Is it possible for the test equip. to tell me the measured data is ready?

When programming to read from a test equipment (e.g. ocsilloscope)
connected to PC/GPIB, many times I have to set a delay before reading
the value, otherwise the return value will be some invalid numbers
(e.g., 0). To achieve valid test results and testing time reduction, I
used trial-and-error to get a "minimum" delay time. But even this
delay time which works for one equipment may not work for another.
It's such a headache!!!
Is it possible to poll/inquire the status of the test equipment in the
program if the measured data is ready? If yes, how?
Thanks a lot for your answer!

If you are programming using VISA, the following link takes you to some examples of waiting until the instrument has data available. The example link also includes other examples of synchronizing your application with your instrument.
Using Instrument Status Registers with Service Requests and Polling

Similar Messages

Posting is not possible for the specified company code.

Hi SRM Gurus,
We have a four company codes in our org.structure and if we try to post manual invoice for a particular company code with its currency, we are getting this error :
"Posting is not possible for the specified company code "
We have all company codes defined and inherited for the particular user in BUK and we get all the company codes in the F4 help of this user in BBPIV02 -->Basic data.
Any suggestions pl.
I doubt this particular Cocode is deactivated for invoice posting in backend. Is it possible ?
Kindly suggest.
Reg.,
Sridhar.

Hi
Which SRM version are you using ?
Are you getting this error for a praticular company code only or for all the comapny codes ?
<b>Please read this -></b>
Since you are trying to create Invoice with PO did you check the Vendor Root there is a attribute for company code. Please maintain the same, if not maintained.
Refer the link below for details.
Re: Company code for system missing in user attributes
<u>Other related links -></u>
Try to change the chart of acct info in OBY6 for a company code that was copied from SAP template, there is no Financial posting or any other posting in this company code.
Re: Posting Period Error in Confirmation
Hope this will help.
Regards
- Atul

No goods receipt possible for the PO - Interesting issue

HI all,
I need to do the GR for an open inbound delivery. At the item level of precessing document i.e PO 'No goods receipt' check is marked. Same thing is copied to my inbound delivery 'No goods Movement' is marked in Adminstrative tab of my inbound delivery item.
When I use the BAPI BAPI_GOODSMVT_CREATE to do GR for this Inbound delivery, it throws an error saying that 'No goods receipt possible for the PO item'.
But when I do the same thing manually it happened successfully by creating a "service confirmation document" and changed the goods movement status as C (fully completed) without creating an material document as these items are no relevant items for goods movement.
As we are moving goods directly from Vendor to customer, just we want to do service confirmation to vendor without any goods movement. It happening manually but not through BAPI. Please suggest.
Helpful anwers are certainly rewared
Thanks,
Raggs.

Hi AP,
I didn't find any relevant FM to do the same.
Thanks.

Is it possible for the Adobe to put video instructions on these following things as my professor works on CS4 and I have CS6,it is really confusing for me to follow the disparitie between the two.

Is it possible for the Adobe to put video instructions on these following things as my professor works on CS4 and I have CS6,it is really confusing for me to follow the disparitie between the two
Modifying the header
Changing page background color
Changing sidebars in CSS
Adding/changing a Spry link's background and hover colors in navbar
Formatting headers in split view
Deleting placeholder copy in the content container
Inserting a video in a table
Changing table background color
Formatting text in the content container
Format hyperlinks in CSS
Insert page anchors and link to them with navbar hyperlinks
Enter text in footer with a hyperlink
Insert and format headers
Use of a color picker (Color Cop)

Use CS6 Help (F1). Those are the most up to date articles for your product version.
<Changing page background color>
We've already told you how to do that with CSS code.
<Deleting placeholder copy in the content container>
Placeholders are deprecated. Adobe removed them.
<Inserting a video in a table>
Insert > Media > HTML5 Video
<Insert page anchors and link to them with navbar hyperlinks>
Named anchors are deprecated in HTML. Adobe removed them from DW. Use Div IDs instead.
Why are you taking a course that teaches outdated methods in CS4 which is no longer supported?
Nancy O.

Is it possible for the next IOS 6 update for the music album art to display on the homescreen as a backround image when music is playing?

Is it possible for the next IOS 6 update for the music album art to display on the homescreen as a backround image when music is playing?

It does, under certain circumstances. If you are playing music and lock the phone or it locks on its own, when you wake it up, the album art will show. It also shows as the background if you are in the music app. If this is not exactly what you are looking for, you can submit feedback to Apple about this feature at www.apple.com/feedback.

How do you shadow a phone and is it possible for the person your shadowing to be able to tell?

How do you shadow your phone and is it possible for the person you are shadowing to tell?

Shadow? Are you referring to tracking the phone? If it is your phone, how are you tracking it? Are you talking about a stolen device?

Is it possible for the Touch to work with Airport and play music wirelessly

Is it possible for the Touch to transmit music via the Airport Extreme to my Hi Fi?

No. But you can use it as a remote control for a current Mac - AirTunes -Airport Express setup with Remote Buddy (link).
The Airport Extreme Base Station doesn't have an audio facility:
http://www.ifelix.co.uk/tech/1301.html
regards
mrtotes
Message was edited by: mrtotes: Thanks Deggie!!! Must concentrate more and not have so many tabs open! RSully. When you car has stopped moving you keep it that way using a....
Message was edited by: mrtotes

Is it possible for the posting COGS another price then standard price

< MODERATOR: Message locked. Please post this message in the [Controlling forum|SAP ERP Financials - Controlling;. >
Is it possible for the posting of the goods sold (delivery sales order) to use another price then the standard price when the price control of the material is S.

Yes. Is it a third-party scenario?
In a typical Third-Party sale (where the vendor delivers the goods directly to the customer, with no/notional GR in our books), the system uses the PO price and not the Std Price from MM.
Cheers.

There is a possibility for the iphone 5 block to the receiving sms from a particular nr?

there is a possibility for the iphone 5 block to the receiving sms from a particular nr?

First of all Tranks for your fast answer. My Provider isn't able to stop this ( DE ). Is there an App which can stop theese ?
I trieb Blackouts, but it doesn't work in the Way i want

HT2479 In iMovie is it possible for the music track to run longer than the video?

In iMovie is it possible for the music track to run longer than the video? e.g. for there to be a short video clip playing during the intro to the song and then the song to continue to play in full once the video has finished?

Yes. Just drag your music in from iTunes or wherever and the timeline will auto increase to the full length of the music track. Like this:

CBO generating different plans for the same data in similar Environments

Hi All
I have been trying to compare an SQL from 2 different but similar environments build of the same hardware specs .The issue I am facing is environment A, the query executes in less than 2 minutes with plan mostly showing full table scans and hash join whereas in environment B(problematic), it times out after 2 hours with an error of unable to extend table space . The statistics are up to date in both environments for both tables and indexes . System parameters are exactly similar(default oracle for except for multiblock_read_count ).
Both Environment have same db parameter for db_file_multiblock_read_count(16), optimizer(refer below),hash_area_size (131072),pga_aggregate_target(1G),db_block_size(8192) etc . SREADTIM, MREADTIM, CPUSPEED, MBRC are all null in aux_stats in both environment because workload was never collected i believe.
Attached is details about the SQL with table stats, SQL and index stats my main concern is CBO generating different plans for the similar data and statistics and same hardware and software specs. Is there any thing else I should consider .I generally see environment B being very slow and always plans tend to nested loops and index scan whereas what we really need is a sensible FTS in many cases. One of the very surprising thing is METER_CONFIG_HEADER below which has just 80 blocks of data is being asked for index scan.
show parameter optimizer
optimizer_dynamic_sampling integer 2
optimizer_features_enable string 10.2.0.4
optimizer_index_caching integer 0
optimizer_index_cost_adj integer 100
optimizer_mode string ALL_ROWS
optimizer_secure_view_merging boolean TRUE
**Environment**
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE     10.2.0.4.0     Production
TNS for Solaris: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
Note: : There are slight difference in the no of records in the attached sheet.However, I wanted to tell that i have tested with exact same data and was getting similar results but I couldn't retain the data untill collecting the details in the attachment
TEST1     COMPARE TABLE LEVE STATS used by CBO
ENVIRONMENT A
TABLE_NAME     NUM_ROWS     BLOCKS     LAST_ANALYZED
ASSET     3607425     167760     5/02/2013 22:11
METER_CONFIG_HEADER     3658     80     5/01/2013 0:07
METER_CONFIG_ITEM     32310     496     5/01/2013 0:07
NMI     1899024     33557     18/02/2013 10:55
REGISTER     4830153     101504     18/02/2013 9:57
SDP_LOGICAL_ASSET     1607456     19137     18/02/2013 15:48
SDP_LOGICAL_REGISTER     5110781     78691     18/02/2013 9:56
SERVICE_DELIVERY_POINT     1425890     42468     18/02/2013 13:54
ENVIRONMENT B
TABLE_NAME     NUM_ROWS     BLOCKS     LAST_ANALYZED
ASSET     4133939     198570     16/02/2013 10:02
METER_CONFIG_HEADER     3779     80     16/02/2013 10:55
METER_CONFIG_ITEM     33720     510     16/02/2013 10:55
NMI     1969000     33113     16/02/2013 10:58
REGISTER     5837874     120104     16/02/2013 11:05
SDP_LOGICAL_ASSET     1788152     22325     16/02/2013 11:06
SDP_LOGICAL_REGISTER     6101934     91088     16/02/2013 11:07
SERVICE_DELIVERY_POINT     1447589     43804     16/02/2013 11:11
TEST ITEM 2     COMPARE INDEX STATS used by CBO
ENVIRONMENT A
TABLE_NAME     INDEX_NAME     UNIQUENESS     BLEVEL     LEAF_BLOCKS     DISTINCT_KEYS     AVG_LEAF_BLOCKS_PER_KEY     AVG_DATA_BLOCKS_PER_KEY     CLUSTERING_FACTOR     NUM_ROWS
ASSET     IDX_AST_DEVICE_CATEGORY_SK     NONUNIQUE     2     9878     67     147     12982     869801     3553095
ASSET     IDX_A_SAPINTLOGDEV_SK     NONUNIQUE     2     7291     2747     2     639     1755977     3597916
ASSET     SYS_C00102592     UNIQUE     2     12488     3733831     1     1     3726639     3733831
METER_CONFIG_HEADER     SYS_C0092052     UNIQUE     1     12     3670     1     1     3590     3670
METER_CONFIG_ITEM     SYS_C0092074     UNIQUE     1     104     32310     1     1     32132     32310
NMI     IDX_NMI_ID     NONUNIQUE     2     6298     844853     1     2     1964769     1965029
NMI     IDX_NMI_ID_NK     NONUNIQUE     2     6701     1923072     1     1     1922831     1923084
NMI     IDX_NMI_STATS     NONUNIQUE     1     106     4     26     52     211     211
REGISTER     REG_EFFECTIVE_DTM     NONUNIQUE     2     12498     795     15     2899     2304831     4711808
REGISTER     SYS_C00102653     UNIQUE     2     16942     5065660     1     1     5056855     5065660
SDP_LOGICAL_ASSET     IDX_SLA_SAPINTLOGDEV_SK     NONUNIQUE     2     3667     1607968     1     1     1607689     1607982
SDP_LOGICAL_ASSET     IDX_SLA_SDP_SK     NONUNIQUE     2     3811     668727     1     2     1606204     1607982
SDP_LOGICAL_ASSET     SYS_C00102665     UNIQUE     2     5116     1529606     1     1     1528136     1529606
SDP_LOGICAL_REGISTER     SYS_C00102677     UNIQUE     2     17370     5193638     1     1     5193623     5193638
SERVICE_DELIVERY_POINT     IDX_SDP_NMI_SK     NONUNIQUE     2     4406     676523     1     2     1423247     1425890
SERVICE_DELIVERY_POINT     IDX_SDP_SAP_INT_NMI_SK     NONUNIQUE     2     7374     676523     1     2     1458238     1461108
SERVICE_DELIVERY_POINT     SYS_C00102687     UNIQUE     2     4737     1416207     1     1     1415022     1416207
ENVIRONMENT B
TABLE_NAME     INDEX_NAME     UNIQUENESS     BLEVEL     LEAF_BLOCKS     DISTINCT_KEYS     AVG_LEAF_BLOCKS_PER_KEY     AVG_DATA_BLOCKS_PER_KEY     CLUSTERING_FACTOR     NUM_ROWS
ASSET     IDX_AST_DEVICE_CATEGORY_SK     NONUNIQUE     2     8606     121     71     16428     1987833     4162257
ASSET     IDX_A_SAPINTLOGDEV_SK     NONUNIQUE     2     8432     1780146     1     1     2048170     4162257
ASSET     SYS_C00116157     UNIQUE     2     13597     4162263     1     1     4158759     4162263
METER_CONFIG_HEADER     SYS_C00116570     UNIQUE     1     12     3779     1     1     3734     3779
METER_CONFIG_ITEM     SYS_C00116592     UNIQUE     1     107     33720     1     1     33459     33720
NMI     IDX_NMI_ID     NONUNIQUE     2     6319     683370     1     2     1970460     1971313
NMI     IDX_NMI_ID_NK     NONUNIQUE     2     6597     1971293     1     1     1970771     1971313
NMI     IDX_NMI_STATS     NONUNIQUE     1     98     48     2     4     196     196
REGISTER     REG_EFFECTIVE_DTM     NONUNIQUE     2     15615     1273     12     2109     2685924     5886582
REGISTER     SYS_C00116748     UNIQUE     2     19533     5886582     1     1     5845565     5886582
SDP_LOGICAL_ASSET     IDX_SLA_SAPINTLOGDEV_SK     NONUNIQUE     2     4111     1795084     1     1     1758441     1795130
SDP_LOGICAL_ASSET     IDX_SLA_SDP_SK     NONUNIQUE     2     4003     674249     1     2     1787987     1795130
SDP_LOGICAL_ASSET     SYS_C004520     UNIQUE     2     5864     1795130     1     1     1782147     1795130
SDP_LOGICAL_REGISTER     SYS_C004539     UNIQUE     2     20413     6152850     1     1     6073059     6152850
SERVICE_DELIVERY_POINT     IDX_SDP_NMI_SK     NONUNIQUE     2     3227     660649     1     2     1422572     1447803
SERVICE_DELIVERY_POINT     IDX_SDP_SAP_INT_NMI_SK     NONUNIQUE     2     6399     646257     1     2     1346948     1349993
SERVICE_DELIVERY_POINT     SYS_C00128706     UNIQUE     2     4643     1447946     1     1     1442796     1447946
TEST ITEM 3     COMPARE PLANS
ENVIRONMENT A
Plan hash value: 4109575732
| Id | Operation                       | Name                   | Rows | Bytes |TempSpc| Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT                |                        |    13 | 2067 |       |   135K (2)| 00:27:05 |
|   1 | HASH UNIQUE                    |                        |    13 | 2067 |       |   135K (2)| 00:27:05 |
|* 2 |   HASH JOIN                     |                        |    13 | 2067 |       |   135K (2)| 00:27:05 |
|* 3 |    HASH JOIN                    |                        |     6 |   900 |       |   135K (2)| 00:27:04 |
|* 4 |     HASH JOIN ANTI              |                        |     1 |   137 |       |   135K (2)| 00:27:03 |
|* 5 |      TABLE ACCESS BY INDEX ROWID| NMI                    |     1 |    22 |       |     5   (0)| 00:00:01 |
|   6 |       NESTED LOOPS              |                        |     1 |   131 |       | 95137   (2)| 00:19:02 |
|* 7 |        HASH JOIN                |                        |     1 |   109 |       | 95132   (2)| 00:19:02 |
|* 8 |         TABLE ACCESS FULL       | ASSET                  | 36074 | 1021K|       | 38553   (2)| 00:07:43 |
|* 9 |         HASH JOIN               |                        | 90361 | 7059K| 4040K| 56578   (2)| 00:11:19 |
|* 10 |          HASH JOIN              |                        | 52977 | 3414K| 2248K| 50654   (2)| 00:10:08 |
|* 11 |           HASH JOIN             |                        | 39674 | 1782K|       | 40101   (2)| 00:08:02 |
|* 12 |            TABLE ACCESS FULL    | REGISTER               | 39439 | 1232K|       | 22584   (2)| 00:04:32 |
|* 13 |            TABLE ACCESS FULL    | SDP_LOGICAL_REGISTER   | 4206K|    56M|       | 17490   (2)| 00:03:30 |
|* 14 |           TABLE ACCESS FULL     | SERVICE_DELIVERY_POINT |   675K|    12M|       | 9412   (2)| 00:01:53 |
|* 15 |          TABLE ACCESS FULL      | SDP_LOGICAL_ASSET      | 1178K|    15M|       | 4262   (2)| 00:00:52 |
|* 16 |        INDEX RANGE SCAN         | IDX_NMI_ID_NK          |     2 |       |       |     2   (0)| 00:00:01 |
| 17 |      VIEW                       |                        | 39674 |   232K|       | 40101   (2)| 00:08:02 |
|* 18 |       HASH JOIN                 |                        | 39674 | 1046K|       | 40101   (2)| 00:08:02 |
|* 19 |        TABLE ACCESS FULL        | REGISTER               | 39439 |   500K|       | 22584   (2)| 00:04:32 |
|* 20 |        TABLE ACCESS FULL        | SDP_LOGICAL_REGISTER   | 4206K|    56M|       | 17490   (2)| 00:03:30 |
|* 21 |     TABLE ACCESS FULL           | METER_CONFIG_HEADER    | 3658 | 47554 |       |    19   (0)| 00:00:01 |
|* 22 |    TABLE ACCESS FULL            | METER_CONFIG_ITEM      | 7590 | 68310 |       |   112   (2)| 00:00:02 |
Predicate Information (identified by operation id):
   2 - access("METER_CONFIG_HEADER_SK"="METER_CONFIG_HEADER_SK")
   3 - access("NETWORK_TARIFF_CD"="NETWORK_TARIFF_CD")
   4 - access("SERVICE_DELIVERY_POINT_SK"="TMP"."SERVICE_DELIVERY_POINT_SK")
   5 - filter("ROW_CURRENT_IND"='Y' AND ("NMI_STATUS_CD"='A' OR "NMI_STATUS_CD"='D'))
   7 - access("ASSET_CD"="EQUIP_CD" AND "SAP_INT_LOG_DEVICE_SK"="SAP_INT_LOG_DEVICE_SK")
   8 - filter("ROW_CURRENT_IND"='Y')
   9 - access("SERVICE_DELIVERY_POINT_SK"="SERVICE_DELIVERY_POINT_SK")
10 - access("SERVICE_DELIVERY_POINT_SK"="SERVICE_DELIVERY_POINT_SK")
11 - access("SAP_INT_LOGICAL_REGISTER_SK"="SAP_INT_LOGICAL_REGISTER_SK")
12 - filter("REGISTER_TYPE_CD"='C' AND (SUBSTR("REGISTER_ID_CD",1,1)='4' OR
              SUBSTR("REGISTER_ID_CD",1,1)='5' OR SUBSTR("REGISTER_ID_CD",1,1)='6') AND "ROW_CURRENT_IND"='Y')
13 - filter("ROW_CURRENT_IND"='Y')
14 - filter("ROW_CURRENT_IND"='Y')
15 - filter("ROW_CURRENT_IND"='Y')
16 - access("NMI_SK"="NMI_SK")
18 - access("SAP_INT_LOGICAL_REGISTER_SK"="SAP_INT_LOGICAL_REGISTER_SK")
19 - filter("REGISTER_TYPE_CD"='C' AND (SUBSTR("REGISTER_ID_CD",1,1)='1' OR
              SUBSTR("REGISTER_ID_CD",1,1)='2' OR SUBSTR("REGISTER_ID_CD",1,1)='3') AND "ROW_CURRENT_IND"='Y')
20 - filter("ROW_CURRENT_IND"='Y')
21 - filter("ROW_CURRENT_IND"='Y')
22 - filter("ROW_CURRENT_IND"='Y' AND "CONROL_REGISTER"='X')
ENVIRONMENT B
Plan hash value: 2826260434
| Id | Operation                            | Name                   | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT                     |                        |     1 |   181 |   103K (2)| 00:20:47 |
|   1 | HASH UNIQUE                         |                        |     1 |   181 |   103K (2)| 00:20:47 |
|* 2 |   HASH JOIN ANTI                     |                        |     1 |   181 |   103K (2)| 00:20:47 |
|* 3 |    HASH JOIN                         |                        |     1 |   176 | 56855   (2)| 00:11:23 |
|* 4 |     HASH JOIN                        |                        |     1 |   163 | 36577   (2)| 00:07:19 |
|* 5 |      TABLE ACCESS BY INDEX ROWID     | ASSET                  |     1 |    44 |     4   (0)| 00:00:01 |
|   6 |       NESTED LOOPS                   |                        |     1 |   131 | 9834   (2)| 00:01:59 |
|   7 |        NESTED LOOPS                  |                        |     1 |    87 | 9830   (2)| 00:01:58 |
|   8 |         NESTED LOOPS                 |                        |     1 |    74 | 9825   (2)| 00:01:58 |
|* 9 |          HASH JOIN                   |                        |     1 |    52 | 9820   (2)| 00:01:58 |
|* 10 |           TABLE ACCESS BY INDEX ROWID| METER_CONFIG_HEADER    |     1 |    14 |     1   (0)| 00:00:01 |
| 11 |            NESTED LOOPS              |                        |     1 |    33 |   116   (2)| 00:00:02 |
|* 12 |             TABLE ACCESS FULL        | METER_CONFIG_ITEM      |     1 |    19 |   115   (2)| 00:00:02 |
|* 13 |             INDEX RANGE SCAN         | SYS_C00116570          |     1 |       |     1   (0)| 00:00:01 |
|* 14 |           TABLE ACCESS FULL          | SERVICE_DELIVERY_POINT |   723K|    13M| 9699   (2)| 00:01:57 |
|* 15 |          TABLE ACCESS BY INDEX ROWID | NMI                    |     1 |    22 |     5   (0)| 00:00:01 |
|* 16 |           INDEX RANGE SCAN           | IDX_NMI_ID_NK          |     2 |       |     2   (0)| 00:00:01 |
|* 17 |         TABLE ACCESS BY INDEX ROWID | SDP_LOGICAL_ASSET      |     1 |    13 |     5   (0)| 00:00:01 |
|* 18 |          INDEX RANGE SCAN            | IDX_SLA_SDP_SK         |     2 |       |     2   (0)| 00:00:01 |
|* 19 |        INDEX RANGE SCAN              | IDX_A_SAPINTLOGDEV_SK |     2 |       |     2   (0)| 00:00:01 |
|* 20 |      TABLE ACCESS FULL               | REGISTER               | 76113 | 2378K| 26743   (2)| 00:05:21 |
|* 21 |     TABLE ACCESS FULL                | SDP_LOGICAL_REGISTER   | 5095K|    63M| 20245   (2)| 00:04:03 |
| 22 |    VIEW                              |                        | 90889 |   443K| 47021   (2)| 00:09:25 |
|* 23 |     HASH JOIN                        |                        | 90889 | 2307K| 47021   (2)| 00:09:25 |
|* 24 |      TABLE ACCESS FULL               | REGISTER               | 76113 |   966K| 26743   (2)| 00:05:21 |
|* 25 |      TABLE ACCESS FULL               | SDP_LOGICAL_REGISTER   | 5095K|    63M| 20245   (2)| 00:04:03 |
Predicate Information (identified by operation id):
   2 - access("SERVICE_DELIVERY_POINT_SK"="TMP"."SERVICE_DELIVERY_POINT_SK")
   3 - access("SERVICE_DELIVERY_POINT_SK"="SERVICE_DELIVERY_POINT_SK" AND
              "SAP_INT_LOGICAL_REGISTER_SK"="SAP_INT_LOGICAL_REGISTER_SK")
   4 - access("ASSET_CD"="EQUIP_CD")
   5 - filter("ROW_CURRENT_IND"='Y')
   9 - access("NETWORK_TARIFF_CD"="NETWORK_TARIFF_CD")
10 - filter("ROW_CURRENT_IND"='Y')
12 - filter("ROW_CURRENT_IND"='Y' AND "CONROL_REGISTER"='X')
13 - access("METER_CONFIG_HEADER_SK"="METER_CONFIG_HEADER_SK")
14 - filter("ROW_CURRENT_IND"='Y')
15 - filter("ROW_CURRENT_IND"='Y' AND ("NMI_STATUS_CD"='A' OR "NMI_STATUS_CD"='D'))
16 - access("NMI_SK"="NMI_SK")
17 - filter("ROW_CURRENT_IND"='Y')
18 - access("SERVICE_DELIVERY_POINT_SK"="SERVICE_DELIVERY_POINT_SK")
19 - access("SAP_INT_LOG_DEVICE_SK"="SAP_INT_LOG_DEVICE_SK")
20 - filter((SUBSTR("REGISTER_ID_CD",1,1)='4' OR SUBSTR("REGISTER_ID_CD",1,1)='5' OR
              SUBSTR("REGISTER_ID_CD",1,1)='6') AND "REGISTER_TYPE_CD"='C' AND "ROW_CURRENT_IND"='Y')
21 - filter("ROW_CURRENT_IND"='Y')
23 - access("SAP_INT_LOGICAL_REGISTER_SK"="SAP_INT_LOGICAL_REGISTER_SK")
24 - filter((SUBSTR("REGISTER_ID_CD",1,1)='1' OR SUBSTR("REGISTER_ID_CD",1,1)='2' OR
              SUBSTR("REGISTER_ID_CD",1,1)='3') AND "REGISTER_TYPE_CD"='C' AND "ROW_CURRENT_IND"='Y')
25 - filter("ROW_CURRENT_IND"='Y')Edited by: abhilash173 on Feb 24, 2013 9:16 PM
Edited by: abhilash173 on Feb 24, 2013 9:18 PM

Hi Paul,
I misread your question initially .The system stats are outdated in both ( same result as seen from aux_stats) .I am not a DBA and do not have access to gather system stats fresh.
select * from sys.aux_stats$
SNAME     PNAME     PVAL1     PVAL2
SYSSTATS_INFO     STATUS     NULL     COMPLETED
SYSSTATS_INFO     DSTART     NULL     02-16-2011 15:24
SYSSTATS_INFO     DSTOP     NULL     02-16-2011 15:24
SYSSTATS_INFO     FLAGS     1     NULL
SYSSTATS_MAIN     CPUSPEEDNW     1321.20523     NULL
SYSSTATS_MAIN     IOSEEKTIM     10     NULL
SYSSTATS_MAIN     IOTFRSPEED     4096     NULL
SYSSTATS_MAIN     SREADTIM     NULL     NULL
SYSSTATS_MAIN     MREADTIM     NULL     NULL
SYSSTATS_MAIN     CPUSPEED     NULL     NULL
SYSSTATS_MAIN     MBRC     NULL     NULL
SYSSTATS_MAIN     MAXTHR     NULL     NULL
SYSSTATS_MAIN     SLAVETHR     NULL     NULL

Multiple MM schedule lines for the same date

Hello All Gurus,
I am facing a problem where the MM schedule lines are divided into various quantites for the same date. For example on 02/11/2010 the total quantity is 120, it is appearing in the below form in ME38:
02/11/2010 - 40
02/11/2010 - 40
02/11/2010 - 40
Although this is not an error, but my client is not happy with this. Can someone tell me why I am getting this error? Is it because of the rounding value that we maintain in MRP 1 view of material master record? Or is there any other setting that I am missing?
Please let me know. I would be very much thankful to you.
Thanks and Regards,
Umakanth

Hi,
Before changing the setup, note that sometimes it is beneficial to split one demand into multiple delivery schedules. Especially if the demand is bigger than equipment type (container/truck etc.). If you want to manage inbound transportation for such delivery schedules, it is much simpler to do this when each delivery schedule is not bigger than one equipment.
Regards,
Dominik Modrzejewski

BPS You have no authorization for the requested data

We are implementing Hierarchy node based security for our BPS.
When the user tries to display the planning layout, they get the error message "You have no authorization for the requested data "
I have given authorization to the relavant Infocubes, also checked the all the Authorization Relavant Info Objects and added theses Info Object to the custom authorization created in RSECADMIN.
Also added the info objects 0TCAACTVT, 0TCAIPROV, 0TCAVALID to the custom authorization.
In pfcg, this authorization has been added to S_RS_AUTH. I have also given activity 02, 03, 16 values and a * to planning areas, functions, packages, groups, levels, folders, ... to the objects R_AREA
R_BUNDLE
R_METHOD
R_PACKAGE
R_PARAM
R_PLEVEL
R_PM_NAME
R_PROFILE
But still we get the same error.
Has anyone encountered this problem? Can you please provide me some clues to resolve this issue

Thank you very much Grevaz, but that template does not help.
I did run both ST01 trace and BI RSECADMIN trace. RSECADMIN Trace shows the below authorization failure
Subselection (Technical SUBNR) 1
Supplementation of Selection for Aggregated Characteristics
No Check for Aggregation Authorization Required
Following Set Is Checked Comparison with Following Authorized Set Result Remaining Quantity
Characteristic Contents
0FUNDS_CTR
0TCAACTVT
SQL Format:
FUNDS_CTR BETWEEN '4012001000'
AND '4012001999'
AND TCAACTVT = '03'
Characteristic Contents
0FUNDS_CTR Node 1 I EQ #
I EQ :
0TCAACTVT I EQ 02
I EQ 03
Partially Authorized (Average)   Characteristic Contents
0FUNDS_CTR
0TCAACTVT
SQL Format:
FUNDS_CTR > '4012001000'
AND FUNDS_CTR <= '4012001999'
AND NOT FUNDS_CTR IN ('4012001001','4012001002','4012001003','4012001004','4012001005','4012001006','4012001007','4012001008','4012001009','4012001010')
AND TCAACTVT = '03'
Value selection partially authorized. Check of remainder at end
Following Set Is Checked Comparison with Following Authorized Set Result Remaining Quantity
Characteristic Contents
0FUNDS_CTR
0TCAACTVT
SQL Format:
FUNDS_CTR > '4012001000'
AND FUNDS_CTR <= '4012001999'
AND NOT FUNDS_CTR IN ('4012001001','4012001002','4012001003','4012001004','4012001005','4012001006','4012001007','4012001008','4012001009','4012001010')
AND TCAACTVT = '03'
Characteristic Contents
0FUNDS_CTR Node 1 I EQ #
I EQ :
0TCAACTVT I EQ 02
I EQ 03
Not Authorized
All Authorizations Tested
Message EYE007: You do not have sufficient authorization
No Sufficient Authorization for This Subselection (SUBNR)
Following CHANMIDs Are Affected:
206 ( 0FUNDS_CTR )
Authorization Check Complete
We have created custom authorization and trying to restrict based on hierarchy node.
One point I observed is, when I give access to all nodes with a wildcard * in the custom authorization, then the error disappears and the layout is visble. But our point here is to try to restrict based on the nodes and we cannot give display access to all nodes.

Vista & Outlook 2007: Sync with second XP & Outlook 2003 - The passed buffer is too small for the reply data

Dear Community,
I'm synchronising my T3 with two PCs. One with Vista & Outlook 2007 and the other with XP & Outlook 2003. Both with the latest conduit & Hotsync Manager versions installed for each OS based on the availability on the Palm Website.
My problem is that when I synchronise the T3 with either PC and then try to sync it with the other I'm receiving the following error message for the Calendar:
Outlook Calendar
The passed buffer is too small for the reply data.
OLERR:0D-0008
OLERR:0D-0004
OLERR:0D-0001
- Slow Sync
Outlook Calendar synchronization failed
The second time the sync is successful but takes a long time and the actual problem is that it creates duplicates for records previously changed on either PC - but with a sync in between those changes, i.e. no conflict in the sense that the same record was changed in both environments since the last sync. I have configured the conflict handling to establish a hierarchy PC1-T3-PC2 but try to avoid them by synchronising as often as possible.
Has anyone come across that problem or any ideas? Can you somehow adjust the buffer size for the sync? I have been using Lotus Organiser & then the various Outlook versions for a number of years.
Thank you
Rainer
Post relates to: Tungsten T3
Post relates to: Tungsten T3

As they say on TV, "Doh"!!!
I figured out the problem. I started the Sync tool, selected "Settings", then "Mcrosoft Outlook" tab and then "Select Folders" button. I browsed to the proper folders in Outlook (Calendar, Tasks, etc). Select OK enough times and retried the sync.
It worked.

Could not start cache agent for the requested data store

Hi,
This is my first attempt in TimesTen. I am running TimesTen on the same Linux host (RHES 5.2) that running Oracle 11g R2. The version of TimesTen is:
TimesTen Release 11.2.1.4.0
Trying to create a simple cache.
The DSN entry for ttdemo1 in .odbc.ini is as follows:
+[ttdemo1]+
Driver=/home/oracle/TimesTen/timesten/lib/libtten.so
DataStore=/work/oracle/TimesTen_store/ttdemo1
PermSize=128
TempSize=128
UID=hr
OracleId=MYDB
DatabaseCharacterSet=WE8MSWIN1252
ConnectionCharacterSet=WE8MSWIN1252
Using ttisql I connect
Command> connect "dsn=ttdemo1;pwd=oracle;oraclepwd=oracle";
Connection successful: DSN=ttdemo1;UID=hr;DataStore=/work/oracle/TimesTen_store/ttdemo1;DatabaseCharacterSet=WE8MSWIN1252;ConnectionCharacterSet=WE8MSWIN1252;DRIVER=/home/oracle/TimesTen/timesten/lib/libtten.so;OracleId=MYDB;PermSize=128;TempSize=128;TypeMode=0;OracleNetServiceName=MYDB;
(Default setting AutoCommit=1)
Command> call ttcacheuidpwdset('ttsys','oracle');
Command> call ttcachestart;
*10024: Could not start cache agent for the requested data store. Could not initialize Oracle Environment Handle.*
The command failed.
The following is shown in the tterrors.log:
15:41:21.82 Err : ORA: 9143: ora-9143--1252549744-xxagent03356: Datastore: TTDEMO1 OCIEnvCreate failed. Return code -1
15:41:21.82 Err : : 7140: oraagent says it has failed to start: Could not initialize Oracle Environment Handle.
15:41:22.36 Err : : 7140: TT14004: TimesTen daemon creation failed: Could not spawn oraagent for '/work/oracle/TimesTen_store/ttdemo1': Could not initialize Oracle Environment Handl
What are the reasons that the daemon cannot spawn another agent? FYI the environment variables are set as:
ORA_NLS33=/u01/app/oracle/product/11.2.0/db_1/ocommon/nls/admin/data
ANT_HOME=/home/oracle/TimesTen/ttdemo1/3rdparty/ant
CLASSPATH=/home/oracle/TimesTen/ttdemo1/lib/ttjdbc5.jar:/home/oracle/TimesTen/ttdemo1/lib/orai18n.jar:/home/oracle/TimesTen/ttdemo1/lib/timestenjmsxla.jar:/home/oracle/TimesTen/ttdemo1/3rdparty/jms1.1/lib/jms.jar:.
oracle@rhes5:/home/oracle/TimesTen/ttdemo1/info% echo $LD_LIBRARY_PATH
/home/oracle/TimesTen/ttdemo1/lib:/home/oracle/TimesTen/ttdemo1/ttoracle_home/instantclient_11_1:/u01/app/oracle/product/11.2.0/db_1/lib:/u01/app/oracle/product/11.2.0/db_1/network/lib:/lib:/usr/lib:/usr/ucblib:/usr/local/lib
Cheers

Sure thanks.
Here you go:
Daemon environment:
_=/bin/csh
DISABLE_HUGETLBFS=1
SYSTEM=TEST
INIT_FILE=/u01/app/oracle/product/10.1.0/db_1/dbs/init+ASM.ora
GEN_APPSDIR=/home/oracle/dba/bin
LD_LIBRARY_PATH=/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/ttoracle_home/instantclient_11_1:/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/lib:/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/ttoracle_home/instantclient_11_1:/u01/app/oracle/product/11.2.0/db_1/lib:/u01/app/oracle/product/11.2.0/db_1/network/lib:/lib:/usr/lib:/usr/ucblib:/usr/local/lib
HOME=/home/oracle
SPFILE_DIR=/u01/app/oracle/backup/+ASM/initfile_dir
TNS_ADMIN=/u01/app/oracle/product/11.2.0/db_1/network/admin
INITFILE_DIR=/u01/app/oracle/backup/+ASM/initfile_dir
HTMLDIR=/home/oracle/+ASM/dba/html
HOSTNAME=rhes5
TEMP=/oradata1/tmp
PWD=/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/bin
HISTSIZE=1000
PATH=/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/bin:/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/quickstart/sample_code/oci:/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/quickstart/sample_code/odbc:/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/quickstart/sample_code/odbc/xla:/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/quickstart/sample_code/jdbc:/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/quickstart/sample_code/odbc_drivermgr:/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/quickstart/sample_code/proc:/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/quickstart/sample_code/ttclasses:/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/quickstart/sample_code/ttclasses/xla:/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/ttoracle_home/instantclient_11_1:/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/ttoracle_home/instantclient_11_1/sdk:/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/3rdparty/ant/bin:/usr/kerberos/bin:/bin:/usr/bin:/usr/local/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:/usr/platform/SUNW,Ultra-2/sbin:/u01/app/oracle/product/11.2.0/db_1:/u01/app/oracle/product/11.2.0/db_1/bin:.
GEN_ADMINDIR=/home/oracle/dba/admin
CONTROLFILE_DIR=/u01/app/oracle/backup/+ASM/controlfile_dir
ETCDIR=/home/oracle/+ASM/dba/etc
GEN_ENVDIR=/home/oracle/dba/env
DATAFILE_DIR=/u01/app/oracle/backup/+ASM/datafile_dir
BACKUPDIR=/u01/app/oracle/backup/+ASM
RESTORE_ARCFILES=/u01/app/oracle/backup/+ASM/restorefile_dir/restore_arcfiles.txt
TMPDIR=/oradata1/tmp
CVS_RSH=ssh
ARCLOG_DIR=/u01/app/oracle/backup/+ASM/arclog_dir
REDOLOG_DIR=/u01/app/oracle/backup/+ASM/redolog_dir
INPUTRC=/etc/inputrc
LOGDIR=/home/oracle/+ASM/dba/log
DATAFILE_LIST=/u01/app/oracle/backup/+ASM/datafile_dir/datafile.list
LS_COLORS=no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.btm=00;32:*.bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.bz=00;31:*.tz=00;31:*.rpm=00;31:*.cpio=00;31:*.jpg=00;35:*.gif=00;35:*.bmp=00;35:*.xbm=00;35:*.xpm=00;35:*.png=00;35:*.tif=00;35:
PS1=rhes5:($ORACLE_SID)$
G_BROKEN_FILENAMES=1
SHELL=/bin/ksh
PASSFILE=/home/oracle/dba/env/.ora_accounts
LOGNAME=oracle
ORA_NLS10=/u01/app/oracle/product/11.2.0/db_1/nls/data
ORACLE_SID=mydb
APPSDIR=/home/oracle/+ASM/dba/bin
ORACLE_OWNER=oracle
RESTOREFILE_DIR=/u01/app/oracle/backup/+ASM/restorefile_dir
SQLPATH=/home/oracle/dba/bin
TRANDUMPDIR=/tran
RESTORE_SPFILE=/u01/app/oracle/backup/+ASM/restorefile_dir/restore_spfile.txt
RESTORE_DATAFILES=/u01/app/oracle/backup/+ASM/restorefile_dir/restore_datafiles.txt
ENV=/home/oracle/.kshrc
SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass
SSH_CONNECTION=50.140.197.215 62742 50.140.197.216 22
LESSOPEN=|/usr/bin/lesspipe.sh %s
TERM=xterm
GEN_ETCDIR=/home/oracle/dba/etc
SP_FILE=/u01/app/oracle/product/10.1.0/db_1/dbs/spfile+ASM.ora
ORACLE_BASE=/u01/app/oracle
ASTFEATURES=UNIVERSE - ucb
ADMINDIR=/home/oracle/+ASM/dba/admin
SSH_CLIENT=50.140.197.215 62742 22
TZ=GB
SUPPORT=oracle@linux
ARCHIVE_LOG_LIST=/u01/app/oracle/backup/+ASM/arclog_dir/archive_log.list
USER=oracle
RESTORE_TEMPFILES=/u01/app/oracle/backup/+ASM/restorefile_dir/restore_tempfiles.txt
MAIL=/var/spool/mail/oracle
EXCLUDE=/home/oracle/+ASM/dba/bin/exclude.lst
GEN_LOGDIR=/home/oracle/dba/log
SSH_TTY=/dev/pts/2
RESTORE_INITFILE=/u01/app/oracle/backup/+ASM/restorefile_dir/restore_initfile.txt
HOSTTYPE=i386-linux
VENDOR=intel
OSTYPE=linux
MACHTYPE=i386
SHLVL=1
GROUP=dba
HOST=rhes5
REMOTEHOST=vista
EDITOR=vi
ORA_NLS33=/u01/app/oracle/product/11.2.0/db_1/ocommon/nls/admin/data
ODBCINI=/home/oracle/.odbc.ini
TT=/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/
SHLIB_PATH=/u01/app/oracle/product/11.2.0/db_1/lib:/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1//lib
ANT_HOME=/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/3rdparty/ant
CLASSPATH=/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/lib/ttjdbc5.jar:/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/lib/orai18n.jar:/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/lib/timestenjmsxla.jar:/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/3rdparty/jms1.1/lib/jms.jar:.
TT_AWT_PLSQL=0
NLS_LANG=AMERICAN_AMERICA
NLS_COMP=ANSI
NLS_SORT=BINARY
NLS_LENGTH_SEMANTICS=BYTE
NLS_NCHAR_CONV_EXCP=FALSE
NLS_CALENDAR=GREGORIAN
NLS_TIME_FORMAT=hh24:mi:ss
NLS_DATE_FORMAT=syyyy-mm-dd hh24:mi:ss
NLS_TIMESTAMP_FORMAT=syyyy-mm-dd hh24:mi:ss.ff9
ORACLE_HOME=
DaemonCWD = /home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/info
DaemonLog = /home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/info/tterrors.log
DaemonOptionsFile = /home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/info/ttendaemon.options
Platform = Linux/x86/32bit
SupportLog = /home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/info/ttmesg.log
Uptime = 136177 seconds
Backcompat = no
Group = 'dba'
Daemon pid 8111 port 53384 instance ttimdb1
End of report

Is it possible for the test equip. to tell me the measured data is ready?

Similar Messages

Maybe you are looking for