Is it possible to create a report combining data from 2 reports?

Post Author: swalker
CA Forum: General
We are upgrading the application, ServiceCenter.  We have reports that show our Response and Resolution Metrics.  I have 2 set of reports, one for the old version and one for the new version.  I need to combine the results of both reports into 1 and do calculations on the data from both.  Can this be done with 2 sub reports in the main report that does the calculations?  Can 1 report connect to 2 separate databases?  I am using Crystal Reports v8.5. Is there any documentation on this or sample reports?  Can any one please give me some guidance?  Thanks

Post Author: swalker
CA Forum: General
yangster thanks for the quick reply.  I am not really sure about combining reports, so I looked into what you said.  I tried to create a shared variable on the field that I need to share but that field is a running total and I get an error when I try to run the report "This field cannot be used becaus eit must be evaluated later."    So I am not sure what to do now.  Is there a work around for this?  Thanks for any help.

Similar Messages

  • Is it possible to create a dynamic dispatch VI from parent VI as a template

    Hi all,
    I'm new to LVOOP and wondering if it's possible to create a dynamic dispatch VI from the parent VI as a template.
    For example:
    I've got a Class-method in the parent class. All child-classes use this method except of one child, which needs a little tweak on this VI.
    So I need to overload the VI in the child class.
    When I choose "New -> New Dynamic Dispatch VI" I get an VI based on a template
    (As described by Darren Nattinger here: http://forums.ni.com/t5/LabVIEW/Darren-s-Weekly-Nugget-07-07-2010/m-p/1172483/highlight/true#M510414 )
    Is it possible to get a copy of the parent VI instead that I can tweak ?
    Thanks you in advance!
    Best regards,
    Balze

    An over-ride VI is not that special.
    The input and output classe must be "Dynamic".
    The icon connectors have to be the same.
    The Over-ride VI must have the same name as the parent and be a member of the child class.
    So Save-as add to project but not to class.
    Move to child class.
    Rename.
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • How to combine data from different input forms outside a nested iView

    Hi,
    i try to combine data from different input forms in a single one.
    Because of space reasons in Flex compiling i already use nested iViews. Within these nested iViews its possible to use the 'combine' function to do this.
    But in the main iView I cant compose these function with other elements. I need to do this because of using these model in Guided Procedures with output parameters. These parameters I only get with a 'endPoint'. Unfortunatly its not possible to combine data from different input forms into the 'endPoint'.
    Is there any solution?
    Thanx
    Mathias

    Hi Scott,
    i tried this already and i also tried to map all parameters in the endpoint by drawing lines from the other forms and assign the 'empty parameters' by a formula.
    And when i create a collable object in GP and assign the VC iView, only the parameters of the parent-form (the form who trigger the event) are shown as output-parameters.
    Maybe any other ideas? I cant believe that such a simple thing is not possible?!?!
    In my opinion, thats a bug, that I'am not able to use the combine-operator in the main VC-iView. Whats your mind?
    greets
    mathias

  • Combining data from different applications

    Dear all,
      I am using BPC 5.1
      I have a "Sales" application with dimensions "account", "entity", "time", "rptcurrency", "category", "product". And another "HR" application with the same dimensions as "Sales" except for "product".
      How do i create a report that combines data from both applications, assuming my dynamic template is opened with a current view of "Sales".
    Cheers

    Hi Lip,
    I just tried what you need and it worked fine.
    In your case, build a report say evdre, for HR application, and for the same sheet, change the current view to Sales and build one more evdre. You get a prompt saying one evdre may break while expanding other.Disable this prompt, belive me , it will work fine.
    The page key of HR application will have all dimensions refering to cvv of HR application, change it to refer to cvv of sales application( for only the dimensions both applications have in common).
    Now the report is dynamic with current view of Sales application.
    Hope this helps,
    Kranthi
    It took to long for me to reply:)
    Edited by: kranthi kumar on Sep 30, 2008 11:53 AM

  • OBIEE 11g - Combine data from two Oracle tables

    Good day!
    I tried to combine data from two Oracle tables as fact data, but it doesn't work.
    My steps: I created SCOTT.EMP2 table from SCOTT.EMP table, update EMPNO and ENAME values of EMP2 table to distinguish data of my tables. Then I imported physical tables DEPT, EMP and EMP2 to BIEE 11g, created joins DEPT-EMP and DEPT-EMP2 in physical diagram. Then I dragged DEPT and EMP tables to BMM, and EMP2 table to EMP as second LTS. In Content tab for EMP and EMP2 I checked "This source should be combined with other sources at this level" checkboxes. Then I renamed logical tables EMP and DEPT to Employees and Departments and dragged them to Presentation area. In Answers I created Analysis with columns DNAME and ENAME.
    The problem is that data on results tab is only from one physical table EMP or EMP2 (depending on the order of sources EMP and EMP2 of LT Employees) and not from both.
    Can anybody help? Am I missed something?
    Al.

    Hi Al,
    I think you have to define the content of the LTS.
    http://download.oracle.com/docs/cd/E12096_01/books/admintool/admintool_BusModSetup16.html
    You have to specify the content of the different fragments.
    http://download.oracle.com/docs/cd/E12096_01/books/admintool/admintool_SetUpAggNav3.html#wp1005333
    Maybe you have to add an additional column 'Source' ('EMP1', 'EMP2')
    Good Luck,
    Daan Bakboord
    http://obibb.wordpress.com

  • How to make smartform get data from report painter???

    hi all!
    please tell me how to get data from report painter?
    i has a report painter zabc ( create through t-code ke31).
    I want  get data from Zabc after run and show data by smartform.
    plz help me!
    thanks

    Hi ,
    Please check this link [SMARTFORM|http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVSCRSF/BCSRVSCRSF.pdf]
    Regards,
    Smart

  • Failed to read data from report file : Reason: Crystal Reports: Print Engin

    Hi,
    When we try to migrate the crystal reports from BO R2 to BO R3, some of the reports are faling with the error:
    Failed to create a new Report.Reason: Failed to read data from report file C:\DOCUME~1\xxxxx.rpt. Reason: Crystal Reports: Print Engine Error
    Would please someone help me in fixing the issue.
    Thanks and Regards,

    Few quick checks to identify the cause -
    1. Are you able to run report in your R2 system?
    2. In XI3.1, check SIA running on which account.
    3. Check the acount have sufficient rights on file system and registry.
    4. What's your web server?
    Give proper rights and import again. Hopefully it will resolve.
    Edited by: Das on Dec 6, 2010 9:47 PM

  • Failed to read data from report file Reason: The table could not be found.

    BO Enterprise XI R2, cannot publish crystal reports using the publishing wizard.
    Failed to read data from report file Reason: The table could not be found.
    Any ideas to get around this would really help out.
    Regards

    Connection used Views, ODBC System DSN is setup properly.
    Approach for import from business view manager and import wizard.  both methods failed to import the Business View and underlying reports.
    I figure I may have imported the Business View wrong? From Business View Manager I exported from my dev server then imported to prod server.
    Apparently I learned exporting my business view also includes the Data Connections that the Business Views are dependent upon.
    So which ever folder you specify it copies it there. Originally the all Data Connections Resides on the root folder. To return it to the original location. I deleted what I had exported. Exported this time to the root folder, then only deleted the business views, foundation, elements. Then exported again to the folder where I intended then only deleted the Data Connection.
    Makes any sense? So I then had to re point the business views and all the dependent objects to the data connection that resides in the root folder.
    I tested the connection, it works fine. I properly updated my crystal reports to the business view in production. Did a sample extract it works as expected.
    However when i try to publish, either from Crystal or Publish wizard i get the same error?
    As a work around i am thinking, after updating the business view in the crystal reports, shall i re map the fields?? or reexport the business views again?
    Any help will be surely appreciated.

  • Failed to read data from report file, failed to read parameter object

    Error message when doing a u201CSchedule List of Valuesu201D
    failed to read data from report file,
    c:\docume~1\user........
    failed to read parameter object
    Earlier in the day it worked just fine nothing had been changed.
    I have admin right on the windows server and in central management console
    Can someone please help with this issue.

    Hi Glenn
    Please let us know the following:
    1.What is the exact version of Crystal Reports Designer?
    2.What is the version of Business objects Enterprise installed on the machine?
    3.Are reports based on Business views,Deski,Webi?
    4.Are the reports migrated from older version of Crystal Reports to new Version?
    Thanks
    Shraddha

  • Failed to read data from report file

    Hello ,
    When iam trying to publish crystal report to Bo enterprise using Publish wizard, i get below error
    *"Failed to read data from report file C:\Users\prakash\Desktop\new_obj.rpt. Reason: File I/O error. File ~cidbc64f360135e0.rpt."*
    can you please help me in resolving it
    Regards,
    KumarTP

    Please post this to the [Business Objects Enterprise Administration|BI Platform; forum.
    - Ludek

  • How to export data from report to excel using report 10g

    Hi,
    usnig report 10g, can we export the data from report to excel.
    Regards
    Randhir

    Hi,
    have a look at metalink note 209770.1: Getting Reports Ouput to MS Excel - Techniques and References
    Regards
    Rainer

  • Error while loading Reported Financial Data from Data Stream

    Hi Guys,
    I'm facing the following error while loading Reported Financial Data from Data Stream:
    Message no. UCD1003: Item "Blank" is not defined in Cons Chart of Accts 01
    The message appears in Target Data.  Item is not filled in almost 50% of the target data records and the error message appears.
    Upon deeper analysis I found that Some Items are defined with Dr./Cr. sign of + and with no breakdown.  When these items appear as negative (Cr.) in the Source Data, they are not properly loaded to the target data.  Item is not filled up, hence causing the error.
    For Example: Item "114190 - Prepayments" is defined with + Debit/Credit Sign.  When it is posted as negative / Credit in the source data, it is not properly written to the target.
    Should I need to define any breakdown category for these items?  I think there's something wrong with the Item definitions OR I'm missing something....
    I would highly appreciate your quick assistance in this.
    Kind regards,
    Amir

    Found the answer with OSS Note: 642591..... 
    Thanks

  • Is it possible to create cube on t-code from R/3 ?

    Hi,
    there is one t-code in R/3 ZBDS.
    Is it possible to create one simple basic cube with all the fileds this t-code shows and to load data in BW ?
    Thanks,
    KS

    Hi Keral,
    BDS - Business Document Service . You can search for a document that has been stored using the Business Document Service (BDS).
    different tabs for Real estate objects, PM objects, Freight claims object etc. are different areas mainatined in the document finder  . Customization is done here :- In the IMG , choose SAP Web Application Server -> Basis Services -> SAP ArchiveLink -> Document Finder Customizing ->Register Document Areas and Create Aggregated Document Areas.
    Check this out fo rore information.
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/3e/8241421b35033be10000000a1550b0/frameset.htm
    You say "In t-code there are different tabs for Real estate objects, PM objects, Freight claims object etc.
    each tab has fields like business entity, object key, document type, created by, created on, changed by, change on etc. business want to create info cube on this fields.."
    Do you want create reports on document finder?
    Thanks

  • How create report with data from table and some columns results function ?

    Hi,
    How can i create on apex report region with some columns (of the report) as returned from a table and the other columns as results of plsql functions ?
    for example , I want to create a report like that:
    device last_date error_msg stop/start
    kodak1 06/04/08 null >>
    kodak2 08/03/08 good msg --^--
    kodak3 08/04/08 err msg >>
    3 rows returned
    where the 3 first columns are data returned from the table and the forth column is the result of plsql function (returned for example false) and on that i want to display a button of start ( >> in this example ) or stop ( --^-- in this example)

    Thomas,
    There is no problem here -- this is fully suported scenario.
    1. Bind Table dataSource to Customers node.
    2. Bind individual cell editors to any attribute of customer or any nested node like Address, say create column with InputField as editor, then for "value" property select Customer.Address.Street.
    Your nested nodes (like Address) must be non-singleton, set singleton=false on context designer tab.
    Valery Silaev
    EPAM Systems
    http://www.NetWeaverTeam.com

  • SSM calling Xcelsius and BO Reports combine datas and Universes into SSM

    I would like to connect within SAP SSM reports and Xcelsius passing parameters to dashaboards of Xcelsius (with BO universes or not) and merge information from PAS Cube and data from other universes BO.
    Could someone help me
    Best Regards
    Carlos Mardinotto

    Carlos,
    There are two different processes you use to get information into Xcelsius and into Universes. For Xcelsius you are using web services, since you are bringing in not only the data but the objective names, etc. to create the dashboards.
    For getting PAS data into Universes you create an ODBO connection to Voyager and from Voyager you create a Universe.
    In the Configuration Help guide for Strategy Management available from Service Marketplace (Installation & Upgrade Guides), Section 9.6 gives information on providing Strategy Management data for Xcelsius and Section 9.7 has instructions on providing Strategy Management Data for Voyager.
    Regards,
    Bob

Maybe you are looking for