Is it possible to change the tab index color?

I was wondering if it was possible to change the highlight
color of tabbed elements, specifically buttons? When tabbed to,
buttons have a yellow rectangle highlight by default. Is it
possible to change this color and if so how?
Take care,
shayne

Thanks.
Geoff - Changing the color in Full Screen with Menus has no effect. The dark gray is still there after a close CS4 and open.
Thanks for the alternative approach. The Faststone screengrab process is quicker. It's just a nuisance you can't change the color or thickness of the grabbing lines.
Rob - which background? When I right click on the CS4 background - the working area with nothing in it - I get no context menu. I get nothing in fact.
I am surprised that the Prefernces/Interface changes don't work but they don't seem to.
I have done abou 160 screen grabs and probably have another 3-400 to do.
David

Similar Messages

How do I change the tab background color in Firefox 4?

I just upgraded to Firefox 4. Tabs are now fine black font on dark grey background -- very hard to read. How do I change the tab background color?
I have searched and the closest I can come is some instructions for modifying .css files, and it is not clear that those instructions will impact the tab background color.
Thanks in advance for your help.

Similar question asked by TH received another response.
Here is the address of that question and answer:
https://support.mozilla.com/en-US/questions/804464?s=change+tab+color+firefox+4&as=s
I like the solution recommended there.
Added information - after several days experience, I notice that some tabs occasionally revert to the original dark grey. So I am still looking for a better solution, ideally within Firefox rather than via add on. This seems like a basic setting for the browser that should be easy to change, rather than something so complex that I need an add on to change it. Or just build it without such a dark grey background to begin with and I would not need to change it.

How do you change the tab outline color

How do you change the tab outline color? I wish to use a black style on my test program but the tab features have a white edge on the top and left sides to try and give a 3d look. I've tried playing with the windows style but had no success. Does anyone know how to remove this or change the color? The closest I have got so far is setting a windows 7 basic theme which removes the 3d look. This does however give a white background on the tab pages which I cannot find a way of changing in either CVI or windows. Any suggestions?
Thanks
Solved!
Go to Solution.

Chris,
Unfortunately, this border is only customizable through the Windows theme. Changing the theme to the basic is likely going to be the closest to what you are looking for without creating a custom theme for Windows.
National Instruments
Product Support Engineer

Is it possible to change the selectedTab text color in SPRY Tabs?

Was working with SPRY tabs and the client would like the font color to change to white on roll over and select.
Is this possible through simply adding a single line of code to the css file of the SPRY file under
.TabbedPanelsTabSelected {
    height: 46px;
    width: 168px;
    background-color: #a7b9c3;
    color: #f7f7f7;
as you can see I already attempted to change the color and wasn't able to achieve the results on
http://ebnerproductions.com/index22.html
If it is possible, awesome, if not, I will replace with rollover images to get the desired result.
Adam Ebner
Thank you again to everyone in the forum as you have all helped me big time in the last couple of days!!!!!

I've gone through the coding now for a couple of days and still cannot get the font color to change on select.
I tried to inserted the recommended
<style>
.TabbedPanelsTabSelected,
.TabbedPanelsTabHover {
     color: #FFF;
</style>
coding that was offered earlier, and it did nothing....
here is the CSS for my tabbed panels... PLEASE LET ME KNOW WHAT I HAVE DONE WRONG, OR FORGOT!!!!
site is ... http://ebnerproductions.com/index22.html
Here is the Spry css ....
@charset "UTF-8";
/* SpryTabbedPanels.css - version 0.4 - Spry Pre-Release 1.6.1 */
/* Copyright (c) 2006. Adobe Systems Incorporated. All rights reserved. */
/* Horizontal Tabbed Panels
* The default style for a TabbedPanels widget places all tab buttons
* (left aligned) above the content panel.
/* This is the selector for the main TabbedPanels container. For our
* default style, this container does not contribute anything visually,
* but it is floated left to make sure that any floating or clearing done
* with any of its child elements are contained completely within the
* TabbedPanels container, to minimize any impact or undesireable
* interaction with other floated elements on the page that may be used
* for layout.
* If you want to constrain the width of the TabbedPanels widget, set a
* width on the TabbedPanels container. By default, the TabbedPanels widget
* expands horizontally to fill up available space.
* The name of the class ("TabbedPanels") used in this selector is not
* necessary to make the widget function. You can use any class name you
* want to style the TabbedPanels container.
.TabbedPanels {
    margin: 0px;
    padding: 0px;
    float: left;
    clear: none;
    width: 810px; /* IE Hack to force proper layout when preceded by a paragraph. (hasLayout Bug)*/
    position: absolute;
    left: auto;
    top: auto;
    color: #666;
/* This is the selector for the TabGroup. The TabGroup container houses
* all of the tab buttons for each tabbed panel in the widget. This container
* does not contribute anything visually to the look of the widget for our
* default style.
* The name of the class ("TabbedPanelsTabGroup") used in this selector is not
* necessary to make the widget function. You can use any class name you
* want to style the TabGroup container.
.TabbedPanelsTabGroup {
    margin: 0px;
    padding: 0px;
    width: 840px;
    color: #666;
/* This is the selector for the TabbedPanelsTab. This container houses
* the title for the panel. This is also the tab "button" that the user clicks
* on to activate the corresponding content panel so that it appears on top
* of the other tabbed panels contained in the widget.
* For our default style, each tab is positioned relatively 1 pixel down from
* where it wold normally render. This allows each tab to overlap the content
* panel that renders below it. Each tab is rendered with a 1 pixel bottom
* border that has a color that matches the top border of the current content
* panel. This gives the appearance that the tab is being drawn behind the
* content panel.
* The name of the class ("TabbedPanelsTab") used in this selector is not
* necessary to make the widget function. You can use any class name you want
* to style this tab container.
.TabbedPanelsTab {
    position: relative;
    top: 0px;
    float: left;
    padding: 0px;
    margin: 0px;
    list-style: none;
    -moz-user-select: none;
    -khtml-user-select: none;
    cursor: pointer;
    height: 41px;
    width: 158px;
    outline:none;
    text-align: center;
    font-family: Archer-Medium-Pro.otf;
    font-size: 1.4em;
    font-weight: normal;
    color: #666;
    font-style: normal;
    padding-top: 8px;
    -moz-border-top-right-radius: 8px;
    -moz-border-top-left-radius: 8px;/* for older versions of Firefox) */
    -webkit-border-top-right-radius: 8px;
    -webkit-border-top-left-radius: 8px;/* for older versions of Safari and Chrome */
    border-top-right-radius: 8px;
    border-top-left-radius: 8px;/* Newer browsers */
/* This selector is an example of how to change the appearnce of a tab button
* container as the mouse enters it. The class "TabbedPanelsTabHover" is
* programatically added and removed from the tab element as the mouse enters
* and exits the container.
.TabbedPanelsTabHover {
    background-color: #EEE;
    color: #FFF;
    width: 158px;
    outline:none;
/* This selector is an example of how to change the appearance of a tab button
* container after the user has clicked on it to activate a content panel.
* The class "TabbedPanelsTabSelected" is programatically added and removed
* from the tab element as the user clicks on the tab button containers in
* the widget.
* As mentioned above, for our default style, tab buttons are positioned
* 1 pixel down from where it would normally render. When the tab button is
* selected, we change its bottom border to match the background color of the
* content panel so that it looks like the tab is part of the content panel.
.TabbedPanelsTabSelected {
    height: 41px;
    width: 158px;
    background-color: #a7b9c3;
    font: Archer-Pro-Medium;
    color: #FFF;
    outline:none;
/* This selector is an example of how to make a link inside of a tab button
* look like normal text. Users may want to use links inside of a tab button
* so that when it gets focus, the text *inside* the tab button gets a focus
* ring around it, instead of the focus ring around the entire tab.
.TabbedPanelsTab a {
    color: #666;
    text-decoration: none;
    outline:none;
/* This is the selector for the ContentGroup. The ContentGroup container houses
* all of the content panels for each tabbed panel in the widget. For our
* default style, this container provides the background color and borders that
* surround the content.
* The name of the class ("TabbedPanelsContentGroup") used in this selector is
* not necessary to make the widget function. You can use any class name you
* want to style the ContentGroup container.
.TabbedPanelsContentGroup {
    clear: both;
    background-color: ;
    outline:none;
/* This is the selector for the Content panel. The Content panel holds the
* content for a single tabbed panel. For our default style, this container
* provides some padding, so that the content is not pushed up against the
* widget borders.
* The name of the class ("TabbedPanelsContent") used in this selector is
* not necessary to make the widget function. You can use any class name you
* want to style the Content container.
.TabbedPanelsContent {
    padding: 0px;
/* This selector is an example of how to change the appearnce of the currently
* active container panel. The class "TabbedPanelsContentVisible" is
* programatically added and removed from the content element as the panel
* is activated/deactivated.
.TabbedPanelsContentVisible {
/* Vertical Tabbed Panels
* The following rules override some of the default rules above so that the
* TabbedPanels widget renders with its tab buttons along the left side of
* the currently active content panel.
* With the rules defined below, the only change that will have to be made
* to switch a horizontal tabbed panels widget to a vertical tabbed panels
* widget, is to use the "VTabbedPanels" class on the top-level widget
* container element, instead of "TabbedPanels".
/* This selector floats the TabGroup so that the tab buttons it contains
* render to the left of the active content panel. A border is drawn around
* the group container to make it look like a list container.
.VTabbedPanels .TabbedPanelsTabGroup {
    float: left;
    width: 10em;
    height: 20em;
    background-color: #EEE;
    position: relative;
    border-top: solid 1px #999;
    border-right: solid 1px #999;
    border-left: solid 1px #CCC;
    border-bottom: solid 1px #CCC;
/* This selector disables the float property that is placed on each tab button
* by the default TabbedPanelsTab selector rule above. It also draws a bottom
* border for the tab. The tab button will get its left and right border from
* the TabGroup, and its top border from the TabGroup or tab button above it.
.VTabbedPanels .TabbedPanelsTab {
    float: none;
    margin: 0px;
    border-top: none;
    border-left: none;
    border-right: none;
/* This selector disables the float property that is placed on each tab button
* by the default TabbedPanelsTab selector rule above. It also draws a bottom
* border for the tab. The tab button will get its left and right border from
* the TabGroup, and its top border from the TabGroup or tab button above it.
.VTabbedPanels .TabbedPanelsTabSelected {
    background-color: #EEE;
/* This selector floats the content panels for the widget so that they
* render to the right of the tabbed buttons.
.VTabbedPanels .TabbedPanelsContentGroup {
    clear: none;
    float: left;
    padding: 0px;
    width: 30em;
    height: 20em;
Thank everyone again for all the help!

Is it possible to change the CS4 background color?

I am doing a job which requires lots of screengrabs of images and settings against the usual dark gray CS4 background. The problem is that the guidelines you adjust to form a rectangle round the image you're grabbing are dark grayish too and it's difficult to see it against the gray background. Is there any way to temporarily change the dark gray CS4 window background color? I'm running under Vista and changing the window and application background colors in Vista makes no difference to the background color in CS4 which sticks at dark gray.
Thanks.
David

Thanks.
Geoff - Changing the color in Full Screen with Menus has no effect. The dark gray is still there after a close CS4 and open.
Thanks for the alternative approach. The Faststone screengrab process is quicker. It's just a nuisance you can't change the color or thickness of the grabbing lines.
Rob - which background? When I right click on the CS4 background - the working area with nothing in it - I get no context menu. I get nothing in fact.
I am surprised that the Prefernces/Interface changes don't work but they don't seem to.
I have done abou 160 screen grabs and probably have another 3-400 to do.
David

Change the bar graph color

Hi
Is it possible to change the bar graph color? I want the first bar to be green, second to be red, thrird to be orange and fourth to be gray.
Is there anywhere to specify the color?
Thanks

Did you find the Fusion 11g Web Guide section 23.5.1 any help?:
http://download.oracle.com/docs/cd/E12839_01/web.1111/b31973/dv_graph.htm#sthref410
CM.

Is it possible to change the colors of the tabs in the pannelTabbed comp

Hi Experts,
Is it possible to change the colors of the tabs in the pannelTabbed component.
suppose for the selected tab we need white color and non selected we need brown color.
How can we achive this using ADF.
Regards
Gayaz

[url http://download.oracle.com/docs/cd/E14571_01/web.1111/b31973/af_skin.htm#BAJFEFCJ]skinning

Is it possible to change the settings in AR Properties Advanced tab with Adobe Acrobat XI?

I noticed when I went to print a PDF double sided, that despite the following the guidelines from Adobe on this process, it still printed single sided. I checked the properties of the PDF itself and on the Advanced tab, the DuplexMode was set to Simplex and was greyed out.
Is it possible to change the settings in that tab with Adobe Acrobat XI?
Regards
Sharon

Dear Sara
Thank you for your reply.
I have two printers, both support automatic duplexing. Any PDF we receive
or create we are unable to print double sided on our mac mini¹s. I didn¹t
make it clear in my question that we were fine on Windows XP, but, having
recently changed to Mac have encountered this frustrating problem.
I did a lot of research prior to recording the question and it appears I am
not the only one who has come across this problem, and I have followed the
guidelines that Adobe promote on their website to be able to print double
sided, which doesn¹t work on the mac mini Osx Mavericks.
Because the Properties, Advanced tab has ³Print Dialog Presets² that are set
to simplex and greyed out I took that to mean that no matter what printer
settings I make, and I think I¹ve gone through all that I can, the pdf will
not print double sided on Mac but will on XP.
Sorry this isn¹t the reply you must have been hoping for and look forward to
receiving further advice in regard to this matter.
Regards
Sharon

How is it possible to change the page of 1 tab to Page 2 then to page 3 etc using a boolen control?

Hi sir,
I created A tab control of 4 pages.How is it possible to change the page of 1 tab to Page 2 then to page 3 etc using a boolen control?
Please Mark the solution as accepted if your problem is solved and donate kudoes
Solved!
Go to Solution.

You have a couple of possiblities:
Keep the tab value in a shift register and use a value changed on the boolean to increment or decrement the tab. Write to a local variable of the tab as needed (I would recommend against value property nodes as in the above examples by others).
You could also hide the tabs and make the tab control an indicator. Now you can write directly to the terminal if the boolean changes and you don't even need a local variable.
Here is an example showing both (LabVIEW 8.2).
LabVIEW Champion . Do more with less code and in less time .
Attachments:
TabSwitcher.vi ‏18 KB

Is it possible to change the position of beining of text in a standard report

Hi,
I am wondering wether it is possible to change the position of the test (the starting point) in a standard report. I would like to print a label with different texts at different positions. If its not possible in a standard report is there any other way to do it.
Thank you,
Mudda.

Hi Mudda, I don't see any way myself to set any particular starting position for your text. It looks like the best way to emulate this behavior would be to add a new line with lots of tab characters or spaces to place your new text at a specific offset from the left. You can also use Append Table to Report and wire in a 2D string array with only a few positions filled in with your various text labels as shown below. This will space text labels pretty well across the page. Try it out and see if it works for you. You could be more clever and build the 2D array programmatically if you wanted more control over position.
Message Edited by Jarrod S. on 06-02-2006 05:37 PM
Jarrod S.
National Instruments
Attachments:
Set_Report_Position.JPG ‏69 KB

Is it possible to change the frame rate of a motion template?

Motion has some very useful templates, but the majority are only offered in NTSC, not PAL. (including all in 3D TEXT PROJECTS).
Is it possible to change the frame rate to 25fps before I start adding my own stuff, so that I can easily get the timing right for a PAL sequence in FCP.
If not in Motion, how else could this been changed?

Try dragging all the groups from one project into another instead - you'll need to open both project and rearrange the windows so you can see the layers tab for both of them.

Possible to change the xml output of the Inbound Interface?

Hi All,
I hav a scenarion where a third party system receives the XML from XI. the output of the xml from XI looks as follows:
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:Messages xmllns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1>
- <ns1:WMSItalyItemReplication xmlns:ns1="http://cpe.com/cpe_ftp_wms/ItemReplication">
- <item_dl dt_tm_created="2006-06-29 09:02:23">
- <item action="" owner_id="CIB" itm_num="3143832ZZ99">
<itm_desc>Ageflex ACM50 Test</itm_desc>
<unt_dol_val>1</unt_dol_val>
<lic_ctrl_flg>Y</lic_ctrl_flg>
<lot_ctrl_flg>Y</lot_ctrl_flg>
<shelf_life>999</shelf_life>
<product_life>999</product_life>
<incubate_prd>0</incubate_prd>
<hold_ord_flg>N</hold_ord_flg>
<kit_type>N</kit_type>
<prelabel_flg>N</prelabel_flg>
<rcv_only_flg>N</rcv_only_flg>
<convey_flg>N</convey_flg>
<front_flip_flg>N</front_flip_flg>
<pick_shp_bp>N</pick_shp_bp>
<side_flip_flg>N</side_flip_flg>
<rotate_flg>N</rotate_flg>
<itm_udef_a />
<itm_udef_b />
<itm_udef_c>Constant1</itm_udef_c>
<itm_udef_d />
<multi_conf_flg>N</multi_conf_flg>
</item>
</item_dl>
</ns1:WMSItalyItemReplication>
</ns0:Message1>
</ns0:Messages>
And the output that the third party expects is as follows:
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE item_dl SYSTEM "http://localhost/dtd/item_dl.dtd">
<item_dl><item><itm_desc>Ageflex ACM50 Test</itm_desc>
<unt_dol_val>1</unt_dol_val>
<lic_ctrl_flg>Y</lic_ctrl_flg>
<lot_ctrl_flg>Y</lot_ctrl_flg>
<shelf_life>999</shelf_life>
<product_life>999</product_life>
<incubate_prd>0</incubate_prd>
<hold_ord_flg>N</hold_ord_flg>
<kit_type>N</kit_type>
<prelabel_flg>N</prelabel_flg>
<rcv_only_flg>N</rcv_only_flg>
<convey_flg>N</convey_flg>
<front_flip_flg>N</front_flip_flg>
<pick_shp_bp>N</pick_shp_bp>
<side_flip_flg>N</side_flip_flg>
<rotate_flg>N</rotate_flg>
<itm_udef_a></itm_udef_a>
<itm_udef_b></itm_udef_b>
<itm_udef_c>Constant1</itm_udef_c>
<itm_udef_d></itm_udef_d>
<multi_conf_flg>N</multi_conf_flg>
</item>
</item_dl>
Observe the first two lines of the second output.
I tried to generate the second xml using a java mapping. and it is working fine when i test it in the Interface mapping's test tab. but it is not working when i test the scenario end to end. It is giving some runtime error.
is it possible to change the namespace, etc in the output of the XML coming out of XI? if v change those namespace stuff, does XI recongnise the message and send it to the appropriate reciever?
Please suggest me any solution.
any help wud b greatly appreciated.

The first XML is a Split msg XML..Where there are multiple messages within a single XML document..Thats why u have a <ns0:Messages xmllns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1>
Tags..
Recheck what ur target system needs are & change ur mapping in XI.

Related Topics: Is it possible to change the order of topics?

Hi,
Is it possible to change the order of Related Topics? I need
to change the order of topics (that is, I don't want the topics
alphabeticized.)
Thanks,
FMnRH

Hi FMnRH
Yes, you may change the order. If you have already inserted
the control, double-click it to edit it. Then click the Topics tab.
Click to select the topic you wish and below that, the area lists
the topic name. The field is labeled "Title". So you click in the
field and prefix the title with 1. or 2. to force the order you
want.
If you don't wish to prefix, you will have to manually edit
the HTML code. But it is possible.
Cheers... Rick

Is it possible to change the compiler that is built into Sun Creator?

Is it possible to change the compiler that is built into Sun Creator?
I would like to compile my project to run under the JNI. I have tried to use the command line to run the javah -jni filenames but I always get errors and my assumption is that I need to change or adapt the IDE WITHOUT violating any licensing agreements to get the JNI working in this IDE.
I would appreciate any help that I could get in regards to this issue whther someone from SUN wants to comment or if any developer's have had this issue and have solved it...

Okay, I just tried this. I changed the default location of J2SE JDK in the creator conf file. Saved the file.
For example:
#netbeans_jdkhome="C:\Program Files\Sun\Creator2_1\java"
netbeans_jdkhome="C:\Program Files\Java\JDK1.5.0_04"
On restarting the IDE the new path is taken. To see the change: go to main menu -> Help -> About Java Studio Creator . Go to Detail tab. You will see the values for Java and Java Home changed as per your change in the creator.conf file.
Hope this helps.

I wanna change the tab name in tcode ie02 :) i'll give u points !!!

Hi abapers,
In screen ie01 i want to change the tab name, like instead of general, i want to put some other.
If it is possible, do help me.
<b>I ensure u for giving ur share of point.</b>
Regards,
[email protected]

Hi Pradeep
I am giving here the names of the exits for this transaction ie01
You will have to customize one of the exits according to your req.
Exit Name           Description
IEQM0001            Add. checks for equip. installation at functional locations
IEQM0002            Additional checks for definition of equipment hierarchies
IEQM0003            Additional checks before equipment update
IEQM0004            Object is allowed for contract partner (Order->MaintCont.)
IEQM0005            Object allowed for SD contract (MaintContract->MaintCont.)
IEQM0006            Object allowed for SD contract (Maintain maintenance cont.)
IEQM0007            Check/change manufacturer field in equipment master
Thanks & regards
Ravish Garg
<b>REMEBER REWARD POINTS IS THE BEST WAY TO SAY THANK YOU</b>

Is it possible to change the tab index color?

Similar Messages

Maybe you are looking for