OSB11134:the service is not testable since all its operations require Java

I was trying to Invoke the OSB Proxy service from weblogic Launch Test Console....but "Launch Test Console" icon is disabled.
it shows the message *"the service is not testable since all its operations require Java arguments""* when I move cursor on top of the icon
I am using OSB 11.1.3.4.
Can some one help on this?
Thanks in Advance.
AB

Export your project and send the exported jar to my id. By default, the name of exported jar is sbconfig.jar
http://download.oracle.com/docs/cd/E17904_01/doc.1111/e15867/import_export.htm#CIHHEJFJ
Regards,
Anuj

Similar Messages

Hi: my mac air safari is not loading all websites since i upgraded my software.. it download only few website and crome in the mac is not responding at all.. what to do please advise ???

Hi: my mac air safari is not loading all websites since i upgraded my software.. it download only few website and crome in the mac is not responding at all.. what to do please advise ???

Safari Problems
Safari - Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
Try setting up another admin user account to see if the same problem continues. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
If the problem is still there, try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About

'error 1069 - (The service did not start due to a logon failure) in BAM

I installed BAM on XP SP2, i do have IIS configured and XE DB, after installing when i tried starting the services as per post-installion guide.i did found the error 'An error 1069 - (The service did not start due to a logon failure).In google i could find a remedy saying
Remedy: Go to Start /Programs / Administrative tools / Services. Right-click the Goodlink Server and select Properties. Click the Log On tab. Retype the correct password. Start the Goodlink service.
i did so but did found the same error.So i tried changing a few things in LogOn tab such as " Earlier it was logging in from machine name and pwd , since it gave an error" i changed it to local system account ." now all services of BAM have started except Oracle BAM Active Data cache.
Anyone pls rep how do i resolve this? Do i need to re-install? i need this to be done very urgently.

Windows XP is not a certified platform for BAM. However, the product works fine on XP for evaluations and demos. For production, use a certified/supported version of Windows as is documented in the Software System Requirements section of the BAM Install Guide.
All Postinstall steps apply to all versions of Windows that BAM runs on except for the Postinstall step called "Required Configuration for Microsoft Windows Server 2003". As indicated by the step name, this one is for W2003 only.
"network not found windows 53 error" is generally a network, account or password issue. Please follow the Install Guide step by step to avoid installation issues like this.
See "Troubleshooting Start Page Issues" for start page problems.
As indicated in the Install Guide, you can use host names or IP addresses:
"12. On the Configure location of Oracle BAM step, enter the host name or the IP
address where each component is to be installed, even if it is not being installed at
this time, then click Next."
Regards, Stephen

I've tried to update my i-Tunes version after the site suggested I should following my i-Pad being plugged into it for the first time. The update seemed successful but the program would not open at all despite switching off the PC and re-starting several

I’ve tried to update my i-Tunes version after the site suggested I should following my i-Pad Air being plugged into it for the first time. The update seemed successful but the program would not open at all despite switching off the PC and re-starting several times. I then tried wiping the original software from the computer and re-downloading from scratch. Each time I tried the download failed with a message saying “Service “Apple Mobile Device” failed to start. Verify that you have sufficient privileges to start system services” At this stage, the only way forward was to “abort” the download. This I have done now four times and the same thing happens. When I did finally manage to get an i-Tunes shortcut on my desktop, the program wouldn’t open saying: “i-Tunes was not installed correctly. Please re-install i-Tunes. Error 7 (Windows error 193)” Any ideas to resolve this?

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

TS3694 I performed an iOS 7 software update on my iPhone yesterday, and now the phone is not working at all. The iPhone screen shows to connect to iTunes to restore. I've have done this, and still the iPhone is not working. What going on?

I performed an iOS 7 software update on my iPhone yesterday, and now the phone is not working at all. The iPhone screen shows to connect to iTunes to restore. I've have done this, and still the iPhone is not working. What going on?

I have no idea what may have caused your MacBook to stop working, but from your description it kind of sounds like it may have started before you ran Software Update and installed the new Apps. Just the general slow feeling and bugginess is what tips me off. You said that you weren't sure if you had closed all open windows, that doesn't matter if the computer restarts itself. It automatically closes all other open applications when restarting.
As to your data being retrievable, if when you take it in they do a fresh install of the OS, then no, it will not be unless you want to pay several thousand dollars to a software retrieval company.
I am glad to hear that you have taken into the Apple Store to get it fixed, and that you have all of your purchased music backed up to your iPod. You should be able to just transfer it all back to iTunes once you get your computer back should it be necessary.
As a side note, the proper place for this topic would probably in the MacBook forums, not iTunes since there is no evidence that iTunes started the issue.

I have an iphone 2g unlocked for tmobile. For the past 2 years it has worked fine then out of no where I get this message "your selected cellular network is no longer available" and the service cuts in and out all day. It can't find tmobile on my phone?

I have an iphone 2g unlocked for tmobile. For the past 2 years it has worked fine then out of no where I get this message "your selected cellular network is no longer available" and the service cuts in and out all day. It can't find tmobile on my phone for some reason but for 2 years previous it could no problem? tmobile says it is a problem with my phone and not their service.
Any ideas what to do?

I would just explain that this just started happening, that nothing has changed on the phone, that it is an original iPhone and I wondered if they are implementing a change in coverage with their Edge network in my area.
If you restore your phone, you will be given an option to back up your phone at the beginning of the process (see step 6 here: http://support.apple.com/kb/HT1414). You will be given the option to restore to that backup at the end of the restore process. Your messages are stored in the backup so restoring to the backup will return the messages to your phone. Be sure to import your photos and videos to your computer (see http://support.apple.com/kb/HT4083) and back up your contacts somewhere before restoring your phone as these sometimesget lost in the restore process.

The songs on my Ipod Classic wont play at all although you can feel and hear the machinery working hard. The tracks are not playng at all but you can see the Ipod rewinding them all and returning to the album. And this happens to the second IPOD I have!

The songs on my Ipod Classic wont play at all although you can feel and hear the machinery working hard. The tracks are not playng at all but you can see the Ipod rewinding them all and returning to the album. And this happens to the second IPOD I just got!

First off, I would STRONGLY suggest that a external hard drive would make you life much easier by at least being able to back up your songs on the external drive for when you need them. Even if you don't want them in the iTunes library, you can have them all ready on the external to be re-added as needed. You can get 100's of gigs for under $100 shipped.
Anyway, since you used Yamipod, are all the songs back on the computer? If so, I would go ahead and restore the iPod, let iTunes then resync everything back to the iPod, then switch it back to manual and see if the restore and resync clears up the issue.
Patrick

After updating my iphone 6 to ios 8.0.2, the iphone is not working at all!!

after updating my iphone 6 to ios 8.0.2, the iphone is not working at all!! the apple logo shows up for a few seconds. then the screen goes red !! after it restarts and it do the same!! please help.

Well, just for future reference, any time you do an iOS upgrade, it is a good idea to back up your device just prior to doing the download. You can back it up to iCloud or to iTunes. Personally, I prefer to back it up to iTunes, and then to do the download via iTunes as well. Doing a Wifi download can, by the very nature of the OTA environment, run into more issues than a hard-wired one via iTunes.
If it is just a version release (like 8.0.1, or 8.0.2), then I might download it via Wifi, since the content is not likely to be very large. But for any major new release (7 to 8, etc.) it is always a good idea to do it via the USB cable rather than OTA.
I would also suggest that you set up your device to do automatic iCloud backups. Whenever it is turned on (i.e., not manually powered off - it can be "asleep"), plugged into a power source, and connected to Wifi, it will do an automatic backup every 24 hours. Mine usually backs up at night.
But even with my iCloud backup in reserve, I still did an iTunes backup before I upgraded to iOS 8. I like having the extra security of that second backup to choose from, should I need it. Here is a support article comparing the two types of backup:
Choosing an iOS backup method (Should I use iTunes or iCloud to back up my iOS device?)
Sorry you lost your stuff. Hope then next update goes better for you!
Best of luck,
GB

An error 1069 - )The service did not start due to logon failure) occurred while performing this service operation ...

Hi All,
We seem to be being plagued by the error below by our SQL Server agent. This happens almost everytime we restart the server that has been running for a day or two.
Our SQL Server Agent uses a none expiring domain credential. I understand that this problem only happens when the profile being used by the SQL Servr Agent has changed (password change). What puzzles me is that the login is A ok and no changes has been made to it's password.
We always resolve this problem by changing the login used in the SQL Server Agent to local and after that, returning it back to it's original domain login. Unfortunately, we cant always do this everytime something goes wrong.
Can anyone please help us shed a light on this? We're using SQL2k with SP3a. Thanks!
Error:
An error 1069 - )The service did not start due to logon failure) occurred while performing this service operation on the SQLServerAgent service.
Regards,
Joseph

Ran into this error, and the password was correct. What the System Event Log said:
Code SnippetEvent Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7041
Date: 10/8/2008
Time: 9:33:09 AM
User: N/A
Computer: ComputerName
Description:
The SQLSERVERAGENT service was unable to log on as DomainName\SQLAgent with the currently configured password due to the following error:
Logon failure: the user has not been granted the requested logon type at this computer.
Service: SQLSERVERAGENT
Domain and account: DomainName\SQLAgent
This service account does not have the necessary user right "Log on as a service."
User Action
Assign "Log on as a service" to the service account on this computer. You can use Local Security Settings (Secpol.msc) to do this. If this computer is a node in a cluster, check that this user right is assigned to the Cluster service account on all nodes in the cluster.
If you have already assigned this user right to the service account, and the user right appears to be removed, a Group Policy object associated with this node might be removing the right. Check with your domain administrator to find out if this is happening.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp
...sure enough it had been removed from the "Logon as a service" list. Hope this helps.

Pricing procedure picked up from the service order not from the contract

Hello, All
I am working on CRM 5.0 service order and service contract,
While creating a service order a popup screen shows that there is a contract which should be assigned, after assigning the contract an error message appears showing that a condition type is missing, the missing condition type is in the pricing procedure of the service order not in pricing procedure of the service contract
Note: I set the copy control for the item category to copy all the condition
Regards
Jacopo François

Hi Jacopo,
Please check your pricing procedure settings and check for mandatory pricing condition.
Secondly, check the pricing agreement in the contract.
Best Regards,
Pratik Patel.
Reward with points if it is of any help to you!

ID 53 Details: The service did not respond to the start or control request in a timely fashion (0x8007041D))

One of my clients has his dpm server turned off for a long time. Now when that server is back online I cannot re-sync backup. First was database in suspect mode and I was not able to acess dpm console. Now when I fix that I cant re-sync job. I even tried
to delete on PG and recreate it but without success. Agent showing OK and it can comunicate with server. I have even tried to uninstall agent and re-install it but without luck.
ID 53 Details: The service did not respond to the start or control request in a timely fashion (0x8007041D))
That is the error what I get on all protection groups. Is there any one who can help with this?
And last thing is that DPM is crushing on recovery tab

Hi
Do you still need assistance with this?

Nokia prime place in the service can not change th...

nokia prime place in the service can not change the company's address. How can this be possible???? I received a reply from Nokia that I need to first go to here.com, look for my company and my company COMPLETELY removed. Then, to create a company AGAIN!? And wait 2-6 WEEKS backup postcards so I can verify the company that it appears Nokia's map service!! **bleep**??! Again, what's the point? Companies are changing in the same way as people exchange phone numbers!

I manage to fix it
by format my iPhone (General -> Erase All Content and Settings) and restore from backup.
After the restore the name was updated to my real name.
! don't forgget to do a backup for all your apps data and your photos !

The project was not built since its build path is incomplete

Hi, Recently I port my project fro bea 8.1 to 10.2 & I am ubale to find following packages... workspace studio alos not able to find teh librraies contabing those files.
The project was not built since its build path is incomplete. Cannot find the class file for weblogic.management.ManagementException. Fix the build path then try building this project
The project was not built since its build path is incomplete. Cannot find the class file for weblogic.security.service.ResourceBase. Fix the build path then try building this project
com.bea.p13n.mbeans.MailServiceMBean
-KASH

It seems this occurs since the required jar files for building the files is not available in the IDE build path.
The build classpath is the path which is used to find classes that are referenced by your source code. During compilation, this path is used to search for classes outside of your project. As you know th build classpath can be specified for each project. In the project properties, it is referred to as the "Java Build Path Adding a JAR file to the build path : You can add a JAR file stored either in the workbench or anywhere in your file system to the build class path. To add a JAR to your build class path follow these steps: 1>>Select the project, and from its pop-up menu, select Properties. In the Properties dialog,select the Java Build Path page. 2>>Click the Libraries tab. You can now either add a JAR file which is contained in your workspace or which is somewhere else: to add a JAR file which is inside your workspace click the Add JARs button to add an external JAR file click the Add External JARs button.

Error 2186: The service is not responding to the control function

Every time I start the Messaging Server I get an error message. The server
is running and no event log errors are reported. I see:

Could not start the <%hostname%> on <%computername%>.
Error 2186: The service is not responding to the control function.

This occurs because the system does not have enough remaining memory to
create a new desktop heap for the service being started.

The limit can be raised, but doing so requires changing registry entries to
allow more but smaller desktop heaps for Windows NT services.
The best solution is to limit the application connector instances to seven
or less.

For instance, you may make a change from 0 (zero) to 1 (one):

HKEY_LOCAL_MACHINE
SYSTEM
ControlSet001
Control
Session Manage
HeapDeCommitTotalFreeThreshold

Or press Ctrl-F to find "heap".

Nvd,
I'm sorry to hear about the problems that you are running into with your DAQCard. I can understand your frustration with the errors that you are seeing. You mention that you have tried to do some troubleshooting, I was wondering if you have tried all the troubleshooting techniques listed in this KnowledgeBase:
http://digital.ni.com/public.nsf/websearch/DCFCDB240788F8D486256D6A00834D80?OpenDocument
If you have tried all of those things, I would suggest one additional thing to try. I would suggest updating your NI-DAQ drivers to version 7.0. These drivers are the newest versions of our Data Acquisition Drivers, and can be downloaded from our website here:
http://digital.ni.com/softlib.nsf/webcategories/85256410006C055586256BBB002C128D?OpenDocument&
node=132060_US
If you have tried all of the above troubleshooting options, please post a detailed description of what you have tried. This may help to clarify what is going wrong.
Jed R.
Applications Engineer
National Instruments

Biller Direct Error "We regret the service is not currently available"

Hi,
We have installed Biller Direct software (604 SP10) on our Java server (701 SP8) and it is connected to R/3 backend system (702 SP5). After Biller Direct software installation, we ran the following steps
1. Login to biller direct url
2. Leave blank in all fields (Customer No, Name and City) then click Find Customer
3. It lists few customers list, then when we click any of description for CustomerNo it displayed the following error.
"We regret the service is not currently available. Please try again later."
In the default traces we have seen the following error details:
#1.#1E99367F6302001B00000000000DF0D20004B38BAD09A298#1323312391758#com.sap.fin.webbase.framework.RequestProcessor#sap.com/fscm~bd#com.sap.fin.webbase.framework.RequestProcessor.processRequest#USER1#10588##n/a##775189f4214611e193e400000053dbc6#SAPEngine_Application_Thread[impl:3]_15##0#0#Error##Java###No screen-name mapped! path= ;result=#2#/startEBPP#customerSearch#
Could some one please advise what could be issue? Please let me know how to fix the issue, if you already went through the above error.
Thanks in advance.
Regads
Sri

Hi Sri
Please logoff the system and restart the system again and then check.Also check what is the CRM package that you are using.Check wheather CRM 4.0 60.2.3 package is there or not.
The following tables should be configured,or you will get this sort of errors.This configuration should be done in the backend by FI
-> BCONTCD
-> BCONTT
-> BCONTA
-> TFKEBP
Regards
Srinaath

OSB11134:the service is not testable since all its operations require Java

Similar Messages

Maybe you are looking for