Is it possible to develope an applicatio​n in Atmel AT91SAM926​3 using Labview
Hi friends,
I have exp in labview automation but totally new in Embedded applications . I have one Atmel AT91SAM9263 EK (including touch screen disply) borad with m. is it possible to develop applications using labview. for this purpose which module we required. From where i can start. please help me for that.
thanks,
niks
You have multiple options:
Since, it is supported by Keil (Atmel AT91SAM9263) you can follow the LabVIEW for ARM Microcontrollers porting guide (http://zone.ni.com/devzone/cda/tut/p/id/6994). You may be especially interested how Phytec board has been ported.
Also, if you want other RTOS, you can use Microprocessor SDK and read again about Phytec (http://digital.ni.com/manuals.nsf/websearch/AB597F3FD5D9011886257448005F4A0C).
Eiso-risky:
Even if you posted two times, I shouldn't click the button because this is a ARM926EJ-S and not Cortex-M3.
Would it were a Stellaris or SAM3U ..., but where is such a button?
Similar Messages
-
Hello,
I'm doing project which requires pneumatic actuator. Available actuator in our college is REXROTH BOSCH pnuematic actuator. which requires 24V and 500mA drive. Also it has to be timing controlled (I mean it should be ON & OFF, software controlled)
I have attached snap of my LabVIEW block diagram. Here, comparator output has to drive Pneumatic actuator. Also we have NI 9485, 8 channel Solid State Relay (SSR), is it possible to use it in my project?
Thank you, your help is much appreciated...
Attachments:
ni help.jpg 35 KBI apologize for my mistake,
I'm new to this community...
Image which I've tagged , contains 2 O/Ps from comparator.. I need to drive actuator from those O/Ps...
After processing Image & calculating number of particles, depending upon those numbers, i want to drive Actuator which i've specified earlier...
thank you for your time... help appreciated... -
I m having a mentor graphics drawing file having drawn with the components like resistor,capacitors etc..I need to develop an application to interface to the file using labview or adding a toolkit to labview to access the components like resistors etc .Can any body help me about this....?
Thanks in advance...!
Certified Labview Associate Developer(CLAD)
Don't Forget to Rate the answers.!!! You can do it in few secondsHi Lynn ,
Basically i want to read the mentor graphics drawing file data in a labview front panel, so that i can display the components as we see in the mentor graphics development enviornement and should be able to click on the components to perform the tests associated with the same.For this,i think i need to have the BOM kind of data only as i need the components data associated with the drawing file,after this i would create a custom control for each and every component and then call the tests associated with it as soon as the user clicks on the same.I hope you understand my requirements.
Thanks & regards,
Dinesh Kumar
Certified Labview Associate Developer(CLAD)
Don't Forget to Rate the answers.!!! You can do it in few seconds -
Is it possible to develop the control charts in WAD.
Hi Gurus and Experts
We need your suggestions to go futhure with our requirement.
Right now KPI's are currently displayed in graphical form with the
ability to drill down into WO's( Work orders) from the graph page. our
new requirement is to get exactly the same set of information captured
and presented in control chart form. This is to be an adjunct. to, not
replace, the existing graphical set of data. Upper and lower control
limits will be set initially by the business, and the same drill down
functionality should be available from the control chart. The charts
can be displayed seperately from the exisiting set of charts if this
makes it easier.
Can you please suggest us whether is it possible to develop the control
charts and also have the functoinalities of the existing dashboards
(example drill down of WO's using the control charts) in WAD or through
viusal composer
Waiting for your responses..
Thanks
Ravi...Hello dj_page!
Thanks for the answer, but I know this already.
My problem is, that the small picture in the side panel and the histogram in LR5 are bigger than in LR4.
The two pictures are showing the difference between the versions.
On the left hand (LR4) you can see a smaller preview and histogram than on the right hand (LR5).
In each version you can change the size of the side panel only as small as the preview-window is.
The pictures are also showing the smallest size of the side panel in each version. -
Even if we have bought the advance version of Adobe FormsCentral, is it possible to receive via e-mail the completed form in .pdf? If not, is it possible to develop this option? How much would it cost?
I know of no way to do this with Reader or XML.
-
Is it possible to develop struts application without using JPF in workshop 8.1?
Hi,
Is it possible to develop application based on struts framework without using
Java Page Flow in workshop 8.1?
I developed one application without using JPF , but it is showing some Deployment
errors.
rgds,
girishGirish--
Sure, though, I'd still encourage you to take a look at JPF. :)
If you remove the JPF runtime files from WEB-INF/, WEB-INF/lib, and JPF specific entries in
web.xml, you can start defining a struts-config.xml file against the Struts 1.1 runtime in the
webapp, or you can replace that with a different version as you need. You'll also need to define
the Struts runtime in web.xml including the servlet, taglibraries, etc.
One note, the JPF flow view and other JPF specific editors don't work over a normal
struts-config.xml file.
Hope that helps...
Eddie
Girish wrote:
Hi,
Is it possible to develop application based on struts framework without using
Java Page Flow in workshop 8.1?
I developed one application without using JPF , but it is showing some Deployment
errors.
rgds,
girish -
Is there any possibility to develope java application for IPhones
Is there any possibility to develope java application for IPhones
921326 wrote:
Just look to the next thread!I did that after I replied to the last person to ask this question. I spotted this thread:
Developing iPhone apps with JavaFX 2 (Demo)
Not much there, but apparently people are trying to hack it together using JavaFX 2 already. I believe I read an article where Oracle itself had given a presentation about a JavaFX2 app on an iPhone; I believe the gist of it is that they want to make it so you can bundle the Java runtime with your application, which makes it legal to sell a Java application through the appstore. -
Is it possible to develop CS6 plugins with XCode 6 on Yosemite?
Is it possible to develop CS6 plugins with XCode 6 on Yosemite?
I have the CS6 SDK and sample code but nothing will build.
My system is:
OS X 10.10
Model Name: Mac Pro
Model Identifier: MacPro6,1
Processor Name: 6-Core Intel Xeon E5
Processor Speed: 3.5 GHz
AMD FirePro D500
-AllanDid you have any luck with that?
-
Is it possible to develop tookit that provides features missing in profilel
Hi,
Is it possible to develop a toolkit that makes features missing in MIDP available to application developers? For eg, I want to develop a tookit targetted at the game developers.. how can i do this? any clues?
Thanx
RuchikaThanx for the help.
I undertsand that it is possible to write a toolkit on top of a profile, but is it possible to write a toolkit that sits at the same level as the profile... (for eg: some additional features) and allow the application to use features from both the profile and the custom toolkit?
My best guess on this is that only the device manufacturers can do such a thing but i am not sure about this. Any clues?
Thanx -
Is it possible to develop Flexsible reports in apex as Hyperion pivot?
dear friends
Is it possible to develop Flexsible reports in apex as Hyperion pivot, Tree
extendable, drog & drop report as in Hyperion interactive reports?
regrards?Is it possible to create these reports with Business Publisher?
regards -
Is it possible to develop illustartorCS4 plugin in MAC?
hi ,
Is it possible to develop illustartorCS4 plugin in MAC?. If so, what are the software to be needed to devlop in MAC machine.Just the SDK and Xcode. And a copy of Illustrator CS4.
-
Would it be possible to develop an update so my desktop looks more like my old iMac instead of like an iPod?
MMP318 wrote:
Would it be possible to develop an update so my desktop looks more like my old iMac instead of like an iPod?
There is one, it's called "System Preferences". And for items like the "Dock", you can use google to find the defaults code (i.e. 2D flat Dock for Mac OS X)
Most (not all) appearance issues can be adjusted to your liking.
With a little work, you'll have your iMac looking like 2005 in no time! -
Is it possible to built an applicatio​n, having some project conflicts
I use LabVIEW 8.6 and have some subversions of my projects on the development PC. Opening the subversions I get sometimes projectconflicts. Is it possible to built an application without solving the project conflicts? --> like LabVIEW7 which use the current VIs in memory to built application.
I know this isn't actually an answer to your question, but have you looked into using the conditional disable diagram structures? That might be a good way for you to maintain multiple versions without generating conflicts. From personal experience, I can also tell you that plug-in architectures based around VI server are another approach that works pretty well.
Jason -
I have developed one application software using Labview 8.5 in which i am collecting data from 5 temprature controllers on serial line.
This software is done and successfully installed on customer side.
Now the customer want this software to be run on server and some fixed number of clients should access this with some login security.
Is this fascility available with National Instruments in which i can installed this standalone application in server and allow some clients to access this with
proper login?
Regards,
VaibhavYes, that is possible. Multiple clients can access the VI using Web Publishing tool and control the VI operation. However, only one client has the control of the VI at one instance. The client needs to right click on the web page displaying the front panel of the running VI and ask for control and then release control after the execution to let other clients to ask for the control subsequently. The LabVIEW VI needs to be running upon the server computer since closing LabVIEW also closes the Web Publishing server and disconnects the currently connected clients.
Please check this link http://zone.ni.com/devzone/cda/epd/p/id/3797
You might want to create a stand alone executable for the same and then publish it over the internet for access by your desired clients. In that case, check this link http://digital.ni.com/public.nsf/allkb/3A0087DBE9D31F9286256B19000A2DAE?OpenDocument -
I have 8.2 Full Development System (2 copies as there are two of us who write code).
I develop testing systems, each on an individual computer, each customized with a custom built (by me) interface to test and measure perfomance of motors produced on the production line.
In order to modify the program and test it, I have to replace the production set-up computer with my developmental computer, make the changes (and check that they work) and then make the run-time version for the production computer. THEN switch computers. Since I have nearly a dozen different setups, I cannot just make two production test sets of each (one for development and one for production).
Is there an easier way?
Perhaps with HDD in a drawer? But then I'd have driver and version issues.
Is it possible to run the full development system remotely (from the production setup)?
What about a site-license?
Thanks,
Tim KFrom the 8.2 Release Notes:
Single-Seat and Multi-Seat Licensing
LabVIEW supports both single-seat and multi-seat licenses. Single-seat
licensing is the use of LabVIEW on up to three computers but by only one
user. Multi-seat, or volume, licensing is the use of LabVIEW on several
computers or by several users. Each seat using LabVIEW must have a valid
license from a license server. Refer to the National Instruments Web site at
ni.com/license for more information.
You are permitted to install LabVIEW on the the pc with the hardware, do the changes and debug, and re-build the app for production.
Maybe you are looking for
-
Photo Stream Upload - Bypass iPhoto & Aperture
It's easy to get photos from a device to the computer, Photo Stream handles that automatically, but... Long story short, I just want to be able to drop any image from my computer to my Photo Stream via a sync folder. Simple no? I can use Aperture or
-
I have received 3 friend requests via email but I cannot accept them. When I select view request, it just gives me directions on downloading the app and there are no requests in my app. How do I accept the request?
-
Core Services and Boot X "duplicates" -- can't trash
I am cleaning up various files and hard drives on my G4 tower. I'm running OS 10.4.11. I had a complete duplicate of the Applications folder on a 2nd Hard Drive. I put it into Trash and selected Secure Empty Trash. Most of the items in the folder wer
-
3.0 EA1 - DB Connection in Stored Procedure Windows
I don't know if anybody else has encountered this, or if it was fixed in EA2 (been way too busy to check it out). When I click on a stored procedure in the tree, it doesn't always open for the database connection that I'm selecting it from. Rather, i
-
Change of businnes partner number in middleware
Hi, we already have an exchange of R/3 customers with CRM business partners, but only for selected account groups. The internal number range of R/3 is mapped to a corresponding external number range in CRM. So far so good. Now we decided to distribut