Is it possible to add users as "Write Only" participants.

It is possible to add users to a workspace as a Workspace Reviewer that gives the user Read Only rights. Is there any way to add users to a workspace as Write Only participants? In this use case participants would be able to upload content but not download content. The idea is to use a workspace as a dropbox for multiple participants where each Write Only participant cannot read the other Write Only participant's content.

Did you check the default workspace participant roles, if not have a look at it. User who got ability to upload content will be able to download content as well. I'm not aware of any ways by which we can restrict this.
ACL's can be used to selectively hide folders in a workspace. Have a look at the following documentation for setting folder level ACL's
https://beehiveonline.oracle.com/External_06_howto.html
Thanks,
Jereen

Similar Messages

  • In SharePoint 2013 navigation, is it possible to add a custom link only to the left-hand menu without getting it in to the top menu dropdown?

    If I want to add a custom link to the left-hand navigation menu In a SharePoint 2013 sub-site, it can be done by visiting
    Site Settings à Navigation section and adding the link under
    Structural Navigation: Editing and Sorting section. However, this will automatically add a matching link to the top menu as a dropdown.
    (Note that Global Navigation is set to “Display the same navigation items as the parent site” where “Parent is using Structural Navigation.” and Current Navigation is set to “Structural Navigation:
    Display only the navigation items below the current site”)
    Is there a way to just add a custom link only to the left-hand menu without getting it in to the top menu dropdown?

    Hi Asanka,
     Please refer the below link which may help you to resolve your problem.
    http://blog.navantis.com/configuring-sharepoint-2013-navigation-to-span-site-collections/
    If its not helping you please let us know
    Sekar - Our life is short, so help others to grow
    Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever
    you see a reply being an answer to the question of the thread, click "Mark As Answer

  • Is combining of attributes possible in add user by attribute section

    The business users have identified when creating user groups they need to identify a specific set of users to
    place in the user groups. The idea was to take custom attribute as a filtering
    method. It appears that when using the "ADD BY ATTRIBUTE" feature in Ilearning
    it treats the attributes with the condition of "OR" and not "AND" i.e ( see
    supporting document) we two attributes city code and job code. We need to be
    able for ilearning to say , include all users that have a city code 'X' AND and
    job code 'Y'. Currently we are experiencing the application utilizing an OR
    statment city code 'X' OR job code 'Y'.
    Is this intended functionality?
    If so is there a upgrade realease to include an AND statement?
    Is there a current solution to this issue , if not has there been a proposed one or what have
    other companies done as well?

    User Group and Enrollment conditions currently only support OR conditions and this is intended functionality. There is an existing enhancement request to support AND functionality.
    One typical workaround today is to create a single custom attribute that stores the combinations

  • Lock the table by user with grant only for select

    Hallo.
    It is possible that the user has rights only for SELECT, do not lock the table? Now, where do "SELECT * FROM table FOR UPDATE", does not make the change, but it locks the entire table, and another user to get into it.
    Thanks

    And here is the "evidence" ;)
    SQL> select * from v$version ;
    BANNER
    Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
    PL/SQL Release 10.2.0.4.0 - Production
    CORE    10.2.0.4.0      Production
    TNS for Solaris: Version 10.2.0.4.0 - Production
    NLSRTL Version 10.2.0.4.0 - Production
    SQL> create user u1 identified by u1 ;
    User created.
    SQL> grant connect to u1 ;
    Grant succeeded.
    SQL> connect hr/hr
    Connected.
    SQL> create or replace view v_t1 as select username, user_id, created from t1 group by username, use
    r_id, created with read only ;
    View created.
    SQL> grant select on v_t1 to u1 ;
    Grant succeeded.
    SQL> connect u1/u1
    Connected.
    SQL> select * from hr.v_t1 where rownum = 1 for update ;
    select * from hr.v_t1 where rownum = 1 for update
    ERROR at line 1:
    ORA-02014: cannot select FOR UPDATE from view with DISTINCT, GROUP BY, etc.
    SQL> select * from hr.v_t1 where rownum = 1
      2  ;
    USERNAME                          USER_ID CREATED
    AK                                     36 08-MAY-00

  • Is it possible to add a user using the RESTful Web Services SDK

    Others have asked before about user management features in the RESTful Web Services SDK.  However I can find no answers or links which provide an answer to the question 'Is it possible to add a user using the BI 4.1 SP2 RESTful Web Services SDK'?
    Any help would be appreciated.
    Regards,
    Steve

    Hi Steve
    Unfortunately, not possible. The BI RESTful can only get "stuff" that is already there. I suppose this would fall under some sort of "Object Creation" API and that is not there. Yet. Rumors abound, but nothing firm. Just as a BTW.; the Business Intelligence platform RESTful Web Service Developer Guide 4.1 is here:
    http://help.sap.com/businessobject/product_guides/sbo41/en/sbo41_bip_rest_ws_en.pdf
    SAP Web Intelligence RESTful web service SDK User Guide, SAP BusinessObjects Business Intelligence platform 4.1
    SAP Crystal Reports RESTful web services - SAP Crystal Reports RESTful web services
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow us on Twitter

  • Is it possible to add a user or license for just one app?

    I have a complete Adobe Creative Cloud license. Is it possible to add a user or license for just one app? What are the monthly costs?

    Cloud Plans https://creative.adobe.com/plans
    -and subscription terms http://www.adobe.com/misc/subscription_terms.html

  • Is it possible to add a user in Win NT using Java?

    Hi,
    Is it possible to add a new user to Win NT using Java, assuming that the user running the application is an administrator?
    If it can't be done in Java, can anyone point me in the right direction to research this?
    I appreciate your help.
    Regards,
    Liam.

    Okay, I might have a solution already.
    I'm going to try using JIntegra from www.linar.com as a COM bridge, to access the Win32 API function NetAddUser.
    Regards,
    Liam.

  • Is it possible to add buttons for user feed back in Bobj WEBI report?

    Dear all,
    I am an ABAP Web dynpro developer. 
    As part of the workflow, i am displaying  a BOBJ Webi Report to the users.
    The requirement is to allow users Aapprove/Reject the data in the report.
    Is it possible to have user input or any buttons in the Webi Report?
    If yes, How to achieve this ? Please help.
    Thanks,
    Vamshi

    There is discussion option as an out of the box feature. Check this: BI launch pad 4.0: Participate in a discussion about a document

  • Is it possible to add PERNR field to MIGO or MB1A transaction screens?

    Hi,
    Ours is a service industry with @ 10000 employees and we have implemented SAP with MM & HR module. We issue uniforms to all the employees when they join (new Joinee) and again once in January every year as reissuance. We intend to keep size information in employee masters in HR along with station code, designation, department and cost centers.
    At present we are using two fields goods recipient and unloading point to mention employee code and type of issue (new joinee or reissuance). This is because employee code (PERNR) field is not there in MIGO_GI screen or MB1A screen.
    Is it possible to add PERNR field to any of these transaction screens?
    If added then we can fetch the relevant information about issuance of information along with station code, designation, department in Z report.
    If possible, then how it can be done?
    Thanks in advance,
    Satish

    Hi ,
    as i understand we can add new fields in a transaction through user exit /field exit. so please discuss with your ABAP consultant & try to find out all the exit available for MIGO/ MB1A. then you have to decide which one will suit you. here you have to consider some factors like whether you need to enter values in the field or the field needs to fatch any value from any other table & should populate here.
    the ABAPer can then write the code & add your required logic here.
    i am not very good in this subject. just tried to share what ever i knew.
    regards,
    anubhab

  • Is it possible to access user account in an air android app ?

    Is it possible to access user account in an air android app in as3 ?
    The only thing I've found on internet is that one has to add to its manifest permissions to acccess account :
    <uses-permission android:name="android.permission.GET_ACCOUNTS" />
    and this documentation for native android coding :
    http://developer.android.com/training/id-auth/identify.html
    thanks for any help.

    There is no API in the AIR runtime to get user's accounts.
    But you may write an ANE to get the same.

  • Can it be possible that a user insert data by a form and then create a PFD?

    Can it be possible that a user insert data by a form, then store the data in the Data Base and finally create a PFD?
    If this is possible with BI Publisher, what do i have to do to link the form with the BIPublisher interface?
    Regards

    Hi
    If you just have a PDF form and do not need to pre populate data then all you need do is:
    1. Add a submit button to the PDF - you can use the full Adobe product or a BIP API
    2. Load the PDF as a template with a dummy data source.
    The user can then run the "report" as usual. When they have completed the form they can hit the Sumit button on the form. Adobe will then scrape the data out of the form in an XML format and post it to the URL you added. At the other end of the URL you need a servlet to accept and process the XML data.
    If you need to prepopulate the form you can attach a datasource to the PDF template but ensure the fields are preserved after running the form for the user through the config options.
    BIP does have APIs to populate drop lists, etc but these are not exposed thru through the BIP UI.
    I'll try and write this up for the blog and OTN soon
    Regards
    Tim

  • In contacts there is the possibility to add a new event, as the birthdays, but they do not appear in iCal. Is there any way to make that possible? It is normal to have a person with his birthday, anniversary and others key dates you want to link to him.

    In contacts there is the possibility to add a new event, as the birthdays, but they do not appear in iCal. Is there any way to make that possible? It is normal to have a person with his birthday, anniversary and others key dates you want to link to such person, but the only one shows up is the birthday. How to be able to show all those dates linked to people in the agenda in the iCal?
    Thanks

    Hi,
    I sugggest you try my application, Dates to iCal. It is shareware with a 2 week trial period.
    Dates to iCal 2 is a replacement for Apple's birthday calendar for iCal. It has a range of features to allow the user to choose what, and what not, to sync to iCal from Address Book.
    As well as automatically syncing birthday dates from Address Book, Dates to iCal 2 can sync anniversary and custom dates. It can set up to five alarms for each date in iCal and can also set different alarms for birthdays and anniversaries. It allows the option of only syncing from one Address Book group. This application also allows for the titles of the events sent to iCal to be modified to the user's preference.
    Best wishes
    John M
    As I sell software on my site and ask for donations, the Apple Support Communities Use Agreement requires that I state that I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • Active Directory and 10.8 Server: Can't add users

    I would be most appreciative of any help you folks can give a Mac user at a predominantly Windows/MS/Exchange Tier I university.
    I bought a MacMini to act as the departmental File server to allow a granular level of permissions on folders for faculty, administration, residents and students. The students and residents rotate in yearly or for 2 years at a time.
    The problem has become when I try and add users from the IT ActiveDirectory domain. The IT folks set-up the DNS, gave it a static IP address etc. all correctly.
    The MacMini was also bound to AD in Sys Prefs > Users & Groups > Login Options > Network Account Server to the domain.
    There are over 200,000 users in the university system. When I try and search for a user in the Users sidebar it pulls up a completely random list of users and lists "500+ users" next to the buttons. When I try and search for a user, invariably it fails. Furthermore, there is the term "Not Allowed" next to the names of all the random AD users.
    What am I doing wrong?
    The Sys Admin guy I spoke with said the only way he could figure it out was to go to Groups sidebar, create a new group and add the user that way.
    The whole premise for this is to allow the users the same login ID and PWD they do for every other service on campus. That's it. I then want to be able to control folder permissions directly on the MacMini. Is this possible or do I need to use Open Directory in conjunction with AD?
    Any help for this formerly Apple Power User would be greatly appreciated.
    Thanks folks.

    Hi
    This is a Jabber-ism I think.
    You get this if you are using UDS and the users you are trying to add aren't CUPS-enabled.
    You probably also get it if the users are from LDAP and aren't CUPS enabled.
    CUPC by comparison allows manual contact creation as well as adding of non CUPS people.
    Regards
    Aaron

  • Is it possible to add a hdmi port? Hp envy 23-d010ea all-in-one

    I wanted to get a Ps4 soon but i dont have a tv, and on my computer i dont have a hdmi port. i see on other models of my computer they have it for example on the 23-d052 its like this 
    Where as on my one is like this
    so that part is just an empty space. i was wondering if it were possible to add the hdmi port or if there was a way i could still play the ps4 on my computer?
    This question was solved.
    View Solution.

    The USB 3.0 to HDMI adapter referenced above, is only designed to connect to a USB port on you computer and output an HDMI signal to an HDTV or monitor. It will not allow you to connect the HDMI output of a game console to your computer.
    It may be possible to purchase all the components necessary to add that functionality to your computer, however the cost would far exceed the price of a new monitor or HDTV. Please purchase an inexpensive HDTV or monitor to use with your PlayStation.
    If you have any further questions, please don't hesitate to ask.
    Please click the White KUDOS "Thumbs Up" to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • Add User to Group Behavior

    Hi all
    I found
    this post that explains the same issue I'm having, but the marked answer isn't relevant to my environment. I've built a user creation runbook, using 2012 R2 and this
    Active Directory Integration Pack. Everything works properly, except I'm getting strange security log events when using the Add User to Group activity.
    In one of the tests, I added a single user that was being created to about 100 different groups. Let's say one group has 50 members. When the user gets added to that group, the security audit shows that 50 users were removed from the group, and then those
    50 users were added back plus my new user. It shows this activity for every group that the user was added to. I get the following two actions for every member of the group:
    Member '-' was removed from 'Domain\Group' by 'Domain\User' on...
    Member 'DN of Member' was added to 'Domain\Group'...
    This is a problem because it makes our audit reports and notifications worthless since we'd have to read through all the noise to see an actual anomaly. I'm also concerned that if users are actually being removed and re-added to those groups, that there
    could be some consequences of that that we aren't seeing yet (i.e. application access interruptions, or what if the connection to AD is lost after removing the users but before adding them back in). Although I should say I'm not convinced that the users are
    actually being removed because as you can see above, no member information is recorded on the removal, and all the removals and additions have the same exact time stamp meaning they occurred within 1 second, which seems pretty fast given that some of our groups
    are large.
    Is this the intended behavior of the Add User to Group activity? If so, is there a workaround I can use to avoid this behavior? The next thing I'll try is using PowerShell to add the user to the group, but this option isn't ideal since the runbook will be
    managed by users who are not that familiar with scripting, so I'd like the solution to contain as little as possible.
    Thanks

    Hi,
    the issue of the AD IP 7.0 is reported here 
    http://social.technet.microsoft.com/Forums/de-DE/eef9cdda-774f-4b95-bd89-aa3f86feee9b/ad-integration-pack-add-user-to-group-activity-problem?forum=scoscip
    Try the up-to-date Version 7.2
    http://www.sc-orchestrator.eu/index.php/scoblog/115-updated-system-center-2012-r2-orchestrator-integration-packs-available
    Regards,
    Stefan
    www.sc-orchestrator.eu ,
    Blog sc-orchestrator.eu

Maybe you are looking for