Is it neccesary certificate&ACL data to use functions in R3 via the RFC?
Hi.
I create sap r3 471 ides version.
And try to connect via the iway(third party product to call function via the RFC).
I referenced some block, and they says if I want to call functions in sap r3 471 via the RFC, I should check create remote function enabled option.
But i'm confusing is functions in r3 can be called from third party via the RFC directly? and have no other configuration?
If there needs to more configuration, which configuration need I check?
Which role need I add, and how to add?
When I try to connect r3, it says ID and password not correct, but I can connect to R3 with SAP GUI 6.20 well.
And I use Tcode STRUSTSSO2, found certificate, ACL are blank.
If certificate and ACL are not neccesary,could you help me to solve this problem?
If the certificate and ACL are neccesary, which parameter need I configure to call functions in sap r3 4.71 ides via the RFC?
Thanks.
Edited by: sckim805 on Apr 4, 2010 9:12 PM
got answer from another block.
Similar Messages
-
Is it neccesary using certificate matrix data to use functions in R3?
Hi.
I create sap r3 471 ides version.
And try to connect via the iway(third party product to call function via the RFC).
When I try to connect r3, it says ID and password not correct.
And I use Tcode STRUSTSSO2, found certificate, ACL are blank.
If certificate and matrix are not neccesary,could you help me to solve this problem?
If the certificate and matrix are neccesary, which parameter need I configure to call functions in sap r3 4.71 ides via the RFC?
Thanks.Hi,
I don't have knowledge about this third party software, but what my knowledge say is there must be proper mapping with SAP id and external ID. -
Hi,
We have a requirement to create a BI report based on plant maintenance report. The plant maintenance report is based on a ABAP program with complex logic. My question is i want create a Generic Datasource using Function module and can I include the logic(Abap Program) that is used for plant maintenance report in the function module? Please share your thoughts.
Thanks,
RaviHi,
Step1-Create a table structure which you need to create same as the fields you require in you data source.
Step 2-create a custom abap program and inside that call the Client abap program with the selections as required and save the result data in some table
Step 3-create infoset query.In the infoset query give your table structure name and program name which you developed.
Step4-create data source on top of that query -
How to extract data by using function module in generic extraction please
how to extract data by using function module in generic extraction please give me steps required
Dear Deba,
Generic Extraction via Function Module
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
If the requirement is like extracting data from multiple tables with some complex logic then views cannot be used..so u cna go for FM is used where it can be achieved.
Chk these
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33
check the following thread
generic extraction with function module
Generic Extraction with function module
Regards,
Ram. -
Delta Problem while extracting the data by using function module
Hi Experts,
I have extracted the data by using Function module, for delta loads I have given Calday and additive delta in Generic delta settings, in BW side I have initialized the data after that I have given delta update option in infopackage and I made process chain also, every day process chain is running successfully but it is showing zero records, but there is a data in Data source (RSA3), means delta is not working.
What is the problem,
Is there any another settings for delta loads,
Please help me to do this,
Helpful answer will be appreciated with points,
Regards,
VenkatHi,
Try this delta type :NEW STATUS FOR CHANGED RECORDS.
More information from Nagesh, this information may help
1. New status for changed Records.
2. Additive delta.
New status for changed records means
New Order
order no quantity
1000 10
order changed to quntity 8. then 2 records will posted 2 BW in first case.
1000 -10
1000 8
if you come to Additve delta.
for the same case it will send the same record as
1000 10
changed records
1000 -2
this is the difference. New status with changed records should be used only in association with ODS not cube becoz we don't have overwrite option.
Additive delta we can use for ODS and Cubes with update mode Addition.
Regards,
Satya -
HT201270 Is the iphone 4s capable of data tranfers using 4g or is 3g the only option?
Is the iphone 4s capable of data transfers using 4g or is 3g the only option with this phone?
The iPhone 4S supports HSPA+, which is defined as "4G" by the ITU. It does NOT support LTE as it lacks the hardware to connect to an LTE network.
-
How to extract the data by using function module?
hi experts,
what are the steps i have to fallow to extract the data from R/3 by using FUNCTION MODULE.
thanks & regards
venkatHi,
Extracting data from R/3 extract structure thru function modules
You can proceed with create function module using SE37, thereu2019s sample in system RSAX_BIW_GET_DATA_SIMPLE,
You need to know the logic how to populate the structure,
after that RSO2, create datasource specify extract structure and
function module,
activate and replicate to bw.
Chheers
Raj -
Generic data extractor using function module
Hi All,
I want to create a generic data extractor using a function module within the BW system. i.e. the extractor will run in BW and and store the data in a cube( in BW). No R/3 is invloved. I proceeded as follows:
1. Created a structure through se11.
2. Created a function module. But while defining "E_T_DATA" in the "Tables" section of the function module, I am getting the error "TABLES parameters are obsolete". I defined as follows:
E_T_DATA TYPE ZBW_EXTRACT
ZBW_EXTRACT is the name of the structure.
What should i do in this case ?
Thanks,
SatyaHi,
I went to se80. Copied the function module "RSAX_BIW_GET_DATA_SIMPLE" to my function group. When i tried to change the associated type from "SFLIGHT" to my own structure, it again gives a warning that "TABLES parameters are obsolete!". It does not allow me to either save, check or activate the function module. What should i do ?
Please reply urgently.
Thanks,
Satya -
R/3 Master Data Extraction Using Function Module
Hi Experts,
Could you please let me know why & How (Detail procedure) to extract R/3 master data using function module.
My team manager asked me to extract master data from R/3 for 3 more attributes of info object '0material' which is already defined as data target.
I would like to know why they are extracting data using function module
ThanksThe steps for creating extractor using Function Module. I
1. Create new Function group (if you have already not done so) in Se80
2. Copy Function module "RSAX_BIW_GET_DATA_SIMPLE" with suitable name.
3. Change the code that populate data.
Following table may give you the guideline for parameters.
Parameter Description
I_REQUNR (import) BW provides this request identifier. It is a system-generated identifier in the form REQU_XXXXXX. BW uses this same identifier in all function module calls that relate to a single load.
I_DSOURCE (import) The name of the generic extractor
I_MAXSIZE (import) The maximum number of records that BW expects to be in each data packet
I_INITFLAG (import) A Boolean flag that indicates if this is the initialization (first) call to the function module
I_READ_ONLY (import) A test flag not needed in most extraction scenarios
I_T_SELECT (table) This table holds any selections from the BW InfoPackage. The function module should examine these selections and only return data that matches the selections.
I_T_FIELD (table) This table holds the fields that BW requests
E_T_DATA (table) The function module fills this table with data records. These records then return to BW as data packets. This table has the same structure as the extract structure defined in the generic DataSource.
NO_MORE_DATA (exception) The function module raises this exception when no more data is available
ERROR_PASSED_TO_MESS_HANDLER (exception) The function module raises this exception if an error occurred during the extraction. It alerts BW to check for error logs.
Change following code to put the selection fields
Select ranges
RANGES: L_R_CARRID FOR SFLIGHT-CARRID,
L_R_CONNID FOR SFLIGHT-CONNID.
Change following to populate data
OPEN CURSOR WITH HOLD S_CURSOR FOR
SELECT (S_S_IF-T_FIELDS) FROM SFLIGHT
WHERE CARRID IN L_R_CARRID AND
CONNID IN L_R_CONNID.
ENDIF. "First data package ?
Fetch records into interface table.
named E_T_'Name of extract structure'.
FETCH NEXT CURSOR S_CURSOR
APPENDING CORRESPONDING FIELDS
OF TABLE E_T_DATA
PACKAGE SIZE S_S_IF-MAXSIZE.
below links
Re: functionmodule
Re: FM for G. extractor
***Assign points if it helps.**
Regards
CSM Reddy -
Using function 'read_text' to get the Material PO Text in Purchase Order
Hello,
i am using this function READ_TEXT to get the Material PO Text of a PO.
concatenate ekko-ebeln ekpo-EBELP into txt.
CALL FUNCTION 'READ_TEXT' " FM Read_text
EXPORTING
ID = 'F03'
LANGUAGE = 'E'
NAME = txt
OBJECT = 'EKPO'
TABLES
LINES = itab
EXCEPTIONS
ID = 1.
Now if i enter the Mat PO Text, the function works fine. But if i dont enter the Mat PO Text, the prog gives a dialog box error at compilation that ,
<b>Text 450000001800010 ID F03 language EN not found</b>, where '450000001800010' is the value of 'txt'(passed to the function).
how to check for invalid text name returning from the function ????
Thanks for yur time.hi
use the select query from STXH to c if the text exists and pass the same value as what u r doing to read_text and if the sy-subrc = 0...then only use the FM ...hope it helps..
reward points if it help...
regards
Gunjan -
Data extraction using Function Midule
Dear Experts,
Previously we had a FM to extract data from an ODS into a csv file.
Now we want to extract data from an infocube using a similar method (to save into a csv file again.)
BEFORE we were extracting from ODS transparent table /BIC/AYPU_O1140.
Now I want to extract from the infocube 0CCA_C11.
So I thought I should use /BIC/F0CCA_C11.
But actually the fields are not there. Only dimensions keys are mentionned.
Example:
I want the value type 0vtype, the infoobject is in one of the dimensions of 0CCA_C11.
But in F0CCA_C11, there is only a field KEY_0CCA_C113...
So my question is : were is the data ?
For vtype (dim13) should it be in /BI0/D0CCA_C113 table
And what about navigational attributes (like 0profit_ctr) or KF (like 0mount)?
How can I extract them? Were is the active data stored?
I'm looking froward to reading your suggestions.
Kind regards,
AliceHi,
search the forum for 'star schema' for understanding the set up of cube/dimension/sid tables....
to read the data in the cube you need to use a FM 'RSDRI_INFOPROV_READ'...read the below thread for more info/links
RSDRI_INFOPROV_READ?
M. -
HT201415 Cellular data doesn't function unless I restart the new iPad!
Whenever I turn away from a wifi spot and try to use my sim for Internet (I 've monthly 2 giga data plan), my new iPad just doesn't recognize the service untell I restart it! This process (transfere from sim to wifi and vice versa) should be automatic, isn't it.
Any idea or help would be appreciated..Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best. -
Can I use two gmail addresses via the same Mail account?
Please help! My brain is fried. I have two email addresses: one is a regular gmail one, the other uses my own domain but it's gmail too. I currently have both set up on Mail on my Mac. I receive and send from both. But I really want to have both working through one account (this is mainly to simplify the very clever Sanebox tool on both my Mac and in the Mailbox app on my iPhone).
If I forward my domain email to my regular gmail then I can receive them all in one fell swoop. Which is fine. But can I then continue to send from both accounts? Is this what they mean by an 'alias'? It's really important that I can send from both.
Sanebox suggested this: http://support.apple.com/kb/TA23485. I'm not sure I really understand it and don't want to risk changing my settings yet in case it all goes wrong.
Thank you very much!If you're asking whether you can connect one device to two itunes store accounts, the answer is no.
-
I am using exchange2003 on iPad and iPhone. Is it possible to use same agenda and contacts on iMac 10.7.2?
Hi jeris529,
As Niel has suggested, you should not use a non standard disk in your slot loading iMac.
Further information about disk compatibility or usage can be found in the Apple Knowledge Base Article "Using nonstandard discs in optical drives".
hope that helps some,
littleshoulders -
my i mac isnt finding my sd card, when i use the slot or even when I use usb port via card rader. I have tried on anothe r machine and it works fine. can you help?
thanksFirst thing to check if go to Finder Menu/Preferences/General
Make sure External disks is checked
Maybe you are looking for
-
Oam11g and oim 9.1.0.2 SSO
anyone done sso with oam11g and oim 9.1.0.2? I seem to be having issue where OAM11g sessions and header variables not getting over.
-
Today I was moving applications and other files from a portable hard drive onto my new mac. I was moving a large group of files (75 gigs) when finder suddenly quit half way through and went into a loop between a gray screen and my desktop. I tried to
-
As a long-standing shareholder in and business customer of BT,I am appalled by the way in which Plusnet,owned by us shareholders in BT, is being handled . BT is giving the impression of being technically incompetent-we have suddenly found out that in
-
I have a 2006 Mac Desktop computer with the CS3 suite on it. I still have the discs for the suite and would like to move it over to my macbook air. I tried to just copy the Photoshop file, but that didn't work. Is there an easy way to migrate these
-
Compressing HDV footage to download ond the web
Hi, I just finished putting together a simple HD music video for my brother's band. What I want to do next is to compress it using H.264 in compressor 2 to make a full res 1920x1080 video much like what is on the Quicktime movie trailer site. I have