java.lang.ClassLoader.defineClass1(Native Method)
    at java.lang.ClassLoader.defineClass(ClassLoader.java:675)
    at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
    at sun.applet.AppletClassLoader.findClass(AppletClassLoader.java:177)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:316)
    at sun.applet.AppletClassLoader.loadClass(AppletClassLoader.java:119)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
    at sun.applet.AppletClassLoader.loadCode(AppletClassLoader.java:605)
    at sun.applet.AppletPanel.createApplet(AppletPanel.java:723)
    at sun.applet.AppletPanel.runLoader(AppletPanel.java:652)
    at sun.applet.AppletPanel.run(AppletPanel.java:326)
    at java.lang.Thread.run(Thread.java:613)
    It looks like there is still a version compatibility problem, but from researching this error, just adding the -target and -source java versions when compiling should fix it. Maybe I'm going about this all wrong?
    Any ideas?
    Edited by: nikkorizz on Oct 16, 2008 2:23 PM
    Edited by: nikkorizz on Oct 16, 2008 2:52 PM

    The above workarounds don't work for me on Windows, the only thing that has worked for me is to set the prefs to tabbed whilst the script is running.
    function tabInterface(onOff) {
    if(onOff == undefined) onOff=true;
        var desc19 = new ActionDescriptor();
            var ref8 = new ActionReference();
            ref8.putProperty( charIDToTypeID('Prpr'), stringIDToTypeID('interfacePrefs') );
            ref8.putEnumerated( charIDToTypeID('capp'), charIDToTypeID('Ordn'), charIDToTypeID('Trgt') );
        desc19.putReference( charIDToTypeID('null'), ref8 );
            var desc20 = new ActionDescriptor();
            desc20.putBoolean( charIDToTypeID('EGst'), true );
            desc20.putBoolean( stringIDToTypeID('openNewDocsAsTabs'), onOff );
        desc19.putObject( charIDToTypeID('T   '), stringIDToTypeID('interfacePrefs'), desc20 );
        executeAction( charIDToTypeID('setd'), desc19, DialogModes.NO );
    function isTabInterface(){
    var ref = new ActionReference();
    ref.putEnumerated( charIDToTypeID("capp"), charIDToTypeID("Ordn"), charIDToTypeID("Trgt") );
    return executeActionGet(ref).getObjectValue(stringIDToTypeID('interfacePrefs')).getBoolean(stringIDToTypeID( 'openNewDocsAsTabs'));

  • 27 inch Mac will not stay asleep

    Bought my computer (which I love) this past Tuesday. At night put the computer into sleep mode by touching on/off button with the wireless mouse shut off. I am not using the wireless keyboard. Sometime after I have gone to bed the computer cycles back on and stays on. My wife is complaining that the light from the computer is keeping her awake. Anyone else having this same issue? Thanks for responding.

    In System Preferences -> Energy Saver, find the checkbox "wake for network activity" and uncheck it.

  • HT201250 My backup external hard drive hasn't work since I insalled Snow Leopard. Bad:(  I am still learning about my MAC and would just like to re-format the hard dive and set everything up again. I want to upgrade to Lion but can't untill I backup what

    My backup external hard drive hasn't work since I insalled Snow Leopard. Bad:(  I am still learning about my MAC and would just like to re-format the hard dive and set everything up again. I want to upgrade to Lion but can't untill I backup what I.

    Read through the links here, calm down and take your time.
    https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

  • I had to replace my hard drive twice in my power mac g5. Luckily, I had the foresight to install a backup drive the second time around. Has anybody had HD problems? Is it the Power Mac or I just lucked out on some bad drives.

    I had to replace my hard drive twice in my power mac g5. Luckily, I had the foresight to install a backup drive the second time around. Has anybody had HD problems? Is it the Power Mac or I just lucked out on some bad drives.

    Hi Leon,
    There are many well known G5 problems, but being hard on Hard Drives is not one of them.
    How old & what brand/model drives were they?

  • HT201328 Welcome to After I IPHONE 4 black and I want to open internationally so when you want to update the lock and leave me a sign I just want to open an apple and I have developed from my Mac in Saudi Arabia&

    Welcome to After I IPHONE 4 black and I want to open internationally so when you want to update the lock and leave me a sign I just want to open an apple and I have developed from my Mac in Saudi Arabia& the
    <Edited by Host>

    If you want to unlock an iPhone you must contact the carrier it is locked to.
    You are not communicating with Apple in these forums; we are just other users.

  • I need free space in my hard disk-- i want to delete all files. i want to leave my mac book like the first time.. what must to do ?

    i want delete all files and leave my mac book pro like the first time. i have system 10.7.5 , i have lot of files and need memory.. what must to do ?

    Install or Reinstall Mavericks or Mountain Lion from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    OS X Mavericks- Erase and reinstall OS X
    OS X Mountain Lion- Erase and reinstall OS X
    OS X Lion- Erase and reinstall Mac OS X
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.

  • When I try to exit a video on the internet I received a screen asking if I was sure I want to leave. It to not have a confirmation tag. But it has prevented Safari from shutting down. Now I can not turn off my Mac? How do I reset?

    When I try to exit a video on the internet I received a screen asking if I was sure I want to leave. It to not have a confirmation tag. But it has prevented Safari from shutting down. Now I can not turn off my Mac? How do I reset?

    What kind of videos are you watching? 
    You need to force quit Safari, but hitting Command-option-esc, and force quit Safari. 

  • Will installing lion os leave my mac as it is?

    I have win7 pro on my personal macbook air courtesy of my job (and parralels6). Now I have left but don't have the license key so can't re install. Will installing lion leave my mac "as it is" so to speak.

    no one knows, and if it was me, I'd just buy Windows 7 64-bit SP1 - probably only need home premium and system builder would set you back $99 and be legit and you can reinstall and have activation.
    Will Lion change the partitioin tables and support some? probably. Every OS change has. Do some using Boot Camp have an issue? or SL owners that upgrade? probably 10% definitely will.
    Just as 10.6.8 afftected Parallels 6 and required an update should be a clear sign, and warning.
    Boot Camp
    Parallels for Mac
    Parallels for Mac

  • Why my screen is keeping black screen when i leave the mac book with few hr

    when i leave the mac book pro on a few hours, it kept black screen. i try to press any key and open button, it kept no response. after 3 mins, i press open button again. the mac book appear off. so i press the open button again , it open.
    do i need to change a new mac book pro in this situation? because this is my new computer, i can change a new one within 10 days.
    plz give me some suggestion, thank you!!!

    In actual fact this seems a bigger problem than I thought. Linking the two computers via the Thundernolt cable and selecting cmd F2 no longer shares the screen at all and Apple say it may not be able too in Mointain Lion - What are they playing at, hundreds of customers link computers together and share the screens - Lets hope they are wrong and tell us what we need to do other than move back to Windows.

  • Is it bad to leave your iphone 5 charging all night?

    Is it bad to leave your iphone 5 charging all night?

    Not at all...
    http://www.apple.com/batteries/iphone.html

  • Does leaving your mac plugged in kill the battery

    does leaving your mac plugged in kill the battery?

    No, but it can shorten it's life, you should read this
    https://www.apple.com/batteries/notebooks.html

  • Is it bad to leave ipod in the dock

    I have a Belkin dock that connects to my receiver. It also charges my ipod. Is it bad to leave it in the dock for extended periods? Afraid of battery issues etc.

    No.  That should be just fine.  See this article for more details and information regarding your iPod's battery.
    http://support.apple.com/kb/TA26689
    B-rock

  • Leave your Mac On or Shut it Down???...What the Genius Say?

    Hi Guys!!!!!
    What do you think about leaving your Mac On or shut it down when you are not using it????
    Thanks.

    Hi,
    Sleep mode has to supply power to the RAM memory in order to facilitate rapid wake-up. On the MacBook, safe sleep is the default mode. The MacBook will wake itself up when the battery gets low, then save the memory image to a disk file before the battery runs out.
    In another thread, the same question came up. Users reported sleep would use about 4% of the battery every day. That seems very reasonable since a lithium ion battery will often discharge a few percent per day just sittig doing nothing.
    I turn my MacBook off when I am not using the MacBook. I am impressed at how quickly the MacBook boots up rom being totally off. If you are a heavy duty multitasking person, the obvious advantage of sleep is the applications you were usng last time are open with the files you were woking on already open when you wake up the machine.
    If you worry about wearing out the battery, you can change the sleep mode with the command line tool called pmset. You can use pmset to set the default sleep mode to always deep sleep to disk. The disadvantage of deep sleep is it takes longer to wake up, but is does reduce unnecessary battery use.
    This thread discusses the use of pmset:
    http://discussions.apple.com/thread.jspa?messageID=5981685
    Bill

Maybe you are looking for

  • How to log in to VC as known user?

    When I connect to a VC server from bridge, it only asks for a URL, not a username. If I try to put a username in the URL it just refuses to connect. Because everything on this server requires a login, and it doesn't know who I am, nothing is visible

  • Will Macbook Pro Core 2 Duo perform well enough with Mainstage.

    Hi there, I normally keep each of my macs for about 4-5 years before upgrading, and its about that time for me. I currently have a 2.5GHz Intel Core 2 Duo with 4GB Ram, and am leaning towards getting a new 27 inch imac for my home studio. My alternat

  • Printing double line / small box residing in main box - Invoice smartform

    Hi, I have 2 Invoice smartforms, meant for Country_A and Country_B. We r on ECC 6.00 Country_A is printing fine. But, when comes to Country_B, in ITEM table, the header box, (where column labels are printed), one more box is printing!! it looks like

  • I can't drag and drop word files to a folder

    I can't drag and drop word files to a folder. When I click and hold over a file, nothing happens. Normally it goes where I drag it.

  • Can't get rid of prohibitory icon no matter what I try

    Every time I try to start up, no matter what technique I use -- 10.3 System disk startup, Command S, x, the darned thing keeps giving me the prohibitory icon. All peripherals are removed. It was working fine a few hours ago. What appeared to preceed