** Is it possible to create new BPM instance for each record (Multiline)

Hi friends,
In my scenario, JDBC adapter (sender) polls the open purchase order items from the table at the specified interval and send to BPM. In BPM, we used transformation step to split the messages to process each PO . The scenario is working fine. The problem is assume that if we process 10 PO, the error is in 4th PO while process, the BPM will be stopped in 4th PO. Once we correct the error, we are able to restart.
In this case, we are not able to skip the 4th PO and process from 5th PO onwards. ie. the processing is sequential. Instead, we want to start new BPM instance for every PO. Advantage is that if 4th PO is error, only that BPM instance (work item) will be stopped. Remaining 9 POs will be completed.
So, how do we start new BPM instance for every PO ?
Kindly tell me, friends.
Thank you.
Kind Regards,
Jeg P.

Hi,
There are two ways to achieve this. In BPM and before BPM.
Before BPM:
Use 1 to unbounded mapping and 1 to unbounded interface mapping.
In your mapping, make sure you create a seperate message for each PO.
In BPM:
Create a multiline container with you POs using a 1 to n mapping.
Now add a ForEach block to loop through the multiline container and send each PO.
Important: Add an exception branch to catch any exception for each send so that the exception does not make the BPM fail.
Regards,
Yaghya

Similar Messages

Creating a dynamic page for each record.

So I understand how to grab a single row from a database for use on a dynamic page. Now creating 1,000 pages for each row would be rather tedious even with copy and paste. So can anyone provide me some information on how to do this without creating each page manually?

>See what im saying?
No.
>What you are suggesting wouldn't actually produce a page for that product which can be linked to from other areas of the site.
Yes it would. You create a link to a dynamic page and pass it the id of the item you want to display. So instead of using a link to a static page like this:
<a href="mywidget_01.html">My Widget 101</a>
You would link to a dynamic page like this:
<a href="widgets.php?id=101">My Widget 101</a>
The widgets.php would read the query string and pull the correct data for widget 101 from the database. You could even use url rewriting so the url of the dynamic page for widget 101 would be http://example.com/widget101
>What I need is an easier way to produce 40,000 static pages.
That's crazy. It defeats the whole purpose of dynamic sites. Before you start on this, make sure you fully understand your options.

Possible to create new ASM instance and "import" existing diskgroup?

This is my worst nightmare. Two days before a server was about to be shut down, it crashed on me, corrupting the filesystem where Oracle was installed. Setup was an HP-UX 11.11 server running Oracle 10g with ASM storage on a disk array. Both instances were in the filesystem that got corrupted, and amazingly, we don't have a backup, so I'm not able to restore the instance configs and restart the database. Presumably, my data is still sitting there on the disks that belong to the ASM diskgroup, but I don't know how to get at it. I started by creating a new ASM instance, but I can't figure out if there's a way to create a diskgroup out of those 16 disks without wiping out what's on them.
V$ASM_DISK shows all the disks as MEMBERs, with the CREATE_DATE that they were originally created, so I know at least the headers are intact. So is there any way I can manually recreate that diskgroup in my new instance so it will mount the disks and let me at the data?
I realize that not having backups is the height of stupidity, but that boat has sailed. My company also chose not to pay for Oracle Support this year, so I'm kind of on my own. If anybody can at least point me in the right direction or tell me that it's a lost cause, I'd appreciate it.

Well, a little progress. I was able to finally mount the disks in my new ASM instance, and using asmcmd, I can actually see my datafiles sitting there. So now I'm thinking I should try manually creating a new database instance pointing to the spfile that's in there and try starting that. I'm also going to try using RMAN and the XMLDB FTP trick to copy those datafiles somewhere else so I know I can play with them.

AME Bug: Creates new CFA file for each clip queued!

Here is my workflow: I have a 60 minute sequence of a dance performance of about 20 dances. I queued in AME 20 exports to H.264 files by moving the workspace to the segment I want to export, adding it to the queue with a file name, and repeating for the next section (dance).
For each queued export I make a copy so I have a low and high resolution export (40 in total). Finally, the last queued export is a MPEG DVD file for Encore.
The issue is that when I start the queue, the first thing AME does is conform the ENTIRE SEQUENCE'S AUDIO (not just the clip). Then it starts the export. On my computer (Core i7-2600, 24GB RAM), it takes over 15 minutes to conform a 60 minute sequence (the CFA ends being close to 2GB). While it's conforming the CPU load never goes above 10%. The export starts for the first clip and that takes less than 90 seconds with all 8 cores pegged at 100% and the GPU over 50%.
Then AME startes the conforming AGAIN FOR THE ENTIRE SEQUENCE instead of re-using the CFA file it just conformed!
Why doesn't it re-use the CFA file? Or, why does it conform the entire sequence if all I'm exporting is a portion?
And why isn't conforming a multi-threaded process?
At this rate, it will take all night and consume close to 50 GB of disk space in CFA files.
Here is what my queue looks like:

Actually, I think it's working as designed when it conforms upon export. See the online help HERE.
It says, in part:
Premiere Pro does conform audio in uncompressed clips when you use them in sequences with non-matching sample rates. However no conforming is done until you export the sequences or create audio preview files.
The audio in my Canon MXF file is uncompressed 16-bit Linear PCM, so when I bring in the MXF files all PPr does is create PEK files. This is really nice since I don't have to wait for conforming to begin editing. Creating PEK files is really fast compared to conforming. There is a caviat, though...
The max file size from my camera is about 2GB. Anything longer will span multiple files. If I copy the contents of the CF card from the camera to my computer, the browse to the files using PPr, it will find all the spanned clips and interpret them as one longer video file. Not problem, and that's how it's supposed to work. BUT, since PPr is treating all these spanned files as one longer video clip, it WILL conform the audio.
So to speed things up, I just bring in all the spanned files separately, then sort them and insert them into a sequence in order. It works fine, and no conforming.
My problem with AME is when it DOES finally conform, it's not re-using the CFA file. In my particular case, I'm taking one long sequence and exporting different portions of it as separate exports. I would think that AME would conform the whole sequence once, then re-use it. But no, it sees each as a separate export, so each export gets its own identical (but different named) CFA file.
So now my current workflow is:
Import in all the video as separate MXF files.
Import audio from digital recorder (house audio).
Mark the clapper sync points on the video and audio files.
Add video clips to a sequence in ascending order
Add to the sequence the audio track and align the sync markers
Balance the audio tracks with the mixer
Create a new sequence
Add to the new sequence the first sequence
Render and replace audio so I can get a waveform (it helps find edit points) and conformed audio
Add titles as needed
Edit the timeline, transitions, add Encore chapters, etc.
Export clips to AME queue
Save early and save often!

Is it possible to display the document link for each record in Report ?

Hi,
     Is it possible to display the document or Image link for each master record in the Report with the help of RSA1->Document->Master Data.
Usefull answers are really helpfull.
Advance Thanks for the userful answers.
Regards,
MRC.

Hi JAYASHREE PARASMAL ,
      Thanks for your valuable answers.
      Now i got the document in my Report,while executing the report through query designer as per your suggestion done on Setting Tab option.
      But i can't able to get the same thing,while i executing the Repory through WAD.
      What setting i need follow in the WAD for getting the same thing.
      Kindly give your suggestion to get the document in my Report,while i am executing through my WAD.
      Once again thanks for your helpful answer and awaiting for your suggestion.
Regards,
MRC.

Is it possible to run single workflow instance for multiple item changed or created?

I have created a SharePoint Designer 2010 approval workflow and I am starting this workflow on item created and modified . Now when I am adding and updating multiple items it is starting workflow for each item but I want to start only one workflow for all items.
I think it is possible in workflow 2013 but i want to use in
workflow 2010.
Is this possible? if yes then how?

Hi Resham,
From your description, my understanding is that you want to only start a workflow instance when multiple items are added or updated.
Per my knowledge, if we set workflow start on item created or modified, when we add or update multiple items, SharePoint will create a workflow instance for each item, it is unable to just create an instance for multiple items. It is same
between SharePoint 2010 workflow and SharePoint 2013 workflow.
You said it is possible in workflow 2013, do you have any references?
Thanks,
Wendy
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Creating new logical ports for WSDL with several port types not working

Hi all,
I am trying to integrate some BODS webservice into the BPM. I am using CE 7.2 Kernel Version: 7.20.3710. When I am trying to assign a provider system in the application configuration I get following error:
The provider system successfully found the needed service, but its wsdl is without webservice policy. Thus the generated client configuration might not work because of different configurations between service and client (most probable a difference in the security settings). Either assign a provider system with access to wsdl with policy or manually create the client configuration.
The regarding provider system is using a communication profil where the authentication method is set to "none". Normally this configuration should work, but it isn't.
So I started to create new logical ports for each port type. But then I get the error:
Port type name of loaded WSDL does not match the port type name of the Service Reference.
I checked already the port type names in the WSDL but they are 100% the same. What I found was that the configuration is always trying to use the first port type in the WSDL. So I am not able to configure the other port types in the service group.
I also tried to do the same thing using a WSDL with just one port type and surprise it is working...
I hope somebody can help me out
Thanks in advance
Andy

Hi Andy,
Please check this Link: https://cw.sdn.sap.com/cw/docs/DOC-45012
Regards,
Naresh B

OBPM Studio 10g R3: Create new process instance via PAPI

Hi folks,
I used JDeveloper to generate Java stubs off the PAPI WSDL. This works great and I'm able to list Processes similar to the bundled JAX-WS example just fine. Now I'd like to take it to the next level and create a process instance. I really appreciate your guidance on how to do that.
Currently my process has a Global Creation Activity (screenflow) and the BeginIn mapping goes to an Automatic Activity.
Questions:
1) Is it possible to create a process instance in my case given that I have a Global Creation Activity ? Or if not, what changes do I need to make?
2) Does anyone have any Java code examples for invoking the PAPI process instance creation code?
In my case, I found a method in the stub that accepts three parameters - the process Id (String), an "ArgumentSetBean name (String), and an ArgumentBean, but I'm not sure what to fill in. :-)
Thanks everyone!

Hi,
See if this helps -->
import fuego.papi.InstanceInfo;
import fuego.papi.ProcessServiceSession;
import fuego.papi.OperationException;
import fuego.papi.Arguments;
import fuego.papi.BatchOperationException;
public class PAPIExample {
     public PAPIExample() {}
     public static void main(String[] args) throws OperationException, BatchOperationException {
          FuegoService fuegoServ = new FuegoService();
          ProcessServiceSession fuegoSession = fuegoServ.createSessionWithUsernameAndPassword("papi", "password");
          String processName = "/TestPAPI";
          Arguments arguments = Arguments.create();
          arguments.putArgument("argName", "GuessWhoIsHere");
          // First Way
          fuegoSession.processCreateInstance(processName, "In", arguments);
          // Second Way
          String globalActivity = "GlobalCreation";
          InstanceInfo instInfo = fuegoSession.activityExecuteApplication(globalActivity, processName, arguments);
          instInfo = fuegoSession.instanceRefresh(instInfo);
          fuegoSession.close();
Edited by: Anup300684 on Jan 21, 2009 1:35 AM

Creating New Entity Instances within OPA

This is another one that I think I know the answer to, but I think it is best to confirm.
In prior versions, it was not possible to create entity instances within RuleBurst/Haley Office Rules. Is that still the case in OPA?
For example, my rules are determining the status of a case and the reason(s) why that status was determined. The case status may be Denied and the reasons may be "invalid customer Id", "expenses to income ratio too high", "primary customer not employed long enough", etc. I want to return all the reasons for the status. While the list of reasons is pre-determined, the ones that apply to a particular case are dynamic, as any, but not all can apply.
Given this situation using a database, I would create an instance of reason for each applicable one and link it to the case. In the past, with OPA's predecessor(s), it was not possible to create new instances from within. They either had to all be passed into the rulebase or a list of all allowable reasons attributes had to be created and then set to true for the ones that applied.
My preference is to create the instances inside OPA. Is that functionality provided in the current version?
Thanks,
Terry

Hi Terry,
Michael is correct that you can't write rules at design time which will dynamically create new entity instances at runtime. However, perhaps the new inferred relationships functionality in v10 could address what you're trying to do.
You can write rules which conclude membership of an inferred relationship. So you might always have, say, 10 instances of 'the reason' in every case, but as for which of those instances apply in any particular case, it depends on the details of the case. You could use an inferred relationship to collect up the entity instances which apply in the case.
First you'd need to set up a regular one-to-many relationship to instantiate the 10 instances at runtime - this would be done in the usual way. Then you'd also need to set up an inferred relationship and write rules to conclude the members of the inferred relationship. The instances which are members of the inferred relationship are then effectively the list of entity instances you wanted to create in your example above.
Have a look at this OPM Help article: http://www.oracle.com/technology/products/applications/policy-automation/help/opm10_1/Content/Rules%20using%20entity%20instances/Reason_about_relship_between_2_entities.htm
Cheers,
Jasmine

How to create new OC4J instance in AS 10.1.3 with BC4J- and ADF-Libraries

Hi
I have done all the steps mentioned in this thread:
How to create new OC4J instance in AS 10.1.3
However, the new created OC4J instance obviously misses some libraries. If I deploy my Application to this OC4J I get an internal error: Class not found: oracle.jbo.JboException.
The same Application runs well in the "home" Instance.
What is the trick, to create a new OC4J instance, which more or less behaves the same way as the "home" instances (and especially has all the same libraries)?
Thanks for your help
Frank Brandstetter

I encountered this last month. I definitely agree that it is a glaring omission to not have "Create Like" functionality when instantiating new containers. Here's my notes on the manual steps required after using createinstance to create the fresh container. Not too bad. I've been deploying ADF applications to the new container with no problems after this.
==============
The default (home) OC4J container is pre-configured for ADF 10.1.3 applications; however, when $ORACLE_HOME/bin/createinstance is used to create additional containers, these containers are not configured automatically to host ADF 10.1.3 applications.
I followed these manual steps:
1. $ORACLE_HOME/j2ee/home/config/server.xml defines three shared libraries that "install" the needed JARs for Oracle ADF applications in your application server instance (container). Note that "install" does not necessarily mean available to applications (see Step 2). Copy the three shared library element definitions to the <application-server> element of your new container (in server.xml).
<shared-library name="oracle.expression-evaluator" version="10.1.3" library-compatible="true">
     <code-source path="/usr2/oracle/as10130/jlib/commons-el.jar"/>
     <code-source path="/usr2/oracle/as10130/jlib/oracle-el.jar"/>
     <code-source path="/usr2/oracle/as10130/jlib/jsp-el-api.jar"/>
</shared-library>
<shared-library name="adf.oracle.domain" version="10.1.3" library-compatible="true">
     <code-source path="/usr2/oracle/as10130/BC4J/lib"/>
     <code-source path="/usr2/oracle/as10130/jlib/commons-cli-1.0.jar"/>
     <code-source path="/usr2/oracle/as10130/mds/lib/concurrent.jar"/>
     <code-source path="/usr2/oracle/as10130/mds/lib/mdsrt.jar"/>
     <code-source path="/usr2/oracle/as10130/jlib/share.jar"/>
     <code-source path="/usr2/oracle/as10130/jlib/regexp.jar"/>
     <code-source path="/usr2/oracle/as10130/jlib/xmlef.jar"/>
     <code-source path="/usr2/oracle/as10130/BC4J/jlib/adfmtl.jar"/>
     <code-source path="/usr2/oracle/as10130/BC4J/jlib/adfui.jar"/>
     <code-source path="/usr2/oracle/as10130/BC4J/jlib/adf-connections.jar"/>
     <code-source path="/usr2/oracle/as10130/BC4J/jlib/dc-adapters.jar"/>
     <code-source path="/usr2/oracle/as10130/ord/jlib/ordim.jar"/>
     <code-source path="/usr2/oracle/as10130/ord/jlib/ordhttp.jar"/>
     <code-source path="/usr2/oracle/as10130/jlib/ojmisc.jar"/>
     <code-source path="/usr2/oracle/as10130/jlib/jdev-cm.jar"/>
     <code-source path="/usr2/oracle/as10130/lib/xsqlserializers.jar"/>
     <import-shared-library name="oracle.xml"/>
     <import-shared-library name="oracle.jdbc"/>
     <import-shared-library name="oracle.cache"/>
     <import-shared-library name="oracle.dms"/>
     <import-shared-library name="oracle.sqlj"/>
     <import-shared-library name="oracle.toplink"/>
     <import-shared-library name="oracle.ws.core"/>
     <import-shared-library name="oracle.ws.client"/>
     <import-shared-library name="oracle.xml.security"/>
     <import-shared-library name="oracle.ws.security"/>
     <import-shared-library name="oracle.ws.reliability"/>
     <import-shared-library name="oracle.jwsdl"/>
     <import-shared-library name="oracle.http.client"/>
     <import-shared-library name="oracle.expression-evaluator"/>
</shared-library>
<shared-library name="adf.generic.domain" version="10.1.3" library-compatible="true">
     <code-source path="/usr2/oracle/as10130/BC4J/jlib/bc4jdomgnrc.jar"/>
     <code-source path="/usr2/oracle/as10130/BC4J/lib"/>
     <code-source path="/usr2/oracle/as10130/jlib/commons-cli-1.0.jar"/>
     <code-source path="/usr2/oracle/as10130/mds/lib/concurrent.jar"/>
     <code-source path="/usr2/oracle/as10130/mds/lib/mdsrt.jar"/>
     <code-source path="/usr2/oracle/as10130/jlib/share.jar"/>
     <code-source path="/usr2/oracle/as10130/jlib/regexp.jar"/>
     <code-source path="/usr2/oracle/as10130/jlib/xmlef.jar"/>
     <code-source path="/usr2/oracle/as10130/BC4J/jlib/adfmtl.jar"/>
     <code-source path="/usr2/oracle/as10130/BC4J/jlib/adfui.jar"/>
     <code-source path="/usr2/oracle/as10130/BC4J/jlib/adf-connections.jar"/>
     <code-source path="/usr2/oracle/as10130/BC4J/jlib/dc-adapters.jar"/>
     <code-source path="/usr2/oracle/as10130/ord/jlib/ordim.jar"/>
     <code-source path="/usr2/oracle/as10130/ord/jlib/ordhttp.jar"/>
     <code-source path="/usr2/oracle/as10130/jlib/ojmisc.jar"/>
     <code-source path="/usr2/oracle/as10130/jlib/jdev-cm.jar"/>
     <code-source path="/usr2/oracle/as10130/lib/xsqlserializers.jar"/>
     <import-shared-library name="oracle.xml"/>
     <import-shared-library name="oracle.jdbc"/>
     <import-shared-library name="oracle.cache"/>
     <import-shared-library name="oracle.dms"/>
     <import-shared-library name="oracle.sqlj"/>
     <import-shared-library name="oracle.toplink"/>
     <import-shared-library name="oracle.ws.core"/>
     <import-shared-library name="oracle.ws.client"/>
     <import-shared-library name="oracle.xml.security"/>
     <import-shared-library name="oracle.ws.security"/>
     <import-shared-library name="oracle.ws.reliability"/>
     <import-shared-library name="oracle.jwsdl"/>
     <import-shared-library name="oracle.http.client"/>
     <import-shared-library name="oracle.expression-evaluator"/>
</shared-library>
2. To make the necessary ADF and JSF support libraries available to your deployed ADF application, the default application (that your ADF application and the majority of applications should inherit from) should explicitly import the shared library in the <orion-application> element of $ORACLE_HOME/j2ee/<your container>/config/application.xml.
<imported-shared-libraries>
     <import-shared-library name="adf.oracle.domain"/>
</imported-shared-libraries>
Note: the adf.oracle.domain shared library imports several other shared libraries including oracle.expression-evaluator.

Is it possible to create many primary key for a table?

hello sir/mam.
i am selva, i am new to abap,
is it possible to create many primary key for a table?
please guide me.

Hi Selva,
Many Primary Keys = Composite Key.
i.e some set of columns will enable you to identify a unique row from a set of rows in the table.
This can be achieved by checking the primary key check box in se11.
Hope it helps.
Regards,
Maheswaran.B
Message was edited by: Maheswaran B

How to create new scale basis for shipment costs without modification?

Hi,
at the moment I am trying to create a new scale basis for shipment costs.
It is not a problem to create a new scale basis in table view V_TVFRFQ. The creation of an Append structure in the communication structure KOMK is easy, too.
The problem is the following:
When creating a scale for a scale basis with transaction VS01, the system picks some screens out of function group V57S. For my new scale basis there is of course no screen in this standard function group.
So my question:
How to create/generate a screen to create scales for my new scale basis without a modification of function group V57S?
To me it makes no sense that SAP offers a possibility to create customer owned scale bases but then gives the customer no possibility to create an input screen for that scale basis without modification. Therefore I think it should be possible to generate such a screen in some way.
If you have some idea, let me know.
Thanks!
Christian

Hi Christian,
We are currently facing exactly the same problem you described in your message in January 2009. I see that you have marked this as "answered", and was wondering if you would mind explaining how you overcame this issue?
Any assistance would be hugely appreciated.
Many thanks,
Kaushik

Unable to create new structure code for System Items flexfield

Hi
I installed the R12 with Vision. In the System Items flexfield, I find one structure code "SYSTEM_ITEMS". But I am not able to create new code as I am getting the error. "FRM-41051 - Cannot create new records here ". Also the New icon is disabled.
Is this how it is supposed to work? Cant we create new structure code for System Items flexfield in Vision Database? Please help me to resolve this.
Regards
Reem

Hi Everyone,
Lets address your exact problem ::
I installed the R12 with Vision. In the System Items flexfield, I find one structure code "SYSTEM_ITEMS". But I am not able to create new code as I am getting the error. "FRM-41051 - Cannot create new records here ". Also the New icon is disabled.
Is this how it is supposed to work? Cant we create new structure code for System Items flexfield in Vision Database? Please help me to resolve this.
Yes ! The answer is that this is exactly how it is supposed to work.
In Inventory :: [ System Items KFF ] is supposed to be single structure whereas Item-Categories has Multi-Structure option.
For every Single Instance :: It is like this only ~ as a standard functionality.
And this becomes very very challenging ( but a very fruitful & long lasting ) exercise.
Thrash it with the clients :: Why should you ever have 2-3 different Item codification schemas when its the same enterprise ?
They might respond with different intelligence incorporated in the Item Codes.
Most of the Intelligence can be shifted to the Item-Categories as they are not long lasting.
&&&& This means that either you can push for non-significant part numbering schema or the partial intelligence.
Keep it small & simple !!
Ajay Kuma, 510-456-5322

Is it possible to create a tool tip for an individual cell?

Hi,
Is it possible to create a tool tip for an individual cell?
Sun's JTable tutorial shows how to create a tooltip for an individual column:
TableColumnModel tcm = table.getColumnModel();
TableColumn tc = tcm.getColumn(0);
DefaultTableCellRenderer renderer = new DefaultTableCellRenderer();
renderer.setToolTipText("This is a tool tip text");
tc.setCellRenderer(renderer);
Thank you.

See reply #2 below:
http://forum.java.sun.com/thread.jsp?forum=57&thread=424429
;o)
V.V.

Want to create new protection group for 2 members which are already under another protection group.

Want to create new protection group for 2 members which are already under another protection group. I have 12 servers under xyz protection group, want to move 2 members server to new protection group. How it is possible without loosing current backups.

Hi,
It all depends if the data source was originally co-located on the same replica shared with other data sources. If not then DPM will simple re-use the same replica and pick up where it left off. If it was co-located, then the old replica and RP
volume is shared and the RP's will expire as new ones are made on the new replica and RP volume created when it's re-protected.
Moving Between Co-Located and Non-Co-Located Protection Groupshttp://technet.microsoft.com/en-us/library/ff399045.aspx
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

** Is it possible to create new BPM instance for each record (Multiline)

Similar Messages

Maybe you are looking for