Is it possible to develop Flexsible reports in apex as Hyperion pivot?
dear friends
Is it possible to develop Flexsible reports in apex as Hyperion pivot, Tree
extendable, drog & drop report as in Hyperion interactive reports?
regrards?
Is it possible to create these reports with Business Publisher?
regards
Similar Messages
-
Dear all,
I have existing jsp report that was developed with Oracle Report. Is it possible to reuse the report in Apex?. If so how? Thanks.
Regards,
Kueh.Hello,
You could call the url to the report from within an iframe? http://en.wikipedia.org/wiki/IFrame
You create an HTML region and in that region you put the code for the iframe with the url to your jsp report.
Regards,
Dimitri
http://dgielis.blogspot.com/
http://www.apex-evangelists.com/
http://www.apexblogs.info/
REWARDS: Please remember to mark helpful or correct posts on the forum, not just for my answers but for everyone -
Need to develop this report plezzzz help
the requirement says
When a user submits an ID they have to choose who sold the product from the sold by field.This has to be chosen correctly otherwise there will be issues in sales and commission process.I need to develop a report to detect immediately when an Id is created which seems to be suspect.A suspect ID is one in which a salesperson was chosen on a customer who is not assigned to that sales person territory
for example: if danny is in Kathy territory is assigned to a customer in Texas which is Larry territory.
any suggestions will be helpful for me...
Edited by: user13001889 on Jun 6, 2011 4:43 PM
Edited by: user13001889 on Jun 6, 2011 4:44 PMYou ask for help, yet all you give is conceptual data. How do you expect help on writing the report?
Q) What defines "territory"? Is it a flag? Zip code? City?
Here is an answer based on a lot of assumptions:
I would have to assume that territory is defined by something like city, state, or zip code. If so, you could start with this:
When a customer submits an ID, along with who he/she selects as a salesperson -- I assume this is a drop down box to eliminate multiple entries of the same person due to variations in spelling -- thep person's address, city, state and zip are included as well. Let's assume that territory is defined by zip code. With the salesperson's name and the zip of the customer captured, you have the basis for comparison.
Based on the table of all your salespeople and their territory (zip code in my assumption), you can create a report that contains a concatenated field of salesperson||zip code. This will produce a report with all possible combinations of salesperson and territory. This report will be your sub-query.
Now you have your main query based on the customer activity table and you create a concatenated field of salesperson (chosen-by-customer)||zip code (of the customer). You will put a filter on this concatenated column and have it based on the results of another request (your sub-query) with the operand "not equal to/not in."
If any record in the main query does not match an entry from the sub-query, that record will display. It will be a report that contains customers who chose a sales person who doesn't have that territory.
That's how you build your report. -
Can we develop CRM report by using Crystal report?
Dear all expert,
There is a report in CRM PRD which our ABAP programmer had did one which is complicated and invovlving FM and method. but since we had purchase BOBJ, we would like to develop this report by using crystal report. Is it possible?
Thank You.hi Stratos and Ido.
Stratos, i had try to develop 2 report and had figure out on how to do it soon. but now i have another CRM report that need to be done first for the use of marketing meeting next week. The report is 90% done where there is one field which make my report cant be finish. once i put that field into the report, it return me all the values contain in it. This causing other field follow to duplicate as well. The situation is as below:
without that field, my report goes(A B C D is the field header):
A B C D
1 II $ +
2 I % -
The field from table TJ30T(E is the field header):
E
a
b
c
When i try to put the E field into my report:
A B C D E
1 II $ + a
1 II $ + b
1 II $ + c
2 i % - a
2 i % - b
2 i % - c
I had check the linkages, there is only one key linking which is CRM_JEST.ESTAT - > TJ30T.STAT. How to overcome the situation as i mention above?
Thank You. -
Is it possible to run a report from another machine?
Lets say you design a report on machine A that contains the CR Developer Software Package.
Is it possible to execute the report from machine B that does not contain CR Developer Package?
Is there tool or a command that you can run that will execute the report created in machine A?
Thanks in advance,
Zack H.Crystal Enterprise (or BOE) will run a report developed on machine A and imported to a repository on the CE/BOE machine. Is that what you mean? Or, I suppose anything that can run a Crystal Report given the file name could run it if the UNC path is given for the file name (assuming database connections are set up on the running machine)...
HTH,
Carl -
Is it possible to add sub-reports at runtime?
Post Author: saibot83
CA Forum: General
Hello,I have a vast amount of reports. The user can select a list of reports and group them. I want the user to be ableto treat the report group as a single report (I.e. export to a single pdf file instead of 10 etc.) Is is possible to create an empty report that I can use to group all the reports that the user has selected into one?or Is it possible to design a report at runtime? I am using CR with VS .NET 2005. And have not found a way. Does the Developer version of CR allow me to do this? Any help will be greatly appreciated. Best Regards,Tobias Any help will be appreciated.Post Author: [email protected]
CA Forum: General
At first thought, if each subreport is a parameter, you can put a subreport in each section and conditionally suppress the section when
isnull(?Parameter) -
Regarding *.Prt Files For Development of Reports
Hi,
Can i create *.Prt Files in Oracle 9i Reports Developer ????
Please also mail in DETAIL while developing Reports where i have to specify *.Prt (Say Wide.Prt) Files ??
If development of *.Prt is not possible in Oracle 9i Reports Developer then from where we can create or get the
same ????
How the Coupling between *.Prt File and Oracle Report is done ????
Please mail me at [email protected]
Thanks in Advance !!!
With Regards,
Atul GuptaCan i create *.Prt Files in Oracle 9i Reports Developer ???? *.prt files behave the same in Reports 9i as they do in all previous versions of Reports.
Please also mail in DETAIL while developing Reports
where i have to specify *.Prt (Say Wide.Prt) Files ?? Typically you place the .prt files in %RW%\printers directory (or %RW60%\printers for 6i Reports). Check your registry entries but %RW% is usually defined as %ORACLE_HOME%\reports
If development of *.Prt is not possible in
Oracle 9i Reports Developer then from where
we can create or get the same ???? Not applicable since they're supported in 9i
How the Coupling between *.Prt File and Oracle Report is done ???? *.prt files are used during Reports character mode output so only work when the mode=character command line parameter is set. They defined the physical page size supported by a specific character mode printer as well as printer escapes that can be used to support any escapes that the character mode printer may support. If you are printing to file, then the desformat command line parameter will contain the *.prt file that Reports should use.
For further information, check out "Printer definition file syntax" in the on-line help. -
Inhouse developed/customized report
HI!
In my company, our ABAP team has developed some reports.
In version 4.5,
: these customised reports are put in the "Report Tree" (via transaction code SERP) by Functional Team. Functional Team organized the report structure.
: Security Team simply grant access - only Roles with access to the Report Program can execute the reports.
: Everybody call the same transaction to bring up the "Report Tree", having the same(one and only one view) of the "Report Tree"
In version 4.7, SAP no longer support the "Report Tree", we are advised to replace the "Report Tree" by "Area Menu".
When there is a new report,
: Functional Team will add the report to the required node in the "Area Menu" (via transaction code SE43N).
: Security Team has to look up which Roles got impacted, modify the "User Menu" of each impacted Role(via transaction code PFCG).
: Security Team has to make sure the new report is added to the required node in the Area Menu.
: As the result, there are a lot of inconsistency between the look and feel of Structure of the Report if Security Team forgot to add the report to one Role, if Security Team add the new report to node A in the User Menu for Role A but add it to Node B for Role B...
Would you mind share how you organize the in-house developed reports? Are you using "Area Menu" ? Do you have the same issues I have ? Any method to streamline and improve the consistency of the User Menu are welcomed .
Thanks in advance for the help.Hi,
Please find the logic below & try it at your system-
Here cost center group is not possible (also i not checked it so do it on your own simultaneously i am trying the same).
Use Table BSEG-> in bseg give the cost center-> with the help of cost center find the account number (field HKONT)-> take this GL account number & got to table COEP-> in this give the GL account number at field 'offsetting account' (field GKONT) & you will get the line item.
Try it & let me know if you have any question.
Thanks -
Develop a report to track discount for various product
hi
i need to develop a report to track discount for various product depending upon the clientHello Noor,
I'm not sure but if you are talking about the marketing attributes, you can definitely use FM - CRM_MKTBP_ASSIGN_ATTRIBUT_TAB
You need to pass the profile id, partner id and marketing attributes data. Thats it.
I think the FM you ar eusing for terrritory is fine. It should work.
I hope this helps.
Thanks
Vishal -
Developed a report which gives PO(Purchase Order) Pricing details.
hi experts,
please give me tables and fields for following report, and also exlain me briefly,
Developed a report which gives PO(Purchase Order) Pricing details.
thanks in advance,
radhakrishnaHello Radhakrishna,
you can use the function module
CALL FUNCTION 'RV_PRICE_PRINT_HEAD'
EXPORTING
comm_head_i = wa_komk
LANGUAGE = ' '
IMPORTING
COMM_HEAD_E =
COMM_MWSKZ =
TABLES
tkomv = gi_komv
tkomvd = gi_komvd.
in wa_komk pass the condition record number.
this you will get from your vbak table
reward points if helpful -
ABAP: Developed new Report for Summarized JIT (Just In Time) calls
Hi to all,
Can anybody please tell me about the following:
· Developed new Report for Summarized JIT (Just In Time) calls: This report is for Delco Singapore needs all Summarized JIT calls created between selected dates to be closed. If JIT call quantity is 0 and GR quantity is also 0, then GR flag for JIT call to be checked and JIT call will not be shown open. If the JIT call quantity is greater than zero and GR for JIT call quantity is zero then JIT call quantity made as zero and GR flag for JIT Call to be checked. Once it is checked the JIT call will not be shown in Open.
Thanks in advance.
Regards
MonalisaOk, I was able to figure out the functions that were confusing me. For my own record and for those that do not know, I will list how to create the objects necessary to add a new report to a menu.
1-Write JSP (should be written just how Oracle writes theirs)
2-Creat function for the new JSP page as System Administrator responsibility
3-Use Sys Admin to add the function to a menu somewhere
4-Using AK Developer responsibility, create an attribute with the label of the attribute being the name of your function you created. Oracle's convention is the name of the attribute has FS in it.
5-Using AK Developer, lookup the ASF_FUNC_SEC_REG region
6-Drill down into that regions attributes
7-Add a your newly created attribute to this region
You would do all these steps for your advanced search page as well, so that in your main jsp, you can call asfPage.setAdvancedSearchPage() with the attribute name of your advanced page.
What I Still do not know is:
(1) My main page keeps coming up saying that there is no default query defined for it. How do you create a default query for a report?
(2) How to get the personalization to work.
Can anyone help?
Thanks! -
How to develop this report/Query that selects records with MAX Value
Hi,
My requirment is to develop a report to show all emp whose policy is going to expire ith in the user selected date intreval...
Emp_ID--App_Date-Policy_Strt_Date--Policy_End_Date--App_Status
101.01.2007---BlankBlank--
NEW (New application for a Medical Insurance policy raised for employee)
101.01.2007---01.02.200730.05.2007--
COMPLETE (policy issued for emp with strt & end dates)
115.05.2007---01.02.200730.05.2007--
RENEWAL (a application is raised to renew emp policy)
115.05.2007---01.06.200731.12.2007--
COMPLETE (policy issued for emp with strt & end dates)
115.12.2007---01.06.200731.12.2007--
RENEWAL (a application is raised to renew emp policy)
115.12.2007---01.01.200831.05.2008--
COMPLETE (policy issued for emp with strt & end dates)
115.05.2008---01.01.200831.05.2008--
RENEWAL (a application is raised to renew emp policy)
115.05.2008---01.06.200831.05.2009--
COMPLETE (a application is raised to renew emp policy)
So EMP 1 got valid policy untill 31.05.2009.
When a user executes a query to show all employees whose policy expiry date intreval (01.05.2008 to 31.05.2008)
it shouldn't show Emp 1 as he got valid policy untill 31.05.2009 but currently it is showing Emp 1....
How can i achieve this
ThanksHi
Thanks for the update
I created variable on Plc End end
If user enter show all emps whose policy is expiring in MAY (01.05.2008---31.05.2008) it is displaying EMp 1 as well but emp 1 has a policy which expires in 2009
Thanks -
Problem on developing SSRS report in a production environment
Any problem could be caused if have to develop SSRS report in a production environment ?
If so, how it can be prevented?
Thanks!Hi ,
As per my understanding, Normally our environment setup contains Development,testing,preproduction,production and its varies from company to company.
We develop SSRS report in development environment and after testing we deploy it to production report server.
Development environment use development database for creating report like your database IP and credential will use development environment
setup. and production environment use production database for creating report like your database IP and credential will use production environment setup.
Thanks
Neha Prajapati Please Mark This As Answer or vote for Helpful Post if this helps you to solve your question/problem. -
Is it possible to develop the control charts in WAD.
Hi Gurus and Experts
We need your suggestions to go futhure with our requirement.
Right now KPI's are currently displayed in graphical form with the
ability to drill down into WO's( Work orders) from the graph page. our
new requirement is to get exactly the same set of information captured
and presented in control chart form. This is to be an adjunct. to, not
replace, the existing graphical set of data. Upper and lower control
limits will be set initially by the business, and the same drill down
functionality should be available from the control chart. The charts
can be displayed seperately from the exisiting set of charts if this
makes it easier.
Can you please suggest us whether is it possible to develop the control
charts and also have the functoinalities of the existing dashboards
(example drill down of WO's using the control charts) in WAD or through
viusal composer
Waiting for your responses..
Thanks
Ravi...Hello dj_page!
Thanks for the answer, but I know this already.
My problem is, that the small picture in the side panel and the histogram in LR5 are bigger than in LR4.
The two pictures are showing the difference between the versions.
On the left hand (LR4) you can see a smaller preview and histogram than on the right hand (LR5).
In each version you can change the size of the side panel only as small as the preview-window is.
The pictures are also showing the smallest size of the side panel in each version. -
Is it possible to use an XML Data Template to create a report in APEX?
Hi,
I have created an XML Data Template in BI Publisher passing one parameter and running two queries, then created an RTF Document Template to present the data.
I can create a nice report in BI Publisher using the two elements. I have used RTF Document Templates to publish reports in APEX but the data comes from a Report region running a single query.
I would like to run a report based in this kind of XML Data Template, in order to use several children queries related to a parent query. Is it possible to do it in APEX, or you have to use BI Publisher?
Francisco
===========================
Below is a simple data template definition:
<dataTemplate name="cotizacion_template" description="Prueba de data template para cotizaciones" dataSourceRef="dbxprts">
<parameters>
<parameter name="p_id_cotizacion" dataType="character" defaultValue="1009" include_in_output="true"/>
</parameters>
<dataQuery>
<sqlStatement name="header_query">
<![CDATA[select id_cotizacion, fecha_cotizacion, id_clipro from f_cotizaciones where id_cotizacion = :p_id_cotizacion]]>
</sqlStatement>
<sqlStatement name="detail_query">
<![CDATA[select id_cotizacion as id_cot_child, id_detalle_cotizacion, partida, cantidad, id_producto from f_detalle_cotizaciones where id_cotizacion = :id_cotizacion]]>
</sqlStatement>
</dataQuery>
<dataStructure>
<group name="F_COTIZACIONES" source="header_query">
<element name="ID_COTIZACION" value="ID_COTIZACION"/>
<element name="ID_CLIPRO" value="ID_CLIPRO"/>
<element name="SUMA_CANTIDAD" value="F_DETALLE_COTIZACIONES.CANTIDAD" function="SUM()"/>
<group name="F_DETALLE_COTIZACIONES" source="detail_query">
<element name="PARTIDA" value="PARTIDA"/>
<element name="CANTIDAD" value="CANTIDAD"/>
<element name="ID_PRODUCTO" value="ID_PRODUCTO"/>
</group>
</group>
</dataStructure>
</dataTemplate>Hi,
I have the similar question. I used data templates in BI Publisher but now I want to use the same data template in Apex to print some reports.
I tried to some examples but these were only using report queries. I also tried with the Web Service but this didn't work for me either maybe because I didn't
used it in the right way. When I used the WS I received the binary of the report so the WS worked it was just the how and where to use it that didn't work for me.
Now this older entry is BUMPED maybe we find a solution for our problem this way.
regards,
Steven
Maybe you are looking for
-
I have used Firefox for 3 years on all my computers. However, Firefox 5 on my Windows 7 64-bit laptop locks up. I want to uninstall it and use an earlier version. Also, the "key' in the address bar to 'remember the password' for this site will NOT be
-
Does 6120 classic support TV out from the AV 2.5-m...
Since there is a outlet called "AV connector" on the Nokia 6120 classic, is it possible to use the Nokia AV cable "CA-75U", an accessory of N95, to output video footages to TV ? I would Love to purchase the CA-75U if it has this function. Thanks for
-
Please how can I reinitialized all command and my indicator of a VI in one time ?
I have more than 60 command and indicator in my VI and I want to reinitialized them in one step Please help me ( In english or french, )
-
K3b (1.70.0) error after alst update
Hi, I'm on a fully updated 32b Arch/KDE 4.4.1. I can't burn a blank DVD (see log below). The default temp directory of K3b has plenty (6.9 GB) free space. Please advise. Thanks Miki Badt -------------K3b log-------------- Devices PHILIPS DROM5016L 9
-
TS4147 Question on syncing between my iphone, Outlook and the Cloud
I can enter/revise contacts on Outlook on my PC (faster than doing it on cloud) and they go to my iphone under 'all from my PC' which is great, but how do I get those same contacts to copy to the cloud and, if I enter contacts on my iphone they go on