Is it possible to change page content based on 'case' or 'workflow' state (or similar method)

Is it possible to change the page content if the customer revisits the page?
I have an approval page which the customer completes - when they submit the form with their answers a case is generated and they are taken to a submission successful page.
As they can revisit this page through their account details I want the page to change to say they have already submitted their approval.
Is there a method within business catalyst to achieve this?
Can I extend the CRM database to use a flag for the case and then set / check the state of that flag when the page is visited again?
Thanks in advance.
Gavin

Ok I have figured out I can use {module_url,variable} to achieve this and pass in the case status to the page.
Is there a way of changing a case status when the approval form is submitted?
Gavin

Similar Messages

  • Changing page title based on a value

    Just curious if it is possible to change the page title based on whether or not an item is null. If it is how?
    For example page title:
    If PX_ID is not null, the page title is View/Edit PRODUCTS.
    and
    If PX_ID is null, the page title is Add PRODUCTS.
    I know its no big deal... its not that hard to copy the page.
    Thanks ,
    Derek

    Set your page title to something using the &P101_PAGE_ITEM. syntax.
    Then you can use whatever logic you need to devise your P101_PAGE_ITEM.
    Ben

  • Change page header based on group being printed

    I have a report that is grouping by two fields, field A & B.  When the report is printing group A I would like the page header to be "Group A Header" when the report is printing the groups for field B I would like the page header to be "Group B Header".  I can't seem to find a way to change the header based on which group is being printed.  If I do "If GroupNumber = 1 Then "Group A Header"" it prints "Group A Header for the first group and the first record of the second field group.
    Basically what I am trying to do is create a report that has a chart that is un-grouped followed by charts that are grouped.  I've accomplished this by creating a formula that is always true for the un-grouped chart and adding it as a group.  below that I have a field group for the charts I want filtered by group.   When the un-grouped charts are printed I want the page header to reflect that, when the grouped charts are printed I want the page header to contain the group name.

    Not enough info. Try CR 2008 it has more control over printing.

  • CATS - It is possible to change the content of the Rejection e-mail?

    Hi all,
    we are in ECC 6.0 and have implemented CATS.
    Do you know if it is possible (and how!) to change the content of the e-mail that is sent to the employee in case of CATS rejection?
    Thanks and regards,
    Cristiana

    Hello, nice idea!
    I did figure out that the program use text elements, however, one is not allowed to change them. I then raised an OSS note and SAP raplied that I couldn't change the text elements - I really don't like the email that is sent from CATS rejection!
    I really ike the sound of your idea. I am not familiar with translations though. Would you be able to detail it a bit more about how to translate a text element?
    When I get to the text element screen, if i follow menu path Goto > Translation, a screen pops up asking me to chose a Target Language. What should I do then? Select the target language to EN (the original language is EN) ? And then, how do I make sure that the program uses the translated text?
    Thanks a lot for your help!
    Cheers,
    Cristiana

  • Change page content

    Hi,
    If I've updated the page content, do I have to publish the site again for it to be updated?

    Yes.

  • Is it possible to copy page content from one book to another?

    Have 2 books in a single Aperture project.
    Need to copy one page content from book 1 to an empty page of book 2.
    Tried all my best, but couldn't manage.
    Anybody please advice.

    At the time the "copy content" only works between pages in the same book. Even if you drag the involved images to the new book, copying content between the two books don't work. This I believe could be a bug and do hope it is corrected soon.
    Regards
    Paul K

  • Using a menu to change page content

    I have an immediate auto-submit menu with a value-change event listener. When you change selections the value-change handler loads the appropriate data model. All of the detail fields on the page are bound to the data model. So when you have apple selected you get details about apples; when you pick orange the details are supposed to change.
    Immediate bypasses the validation which is desirable. The event hander grabs the right model just as expected. It then calls renderResponse to make sure the incoming details are not written over top of the newly selected model. That works fine but the new data is NOT displayed. If you leave the page and then come back all is well: you see "orange" selected and "orange" details.
    When I swap data models why aren't the new data values displayed? Somehow the framework is holding on to the old values. I know the old data model is no longer available and the selected data model is there and sitting in the managed session bean that all of the detail fields are bound to.

    I might be facing a similar problem. I have a menu that I would like use to control an
    input field. As the use changes the menu, I would like the rendering of th input
    field to be changed. Below is the code I am trying which does not work.
    It sounds like you did what I was trying to do.. Could you post some code.
    Thx.
    <h:selectOneMenu value="#{upload.investigator}" onclick="submit()" action="#{upload.change}" >
    <f:selectItems value="#{upload.investigators}"/>
    </h:selectOneMenu>
    <h:panelGroup >
    <h:inputText value ="#{upload.investigator}"
    rendered="#{upload.investigator =='New'}" />
    <h:commandButton value="Add"
    action="#{upload.addinvestigator}"
    rendered="#{upload.investigator =='New'}/>
    </h:panelGroup>

  • Alternate home page versions based on visitor region

    Is it possible to display alternate content based on visitor criteria? For example, if people are viewing my site from out of state, they'd see a different version of my page. Or, if someone has already been to my site, they'd see a "welcome back" version of the page.

    For example, if people are viewing my site from out of state, they'd see a different version of my page.
    With that example I would say no it's not possible.  It is possible to accurately drill down someone's location to a country.  You would need to install software to read the individual's IP and then send them to different pages depending on where they come in.  Lot's of major companies do that.
    Unfortunately, when you get inside the countries and go to the state level it's not as accurate.  For instance, in some places the routing servers may be in the next state over, let's say New Jersey residents might contact to their ISP which runs the line from Pennsylvania or New York.  Or if someone is connecting from a mobile device, the location can be gathered from their GPS which again could be a different state to what you are targeting although you may be interested in this user as well.
    The "welcome back" is something different. If you have a login on your site and you set cookies, you just check if the cookie exists and if it does, log the user in and display a message.  If not, prompt them for a box to log in.  Kind of like how this forum works.

  • Possible to change the variables in the program permanently?

    Is it possible to change the content of the variable in the MIDlet application??

    Hello,
    As there is no beans mechanism in J2ME, here is what you can do. You can save values into RMS and then fetch them from there when you load the MIDlet.
    Regards,
    Petteri
    Nokia Corp.

  • Change Template Logo based on the selected values...

    Hi All,
    It is possible to change the logo based on the values or company I've selected. Its for invoice template since we have multiple client. The management want to change logo every time they select specific company invoice. Thanks
    Whel

    yes..you can achieve with one conditional formatting report..I am Talking about OBIEE reports only not publisher thing
    1)upload all your images in /Images folder of server
    2)create one Report with Company name column,click edit Column properties--> conditional formatting--->add conditions as required like Company name ='Oracle'-->In format window select Image and select Custom Image -->fmap:images/oracle.jpg-->in default select "Image only" option-->repeat for all images-->Make this company column as "is prompted" -->save the Report-->put this report on the dash board where that company prompt is available...and see results :).I implemented it successfully

  • Changing ERS & GR based IV flags

    SAP Experts,
    Is it possible to change the GR based IV and ERS flags on a schedule agreement after it has been released against? The problem we have is AP is forced to enter invoice only after GR has been performed and we would like to change that however the fields in the schedule agreement are grayed out. The only time it allows us change is before any materials have been released against it.
    Is there a supported way to change those fields after they have been released against?
    thanks,

    Hi,
    If the ERS functionality is used, it is logical that SAP will recommend the setting of GR-based IV indicator as in this particular case, invoices will be generated based upon GR posting.
    Cheers,
    HT

  • WM-RF: Changing the content of an error message

    Hi,
    may be someone could help me...
    when a user is in a queue, but there are no further TOs in this queue, a message / error is shown:
    "The system could not find transfer order for execution".
    Is it possible to change the content of this message unproblematicly? Where can I change it? Screen-Management??
    Thank you!
    Best regards

    I didnt find the right message number by clicking on it. but i found the error message in se91....
    too easy
    thx a lot...

  • Change BSEG contents in RGGBR000

    Hello,
    I'm using a Z* copy of RGGBR000, and in a customized FORM i'm changing the value of BSEG-ZUONR ( Assignment number ) but the change has no efects. The field maintains the old value.
    Does anybody knows if it's possible to change BSEG contents in an exit FORM ? And what's necessary to do to that change to have efects ?
    Thanks
    Paulo Sousa

    Paulo,
    you misunderstand the concept: BEXCLUDE has to be empty for fields which you want to change. If you want to change ZUONR, than it has to be empty for ZUONR. It is irrelevant what is in BUKRS.
    pls. follow the steps:
    1. create a substitution for BSEG-ZUONR (tcode: GGB1) with subst. exit, call the exit from the subst.
    2. activate it for the company code (tcode: OBBH)
    3. test, test, test ...
    ec

  • I have 5 html pages that share a common header, footer, and sidebar. how do i use my nav bar to change the content of the body without duplicating a lot of code?

    i have 5 html pages that share a common header, footer, and sidebar. how do i use my nav bar to change the content of the body without duplicating a lot of code? thank you!

    i inherited the website. It’s for a non-profit and is not very
    sophisticated, and neither am I in webdesign. It currently has multiple
    pages that are identical except for that body section, so whenever i change
    the navigation (in the sidebar) I have to update every html page.  I want
    to have one basic page, and just call in the different body content based
    on the link the user selects from the nav bar. How can i do that using a
    script? i am using Dreamweaver.
    ~ in love and light ~
    Jeannie
    On Sat, Feb 7, 2015 at 4:07 AM, Ben Pleysier <[email protected]>

  • Is it possible to change the spell check dictionary in "pages for iPad" from Spanish to UK English?  The app was downloaded in Spain.

    Is it possible to change the spell check dictionary in “pages for iPad” from Spanish to UK English?  The app was purchased in Spain and I am living in spain temporarily

    Spell checking should be based on the keyboard layout that you've got selected in Settings > General > Keyboard > International Keyboards - if you have an English 'UK keyboard' selected then the spell checking should be English

Maybe you are looking for