Is it possible if overtime calculated under 2 cost centers.

Hi experts outhere,
I have 2 question to ask :
1. Is it possible if overtime calculated under 2 cost centers. For example, IT exec working overtime this week in IT dept. The overtime will go to IT cost center.Next week, IT exec working overtime in HR dept,and overtime calculated under cost centers of HR dept.
2. Calculation for current rate based on 8 hours working hours. Is it possible to have another calculation for those who working hours 7.5 hours.
Thanks in advance

Hi,
1. Similar to what was already suggested you can assign posting cost center in IT 2002 "Attendances" or 2010 "Employee remuneration" (see button "Cost assignment" or Ctrl+F2).
2. The answer depends on how you compensate overtime: a) you use standard procedure with table V_512W_B and compensation is based on hourly rates. Then system should use right hourly rate for 8 and 7.5 h. daily WSR, b) you calculate compensation in the PCR, then you have to adjust PCR.
Cheers

Similar Messages

KSS1 - Variance calculation on cost centers

Hello,
i ran KSS1 but the variance calculated is the difference between actual and planned amounts (in my scenario planned = target).
Actually, i'd like to calculate and book the variance between costs booked on cost centers and absorptions coming from labour hours. At the end the aim is post somewhere the over/under absorption of production cost centers.
Any suggestion?
Thanks,
Reagrds
Enrico

Hi,
i must settlement product order, so i need variance calculation. So can i settlement variances to FI only for some components of BOM and one variances of one component leave on procuct order? Or can i settlement variances of one component of BOM to other cost centrum than others components (alternatively under other cost elements)? Maybe substition.... If yes, how?
Thanks a lot,
Gustavo

Is it possible multiple line items debit & single line item credit and different cost centers and different profit centers in fbcj

Hi all ,
I have a requirement to Post Cash Journal Document using FBCJ tcode.
Is it possible multiple line items debit & single line item credit and different cost centers and different profit centers
for exp:
pk   GL a/c   description       amount   cost center profit center
40 400101 telephone exp   500        1403            P 1000
40 400101 telephone exp    100       1404            P 2000
50 200100 cash in hand      600-
   This is My requirement is it possible in fbcj
    Please suggest me.ASAP.
Regards
   Naresh.

Hi,
This you can do it in two ways:
1. Make three header under top level....one Product A, 2nd Product B ( as Billing element) and third as Common expense ( only cost). Now 1st & 2 nd WBS, you have to have sales order linking with individual lint item, for third you will accumulate all the common expense till the period end then make a reposting of the same in desired proportion to both products WBS hierarchy
(This is if you want to have a track on the common expense as well.......like planning, budgeting & control)
After this reposting, run RA for individual billing element and hence you will all the complement detailing and control over Revenue and expense with respect to Product A and Product B individually.
2. If you don't want to maintain that kind of detailing the common expense and keep track of it through project, then have cost centers accordingly and make an assesment/ distribution with respect to expenses accumulated at those cost centers for the period to the respective WBS under each product. Then execute the period end processes for the project.
Or
You can try with have two more line items in the costing sheet as an overhead against common expenses with respect each product.
I hope this should help you.
Regards
Avisek Bhardwaj

Calculated Std cost est vs Material Master Std cost price

Hi all,
Why will a calculated std cost est not be equal to my standard price in my costing 2 view on the material master? For ex:
I calc a price for material 1 = R11.50
The price in the material master (MBEW-STPRS) is R10.80.
I can see that the difference is some activities for one of the operations in my production process, but it does not show on my material master.
Can anyone suggest a solution?
Thanks,
Hein

The planned price can be copied from CO-PC, or entered manually depending on your settings in CO. If you open the standard material cost and release it the two price of planning price and standard price will be same.
As to the price of PO that is another price, actual cost happened.
FYI.
If no marked standard cost estimate exists, you can enter a price in this field manually. This makes it possible for the system to find a price when costing an assembly via the valuation strategy, even if no standard cost estimate with status KA (correct) exists for a BOM material (such as a raw material or semifinished product).
If you subsequently create and flag a cost estimate for this material, the results of this cost estimate are adopted as the future planned price, and the manual entry overwritten. It can then no longer be changed. Therefore, you are recommended to use the Planned price 1, Planned price 2, and Planned price 3 fields to maintain the planned prices of material components and to define them in the valuation strategy.

Decimal inconsistency in calculated inventory cost

Hi,
Material Std price is 26.77
while issuing (261) the quantity 11.500 the system is calculating the cost 26.77 * 11.500 = 307.85 (rounding 307.855 to 307.85)
and while reversing (262) this transaction, the system is calculating the cost 307.86 (rounding 307.855 to 307.86)
0.01cost difference is coming.
is there any solution or SAP Note to change cost calculation?

Hi
One possible solution, which I always prefer is, to have the price unit of 1000 instead of 1...Even SAP recommends this... You can avoid a huge chunk of rounding errors with this
You can change price unit anytime using T code MASS or MM17....
regards
Ajay M

WBS Elements and Asset Under Constructions have different Cost Centers

Hello Experts,
We have created a WBS element in one of the projects.
As per standard process, when we create the WBS Element the Asset under construction is also getting created through the settlement rule within the WBS.
These assets should have the same Cost Center as the WBS has. However we are in a situation wherein the Cost Center in the asset under construction is different than the Cost Center in the WBS.
I have checked the settings like automatic account assignment, etc but all settings look correct.
Can you please explain first what could be the reason for such a difference between Cost Centers in WBS and AuC's and what is the solution to avoid it in future?
Thanks in advance
Leena

Thanks for your replies...
@ Alex - There is no Investment Programme ID maintained for this WBS in question since there is no IM for this project.
@ Abdul - Please elaborate more on Validation and Substitution.
Regards,
Leena.

Substitution written under cost center accounting is not working for tcode MB1B but working for MIGO_GI

Hi All
Do you know why this behaviour different for subtitution written under cost center accounting.
We have written substitution using coding block table. Logic of substitution is in case of any GL maintained in a set is being used for posting , then we will replace the cost center with profit center vlaue. Reason being we have same naming convention for Cost center and Profit center.
Thanks
Sonia

Hi,
MB1B is t-code for stock transfer posting.
Stock transfer posting generate FI document using balance sheet account, not P&L account.
Because you don’t create cost elements using balance sheet accounts related to stock, I think that Substitution written under cost center accounting is not working for tcode MB1B is right.

Function Modules, for listing Cost centers Under a manager

Hi All,
1. Can any one please suggest me any Function Module available for listing the cost center under a manager, given only the Manager's username or pernr.
2. And also the Function Group which has the collection of Function Modules which deals with operations and reporting on Cost centers from a Manager's Role (basically on budjet Monitoring aspects).
Thanks and Regards,
Girimurugan

If this is the followup of the previous post (responsible person) and you wanted to get a list of cost centers based on that using a FM , i doubt that there is a FM available for that. You have to read the table to get the info.
When you say manager, he could be a manager for a HR organisation but the cost organization may be different. in a typical set up it would be a cost center group (which will have set of cost centers under it) and this will be linked to a hr organization.
All this is purely based on how cost center hierarchy (standard hierarchy) and hr organization maintained and how they are linked.
Regards
Raja

Material ledger 643 movement type showing up under cost center

Hello everybody
We are in the process of implementing the material ledger.
We have two processes of stock transfer in our system
1. Plant to plant- mvmt type 641/101 (intracompany ) which ML is recognizing as stock transfer
2. Cross company STO- mvmt type 643/101 (intercompany) which ML is putting it under cost center and not as stock transfer
As the number 2 scenario is also stock transfer and we are seeing under cost center bucket we are not able to join the PGI document to the recieving site and vice versa of the GR to the supplying site. Hence have a problem to transfer variances too.
So is there any way-to make the cross company stock transfer also as a stock transfer in ckm3.
Appreciate it.
Sankara

Hi
Your requirement class settings must have had sales order as a cost object
1. Go to sale order, procurement tab
2. Check whats the req type
3. Go to OVZH and check whats the req class assigned to this req type
4. Go to OVZG and check whats the acount assignment cateory in req class.. I think it is E
You should use a proper req class/type to avoid this error
br, Ajay M

Overtime calculation in TM00.

Hi Experts,
I am implementing positive time management and requirement for overtime calculation is as follows:
if employee works number of hours more than his/her daily work schedule the overtime wage type should get generated for the excess hours.
e.g. employee's daily working hours are 8 hrs (9 to 6 with 1 hour unpaid break) and if he/she works till 9 in night but he/she was out off the office for 1 hour from 4 to 5 then only "2" hours overtime should get calculated.
currently 3 hrs overtime wage type (1OVT) is getting generated using GWT M ZML.
For work around I thought of keeping this 3 hrs OT as it is but creating one more deduction wage type (1DDC) for absence hour (pair 4 to 5) I have assigned the processing type as "A" for this pair type using V_T555Z and define the generation rule for generating the wage type fpr this in V_T510S but function DEFTP is changing the processing type of this absence hour pair to "S" again because of which the wage type (1DDC) is not getiing generating.
Please suggest how to proceed with this. If you have any other solution please suggest.
Thanks in advance.
Thanks,
Javed
Edited by: javedshaikh on Sep 8, 2011 11:30 AM

Hi Okan,
I did not get what your below part:
MOBDE MODIF TPCOD FUNC1 ZART1 FUNC2 ZART2 FUNC3 ZART3 FUNC4 ZART4
01 01 01 ZNOT 0320 0330
After TIMTP ZNOT must be able to seen
I have maintained the view V_T555z
I have created the attendance quota 01 and created entry in 2007 for 2 hours for date 1st april 2004 (with and without meantioning the time)
then I maintained the time event entries in 2011 with 1 hr overtime.
but after rule TO20 the processing type of the time pair is not getting changed to "M", also the attendance quota 01 is not
getting deducted.
the output is as follows:
Call rule TO20
From     To       1 P ID CT P TTyp BR   ER   C O I BPin EPin PT    ALP C1    AB Number
18.0000 19.5000     1 01 00 S 0310 P10 P20     E                 0001                   1.5000
Rule   GrRule TType VaKey    Operation
TO20      *   ****           OUTTPPTYPE Pair type
TO20      *   **** 1        GCY TO21   Goto PC rule
TO21      *   ****           HRS=D0000 Set
TO21      *   ****           HRS?S      Decision op.     HRS
TO21      *   **** *        OUTTPVTYPE Process.ty.
TO21      *   **** * S      HRS-PNUM   Subtraction
TO21      *   **** * S      HRS?S      Decision op.     HR
TO21      *   **** * S <    HRS=R      Set
TO21      *   **** * S <    GENTPB   S Sep. Time Pair Start
TO21      *   **** * S <    GENOT      Generate overtime
TO21      *   **** * S <    ADDDB0000- Subtract day balance
OUTPUT:
table tip overtime entry
18.0000 19.5000     1 01 00 S 0310 P10 P20     E                 0001                   1.5000
Please suggest why the processing type is not getting change to M and the quota is not getting deducted....
Thanks,
Javed

Create cost centers under a center

Hi Gurus
Can someone help me with this issue.
My PP colleague wants to have three cost centers C1,C2,C3 created under Cost center A. The three cost centers represent robots used in production. He wants to have production of these robots roll up to cost center A. My problem is I cannot remember how to create a cost center under another cost center, let alone three of them under the same cost center.
Please help asap
Regards
Manette

Hi
There is no such feature in SAP.. You can just have a Cost center group (KSH1) for reporting purposes.. There is no concept of Cost cneter under a Cost center
Ajay M

Usage of Activity types under Cost Centre.

Hi
I would like to know the usage of activity types under cost centre.
How to do direct and indirect activity type allocation. Please explain indetail from scratch to finish with necessary t.codes at the earliest.
Appreciate your cooperation at the earliest.
regards.

Hi,
as far as usage of activity types under cost center is concerned it is addressed by ist reply to your query by another SAP Guru.
with respect to Direct activity allocation,
When we know the source cost center and target cost center then we allocate the activities from source cost center to Target cost center (T.Code KB21N)
The cost is picked from the planned price given at KP26.
Withe respect to Indirect activity allocation:
We do not know the Traget Cost center in this case.
First we need to enter the activity consumption in the sender cost center (source cost center).
Then we need to allocate then indirectly to the target cost centers on some allocation basis using distribution cycles
I am sure this will clear your query.
Please assign points suitably
Best Regards
surya

How to Maintaining Cost component under cost component structure?

Hi Gurus,
How to Maintaining Cost component under cost component structure?
I am using OKTZ trx for cost element and cost component maintaiance but when i am trying to maintain the cost element and corresponding cost comp , i am not able to find a cost comp on F4 help.
Plz let me know , ur guidance will be rewarded ..

Using command:
ASSIGN COMPONENT idx OF STRUCTURE struc TO <fs>.
For example:
DESCRIBE FIELD pi_output TYPE pi_output COMPONENTS lv_columns. "For number of columns
DO lv_columns TIMES.
ASSIGN COMPONENT SY-INDEX OF
STRUCTURE (name of structure) TO <l_fs_output>. "<l_fs_output> - field of structure
DESCRIBE FIELD <l_fs_output>... "with other options.
ENDDO.

Using concessional excise calculation under taxinn

dear all
we are evalution taxinn in ecc6. based on the sap document we have configured the normal taxinn and the same is shown in the sales order.
but in the present setup, the client needs to modify the excise duty at the order level rather than changing the value at VK11 --> JEXP.
did anyone work on the concessional excise calculation under taxinn ? and if yes how did they comply with the concessional excise calculation requirement
full point will be given
regards

dear saurabh,
thanks for the reply
the first logic will not work as the client is SOX compliant compnay and the values for pricing procedures should always come from vk11
the 2nd alt will also not work with the client becasue of the first reason.
plz continue the good work

Overtime Calculation

hi everybody,
actually i was doing an audit for a client. there is a scenario for overtime calculation is like
(Basic Salary/30)/81.5No of Hours
based on this calculation employee will get loss in the month of february why bcoz no. of days in that are 28.
based on this calculation employer will get loss in the months of 31 days
am i right? correct me if i am wrong.
now the client want to change that 30 days to the number of days of that month.
how to write this rule.
inputs will be highly appreciated

https://forums.sdn.sap.com/click.jspa?searchID=16169444&messageID=5765129

Is it possible if overtime calculated under 2 cost centers.

Similar Messages

Maybe you are looking for