Is it posible to find out the billing date of any sales order..?

Hi all,
Is it posible to find out the billing date of any sales order..?
If it is posible tell me how to do.
Thanks

Hi ,
Can you explain more on this.
I think you want to know billing date for the sales order. Here the billing is already done.
If so , go to vbfa table and then give the sales order number in VBELV field. You will get many records. But VBTYP_N give as M ( Invoice ) and find out the document number and then pass it in billing table VBRK and get the date of creation.
If it is like proposed date while creating the sales order ,
then i am not sure about it.
Regards,
Venkatesh

Similar Messages

How to find out the Accounting document status for sales order

Hi
We have created the sales document by referring the billing document of contract no.Aftre that we have raised invoice for sales document. Now system is generated both invoice , accounting document and the value is appearing against the invoice document. However the status against the accounting document is showing as not cleared. I want to know where we could see this status in Table,
Normally we can see the status in FPLT for contracts since its having the billing plan no. Suppose if the billing plan is not available like S.O , How to check the status in table?
I have refered so many tables but not helping. Since i want to get the uncleared value of accouting document.
Please help me.
Regards
Thenna

Hi Thenna
The accounting document status in the document flow is determined dynamically when you display the document flow,
it's not saved in a specific table.
Here is the relevant logic:
LV05CF01 -> form BUCHHALTUNGSBELEG
IF vbrk-vbeln <> vbfa_tab-vbeln.
   PERFORM vbrk_ermitteln USING vbfa_tab-vbeln.
   REFRESH xbkpf.
   CALL FUNCTION 'FI_DOCUMENT_READ'
    LOOP AT xbseg WHERE bukrs EQ xbkpf-bukrs
                  AND   belnr EQ xbkpf-belnr
                  AND   gjahr EQ xbkpf-gjahr
                  AND   ( koart EQ 'D' OR koart EQ 'K' ).
    ENDLOOP.
            IF NOT sy-subrc IS INITIAL.
SET STATUS TO 'No items are cleared'
              l_xdoc_num-status = 'A'. <<<
            ELSE.
              LOOP AT xbseg WHERE augbl IS initial
                            AND   umskz NE 'A'
                            AND   vorgn NE 'AZUM'
                            AND   ( koart EQ 'D' OR koart EQ 'K' ).
              ENDLOOP.
              IF NOT sy-subrc IS INITIAL.
Set status to 'All items are cleared'
                l_xdoc_num-status = 'C'. <<<
              ENDIF.
            ENDIF.
Regards,
Alex

How to find out the invoice value from a sales order

Hi All,
Please can any one hlpe to solve the beloq query.
Is there any report in SAP , which give you the following.
Sales order , Total cost incurred , Total revenue recoganised , Total Invoiced , Total collected .
Thanks ,
Rajesh

Dear Waman,
Thanks a lot for your replay ..
But i don't have much knowldge about KE 30 report , is there any study meterial available online to configure this \ or study this report .

How do i find out the tables (data)effected in a schema after a particular time stamp

how do i find out the tables (data not structure)effected in a schema after a particular time stamp?
pls email in [email protected]

You can't do that. That would be a real security risc.
/KAj

How to find out the "manufacture date"?

Hello!
Can you tell me how to find out the manufacture date of my Satellite A110-334 with the serial "SY6224123K"?
I need this information for my insurance!
I found only this link for HDD`s: http://www.storage.toshiba.eu/index_manual.php?pid=220&sid=536&la=en
But there is no "S" on the first digit!??
So it is maybe "Y6" which can be November 2006! Is this right?
Thank you!
===========
This is the information on the link above:
How to encode a Toshiba Hard Disk Drive Serial Number?
The Toshiba serial number (S/N) includes details of the date of manufacture. The first digit of the serial number indicates the Month of manufacture and the 2nd digit indicates the Year.
Example:
M Y x x x x x x x
M = Month
Y = Year
The month digit goes from 1, for January, through to 9, for September, and then X, Y and Z, for October, November and December.
Examples:
2 8 1 7 0 0 0 1 A
2 = February
8 = 1998
3 0 5 4 4 3 0 6 T
3 = March
0 = 2000
X 9 D 7 8 3 3 1 T
X = October
9 = 1999
The remaining digits contain information about factory and production line, and some digits are reserved for a continuously running serial number.

Hello
Try with http://gedb.toshiba.com/
Let me know if you find info you need.

How to find out the Hire date of an employee?

Hi All
What is effective date, Latest start date and other date fields which are are used when we create a new employee?
What is the difference between hire date and joining date?
How to find out the Hire date and joining date of an employee?
Regards
Rahman

The effective dates are related to date tracking. The effective start date shows when this version of the record became effective.
The Hire Date, or Latest Satrt Date shows the date on which the employee was last hired. If he was hired before from 01/01/01 to 31/12/01, then left but was hired again from 01/01/07, the Latest Hired Date would be 01/01/07 and the First Hired Date would be 01/01/01.
When using Oracle HR, datetracking allows you to either correct data (because it was wrong or incomplete), or update it (because a time effective change took place e.g. got married).
The[b] effective dates show when a record was updated. So, if an update was made on 07/02/07, and the update datetrack option was used, the current record would have its effective end date set to 06/02/07 (the day before the update) and a new version would be created with the updates and an effective start date of 07/02/07.
Hope this helps.

How to find out the Release date & Release code of PO's ?

Dear All,
Is there any standard reports available to find out the Release date & Release codes of PO's which are already released & the PO's which are pending for release ?
Regards,

HI All,
Thanks a lot for your response.
In ME2N,ME2M etc..I have to select each single PO line item & then have to go to Header Changes to find out this info.
So, Is it possible to find out the release codes/release date of all the PO's in a single shot?
Hope my query is clear.
Thanks & Regards,

How to find out the last date & time on which a program has been run

Hi Experts,
Can anybody tell how to find out the last date on which a purticular program has been run.
Valuable answers will be rewarded.
Thanks & Regards,
Satish.

Hi!
Try STAD transaction. Unfortunately it contains a huge amount of data, so it is available only for a few days backwards... Maybe some weeks, but you can't make yearly reports from its data... So it's not useful to see, which program is in use or not...
I planned once to download it weekly, but it was not so important...
Regards
Tamá

How do I find out the purchase date of my MacBook Air?

I need to find out the purchase date of my MacBook Air so I can register it as a product in my Apple ID. I bought the MacBook from a friend, and he doesn't remember the date it was purchased on.

Giving away / Selling your Mac / Resetting the computer to the factory condition
http://support.apple.com/kb/HT5189
http://www.thesafemac.com/how-to-prepare-your-mac-for-sale/

How do i find out the purchase date and my coverage plan?

how can i find out the purchase date and my coverage plan on my ipad?

Try here for the warranty coverage. Your date of purchase would be tied to wherever you bought the device.
https://supportprofile.apple.com/

How to find out the table, data for the IDOCS is pulled from?

HI
The ZFPH9999397 VENDOR FEED job runs the RBDMIDOC program with the variant Z9999_397. This creates IDOCS that are sent out and eventually wind up in IMOS.
The IDOC Type is CREMAS.
Can you tell me which table or tables the data for these IDOCS is pulled from?
Or tell me the procedure to find out the table name.
Thanks,
das.
Edited by: sathish dasari on Dec 10, 2009 11:54 AM

You can use Transp. Table      TBD62 .
enter Message Type                      CREMAS
you will get the list of tables and the fields from which data is pulled based on the change pointers in Transp. Table      BDCP.

How to find out the aligning Data dictionary table for a structure.

Hi
As the table controls are associated with strucures, the data input goes to the data dictionary table aligned to that structure. Is there any way we can find out the table related to that particular structure ?
Thanks,
Dhareppa

Hi,
The structure and its fields may be associated with multiple database tables.
You can try by where-used list of the structure/field and then you can look and determine the table by hit and try method.
Also as suggested above you can try get the SQL trace and then ypu can look for table associated behind the structure/fields I believe this is the best way to find the DB table.
Thanks,
Ravi

Third Party process - billing date change in Sales order / Customer Invoice

Dear Friends,
In Third Party Sales Process , as we are aware billing is order related billing and it will become due only after vendor invoice is received.
               My situation is in the original sales order billing date is eg: 01.02.2009 . The subsequent vendor invoice ( Invoice receipt done based on PR --> and PO) has a later date eg: 05.02.2009 .
This means that the customer biling can be done only after this date.
How the system behaves in this case wrt to the billing date ( 01/02/2009) of the original sales order.
Regards
Mahesh
Edited by: Mahesh sap on Feb 4, 2009 8:55 AM

Hi all ,
         Thanx all for your responses . But my case is a bit peculiar . Here the vendor invoice is coming by IDoc through EDI . When EDI flow is confirmed, the billing date is pushed ahead. As per billing calendar in CMR the customer can be invoiced only on the last date of the month.
As a result if the original billing date in the sales order is Feb end, when vendor invoice received through EDI , the billing date is shifting to march end .
Is it because the date of vendor invoice is causing this? Obviously the customer billing date falls only after vendor invoice date.
Regards
Mahesh

Billing date(fkdat) in sales order item is not copied from Goods Issue Date

Hi All
we are facing problem at item level billing date field.This field should be filled with the GI Date in schedule lines shipping tab.
but, it(billing date) is not being filled with goods issue date but, with the required deliver date at sales order header.
Please give me a solution and the root cause. This is urgent as business is halted.
Thanks
Kumar

Lakshmipati
This is from SAP Screen
"If invoice dates are defined for the customer, the system proposes the billing date from the invoice date calendar. If no invoice dates are agreed, then the actual goods issue date is formed on the basis of delivery related billing. In order related billing, the billing date of the order forms the basis of the billing date."
earlier it is happening as desired.i.e., billing date=GI Date.
but, as of now it is taken from the required delivery date.
Please give me solution
Kumar

How to find out the orizinal table for any wiew

I have a maintaince view (name of the view is V_T001K_ASSIGNV) so i cant make a selection quarry on that view as it is maintaince view. is thare any table in sap for for a particular maintaince view and what is the way to find out that table for that view so i can make a quarry.

Go to SE11 ---> display the view, there right side you will find tables related to that view, based on your requiremnt take the table,
Regards,
Mallik.

Is it posible to find out the billing date of any sales order..?

Similar Messages

Maybe you are looking for