Is it possible to access channels on a DAQ board while the device is used by another applicatio​n?

I am curious if is possible to run an application that reads one channel of a DAQ board while another application already is reading different channels on the board.

Shoe,
You can have more than one application accessing a DAQ board at a time but not for the same type of process, such as analog input. I tried a setup where one program was accessing analog input channel 1 and a separate program was accessing analog input channel 2. Only one program would run at a time. However, you can have an analog input program and a separate analog output program accessing the same board running at the same time.
Hope this helps!

Similar Messages

  • Is it possible to access channels on a DAQ board while the device is used by another application?

    I am curious if is possible to run an application that reads one channel of a DAQ board while another application already is reading different channels on the board.

    Shoe,
    You can have more than one application accessing a DAQ board at a time but not for the same type of process, such as analog input. I tried a setup where one program was accessing analog input channel 1 and a separate program was accessing analog input channel 2. Only one program would run at a time. However, you can have an analog input program and a separate analog output program accessing the same board running at the same time.
    Hope this helps!

  • I get an Invalid Certificate notice when I try to access my https site for my printer. The serial number is the same as used by another certificate. In IE I was able to proceed to this address, but Firefox won't give me that option

    I get an Invalid Certificate notice when I try to access my https site for my printer. The serial number is the same as used by another certificate. In IE I was able to proceed to this address, but Firefox won't give me that option

    Hello,
    Thanks for contacting Mozilla Support!
    Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
    Note: ''This will temporarily log you out of all sites you're logged in to.''
    To clear cache and cookies do the following:
    #Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
    #Under "Time range to clear", select "Everything".
    #Now, click the arrow next to Details to toggle the Details list active.
    #From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
    #Now click the ''Clear now'' button.
    Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

  • Is is possible to access channels from a CAN database in labview with NI USB 8473s

    Hello,
    I would like to know whether is possible to access a CAN database, which is uploaded through MAX, in labview.
    More specifically, I have uploaded my CAN database in MAX and I want to have access to each specific channel in labview.
    i.e according to picture, I would like to have access  to n_Motor_InsRpm channel of E1_L0_1 (motor speed) in Labview, so I can set and transmit a speed value through CAN. Could that be possible with NI USB 8473 s? If yes, is there any simple example in Labview ?
    Thanks for your Help
    Charis
    Solved!
    Go to Solution.
    Attachments:
    CANdb.jpg ‏11 KB

    There are several ways to get database information without needing hardware. Here is one I did a while ago.
    https://decibel.ni.com/content/docs/DOC-39793
    Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
    If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

  • I can't get rid of a "Not Enough Storage" pop-up on my IPad2.  Can't close it and can't access settings.  Can't shut off the device either.  It's just locked up.  What can I do?

    How can I get rid of the "Not Enough Storage" pop-up on my IPad2?  It won't go away, I can't cancel it, I can't access settings, and I can turn off the IPad to reboot.  It is just locked up. 

    Reboot the device.
    Shut down the device by holding the sleep/wake button  and the home button at the same time.
    Hold them both until you see the screen go black. In some cases, you may need to keep holding them even after the red power off slider appears. If it does, just keep holding it.
    Wait until the white Apple logo appears.
    When this happens, you can let go - the iPhone is rebooting.

  • Scan AI from all channels in 6023 daq board

    I am trying to use single point scan for every Analog input channel in my 6023 board. I get a scan out of range error. I have tried multiple configurations. Basically it is only letting me scan 9 out of the 16 channels. I am scanning 0-5vdc signals. I have even tried the multiple channel scan with the same error.

    You will get a scan out of range error if your board is set for differential instead of single ended configuration. Find this property in MAX.

  • How can I reset my access passcode w/o having ever synced the device before? I don't remember it and now the ipad is "disabled" from too many failed attempts.

    How can I reset my access passcode without having ever synced the device before? I don't remember my passcode and now the ipad is "disabled" from too many failed attempts.

    You will need to reset the iPad back to factory defaults : iOS: Forgot passcode or device disabled
    What iTunes purchases that you can redownload for free from the stores will show in the Purchased tabs in the App Store and iTunes Store apps, and the Purchased tab in the iBookstore in the iBooks app

  • Error -50103 when I am trying to access two channels on USB 6366 board in the same time

    I am trying to use two DAQmx tasks attempting to access two channels from
    USB-6366 in the same time. But it gives me an error Error -50103. So I looked
    online and find out it says ' It is not possible to have multiple DAQmx tasks
    attempting to access the same physical device. '. So I am wandering how can
    collect data from my ai0 and ai1 channels in the same time? Here is my code,
    and please help me out. Thanks very much
    Attachments:
    error_-501013.vi ‏27 KB

    Simple - use a single task with multiple channels. Surely the answers in all of the related posts said that. The channel list is just dev1/ai0:1.

  • Possibility of Apple TV playing one Itunes Library while the computer plays a different library at the same time (Mac)

    The Apple TV is for my son's room to watch his videos, listen to music, etc. off his iTunes library I made for him on my Mac.  I want to be able to listen to my own library at the same time he has his. Apple TV only recognizes the current library open; unless I'm doing something wrong or the stars haven't aligned for me yet, is there a way to do this? I can't run two iTunes at the same time (wish I could). 
    *Note- to teach my son about computers, I bought an old green iMac which will be for his learning venture.  The iMac however does not have wifi (at least not yet).  Perhaps something for you Mac professionals can use to help me whip up a good setup, unfortunately the iMac is slow, not enough HD space, so I don't have the funds right now to open it up and do what can be done.  (If this helps)

    Hi All,
    Same issue here. Just upgraded (?) from the previous version of Apple TV, to the new Apple TV2. Like others here, my main problems seem to be with unreliable streaming from iTunes 10 on my PowerMac (Quad G5, Leopard OSX).
    My original AppleTV had no issues w/the wireless network, or synching w/my PowerMac.
    The network connection from the ATV2 are fine, and have no issues accessing the Apple Store (for movies, TV shows), or accessing Netflix. The access to the internet from my ATV2 is quite robust.
    My problems are with keeping a constant, reliable wireless connection to my PowerMac, via an Airport Extreme wireless router.
    I have tried multiple restarts, reboots, reset ATV2 to original settings, tried different wireless channels on the Airport Extreme, verified I have Home Sharing properly enabled in iTunes,etc, but no luck so far.
    What I'm seeing is when I access my iTunes on my computer, I can see my library, and then if I start to "shuffle songs" I may get 1 to 3 songs to play fine, but then the music stops, and I can no longer access the music/movies/etc in iTunes any longer. When I then go to my PowerMac, it has lost most bars of signal strength on the wireless network (although all other devices show strong signal strength), and I have to Turn AirPort Off, then Turn AirPort On and I then am reconnected to the wireless network with good signal.
    I then go back to the ATV2, connect to my iTunes, start my music, and then 1-2 songs later it again stops playing, and I go through this all over again.
    It seems as though there is something on the wireless network between the ATV2 and my PowerMac that causes it to lose connection, and I have to manually start again. The problem is that the connection is not robust, and only lasts a few minutes.
    Hope this gets solved soon.
    Regards
    Tom

  • Is it possible to store data collected in a form when the device is offline?

    I am trying to figure out if this is possible. I want to collect email addresses via an interactive PDF when offline.   ie. have a text field and submit button which would save the data to the pdf or an associated data file - txt/csv etc?  Is this possible or just wishful thinking?   as an alternative, is it possible to have the PDF send the data once it reaches an internet connection.
    I have a feeling I am asking too much of the multitalented PDF on this occasion.
    Can anyone help?

    Hi,
    If you are using FormsCentral Web form then, no.  You could use a FormsCentral PDF form; however, you will have to save each PDF form that people fill out locally (with a different filename) and then when you are online open each form and submit the responses.
          How to create and distribute a FormsCentral PDFform: http://forums.adobe.com/docs/DOC-2655
    Please try out the Formscentral PDF Form and see if it works for you.
    Thanks,
    Lucia

  • So is it possible to tell iSync to *only* make changes to the device

    I have been going through much agony trying to sync:
    My address book
    Google contacts
    iPod Touch
    Motorola L6
    (I wanted to even try my Blackberry but that may be asking too much)
    Everything seems to work more or less okay until I bring in the Motorola. When using iSync it seems to make modifications to my contacts on my computer by deleting phone numbers so that my contacts remain but have no data.
    So is there a way to sync so that my address book remains unmolested but only my phone is updated??

    hello,
    I'm having issues with isync too.
    I'm not quite clear how to change the syncing preferences: i.e. _who has authority?_, if I've made changes on my Ipod how do I make the changes go on the computer and not the computer rewrite the ipod contacts or calendar… and vice versa (I use both the tower and the laptop sited below and the ipod Touch).
    I've recently (last w-e) upgraded the system to 10.5.6, and took that opportunity to ditch entourage and migrate to Ical, mail and calendar (which is somehow traumatic enough, I've lost 6 months of calendar, but never mind that). Hoping that it would simplify my syncs (also because I used to try to sync my nokia 6110 Navigator and that was just catastrophic).
    so my question would be more :
    where and how do you changes the preferences for Isync? also I'm test-driving mobile-me and the same issue prevails if I've made changes say on The G5, i upload them to MobileMe, then I download them to the laptop. but if I'm on site, then it's the other way round (laptop> to g5, either via Ipod or via Mobile me)
    Basically I'm a bit confused, and i haven't found clear answers via Help in isync or on the apple website, if any syncing pro out there wants to chip in, that would be greatly appreciated!
    cheers, L.

  • Is it possible to display a picture over a video, while the video audio is still playing in the background?

    I am trying to put together a project, and I have a video with someone talking. What I want to do is, while that person is talking, have a picture shown. Is there any way to do this? Thank you so much for your help!

    yes. This is called the Cutaway Feature.
    Here is a good Tutorial. It works with both photos and videos.

  • Accessing a .csv file in vi while the data is written by 3rd party java applicaito​n

    Hi
    I have a requirement like below explained.
    A java applicaiton reads data from hardware and writes in a .csv file. This java applicaiton is triggered by a button click in Labview VI.
        --> cmd window   -- cmd /C java Client n
    the data will be read from hardware and written to the file per every second.
    In the labview vi, we are reading the .csv file simultaneously and plotting the graph. 
    The above operations need to happen simultaneously. 
    When we tried this, we are geeting the "File Not Found Excpetion(the file is used by other process) in java application.
    Can anyone help me why this might be happening in Labview. I tried this with a "c" applicaiton instead of Labview and it is working fine.
    Problem observed only with labivew.
    Regards
    Kris

    Naah, I said, that will never work.  But to my shock and (pleasant) surprise, it does!  Here is a snippet of a little routine I cobbled together using LabVIEW for both the Writer and the Reader.
    The Writer is on top.  It creates a Temp.txt file on my Temp directory, deletes it if it is already there, then opens it for writing.  There's a boolean "Done" flag that tells me when the Writer finishes, so I clear it before entering the Writing Loop.  Here, every half-second, I write the sequential numbers 0 .. 9, with a New Line to create a Text File of Lines.  When I'm finished, I close the file.
    Below this is the Reader Loop, designed to start after the Writer Loop has opened (and created) the file.  Here we open the same file in Read-Only mode.  The Reader Loop also goes 10 times (I could have built in a Stop condition, but this is only a Proof-of-Concept).  The loop is initialized with the current File Position (0) in a Shift Register.  The inner While Loop is a "Wait for Data to Appear", a loop which checks 10 times a second to see if the File Position has changed, exiting when it does (meaning the Writer has Written Something).  It then reads a line from the File (the Read Text function has its "Read Lines" property set) and displays it.
    When you run this, you will see the Reader's output, Line, count up, 0 .. 9, and then the program stops with no errors.  What fun!
    Bob Schor

  • Is it possible to include Arabic and English (or symbols) in the same sentence using InDesign CS6?

    Hi guys,
    The discussion title is pretty much the question.
    The difficulty I'm having is when I place a full stop at the end of an Arabic sentence or a closed bracket. If its continued with some more Arabic, the sentence will flow correctly. If not, then the English/punctation/symbol will move to one end of the sentence.
    Any help is appreciated!!
    Adil

    For example, in the image above the letter G on the third line of Arabic should be at the end of the sentence (reading from right to left). The "G" is a symbol which reads incorrectly otherwise.
    Is there any way for the letter to be in its correct place at the end of the sentence?
    I've also encountered this problem when trying to insert brackets and full stops, whereby the symbol always ends up at the far right of the sentence and often restructures the entire sentence.

  • When I try to access iPhoto it says "your application has is either in use by another application or has become unreadable." It recommends rebuilding the library, but says backup everything first. I can't get into it to back anything up"

    Is there anything I can do on my own to get this fixed? I have tried shutting down and restarting and it does not help.

    It recommends rebuilding the library, but says backup everything first. I can't get into it to back anything up"
    It is recommending backing up your entire system or have a current Time Machine Back up which includes  your iPhoto
    Then rebuild your iPhoto library as recommended:
    hold the Command and Option keys  down during the complete launch of iPhoto.

Maybe you are looking for

  • IPhone 4G syncing with iTunes The screen does not show my phone number and backs up to an old file from four months ago.

    iOS 6.0 was available this week, so I updated my iPhone 4S. At first it showed a long yellow (other bar) of 10GB, then took the entire day to update my photos (about 20,000 of them.  So I tried restoring the phone and the message on iTunes was that I

  • How do we unload a DLL with multiple different CLFN?

    Hi everybody, I'm currently designing an application that implements multiple functions of a DLL that I build. I have to call two functions one after the other to obtain the results of my functions.The first function (Read_Property) is doing many ope

  • Overwrite Standard Movement types with Z movement types in MI10

    Dear All, We have a requirement where we need to replace standard movement types 701 and 702 with Z movement types in transaction MI10. Would there be any exit or BADI in MI10 which would serve this purpose? We also tried cloning the transaction MI10

  • Download a file

    hi i i've the following problem, i need download i fiel into web dynpro application i'm using file download action but thios action request me a node with suply file and a component of type xstring but when i invoke the follow code i can't insert the

  • OEM 11g Grid Control installation for 10g R2 database

    Hi , I am new with oracle enterprise manager grid control , I have 3 questions , 1. My customer is using windows server 2008 with oracle 10g R2 database , can I install OEM 11g R2 to monitor all the 10g databases ? 2. I found only 32 bit installers f