Is it possible to connect an older Power Mac (running OS 10.5.8) to an iMac running 10.9.5. I want to share the monitor, keyboard and mouse and switch between the two computers.

as far as I know then the target display mode is not an option with such an old mac

Similar Messages

How do you scroll up and down on the library and playlists? I can only see an up arrow at the top of the first column on the left and it only switches between the top 28 songs and the bottom 28.

How do I scroll up and down playlists and library on the new iTunes format.? When I ckick on the arrow in the box at the top of the far left column it only switches between the top and bottom 28 songs.

Hi
I looked at the specs for your laptop and there is no HDMI out port for this model but RGB & Headphones out jack should work. Here is the link for closeup views of the ports.
http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?modelFilter=L555D-S7005&rpn=PSL...
Click on product tour.
Qosmio X505-890=i7-740QM-6GB DDR3-64 GB SSD-500 GB SATA-
BR-Rom-DVD Burner-HD 18"Display-GTS360M-1GB-GDDR5
HP 17 Envy 3wks Returned
DIY Desktop Builds

PCUI - Pop-up "save changes" appears every time we switch between the list

Hi Experts,
maybe you can help me with the following issue:
We work with PCUI EP 7.0 and CRM 5.0 and if we start a pcui application (Salesorder for example) and open the
enhanced search, put some data in the search criterias and then press search - the system gives us the "save changes"
pop-up?!? The same behaviour occurs if we switch between the list and the detailed view - and we haven't done any changes
Do you know this problem and do you have a solution for this?
regards
marc

Hi,
This pop up is related to the WorkProtect mode,
It will be configured in the portal,
There will be 3 options available
if Workprotect mode is 0--- then navigate automatically
1-- pop up and then navigate
2- navigate with out saving.
i'm not sure about the values.
WorkProtect mode can be seen in the personalize link and this link is available if eu_role is assigned to the corresponding user.
Please contact portal admin team regarding this.
Anilkumar

I have an older Power Mac and it does not have the ability/hardware to connect to my wireless network.It is on 2nd floor which has no ethernet connections available. How can I get connected wirelessly?

I have an older Power Mac desktop computer. I do not believe it has the hardware to connect wirelessly to my wireless network. The computer is located on the 2nd floor of my house where there are no ethernet network connections so I would have to use wireless to connect to the internet. I have a wireless LinkSys router downstairs that I use to create my wireless network. I also have a Time Capsule upstairs but without the ability to plug an ethernet network cable into it, I cannot use it to get internet access t the computer.
What hardware can I add to give me the abiity to connect the Power Mac to my wireless network?
Is there a way perhaps to link routers? IE. Can I somehow have my existing wireless router downstairs connect wirelessly with the Time Capsule upstairs that i could then plug the Power Mac into for connectivity?
Not sure what version of OS this computer is currently using but do know it does not have the newer dual Intel processors. As such I am unable to update to newer OS versions.

While uselessSABOTAGE's advice is great, in case of future issues, it would helps us in the future if you would post accurate tech specs of your model iMac.
You info states you have an older IMac PowerMac, but is also says your OS X version is OS X 10.7.2.
This is not possible. OS X 10.7.2 Lion only runs on Intel CPU Macs.
Please, go up to the Apple symbol in the upper top left of OS X main menu bar. Click the symbol. Then click About this Mac. A popup window appears that gives some basic info. Then, click the More Info button and both post your iMacs complete specs by selecting/highlighting all of the info and copy paste this into a reply to this post, editing out your iMac's serial number. Then update the info you posted in your user profile with some of this new found data for future postings.

My assistant and I are using two Lightrooms (i.e. two serial numbers) and need to share between our two computers. I provide originals to her onto a flash drive. She tags them and returns them to me. I then copy the photos from her flash drive onto my com

My assistant and I are using two Lightrooms (i.e. two serial numbers) and need to share between our two computers. I provide originals to her onto a flash drive. She tags them and returns them to me. I then copy the photos from her flash drive onto my computer and load them in my LR. The photos appear but witthout any editing or tagging. We need to be able to have her working on the photos on her computer with her copy of LR and me on my computer with my version of LR being able to access what is already tagged and given back to me. This seems hard. We need advice on if it is at all possible to have two computers simultaneously working on LR . I bought her her own version because I was told at the time of purchasing that that was the only way to share. Please advise urgently! Thanks.

Sounds like your assistant isn't instructing Lightroom to write the tagging and editing to the files themselves, so wehn the files return to you, they don't have editing and tagging information. She need to select the photos in Lightroom and then Ctrl-S (Cmd-S on Mac). Or alternatively turn on the option to autmoatically write this information to the files.
If you are using RAW photos, then this information will be written to a sidecar XMP file, and your assistant must provide you with the sidecar file. If these photos are not RAW photos, then the information is written directly into the photo file itself.
Lightroom wasn't designed to be a multi-user program, and so it is truly not possible to have two people working on the same catalog at once. The way you are doing things, as modified above, is probably the way to go.
As an alternative, you can transfer (portions of) catalogs as well as photos back and forth and then all of these issues disappear, but a catalog might be rather large for a flash drive (or maybe not, it depends)

Switching between the firewire connection and USB 2.0 Connection

Is it possible to switch between the firewire connection and USB 2.0 Connection on a portable external hard drive? I've tried unsuccessfully to use the firewire connection on my external hard drive after using the 2.0 connection. No machine will read the drive if it is connected via the firewire port. Using USB 2.0 it works as intended.

Hello Grizzly Marmot,
Thank you for the feedback. So probably my old MAXTOR enclosure is playing me tricks ....
Last night the backup on my USB 2.0 was terribly slow ??? The incremental duplication of my hard drive (372.9 MB of data from 35GB of complete data) gave me these stats:
Copied : 6232 files, 372,9 Mo
Average : 8,8 Mo/minute (4,5 copying, 148,1 verifiying)
Just to analyse the drive it takes ±45 minutes ??? Also could the energy saving mode be a slow down factor (the suspension of the computer is NEVER) ???
I still wonder what speed I could experience for a wireless backup to a NAS drive ??
Thanks for helping.
Robert

If I have an airport extreme and a time capsule is it possible for seamless switching between the 2 when a signal is weak or drops Main reason is as I move from my first floor to my attic office and would like to place one (airport extreme)downstairs and

If I have an airport extreme and a time capsule is it possible for seamless switching between the 2 when a signal is weak or drops
Main reason is as I move from my first floor to my attic office and would like to place one (airport extreme)downstairs and time capsule upstairs to get complete coverage

In theory, yes. If you configure the two base station into either an extended or roaming network configuration, you should be able to walk a laptop between routers and the laptop should attempt to connect/reconnect to the base station providing the stronger signal ... but, in reality, this is not always 100% true.

Master is always switching between the same two members.

Hi all,
We have observed that our replicated environment, is always switching between the same two members even though there are other members with more cpu power.
As said on message {message:id=4169549}: "+In the event of a tie, an arbitrary, but predictable attribute is used to break the tie. In the current release, that tie breaker is an implementation artifact, and is not available through the public API.+"
I know the availability of "je.rep.node.priority" property but, is it possible to set a custom tie breaker or add some king of randomness to the default tie breaker?
BR,
/César.
Edited by: Cesar Alvarez on 04-jul-2011 18:05

Cesar,
No, currently there is no way for the application to influence the election, except through the use of je.rep.node.priority. However, is it possible to use node priority to achieve your goals? If use a positive priority value for all nodes (and avoid using zero), elections would make this choice:
- first consider nodes with most recent log files as master candidates
- node priority used as a tie for those most-recent nodes.
Since node priority is mutable, you could even change the node priority randomly on each node, which is rather awkward, but would work.
Out of curiosity, could you tell us your motivation for injecting some randomness into the master selection? We understand that some nodes have more resources and should be higher priority, but have not thought about why randomness would be useful.
Linda

Between any two computers, using hashCode() will get same digit?

between any two computers, using hashCode() will get same digit?

For the same object on the same machine running in the same JVM, hashcode is required to return the same integer primitive if the object is to be successfully manipulated in containers.
All other bets are off.
Dave.

I have an older Power Mac G5 Quad, and my video card just went out. I am trying to find a video card that will work for my Power Mac. I have duel screens but I can't seem to find the appropriate video card

I have an older Power Mac G5 Quad, and my video card just went out. I am trying to find a video card that will work for my Power Mac. I have duel screens but I can't seem to find the appropriate video card. The serial number on my computer is: RM620603R6W. Apple won't help me because the computer is older than suggested. Please give me the exact video card that will work best for my computer.

Hi Mike, make sure the card has Mac ROM, or is a PC card with Mac ROMs flashed to it...
G5 PCIe options are listed here:
http://www.jcsenterprises.com/Japamacs_Page/Blog/71BBF3EF-9713-4C53-8B80-26771F8 A4087.html

I need to connect a eMac - power mac 6,4 -PowerPC G4 (1.1) to the internet wirelessly running mac osx 10.4.11.

I need to connect a eMac - power mac 6,4 -PowerPC G4 (1.1) to the internet wirelessly running mac osx 10.4.11.
Can anyone advise me please. I have done some research and think a USB adapter is the best option as I doubt the eMac will be able to take a card but the software will have to be able to run on tiger.

Check this one out:
http://eshop.macsales.com/item/NewerTech/MXP3802NU2C/
Might be an idea to ask them for confirmaion that it will work with your Mac, but it should do!

HT1918 hi I'm travelling between two countries and i have a credit card and address in both, can i set up my itunes account to switch between the respectice i tunes stores

hi I'm travelling between two countries and i have a credit card and address in both, can i set up my itunes account to switch between the respectice i tunes stores

Not a single account, no, at least not easily. It would be better to set up individual iTunes Store accounts, one in each country. Your computer and devices can quite happily deal with two accounts, and then you can just log into the appropriate account when you're in the applicable country. You'll need a second email address to able to create a new Apple ID.
Regards.

Switching between the two GPU's

So does the computer switch automatically between integrated and discreate when it needs to or do you have to judge when you need more graphic processing power and manually switch it? Also, if you have to switch it yourself, is is complicated or do you just click a button somewhere?
Message was edited by: Soroshi
Message was edited by: Soroshi

The computer does not judge when to switch GPU's without you explicitly telling it to.
By default, the Macbooks are set for better battery performance and are set to use the integrated Nvidia 9400M.
To switch between cards, go to:
System Preferences > Energy Saver
The first option listed will be "Graphics" giving you the option of "Better battery life" or "Higher performance."
Toggle the "Higher performance" button and your mac will prompt you to log out. This process takes 5-7 seconds where the screen refreshes the desktop and switches to the 9600.

If i have my mac mini and my mac air connected to my thunderbolt display at the same time how do I switch between each of them without unplugging one of them?

If i have my mac mini and my mac air connected to my thunderbolt display at the same time how do I switch between each of them without unplugging one of them? (By the way im mirroring my macbook air to my thunderbolt display not dual screening it)

That's not what home sharing is for or how it works.
You want the remote app.

Disabling the integrated graphics card or updating any software they use that will aid the computer in switching between the two graphics chips.

So I couldn't activate Assassin's Creed 3 on bootcamp which I shuold have been able todo. I posted it on Ubistoft Support and This is what I got!
Hello ,
It looks like your DXDiag report is showing only an integrated graphics card. Being an Apple computer with an i7, it should have a dedicated video card as well. You may need to contact Apple support so they can help you either disable the integrated graphics card or update any software they use that will aid the computer in switching between the two graphics chips.
So I was wondering how I could disable the intergrated grahics card or update any software that will aid the ocmputer in switching between the two graphic chips.

The Early 2011 13-inch MacBook Pro has only got one graphic card, and this is the integrated card, Intel HD Graphics 3000.
Some games don't support this type of GPUs, and it looks like Assassin's Creed is one of them, so unfortunately, you can't run the game in this MacBook

Is it possible to connect an older Power Mac (running OS 10.5.8) to an iMac running 10.9.5. I want to share the monitor, keyboard and mouse and switch between the two computers.

Similar Messages

Maybe you are looking for