Calculated Std cost est vs Material Master Std cost price

Hi all,
Why will a calculated std cost est not be equal to my standard price in my costing 2 view on the material master? For ex:
I calc a price for material 1 = R11.50
The price in the material master (MBEW-STPRS) is R10.80.
I can see that the difference is some activities for one of the operations in my production process, but it does not show on my material master.
Can anyone suggest a solution?
Thanks,
Hein

The planned price can be copied from CO-PC, or entered manually depending on your settings in CO. If you open the standard material cost and release it the two price of planning price and standard price will be same.
As to the price of PO that is another price, actual cost happened.
FYI.
If no marked standard cost estimate exists, you can enter a price in this field manually. This makes it possible for the system to find a price when costing an assembly via the valuation strategy, even if no standard cost estimate with status KA (correct) exists for a BOM material (such as a raw material or semifinished product).
If you subsequently create and flag a cost estimate for this material, the results of this cost estimate are adopted as the future planned price, and the manual entry overwritten. It can then no longer be changed. Therefore, you are recommended to use the Planned price 1, Planned price 2, and Planned price 3 fields to maintain the planned prices of material components and to define them in the valuation strategy.

Similar Messages

How to get Material Master Moving average price into Purchase Order

Hi,
How to get Material master moving average price into purchase order instead of Purchase Info record.
Thanks,
Sridhar

Hi,
        I cannot understand whether it is necessary .
       How about as following step?
             1. create Purcahse requisition
                            Price come form moving average price in material master.
             2. Create Purchase order reference Purchase requisition
                            There is a setting from the unit price of P/R onto the unit price of P/O.
Regards,
     Gaito

Updating Material Master Moving Average Price using BAPI

Hi,
We need to create a program using which we can update material master moving average price for a specific material.
For this we are using BAPI_MATERIAL_SAVEDATA.
when we are executing this bapi with inputs, it is showing data updated or created but when we are checking it in MAterial Master the data (MOving Price ) is not getting updated.
Please advise,
Thanks.

I am trying to use BAPI_MATVAL_PRICE_CHANGE to change the price of a material in material master
(The moving average price [MAP] in Accounting View 1)
Using the BAPI, I enter
--> RFC target are
-> Material No.
-> Valuation Area
--> Prices table (I enter the new price that i want)
when I run the BAPI, i get error message (This can be seen in the returns table)
ID --> CKMLSENDPRICE
MESSAGE NUMBER --> 701
DETAILS --> No customizing data for Valuation Area XXXX found
PLease advise.

Material Master "S" & "V" Price

Hi
In Matl master for wat matl we hv to maintain std price "S" n for wat matl we hv to maintain price "V"..
1. Is SAP suggessting anything like these hv to maintain S & V ...?
Regards
Ram

Price Control V or S in material type
When is it useful to use the price control V or S in Material Master ?
Do I have to follow the SAP standard setting in the material type for the following material types:
- ROH(Raw materials) -> moving average price
- HALB(Semifinished products) -> standard price
- FERT(Finished products) -> standard price
In which case and why is useful to change these standard setting in material type?
What is difference between standard price and moving average price?
When and how to use it?
Standard price are used for products that do not fluctuated frequently. It is usually used for finished or semi finished products.
Moving average price are used mainly for raw materials that are purchased externally. The advantage of using moving average price for your raw materials is that your inventory costs will always reflect the current market cost.
SAP strongly recommends that you do not select price control V for semi-finished products and finished products, because doing so will very easily cause the calculation of unrealistic valuation prices. SAP recommends:
Price control V for raw materials and trading goods; price control S for semi-finished products and products.
If you nevertheless select price control V, take care in the following situations:
1. Unrealistic prices occur if materials are produced and also retire during one period (that is, the inventory at the end of the period is smaller than the total of aquisitions from production orders) and if, in addition, several production orders belonging to a material were finished in this period, and the production order settlement calculates variances at the end of the period. Every single production order carries out an inventory coverage check and may therefore cause the moving average price to be changed. However, the individual production orders do not check whether the inventory available at the end of the period has already been debited by another production order.
Example: on 20 workdays in the period, 1 piece of material xyz was produced for each day and delivered to the warehouse at a price of USD 1000. At the end of the period there is 1 piece at the warehouse. Since an activity price of a participating cost center was higher than planned , every single production order calculates cost of goods manufactured of USD 1100 during the settlement. Every single one carries out a inventory coverage check and finds out that the variance can be posted completely to the inventory. That is, the ending inventory of one piece is debited with USD 20 x 100 and it consequently receives a price of USD 3000.
1. A settlement is carried out although not all costs have yet been posted to the order. This can even result in a price of 0 for the delivered product.
2. No period check of the costs is carried out on the order, that is, costs from previous periods may be settled.
3. Settling orders is already possible in the 'Delivery completed' status.
Solution: Standard price for products together with possible manual price changes.
If you are required to valuate semi-finished and finished products with actual prices that correspond to the costs of the actual production, SAP recommends you use the function of the material ledger for this. Here, a periodic actual price is created that is calculated on a much more reliable basis than the moving average price. A so-called price limiter quantity is used which makes sure that in the above example price differences are proportionally taken into account (95% of the total price differences) when valuating the 19 pieces withdrawn from material xyz which results in a periodic actual price of 1100 USD. In addition, it is possible as of Release 4.5 to even take into account the variances of the actual prices of the raw materials in the valuation of the semi-finished and finished products that are manufactured from it.
If we select std price for any type of material or mav and then make po, it will pick from material master or what?
The Purchase Info Record have the FIRST priority. When no po info record is found, the Purchase Order will pick the user LAST enter price. The PO module do not pick up any price from material master.
Regards,
Ashok

Material Master Moving Ave. price automatic in Purchase Order

Hi Experts!
Good day! Does anyone know how I can configure the Material Master Moving Ave. Price to be automatically reflected in a Purchase Order?
Actually I am doing a Stock Transfer Order, and I want that the Moving Ave. Price maintained in the Material Master reflected in the order.
Thank you!
Mik

take an abaper help , user exit
table MBEW filed VERPR from mat master to doc type( PO doc type) , MEPO1211,NETPR .
rewds

Can we bring MAP of Material Master for Purchasing price.

Dear All,
Can any body suggest , how to get the MAP of Material Master in Purchase Oder in PBXX or PB00 or any other condition type.
Our Business requirement is very dynamic and requires MAP of Material master price rather PIR to avoid master data maintainance.
Thanks & Regards
Sudhansu

hi..
go to m/06 and open ur condition type...
then..in condition category tab choose "t" i.e. Moving average price.
try it out..
hope it works..
thnks..

Cost Estimate saving in material master.

Hi Gurus,
We have two costing variant. One standard variant(PPC1) is to update in Material master as standard price. Another one it need to update in the Tax price in material master as reference for sales. We created seperate varaint to update in tax price. But after releasing it not picking full value. Can you guide me how we do the setting to update full value in tax price in the material master.
Regards.
Ramesh.

Hi
Go to OKTZ - Select your Cost Comp Str - Against each Cost Component, check whether they are marked as Relevant for Tax Price
Also, Select your Cost Comp Str and click on the Cost Component Views (Left side of the screen)
here, also mark as relevnt for Tax Price
br, Ajay M

SAP: Cannot save product cost in commercial price in material master

Hi,
I have created a PCE which is designed to save the cost estimate in commercial price in accounting tab in material master. The issue that I am facing is that the cost; that is released perfectly is not saving in the commercial price in material master; instead the price saved in the commercial price is the previous price.
If I try to change the "costing type" for the PCE to any where other than "commercial price" or tax price; the price is saved successfully.
My question is that why the PCE's price is not saved in the commercial or tax price in the material master.
I would really appreciate your help.
Regards,
OZ

Salaam Osman Bhai
In the costing type, choose "prices other than standard price".
And while doing CK24, you can choose the commercial price field to receive the cost estimate result
Br. Ajay M

Prices in Material Master

Dear all,
For the first time when we are going to upload stock figures & prices in Material Master which price should be use as a MAP for materials having price control status 'V' ?
Since valuation in costing is based on these factor, pl. provide relevant answer.
thanks
ranjeet

Hi,
prices in Material Master-
V-Variable Price/MAP
S-Std. Price
V-in material master you are using for external procurement
S-for inhouse production
If CO module implemented for Material S the costing will reun and for ' V'
during initial upload price will be uploaded.
Best Regards
Sainath

PuP price not changed in Material master

Hello All experts
I have one question about the material ledger related transaciton, I have a Material with 2+V (price deter. and price control) setting in Material master data in Accounting 1 TAB. And material ledger is active for this material, the Periodic Unit price is 1 USD in current period and stock is 0.
One PO posted for this Material for purchase with actual price 100 USD, and 101 movement type with special stock indicator E was used in Goods receipt posting. I think these stock will be treated as valuated sales order stock. But GR posting didn't trigger any PuP price change in Material master. Is that situation normal? Pls kindly help.

With price control V in activity-based material price determination (indicator2 in the material master), the moving average price is calculated. With price control S, the material is valuated with the standard price and the moving average price is calculated for information purposes.
In single-/multi-level material price determination(indicator 3 in the material master), the valuation price (standard price) remains unchanged and a periodic unit price is calculated for the closed period.
This option is only for materials with price control indicator S,and is only recommended if in addition to multiple currencies and/or valuations, you use single-/multi-level material price determination.
In single-/multi-level material price determination, a periodic unit price is updated for information, but it can only be used for material valuation in the closed period.

Production order variances not updating in material master

We have activated Material ledger-
Price determination selected-2(transaction based)
Finished goods standard price--832.50
Price control in material master-S (Standard Price)
Variances per kg: 265.50 is shown in Moving Price field in Material master-
Why it is not adding to standard Price-
How to add 265.50 per kg(variance) and increase the Finished goods valuation (in the balance sheet)
Thanks in advance
Joseph David

Hi,
After activating ML, if you maintain FG Material Price Control-S with Price Determination-2, the shown Moving Average price is ONLY FOR STATISTICAL/reporting PURPOSE, The goods movements and Material Inventory valuation will not be updated/valuated with Moving Average Price, it will still be done as per Standard Price only. If you want to get the full advantage of ML activated realistic/actual valuation of your inventory and goods movements, you need to change the Material Price Determination to u201C03u201D. Then as per SAP standard ML process, preliminary valuation for the material will be u201CStandard Priceu201D and all Price differences will be accumulated in ML categories and after period/month-end activities, the goods movements and inventory will be evaluated with u201CPeriodic Unit Priceu201D i.e., averaging by taking into consideration all Material Price differences.
Regards
appalas

MAP for the material in material master

Hi All
I have problem in moving average price of a model in material master
Example.
Material - ABC in material master
Moving average price - $10
total stock- 5 Toatl Value--$50
now i have sub con Po for material ABC(header) 10 Qty and item material DEF 10 Qty
Net price for header is Zero here. but item material price will be $10
after making the Gr for the sub con Po is the moving price of material ABC need to change as shown below or remains same.
Moving average price - $10
total stock- 510 Toatl Value--$50100
Thanks
Regards
Manju

hi,
u have done subc po for which material , its raw mat or semifin or finished
if u have created s po for semi material then, when u made gr then the material price will change as map is maintained in the material master.
but if it is finished product then the price of the material is same, bcs, standard price should be maintain in material master.
hope, this will clarify ur question,
regards,
susanta

Material Master Change Pointer IDOCs not generated for Moving Avg Price GR

No IDOC is created or distributed when the moving average price
changes. Each time a Goods Receipt is performed, the material master
moving average price (MBEW-VERPR) changes but the change is not
distributed. No change pointer is created in the tables. Why?
We need to send the moving average price each time it changes. In our
case, each time a Inbound Delivery has been Post Goods Receipt this
value changes for that material + plant combination and the value
should be sent.
The field MBEW-VERPR is included in BD52 as a field relevant for change
pointers for the message type.
Please advise.

Hello,
SAP will not generate change pointers (and no IDOCs) for Moving Average Price (MAP) changes. This is because MAP updates are not really Master Data changes and they are driven by transactions such as Goods Receipts, Revaluations etc. For these transactions, SAP will generate respective accouting documents for traceability.
Thanks,
Venu

Planned price in material master default in valuation price in PR

Hello,
I want to default planned price of material master in valuation price of Purchase requisition,
Currently MAP is defaulted in valuation price field in Purchase requisition.
Is this possible by using any user exit?
Regards

Yes this is possible .you have to use the BADI ME_PROCESS_REQ_CUST and method PROCESS_ITEM if the PR created manuallly or through MRP. Try this User exit also MEREQ001
If the PR created through sales order you could use user exit in sales order program name:SAPMV45A and subroutine : USEREXIT_MOVE_FIELD_TO_ME_REQ in the include MV45AFZB.
Appreciate if it is helpful

Material master price, inforecord price and GR

Hi gurus,
Can annybody please clear my confusion. On the PO the price that is proposed is from the inforecord. When we receive the PO, what is the price at which the stock will be valuated? is it the material master price or the inforecord price? if we change the price on the PO after the inforecord has proposed the price, will the GR be valuated at the changed price of the PO. Please expolain
Thanks
ANusha
Edited by: anusha vemulapati on Jan 19, 2010 8:11 PM

the GR is valuated according to the price control set in the material master. if the price control is standard price, then the GR is valuated with the standard price, no matter what price the PO has.
in case of moving average price: if the goods receipt is executed before the invoice receipt, the goods movement is valuated with the purchase order price. If an invoice is already posted, the system uses the price of the invoice. If a partial invoice is received, the partial quantity corresponding to the invoice is valuated with the invoice price, the rest is valuated with the purchase order price.
if you change the price in the PO before you do a Goods receipt (and before you post an invoice receipt), then the GR is valuated with this new entered price.
how the price in PO is determined can be read in OSS Note 456691 - FAQ: Price determination in purchasing

Calculated Std cost est vs Material Master Std cost price

Similar Messages

Maybe you are looking for