Is it enough to simply specify the IP address of Port 2 on a Dual Port cRIO to force use of that port?

First time use of dual-port ethernet controller.
Looks like I just need to specify the correct IP address and LV RT "knows" which NIC to use? Makes sense, just double checking.
Thanks,
Wes
Wes Ramm, Cyth UK
CLD, CPLI

Hi Wes,
A KnowledgeBase article that talks about how you can configure the ethernet ports and what you can do with them can be found here along with a white paper here. Ethernet port 1 is used for communication between the cRIO and the host computer. Ethernet port 2 can communicate with a private network, but only within the limitations mentioned within the KB. If you want to use network published shared variables, you can only use them with one port since the Shared Variable Engine must be bound to that port.
Best Regards,
Matthew B.
Applications Engineer
National Instruments

Similar Messages

How to specify the IP address in ORB server with multiple IPs

I'm working on a platform using corba to communicate with each other. For some purpose the server use stringification method (http://www.javaworld.com/javaworld/jw-02-1999/jw-02-enterprise.html?page=2) to tell the client the reference of the remote object. The ior string contains the ip address information of the server. The problem is if I have two network interfaces installed in my machine (ex an ethernet plus an wireless card ) How can I specified the ip address used by the IOR?

Arumugam.M wrote:
I saw a forum with netsh for changing the ip address of local system,,,, but noe i couldn't find out that,,,, if any one know please post it,,,Please read the responses in http://forums.sun.com/thread.jspa?threadID=5336317&tstart=0 .

Changing the multicast Address and Port giving error

I am using Coherence 3.3.1 jar files (Coherence.jar and tangosol.jar) in my local application. But when I try to change the multicast Address and Port in tangosole-coherence.xml(in Coherence.jar) then it is giving this error -
"This member could not join the cluster because of an incompatibility between the cluster protocol used by this member and the one being used by the rest of the cluster. This is most likely caused by a Coherence version mismatch, or by mismatched protocol filters (e.g. compression, or encryption)"
If i am using unique IP and Port then how can it be in a Cluster as this error stating. Please reply ASAP.

Hi,
There is a good chance that there is already the IP and port is being used by another cluster (which uses different versions of jars or configurations) and hence, when you are starting your cluster, throwing the error.
Can you double check if another cluster is already using it or not ?
Thanks,
Amit

I want to set the IP address back to default on a HP LJ 4000n how do I do that?

I want to set the IP address back to default on a HP LJ 4000n how do I do that? The I/O would not let me or maybe just don't know how.

to do that, power off the printer and then press the Select button and power on, maintain the select button during start up.
But after that, I don't know how to setup a new IP adress
dwalker2 wrote:
I want to set the IP address back to default on a HP LJ 4000n how do I do that? The I/O would not let me or maybe just don't know how.
dwalker2 wrote:
I want to set the IP address back to default on a HP LJ 4000n how do I do that? The I/O would not let me or maybe just don't know how.
, is anybody can help us?

Getting the IP address and port number and placing it in a window

Hi Everyone,
I have written the code which gives the system time in a window. But I need also to have the Internet address and the port number of the client in the window. the TimeserverRF considers incoming DatagramPackets as a request for the current time, if the client wishes to receive the current time from TimeserverRF, it has only has to send a DatagramPacket to TimeserverRF.
I am not sure how to do this writing DatagramPackets .
I have the TimeClient class application. Timeclient should send the Internet address and the port on which it is running.
Do You have any ideas.
// the code for system time.
import javax.swing.*;
public class Window1 {
public static void main(String[] args) {
JFrame win = new JFrame("TimeServer running on port 9999");
JTextArea tA = new JTextArea(1, 30);
win.getContentPane().add(tA);
win.pack();
win.setVisible(true);
String s1; // initialise variables
TimeData t1; // TimeData object initalise to t1 variable
t1 = new TimeData(System.currentTimeMillis()); // start of loop body
s1 = t1.toTimeString(); // system time held sring s1
tA.append("Sent "); tA.append(s1); // Prints statement and time in Frame
}

Study this networking tutorial and then, if you have a specific question, create a new post with it.
http://java.sun.com/docs/books/tutorial/networking/index.html

I have changed my apple id email address but i cant change the id address for my icloud account on my iphone? how do i do that?

i have changed my apple id and password but it hasnt changed on my icloud account and i cant seem to chage it on my iphone. how do i change it from my old email id address to my new one?

Welcome to the Apple community.
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
When you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.

Where is the server address and port stored that is configured in NI License Manager?

Hi,
I am trying to configure a silent installation of LabView. I have tried the specfile and put in the license code etc.. I cannot see a place there to configure a license server address.
I've run NI License Manager on a reference PC and have configured one there but how can I deploy that config to a number of PCs? How is it stored and where is it stored?
thanks
Paul

Last question (I promise)
If I dont have a volume license how do I determine what my 'package' or 'family' is?
Package
Syntax: nilmUtil.exe -activate "packagename version"
Example: nilmUtil.exe -activate "LabVIEW_PDSM_PKG 8.0500"
Family
Syntax: nilmUtil.exe -family "family"
Example: nilmUtil.exe -family "LabVIEW_ADE_080600"

Is there possible to specify the source ip address used for Radius

I have a cat6509 configured to talk to Radius server (ACS), as I understood that the IP address used by Cat6k to talk to ACS is by using the nearest interface ip, can i explicitly specify the source address used by Cat6k in this case ?
thanks in advance.

I am not clear whether you are asking about talking to Radius from the switch or from the MSFC? If it is from the MSFC you are correct that by default it will use as source address the address of the outbound interface. On the MSFC you can use the command: ip radius source-interface to specify what address to use.
On the switch I think that it will source its packets to Radius using the management/console IP address rather than the outbound interface. So no command is needed to specify the source interface.
HTH
Rick

HT204161 I have separate apple ID, iTunes and iPad account. Can these be linked? Will simply changing the login info to match will this accomplish a link?

I have separate apple ID, iTunes and iPad accounts. Can these be linked/combined? Will simply changing the login info to match accomplish a link?

You should continue to use your Apple ID for your iTunes account whatever you do in terms of iCloud syncing and mobile me.
If you would like to use the Apple ID you use for iTunes for iCloud syncing. just create an iCloud account using that Apple ID. If you do this you will need to add an iCloud mail address which can't be your mobile me address as that is already taken.
If you want to create another Apple ID for use with iCloud so that you keep your @me address from your mobile me account you can do that by migrating from mobile me to iCloud, you can do that too, your Apple ID for iCloud will then be your @me address.
If you migrate your calendars and contacts will also be migrated and continue to work in iCloud. If you create an iCloud account using the Apple ID you use for iTunes you will be given the oportunity to merge your calendars and contacts.
Whichever you choose, it would be agood idea to export your calendars and contacts for back up purposes before doing anything.

Why can't I access the internet via ethernet port on my Airport Express?

I have an Airport Extreme base station and two Airport Express units. The Extreme is connected by ethernet to a BT Home Hub (BT is the internet provider). The network works for all the other computers that have Airport cards BUT I want to connect a Mac Mini (no airport card) by ethernet to the Express, but no matter how I try re-jigging the settings on the base station and Express, it won't connect. Mac Mini WILL connect when wired directly to the Extreme base station, so it's not the port. Also, I have been able to stream iTunes to the Express units so they are functioning in that respect. What am I doing wrong or not doing? Do I need to set up a WDS? Is there a bridging mode? Do I need to have a relay? Surely internet via the Express is possible!

The Airport Express units are the A1088 variety. The Extreme is A1354. Originally I set up the base station to create a network and got the Expresses to 'join network'. However, since that didn't work, I dug a little deeper and investigated WDS and bridge settings. The base station wireless mode is 'Create a network'. I selected 'allow this network to be extended' and made sure that the channel used was the same as the Express units. I have set up one Express to be a WDS remote and one to be a WDS relay on the same channel of the same network with the same password. I have specified the MAC address of the base as the main and the other MAC addresses in the appropriate places for the Expresses. I have tried selecting the 802.11b/g radio mode manually as well as in automatic. Access control is off for all units. I have tried the base station connection setting on 'Off (bridge mode)' and 'share a public IP address'. Am I just missing something?

How to specify source IP address when opening TCP connection?

Hi !
We are building a system in which a server communicates with a multi-homed Linux client with three network interfaces. All interfaces are routable to the server, but the server only accepts connections from one of those interfaces.
We need the server to specify different local source addresses for each client but the Open_TCP_Connection vi does not provide the capability to specify the local source address. Is there a way in LabVIEW open a TCP client connection and specify the source address?
Thanks,
-John

What you are describing would mean that your server machine is creating client to communicate with another server. Client never accept a connection. They alwasy connect to a server.
Mark Yedinak
"Does anyone know where the love of God goes when the waves turn the minutes to hours?"
Wreck of the Edmund Fitzgerald - Gordon Lightfoot

How can i change the email address for apple id and icloud?, how can i change the email address for apple id and icloud?

i had to change the email address to my apple id. now when ever i try to use imessage or the icloud, it wont let me because it is using the old email address. i cant change it on my phone and idk what to do on my computer!

If the old ID is yours, and if your new ID was created by editing the details of this old ID (rather than being an entirely new ID), go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

How do I change the email address where my itunes receipts go on my ipod touch?

On my ipod touch how do I change the email address where my itunes receips go?

Hi ipodreceipts,
Thanks for using Apple Support Communities. You can change the email address your receipts go to on your iPod touch by following these instructions and changing the email instead of the password:
iTunes Store settings - iPod touch
http://help.apple.com/ipodtouch/7/#/iph17ff8a531
To set options for iTunes Store, go to Settings > iTunes & App Store. You can:
View or edit your account. Tap your Apple ID, then tap View Apple ID. To change your password, tap the Apple ID field.
This article has a method for changing the email address receipts go to using a computer:
My iTunes Store receipts are going to my old email address
http://support.apple.com/kb/TS1645
Cheers,
- Ari

My Mac has been stolen, but I have my iCloud account setup. The "find my mac" app has found the apartment block it's in, but I need an IP address. Is there a way to see the IP address of my Mac through iCloud?

My Mac has been stolen, but I have my iCloud account setup. The "find my mac" app has found the apartment block it's in, but I need an IP address for the police to go and claim it. Is there a way to see the IP address of my Mac through iCloud? I've tried to get the IP address through Gmail and Dropbox but no success. Is there any software that updates automatically that I could find the IP address through?

Shouldn't the IP address be on the box you bought the machine in? If you have the box, take it to the police as evidence that it's your machine. If I were you, I would set the firmware password when you get it back, but make sure you have the password written down in a safe place. If you forget it, there's only two ways to reset it. Either pay $400+ for the tool that can do it, or pay almost nothing for Apple to do it, I think it depends on where you live. The firmware password is this encrypted password and it can't be hacked either. The password prevents anyone from booting the machine into recovery mode, thus preventing them from restoring the computer to factory settings or performing any other functions. It's not stored in the hard drive so replacing that will be of no use either.
I hope you get your Mac back and I hope this was helpful!

How to get the IP address of RMI server???

Hi:
Is there a way to know the IP address of RMI server before client and server connect?
I am assuming that client didn't know the IP address of the server.
Because I know that client must hold a server reference so that client can connect to server.
But I want my client program to find out server IP address before they connect and use this finding to connect to server.
Is it possible?
Thanks!

So you KNOW that the client MUST know where the server is yet you want the client to find out where the server is?
Simple answer: forget it.
If you don't know where to connect to how are you ever going to connect to it?
And if you do know you don't have to go looking it up...
You can probably do something with JNDI, but then you're only putting off the inevitable as now you need to both know how to contact the JNDI server AND the JNDI server needs to know where the the RMI registry for the service you want to connect to is.

Is it enough to simply specify the IP address of Port 2 on a Dual Port cRIO to force use of that port?

Similar Messages

Maybe you are looking for