Is it possible to create Indicater and control on same holizental slide?

Is there any possible to create Indicate values and change values on same Horizental slide. Because I am giving loop values to Horizental slide to indicate my values, after certain time if user wanted to move slide bar to another possition. it should move that perticular location then run loop from that value.
please send me the solution for my problem..
thank you..
Sashi

The loop counter is a built-in variable that you cannot control. It will always increase.
For your purpose, you must create a seperate variable that contains your index as you want to use it.
The attached VI shows a possible solution. Let me know if this makes sense to you.
LabVIEW Champion . Do more with less code and in less time .
Attachments:
horizental_slideNEW.vi ‏26 KB

Similar Messages

  • Possible to create detailed and Summary in same crystal report?

    Hello
    I have worked with cyrstal reports back in 2001. Now I am back to creation of reports. I vaguely remember I was able to create summary and detailed reports from one crystal report file. I don't remember if I was using two different stored procedures or not. Can anybody explain if it is possible to create summary and detailed reports from one crystal report file and with one stored procedure. I am guessing somehow I should be able to control behaviour of report - ie. say if user selects detailed report- report will show all records and if user selects summary view then report will show summarized view of same data.
    If its possible how do you do it? Can you explain.
    Thanks a lot.

    There are a couple of techniques with drilling and sub-reports, but what I do most frequently is create a Detail/Summary  parameter for the user to select, and then have a formula that references this parameter to either hide or display a Detail section of the report sepending on the option the user chooses.  My experience is that most users can relate to this approach better, where as driling and sub-reports can sometimes cause confusion for them.

  • How to create parameter and control file like filename + date

    Hello there
    I am trying to create parameter and control file with following command
    in SQLPLUS
    create pfile='/u03/oradata/WEBDB/backup/initWEBDB.ora' from spfile;
    In RMAN
    copy current controlfile to '/u03/oradata/WEBDB/backup/cf_longterm.cpy';
    how can I put date at the end of filename like
    initWEBDB8jan06.ora and cf_longterm8jan06.cpy
    Thanks in advance
    Lionel

    ASM is reliable but a smart DBA is very careful. If ASM is doing mirroring this is like RAID doing mirroring. What happens if you accidentally delete one copy ... the other one disappears instantly. Not a good idea.
    With respect to redo logs you need a minimum of three groups, two members, and one thread per instance. So a 2 node cluster should, at a minimum have 12 physical files.
    Not mirroring the redo logs, assuming multiple members, is not as critical.

  • Is it possible to create user defined control in labview

    in .net we can create user defined contol in which i can put more then one control and,, can use it as single control when needed,, but,, how this possible in labview,,
    actually in my program i have a tab control and,, in that tab control there are 8 pages,, now there are 5 different kind option selection for each page lets say "a" "b" "c" "d" "e",,,,,.,. so,, when i select "a" configuration for tabpage 1 should show.. "a"(control collection)  on tabpage1....and,, same should b possible for all 8 pages............................. this can possible if its possible to create user defined contorl in labview
    while in .net its very easy task i m confused here,..,.
    i put these controls in another 5 different  VI,,,, and tried to call in subpanel but,, i dont find the solution,,,
    Attachments:
    tabcontrol.vi ‏1 KB

    Hi,
    I've tried to open you attachment but LabVIEW tells me it's not a vi... could you check it and repost please ?
    I'm not really sure of what you need but you CAN customize you control in LabVIEW, it is not hard, you just have to know how it works
    Sometimes being good at another programation language confuse you more than it helps because you try to do as you are used to... the difficulty it to "translate" functions from a language to another.
    I do know how frustrating it can be when you think "Damned, it would take me only 5 minutes to do that with language a and after 10 hours with language b it is still not working "
    You have to get in LabVIEW way of thinking, I wish you good luck !
    A quick exemple... this might not do exactly what you need but it may help you anyway.
    When my feet touch the ground each morning the devil thinks "bloody hell... He's up again!"
    Attachments:
    exemple.vi ‏55 KB

  • Creating a test in PDF: Is it possible to create Right and Wrong answer fields in PDF?

    Very new to this.  I may be way off, but Im trying to create a test for some students to do in class.  Is it possible to create fields that turn green when right and red when wrong?  Also can you have a field that accumulates the right answers to give a score?

    Sure you can, with a bit of JavaScript. What sort of fields will you be using and what part of the field do you want to be green or red?

  • How to create redlog and control file at ASM in linux RAC

    Hi Experts,
    I will to maintance a oracle 10g database at ASM as RAC iin linux red hat.
    i am a new person with some question.
    nornally speaking, oracle recommadition for oracle 10g database as
    create 3 copy fills for control file
    create at least 2 redo log with mirror files in system.
    However, I checked find
    redlog file is at FRA place +FLSdisk1 and no mirror
    control file is at FRA place--+FLSDISK1/
    datebase file at ‘+DATA1/
    There are no mirror for relog.
    Go to EM, I also could not find place to enter file name.
    We use ASM to hold database to support RAC.
    Do i need to create redlog file as
    ALTER DATABASE ADD LOGFILE GROUP 1 ('+FLSdisk1/sale/onlinelog/REDO01.LOG','+FLSdisk1/sale/onlinelog/REDO01_mirror.LOG') SIZE 1000M reuse;
    my boss told me that ASM is reliable.
    Do you need to creat more directory to arrange redlog and control files in ASM for RAC system?
    FRA is a good place to store control file and redlog file ?
    Thanks
    JIM
    Edited by: user589812 on Jul 3, 2009 3:03 PM

    ASM is reliable but a smart DBA is very careful. If ASM is doing mirroring this is like RAID doing mirroring. What happens if you accidentally delete one copy ... the other one disappears instantly. Not a good idea.
    With respect to redo logs you need a minimum of three groups, two members, and one thread per instance. So a 2 node cluster should, at a minimum have 12 physical files.
    Not mirroring the redo logs, assuming multiple members, is not as critical.

  • Is it possible to create a remote controled VI that could be simultaneus pararell executed by several clients?

    Hi,
    first of all, excuse my low-level english.
    i have an aplication that consist in an waveforms analizer, with a main front panel and few sub panels, where data comes from *.tdms files in pc memory.
    I want to develope a remote monitored and controled project that could be used by few clients simultaneus, where they can load their own files in to the programm. It´s possible to run more than one instance of the VI at the same time.
    i´m checking the WEB UI Builder specifications, but i´m not sure if this is possible.
    thanks.

    Hi, Ángeniero,
    it is possible to control an application running on a server by several client computers simultaneously. There are two factors: licenses and reentrant execution. You can read it in the following document:
    http://digital.ni.com/public.nsf/allkb/2E814A22B7660EA786256BD500652F2C
    As regards reentrant execution, this functionality is added from LabVIEW 8.2 and higher, as you can see in this parragraph:
    "LabVIEW 8.20 introduced Reentrant Remote Front Panels which allow multiple users to simultaneously control a VI remotely. For more information on this reentrant functionality, see the Web Event in the related links section."
    All you have to do is marking your VIs as reentrant (File >> VI Properties >> Categoty: Execution). Every client computer will access to a different copy of the VI located on the server memory, so client computers can manage different data in spite of the fact that the server application is the same. You can watch this video for further information:
    http://zone.ni.com/wv/app/doc/p/id/wv-106/nextonly/y
    I hope this helps!
    Un saludo.
    Jesús.

  • Can i create processor and player in same programm

    hi,
    We are doing video conferencing.For this we have to capture video and save this video in a file but we are not able to display the captured video before save it into file.
    we are confused that weather we have to use createProcessor() or createRealizedProcessor()
    so please anyone can help us ,
    reply.

    If you have connected to the database with an account that has these privileges.
    Thus, for example, if your account has been granted the "DBA" role, then you can do so. Else, if your account has been granted the "CREATE TABLESPACE" and "CREATE USER", you can do so, even without the "DBA" role.
    Granting specific privileges to allow an account to execute specific functions is far more secure than granting the "DBA" role.
    Hemant K Chitale

  • Is it possible to create a custom control class and insert its instance in a form?

    I have several controls that will work togheter and in a similar way in several forms.
    For example, a GroupOption with two ButtonOptions. Clicking on one button option the frame willl  became higher and a TextBox will appear; clicking on the other the TextBox will disappear and the frame will shrink again.
    I need them in different size or few other propieties but the basic funcionality are the same.
    I was thinking to create a Class with all the built in Controls and the relevant methods and propieties to keep my code clearer, simpler and reusable.
    But I don't know if my idea viable.
    After creating a simpler version of the class; I was trying to put it at work in a test form but I could not find the way to insert it.
    I've only find a Application.CreateControl with a required parameter
    ControlType which ranges only over built in controls not custom one.
    I'm working in VBA with Access 2007 and later.
    Thanks for your advice.

    That is not really practical with Access. For example CreateControl does not work with compiled applications, which is how you should deploy them. Also the level of modularization you desire just is not available. Maybe a subform would come close to this,
    but I would HATE to work on one of your apps if you build each form with a collection of subforms.
    While you can and should re-use code using modules or class modules, not so much for UI elements. More advanced development environments like WPF can do this.
    -Tom. Microsoft Access MVP

  • Is it possible to create run and stop button on the control pannel instead fo using the ones on the tool bar?

    I have created a program which runs to all my specifications. The final thing I'd like to do is to be able to run it from the contrl panel.
    Can i create a run and stop button on the control panel or am i limited to using the little white arrow button on the toolbar?

    When you say Control Panel are you referring to the Front Panel of your VI?  If so then yes you can have the program start automatically upon being opened and close with a button push on the Front Panel.  Let me know if this is what you were looking for.
    CLA, CLED, CTD,CPI, LabVIEW Champion
    Platinum Alliance Partner
    Senior Engineer
    Using LV 2013, 2012
    Don't forget Kudos for Good Answers, and Mark a solution if your problem is solved.

  • Is it possible to create forms and workflow by Workbench and manage them by ContentSpace?

    Hi,
    In a previous issue, I have asked the interrelationship between Workspace and Contentspace. I learned a lot, and I'm very appreciate the kindly answer from Hodmi and Jasmin. And this time, I want to ask something about Workbench and Contentspace.
    As a part of presentation for a corporate client, I am trying to make a demonstration model. I 've created a PDF form and an Approval-and-Rejection workflow by Workbench. And I want to upload the form and the workflow to the Contentspace.
    In my imagination, I would make a button in the form, and then when I click the button, the form will be sent from the client side to the server side. As a result, it will appear on the space which I specified in Contentspace.
    About the workflow, I guess the Contentspace and Workbench may have some common place about Process Management and there is some transportation mechanism or something else between them. So by changing some configuration the workflow could be added into Contentspace.
    It is totally selfish imagination, but if it is possible, I think my corporate client will be more interesting about Adobe Livecycle.
    Beg your help.
    En Shoku

    Let's me just try to answer to question in several pieces.
    "And I want to upload the form and the workflow to the Contentspace."
    You can definitily save the form in content space. I'm not sure what you mean about the workflow.
    "In my imagination, I would make a button in the form, and then when I click the button, the form will be sent from the client side to the server side. As a result, it will appear on the space which I specified in Contentspace."
    This is also possible.
    "About the workflow, I guess the Contentspace and Workbench may have some common place about Process Management and there is some transportation mechanism or something else between them."
    You need to use the ContentSpace service. The Content Space service gives you a bunch operation like storeContent, retrieveContent, etc. You can use that service in Workbench, or call it directly using SOAP or REST.
    So to summarize, you can use the Content Space service to interact with content space to get and store your forms for you workflow.
    Jasmin

  • Is it possible to drag regions and control if AUTOMATION moves too?

    I know I can make Logic ALWAYS or NEVER move automation data with regions. My problem is that 50% of the time I move a region I want the automation data to move with it and 50% of the time I don't want the automation to move. Is there a key command or something I can press in either automation default mode that will override that default mode? Is there another solution?
    Thanks for any help!

    Eriksimon wrote:
    +Logic Pro>Preferences>Automation.+
    There are three modes, *Never, Always* or Ask. If you ask me I'ld answer that Ask is your answer.
    I was worried that was the case... I was hoping there was a key command that I could hold while dragging a region to control what happens to the automation.
    I usually use ASK but I find it frustrating to have the dialogue pop up every time I move a region. Grrrr! Is there no other alternative?
    Thanks for your help!

  • Is it possible to create a variable that tells you which slides the user has visited?

    Hi there.
    I'm working on a project where I want a slide to show a continue button and hide 2 textboxes, but ONLY when the user has already visited 2 other slides. I can only find variables that tell you the slide the user previously visited.
    Is it possible to set up a variable that does this?
    I want to create the following advanced action:
    If the user has visited slides 62 AND 87, show image_536 and hide text_caption_243 and text_caption_242
    I don't want the action to happen if only 1 of the 2 slides have been visited - it has to happen when both have been visited.
    Hope that makes sense.
    I'm using Captivate 7.
    Thanks.

    You will need two variables, it can be booleans. I'll label them v_one and v_two with a default value of 0
    Since I don't know how the slides are formatted, do you use a Next button or are all the slide frames visited? You'll need to have an event on those two slides to trigger an action:
    Assign v_one with 1     on slide 62
    And a similar action on the other slide to toggle v_two (do not use the toggle command, if the user visits a slide twice, it would be toggled back to 0).
    You didn't specify where those text containers have to be (please, label your objects and slides)? But you'll need conditional advanced action triggered by another event somewhere:
       IF v_one is equal to 1   AND
           v_two is equal to 1
      Show text1
      Show text2

  • Is it possible to run OEM12c and 11g in same box

    Hi,
    Currently we have 11g OEM in house and planning to test 12c OEM.
    My question is, can 11g and 12c OMS co-exist in same server?
    We are monitoring around 1000 targets in 11g OEM and could not loose them. Is it possible/safe to install 12c OEM in the same machine?
    Note: Hardware is not a bottelneck.
    Thanks and Regards,
    Midhun GT

    Humm, Got reply from a SR as below? Is that a false info ? Are we going to be in trouble ?
    + Yes, It is possible to have 11.1.0.1 and 12.1.0.1 OMS on same server.
    + To have both OMS running you should have different repository databases.
    + Ensure there are no port conflicts and try to provide different ports while installing 12.1.0.1
    + Ensure you have enough hardware resources on server to run both the OMS Applications and databases. You should meet hardware resources as in below documentation links :
    For 11.1.0.1 :
    http://docs.oracle.com/cd/E11857_01/install.111/e15838/appdx_hardware_reqs.htm#CACJBDGF
    For 12.1.0.1 :
    http://docs.oracle.com/html/E22624_12/preinstall_req_hw.htm#BACDDAACKindly Advise.
    Regards,
    Midhun GT

  • Possible to use Airport and Ethernet at same time?

    Short question: I want to use my wired Ethernet connection for my local area network to access my file servers and other computers on my network, and a wireless Airport connection for Internet usage.
    Is this possible? How?
    It seems that with both "on", I am connecting to both via Ethernet and it is forgoing the wireless network entirely even though it shows as connected to my wireless network.
    PowerMac G5 Dual 2.5GHz   Mac OS X (10.4.3)  

    This is normally done like this.
    Your Internet Service Provider furnishes you a Modem.
    You run an Ethernet cabale from your ISP's Modem to the Wan Port, or uplink port on your wireless Router, ( You will have to purchase the Wireless Router.
    Wireless Routers are available in 2 4 and 6 port varietys.
    Anything you plug into the ports as many computers as you have ports for hard wired connections. This will allow for wired and wireless connections to the Internet and all can be used simultaniouslly.
    Remember each machine you have connected will have to have the correct setting in the Network Preferences.
    This can also be done with a Switch or a Hub each varys a little bit on the confiquration.. If you need more information be specific on exactly what all you are trying to hook up and what ISP you have the Modem they furnish, the exact router you are using and the number of machines and how they are set in the Network setting on each,
    Normally any wireless router you purchase will give you a step by step on hoe to set it up, in the paper work that comes with them. Good Luck Don

Maybe you are looking for