Is it possible to add a UDF in Manufacturer and where I can add it ?

Hi,
I need to add an UDF in manufacturer, but i can't find the right place in UDF management tool window. Does anyone know this?
Thanks!
Lan
Edited by: ZHANGLAN on Aug 16, 2010 10:37 PM

Hello
You can add it by SDK (DI Object UserDefinedTables). You can add most of the tables to user defined fields, but take care, sometimes the GUI is not constructring it. (Example: table ITM1 - prices: you can add a UDF but you cannot see on the screen).
Dim oUserFieldsMD As SAPbobsCOM.UserFieldsMD
    Set oUserFieldsMD = oCompany.GetBusinessObject(oUserFields)
    oUserFieldsMD.TableName = "OMRC"
    oUserFieldsMD.Name = "AlbUDF"
    oUserFieldsMD.Description = "Albert UDF"
    lRetCode = oUserFieldsMD.Add
Regards
János

Similar Messages

  • I have a mac pro 1,1. I would like to know if its possible for me to upgrade the parts to where i can install osx mountain lion, or osx mavericks?

    I have a mac pro 1,1. I would like to know if its possible for me to upgrade the parts to where i can install osx mountain lion, or osx mavericks? I am currently adding more ram so it will have 32gb of ram, i have 2 250gb HDD but adding a 250gb SSD , and have a ATI Radeon HD 4870 512mb that i will most likely upgrade to an ATi Radeon HD 5570 1gb.

    The SSD will boot fast, but the real change is launching 10 programs in 10 seconds and being able to use them. (20 seconds for a few big suites).
    I would not add or upgrade to 32GB RAM. You can get 8 x 2GB for $100 on Amazon.
    Those 250GB HDD are "old" and slow and overdue to be replaced, reformat and use t o backup the system.
    Samsung 250GB SSD is down to $150 or so on Amazon also.
    The 5770 is gone, hard to find, EOL and over charged for when you do find one.
    you could look into how to use a PC 6870 or others.
    Or, you could hold out and wait for a refresh of Mac-Mini which can be just as fast or faster and run Mavericks.

  • How do i get to where i can add a network to get online

    how do i get to where i can add a network to get online

    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

  • Passphrase left blank but not taken to page where I can add WEP key per instructions?

    Hi... can anyone help me with this relatively simple question?
    Model: WVC54GCA
    Step "N" tells me to leave the "passphrase" field blank if I want to manually add the WEP key on the following screen. It says to hit next which will bring me to this page. However, I am not brought to a page where I can add the WEP key instead just to a page with a summary of settings.  I've tried resetting over 10 times and going through the directions again to see if I missed something, but it seems as if this software just has a bug that takes the user to the wrong page?  Does anyone know what I'm doing wrong?  I'm just trying to get to a page where I can manually add the WEP key. THank you very much.

    To setup your Camera rather than using the CD setup you should use it's web interface...
    1. Connect your Camera to a computer, click on the Start button >>> Settings >>> Control Panel >>> Network Connections - Right click on the icon for Local area connection and go to properties- On the 'General' tab select 'Internet Protocol TCP/IP' and click on the Properties button- Select 'Use the following IP address'- Provide IP Address - 192.168.1.5, Subnet Mask - 255.255.255.0...Click on Ok button to Save and Click on "Close" on main Properties window...
    2. Now open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.115.
    Use admin for both Username & Password in lower case...It should open your Camera set-up...
    3. Once you get to the set-up page you can follow this link to change the Camera Settings...While changing the Camera settings you have to make sure that the Wireless Settings(SSID/Network Name and WEP Key) are identical on both the devices(router and camera)...Also make sure to change the camera's default IP to match your network and Gateway Address should be your router's address...ex. Camera's IP Address : 192.168.1.115(assuming your router's default address is 192.168.1.1), Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1.
    4. After configuring the Camera you should disconnect it from the Computer and go into Local Area Connection TCP/IP Properties and set it back to Obtain IP Address Automatically...Disconnect the Camera from the computer and power cycle both the devices(Camera and Router)...Your camera should be configured...
    In case if you don't get the Camera set-up just leave it connected to your computer and reset it for 30 seconds...
    Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your Camera, wait for 30 seconds and re-connect the power cable...Follow Step 2, Step 3 & Step 4...

  • Want to add new material group plz where I can Add it

    Dear experts I want to add material group can you help where I can add it. The material groups are saved in table T0123 . This table is having view also can I enter the value in View or I have to go to SPRO to add new material group. plz help me as I am new. What is the right procedure to add material

    Hi Shilpa,
    u need to confugure the material group in SPRo
    path: sapro>logistic general->setting for key fieds>define material group
    T.code:OMSF 
    here click on new entries add ur 4 character material group with description as per ur requirement.
    Regards,
    Gopala.S

  • Why can't I add appointments to the calendar anymore?  I can add to my iPad and they show up and sync with iPhone but I can't add appointments directly to the iPhone calendar.

    Why can't I add appointments to the calendar anymore?  I can add to my iPad and they show up and sync with iPhone but I can't add appointments directly to the iPhone calendar.  I am on the latest OS version available for iPhone 5s.

    Hi,
    You cannot manually manage music with match turned on on your iOS device. If you want to manage music manually, you will need to turn off match on your iPhone.
    Jim

  • Is it possible to add a UDF in province/states table?

    Hi,
    Basically I would like to add a default tax code for each province/state, I think it should be a UDF in province table. But I can't find where I can add this UDF in UDF management form.
    Any idea?
    Thanks!
    Lan

    Hi.
    Do you know minor release 8.81 (unrestricted shipment) with new function called " tax code determination". The application proposes a tax code for each item line based on the rules you defined, but you can overwrite this proposal.
    This is my recommendation if you use 8.81 version
    1) Create UDF U_State in marketing document, assign FMS with query
    SELECT T0.[State] FROM CRD1 T0 WHERE T0.[CardCode] = $[$4.0.0]
    2) Define Tax Code Determination by condition with U_state value, then choose a default tax code of every state for every rule
    This helps you manage tax code by state
    Regards,
    TVSon

  • How to add a single check box and a label to a image in Muse?

    Hello!
    I need help with adding a check box with a label to the right of it. I know about the forms, and how you can add a check box there but i don't need all the other form options.

    Hi
    It is not possible to use only checkbox from a form at the moment. An alternate way could be inserting it using html, something like below
    <input type="checkbox" name="Muse" value="Muse"> A sample checkbox<br>
    I am not sure what exactly you are trying to achieve, but this will work  with Form tag only, like in the example here
    Tryit Editor v2.5
    Do let me know if you have any question.

  • PDF in readonly mode for one user, others can add info to it

    I have a user who is not able to add a digital signature to a PDF form.  She is using the same version that the file was created with and I and another person can add a digital signature.  Why is her version shown that it is in readonly mode?

    Hi,
    It could just be that the file's Read Only attribute is turned on. Have them right mouse click on the file and select Properties from the pop-up menu. On the Properties dialog make sure the "Read Only" checkbox is deselected.
    Steve

  • Trying to add missing UDF, but keep breaking my existing layout!

    Hi Everyone,
    I am working with an existing layout in Crystal Reports.
    Unfortunately a UDF that I require, and expect to be present, cannot be accessed. The UDF that I need to use is called 'U_INE_FreightR'.
    I figured that it may be possible to remove the table, and then re-add it, and thereby obtain access to the 'missing' UDF. Towards this end I click Database > Database Expert. I then remove the table, OPOR.
    Doing so gives the following warning.
    I then click on OK, and proceed regardless of the warning.
    Afterwards I re-add the required, OPOR, table (after making a relevant database connection).
    Following this procedure produces the following error.
    I have no choice but to click on OK here, so that is what I did.
    Now when I look in the table for the required UDF it is present...
    Following on I then save the modified form back into Business One (Add-Ins > SAP Business One > Save).
    All appears to be well, however when I then use the layout in Business One there is a lot of information missing. I suspect that the errors with regard to missing content in the layout relate back to the error message "There are fields in the report from this file. Continue?".
    I am now at a complete loss regarding how to make the extra UDF available in the layout, without 'breaking' the layout, and losing content.
    If anybody can advice me on how to add the UDF without breaking my layout it will be greatly appreciated.
    Kind Regards,
    David

    Hi Saado,
    I have attempted your technique, however unfortunately I am getting stuck. Here are the steps that I follow -
    1). Click on Database menu
    2). Click on Verify Database
    3). Enter the password into the OLE DB (ADO) dialog box - as shown below -
    4). Click on Finish
    I am then presented with the screen below, for which I do not know the correct values to enter -
    If I simply click on OK I am met with the following error message -
    I then click on OK, and follow this by clicking on the close (red cross) button.
    The message below is shown -
    I click on OK, and am presented with a Map Fields dialog as shown below -
    I then click on OK, and receive the message 'The database is now up to date'. However I also receive the error message shown below -
    I click OK, and am then shown the Formula Workshop, as follows -
    Can you please provide further advice? I suspect that my mappings are out, but I don't have any idea about how to fix them!
    Any further assistance will be greatly appreciated.
    Kind Regards,
    David

  • Is there any way to add a toggled checkbox to pages like you can in numbers. Possibly Applescript?

    In numbers you can add a checkbox that users can toggle off and on. This feature is not available in Pages. Can numbers features/tables be imported into pages or possibly added via Applescript? I haven't found a way to do this.

    And you won't. Pages is not a Word clone, and does not support inline forms by any means, including AppleScript. LibreOffice does support all manner of controls for inline use — including your checkbox. Chapter 15 in the LibreOffice Writer PDF manual.

  • I already have creative cloud Photography plan and just want to add dreamweaver, is this possible?  Alternatively, I have tried purchasing the Complete - For CS Customers but it asks me to contact customer support and then sends me through to the forums!!

    I already have creative cloud Photography plan and just want to add dreamweaver, is this possible?  Alternatively, I have tried purchasing the Complete — For CS Customers but it asks me to contact customer support and then sends me through to the forums!!

    yes.
    contact adobe support by clicking here and, when available, click 'still need help', https://helpx.adobe.com/contact.html

  • How do I add a UDF in Recurring Postings?

    Hi All,
    is there a way to add a UDF in Recurring Postings Form?
    Thanks,
    Vangelis

    Hi Vangelis,
    you can do it when you add the field via DIAPI.
    i post here a simple vb6 sample.
    to call the procedure i posted use this
    AddUserDefinedFields "ORCR", "TEST", "TEST", SAPbobsCOM.db_Alpha, SAPbobsCOM.st_None, 100, 100
    Public Sub AddUserDefinedFields(pTableName As String, pName As String, pDescription As String, pType As String, _
        pSubType As String, pSize As Long, pEditSize As Long)
    On Error GoTo Err_Handling
        Dim oUserFieldsMD As SAPbobsCOM.UserFieldsMD
        Dim oValidValuesMD As SAPbobsCOM.ValidValuesMD
        Dim oRecordSet As SAPbobsCOM.Recordset
        Dim lRetCode As Long
        Dim sQuery As String
        Dim sTmpTableName
        Set oRecordSet = oCompany.GetBusinessObject(BoRecordset)
        Set oUserFieldsMD = oCompany.GetBusinessObject(oUserFields)
        sTmpTableName = pTableName
        sQuery = "Select tableid from cufd where aliasid = '" & pName & "' and tableid ='" & pTableName & "'"
        oRecordSet.DoQuery (sQuery)
        If oRecordSet.Fields(0).Value <> pTableName Then
            Set oRecordSet = Nothing
            oUserFieldsMD.TableName = sTmpTableName
            oUserFieldsMD.Name = pName
            oUserFieldsMD.Description = pDescription
            oUserFieldsMD.Type = pType
            oUserFieldsMD.SubType = pSubType
            oUserFieldsMD.Size = pSize
            oUserFieldsMD.EditSize = pEditSize
            lRetCode = oUserFieldsMD.Add
            If lRetCode <> 0 Then
                sNotAddedUDF = sNotAddedUDF & pName & "-" & pTableName & ", "
                'oCompany.GetLastError lErrCode, sErrMsg
                'MsgBox lErrCode & ", " & sErrMsg
            Else
                sAddedUDF = sAddedUDF & pName & ", "
            End If
        Else
            sNotAddedUDF = sNotAddedUDF & pName & "-" & pTableName & ", "
        End If
        Set oUserFieldsMD = Nothing
        Set oRecordSet = Nothing
        Set oValidValuesMD = Nothing
    Exit_Sub:
    Exit Sub
    Err_Handling:
    End Sub
    use ORCR to add it to the header from Recurring Postings Form
    use RCR1 to add a line UDF
    i hope it helps - if you're happy reward points
    regards
    David

  • Add a UDF on OSHP table

    Hi ,
    How can i add an UDF in the OSHP Table?
    Thanks .
    Edited by: Laurent VIALARET on May 25, 2009 2:14 PM

    Dear Laurent,
       UDF cant be added in the OSHP(Delivery Type)
    Regards
    Jambulingam.P

  • Is it possible to write a combined add-on for Firefox (desktop) and Firefox (Android and iPhone)?

    Dear Mozilla-Support-Team,
    I am thinking about a new webservice based on an add-on for Mozilla (and other Internet Browsers).
    In general, is it possible to write a combined add-on for Firefox (desktop) and Firefox (Android and iPhone)? Or do both Mozilla-worlds (desktop / mobile) differ and therefore require to write seperate add-ons (just Desktopn AND mobile or Desktop AND Android AND iPhone).
    Thank you very much for your help!

    It can be the same extension though you will likely need to write different code for FxAndroid and Fx Desktop.
    https://addons.mozilla.org/en-US/developers/docs/getting-started
    https://developer.mozilla.org/en-US/Add-ons/Firefox_for_Android
    https://developer.mozilla.org/en-US/Add-ons/SDK
    In the future you should ask questions on on of the developer lists. https://groups.google.com/forum/#!forum/mozilla-labs-jetpack

Maybe you are looking for