Is it possible to ensure ESB routing rules are executed sequentially

Hi,
I have an ESB that updates a database table and updates a file
My requirement is to update the file only when the database update has been completed. Is it possible in Oracle ESB.
I have noticed that in general, the rules are executed sequentially (although visually the diagram shows all being executed parallely, I have noticed the rules work sequentially in practice, but I am not sure if this is actually a fact or mere coincidence)
--Amit
Edited by: AmitSoaDev on May 9, 2009 9:45 PM

You can't get it to do sequencially. What you can do though is to put the insert / update into a procedure. This has output, you use this output to then go and update the file.
The issue with this is that you have to pass the payload for the file through the PL/SQL.
cheers
James

Similar Messages

  • ESB Routing rule priorities/sequence

    I am new to Oracle ESB and I have written a flow which contains a set of rules.
    In the first rule, I insert a row into table A.
    In the second rule, I call a Stored Procedure to perform operations on the data inserted into Table A in rule1.
    In the 3rd rule, I log some information into log table.
    I have written these rules in a sequence in a Routing Service.
    But when I see the ESB control to check how it performed, I see it performing insert into TableA as the 2nd or third rule.
    Please tell me what is controlling this sequence.
    Thanks,

    Hi.
    It should work in the order as expected.
    Check that your routing rules have the Execution mode marked as Synchronous.
    Denis

  • If ESB routing rules supports XSLT2.0 ?

    If routing rules supports XSLT2.0 ? Especially xsl:character-map.
    Ja have problem with transform document with opaque schema to opaque schema changing characters ( sometimes one char to many chars ). If this possible?
    Any other solutions?

    Have you tried setting
    "<xsl:stylesheet version="1.0" to "2.0" and manually edit the xsl to use the 2.0 functions?
    Im not sure if this helps, i would give it a try.

  • Routing Rule

    Hi,
    I have an idoc imported in XI.  It comes with standard message type while importing .
    I need to route this IDOC to two different systems.  But the problme is the Message type is different for both of this system, but the IDOC type is same.
    And the RCVPRN is also different.
    Isit possible to put in Routing rule as the IDOC message type can\t be changed.
    Regards,
    Anandh

    Hi,
    You need to use two seperate Message Mappings as while processing the IDOCs via receiver determination to receiver SAP system, it will check for the IDOC Metadata.
    If the IDOC metadata i.e including the Message Type for Basic IDOC Type will not be matched then that would create problem while processing the idoc.
    Even if the control records are manipulated as per the required Message Type and the RCVPRN, you need two different Mappings as well as seperate receiver determinations.
    Thanks
    Swarup

  • Error in Invoking all the routing rules if one of them fails

    Hi,
    I have an ESB which has 4 routing rules to route to 4 different systems. If one of my routing errors out, other routing rules are not getting executed. For ex, if my ESB system has 4 different traget systems and 4 routing rules. If there is an error in invoking system 2 then, system 3 and system 4 routing rules are not getting executed. How to make them(system 3 and system4) executed even when there is error in some other invocation of system(system 2)?
    Kindly reply asap as it is urgent.
    Thanks,
    Lakshmi S

    You can't in that way, if you want to make them independent in ESB build 4 different services using the same source otherwise you have to build BPEL app for that.

  • Parallel or sequential routing rule and recovery

    I'm trying to implement fault handling via fault policies for a composite, to get faults into the error hospital so recovery is possible.
    The fault I'm trying to catch is a service call from a mediator component, but for that to work I have to change the routing rule from sequential to parallel.
    So far no problem, it's working.
    There are a few synchronous services I want to be able to recover as well, but this is not supported:
    "parallel routing rules are not supported for Oracle Mediators with synchronous operations".
    Is there another way to get instances of synchronous services into the error hospital for recovery?

    Hi ,
    Check the below blog to set your conditions using condition and expression editor in your receiver determination
    /people/shabarish.vijayakumar/blog/2006/06/07/customise-your-xpath-expressions-in-receiver-determination
    Let me know if you need any further clarifications on this.
    Thanks,
    Sekhar D

  • Business connector routing rule problem

    Hi All, I am currently working with BC 4.0 and trying to change the service via developer and I see the changes are not at all reflected when I execute it.
    Also, even though I do not have routing rule for executing a service from a RFC call, the old and hidden service is getting executed and do not know where the old service can be stored and how the routing rule is getting triggered even though i do not see in webconsole-->routing rule tab.
    I tried to reset the cache in developer and also in the server. But all I see is old service is getting executed with out routing rule and the code for old service.
    I would be greatful if someone can help me on this.

    HI,
    Once done modification need to active in change list window after that refresh cache it will reflect, generally it will take time to reflect due to server application burden.
    Most of the routing rules are mentioned in receiver determination condition window, check it once again.  It will solve

  • How to access/update Routing Rules in WorklistApplication console ?

    Hi,
    I have created few Routing Rules in my Human Task and routing is properly working.
    But when I tried to search these Routing Rules in WorklistApplication console (via weblogic which an admin user)
    I couldn't find any Routing Rules, However all other rules (rules for list building) that I had created for my human task are available in WorklistApplication.
    I want to know how to access/update these Routing Rules in WorklistApplication ?
    regards,

    Hi,
    Even when I deployed the sample application workflow-106-IterativeDesign provided at http://java.net/projects/oraclesoasuite11g/downloads/directory/HumanWorkflow?field=date&order=asc , the routing rules are not appearing in WorklistApplication console.
    is this a bug ?
    regards
    Edited by: user10303338 on Oct 10, 2011 10:46 PM

  • Echo static routing rule

    Hi all,
    Can some one please explain to me when i can use the echo static rule in a mediator component.
    oracle student guide present the echo service like this : "the echo service, to use an internat echo mechanism that enables the request message to be echoed as a response message, which can be transformed before returned to the caller"
    any help are welcome.
    thanks

    According to the documentation Echo is available for the follwing patterns
    The echo option is supported only with the Mediator interfaces having the following types of WSDL files:
    Request/Reply
    Request/Reply/Fault
    Request/Callback
    Note:
    The echo option is not available for Mediator interfaces having Request/Reply/Fault/Callback WSDL Files.
    The echo option is available for synchronous operations like Request/Reply and Request/Reply/Fault.
    Note:
    The echo option is available for the synchronous operations only when the routing rule is sequential because parallel routing rules are not supported for Mediators with synchronous operations.
    For synchronous operations, having a conditional filter set, the echo option does not return any response to the caller, when the filter condition is set to false. Instead, a null response is returned to the caller.
    The echo option is available for asynchronous operations only if the Mediator interface has a callback operation. In this case, the echo is run on a separate thread.
    Note:
    The asynchronous echo option is available only when the routing rule is parallel. To use the echo option, then sequential routing rules are not supported for Mediators with asynchronous operations.
    You can use the follionw link for further information
    http://download.oracle.com/docs/cd/E15523_01/integration.1111/e10224/med_createrr.htm

  • Complex routing rules in EBS

    Hi,
    I have a situation where the routing rules are complex (involving several web service calls and DB lookups) and cant be done in a Mediator.
    In this scenario, should I create an EBF and implement these additional lookups and routing logic there?
    Or should I change the EBS from Mediator based composite to a BPEL based composite?
    Or simply create an additional BPEL within EBS and call that from Mediator?
    Any other options?
    Please let us know what Oracle recommends in such situations.

    It depends what these external services actually are. If we consider these services helper services in a sense similar to a rule engine, calling them directly from the EBF is no issue.
    If these services are rather application services, then they should preferably have a canonical facade and the EBF would call them through the same or another EBS - depending on which canonical it would be.
    Gerhard

  • Is it possible to update the human task payload without using worklist API but only using advance routing rule.

    Hi,
    I have one human tasks in BPEL process in which i am using different stages and with using advance routing rules i am routing my task payload to one stage to another.My payload has Task Status and Branch,after approving the human task from first stage I want to send modified value of the Task Status to the next stage without using worklist API or manual updation but only using the advance routing rules,is it possible ??? If anyone have any idea about this than please enlight me with your valuable solutions and  advices...
    Thanx
    Regards
    Ajral

    Hi SamGoe,
    According to your description, my understanding is that you want to update the PoerPoint slide from SharePoint 2010 slide library automatically.
    It seems to be not necessary to use Macros. SharePoint provides an OOB way to notify you to check for update to the slide library slides when you open the presentation. PowerPoint does this because you selected the option
    Tell me when this slide changes when you copied the slides from the library.
    More information, please refer to the link below:
    http://office.microsoft.com/en-us/powerpoint-help/sharepoint-slide-libraries-ii-use-slides-in-the-library-RZ010254089.aspx?section=6
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • Extending routing rules

    Hello All,
    Just wondering how to extend routing rules and route the message to a inbuilt legacy system and The out of the box PIP provide integration between two systems say siebel and EBIZ, customer also wanted to route the message to a legacy system, do i need a develop a Custom EBS or add new routing rule to EBS?
    Would appreciate your help..

    I have not used the PIPS but within the AIA Foundation Pack (v2.4) there is a concept of creating an EBF (Enterprise Business Flow) in the docs. It is summarized as
    "An EBF is needed when an enterprise business Service (EBS) operation needs to be implemented with a set of tasks and involves invoking of multiple services. An EBF can invoke only another EBS. In no situation should an EBF invoke and ABC service directly."
    This may be possible, if not then adding a routing rule to the ESB/Mediator Service would seem the logical step.
    HTH

  • Exception in creating XSLT transform for ESB Routing Service

    Hi,
    I am trying to create a Routing service in an ESB project. When I try to create the XSLT in a routing rule I get this error "Error while reading wsdl file esb:///ESB_projects/...../ship.wsdl ... Failed to read WSDL file at location esb:///ESB_projects/...../ship.wsdl . java.net.Socket Exception.
    I am able to create and register other adapter/soap services on the ESB server but not able to create this transform.Could anybody guide me as to how to resolve this?
    Regards,
    Sri

    The file doesn't physically exist on the server. If you explore the subfolders of the %OH%\integration\esb\oraesb folder, you'll see how ESB projects are deployed.

  • How is an Order Routing rule connected to the IC Webclient Profile

    I created a simple ERMS order routing rule that If priority equals very high then route to John Smith whom is assigned to the IC Web position in PPOMW.
    When I create a service ticket and mark it very high and choose the ESCALATE button the message no rule for routing was found. 
    I don't see anyway to connect this rule to our IC Webclient profile, or why the rule wasn't envoked. Will give points.
    Edited by: John Burton on Apr 21, 2008 2:54 PM

    Hello Glenn,
    Yes, you are correct. In addition to creating a Rule Modeler policy via the IC Manager role (accessible from the BSP view or Enterprise Portal), the business user also needs to request that IT (or someone) add the name of the Rule Modeler policy as an attribute of the RE_RULE_EXEC service for the applicable Service Manager profile in the IMG configuration for the relevant Rule Modeler context (Order Routing, ERMS, etc.). I certainly agree with you that the business user and the IT user as generally two different people. And if they are the same person, Sarbanes Oxley probably has something to say about that Your point is definitely valid. Perhaps in the future we need to be more considerate of the distinction of job responsibilities of business user versus IT user when designing products and solutions.
    By the way, just as an aside... some Rule Modeler contexts can only use one Service Manager profile (for example Order Routing must always use a Service Manager profile called "SAP_ORDERROUTING") while other contexts can use multiple Service Manager profiles. For example, as of CRM 2005 (CRM 5.0) it is possible in transaction CRMC_ERMS_SM_PDET to assign different Service Manager profiles directly to different inbound email addresses for ERMS. And by assigning a different Rule Modeler policy to each Service Manager profile, you can use different root/default Rule Modeler policies for each incoming email address.
    Warm regards,
    John
    Edited by: John Burton on May 1, 2008 10:01 PM

  • Asynchronous routing rules fails in soa suite 10.1.3.5.1 on wls 10.3.1

    Hi,
    I have been testing my 10.1.3.4 esb projects in soa suite 10.1.3.5.1 on wls 10.3.1 and these fails when I have an asynchronous routing rule,
    i made a simple test project with a jms dequeue adapter and a router with asynchronous routing rule to a file adapter.
    Thanks Edwin
    oracle.tip.esb.server.common.exceptions.BusinessEventRetriableException: Failed to enqueue deferred event "oracle.tip.esb.server.dispatch.QueueHandlerException: Publisher not exist for system "{0}"
         at oracle.tip.esb.server.dispatch.InitialEventDispatcher.deferEvent(InitialEventDispatcher.java:719)
         at oracle.tip.esb.server.dispatch.InitialEventDispatcher.processSubscriptions(InitialEventDispatcher.java:636)
         at oracle.tip.esb.server.dispatch.EventDispatcher.dispatchRoutingService(EventDispatcher.java:90)
         at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatch(InitialEventDispatcher.java:172)
         at oracle.tip.esb.server.dispatch.BusinessEvent.raise(BusinessEvent.java:2011)
         at oracle.tip.esb.server.dispatch.BusinessEvent.raise(BusinessEvent.java:1470)
         at oracle.tip.esb.utils.EventUtils.raiseBusinessEvent(EventUtils.java:122)
         at oracle.tip.esb.utils.EventUtils.raiseBusinessEvent(EventUtils.java:68)
         at oracle.tip.esb.server.service.impl.inadapter.ESBListenerImpl.processMessage(ESBListenerImpl.java:726)
         at oracle.tip.esb.server.service.impl.inadapter.ESBListenerImpl.onMessage(ESBListenerImpl.java:411)
         at oracle.tip.adapter.fw.jca.messageinflow.MessageEndpointImpl.onMessage(MessageEndpointImpl.java:358)
         at oracle.tip.adapter.jms.inbound.JmsConsumer.doSend(JmsConsumer.java:718)
         at oracle.tip.adapter.jms.inbound.JmsConsumer.sendInboundMessage(JmsConsumer.java:586)
         at oracle.tip.adapter.jms.inbound.JmsConsumer.send(JmsConsumer.java:402)
         at oracle.tip.adapter.jms.inbound.JmsConsumer.run(JmsConsumer.java:321)
         at weblogic.connector.security.layer.WorkImpl.runIt(WorkImpl.java:108)
         at weblogic.connector.security.layer.WorkImpl.run(WorkImpl.java:44)
         at weblogic.connector.work.WorkRequest.run(WorkRequest.java:95)
         at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: oracle.tip.esb.server.dispatch.QueueHandlerException: Publisher not exist for system "{0}"
         at oracle.tip.esb.server.dispatch.JMSEnqueuer.createConnection(JMSEnqueuer.java:200)
         at oracle.tip.esb.server.dispatch.JMSEnqueuer.<init>(JMSEnqueuer.java:110)
         at oracle.tip.esb.server.dispatch.JMSEnqueuer.<init>(JMSEnqueuer.java:82)
         at oracle.tip.esb.server.common.RuntimeESBSystem.getDeferredEnqueuer(RuntimeESBSystem.java:404)
         at oracle.tip.esb.server.dispatch.InitialEventDispatcher.deferEvent(InitialEventDispatcher.java:708)
         ... 20 more
    Caused by: oracle.jms.AQjmsException: JMS-243: Topic OracleASjms/ESBDeferredTopic niet gevonden.
         at oracle.jms.AQjmsError.throwEx(AQjmsError.java:353)
         at oracle.jms.AQjmsSession.createTopic(AQjmsSession.java:2293)
         at oracle.tip.esb.server.dispatch.JMSEnqueuer.createConnection(JMSEnqueuer.java:185)
         ... 24 more
    Caused by: oracle.jms.AQjmsException: JMS-190: Wachtrij ORAESB.OracleASjms/ESBDeferredTopic niet gevonden
         at oracle.jms.AQjmsSession.getTopic(AQjmsSession.java:5084)
         at oracle.jms.AQjmsSession.createTopic(AQjmsSession.java:2286)
         ... 25 more
    Caused by: oracle.AQ.AQException: JMS-190: Wachtrij ORAESB.OracleASjms/ESBDeferredTopic niet gevonden
         at oracle.AQ.AQUtil.throwAQEx(AQUtil.java:196)
         at oracle.AQ.AQOracleSession.getQueue(AQOracleSession.java:721)
         at oracle.jms.AQjmsSession.getTopic(AQjmsSession.java:5059)
         ... 26 more

    Edwin,
    I received the same error when soa10g_server1 starts.
    I changed in ESB_PARAMETER table on ORAESB schema the following parameters:
    PROP_NAME_CONTROL_TCF_JNDI     OracleASjms/ControlTCF
    PROP_NAME_MONITOR_TCF_JNDI     OracleASjms/MonitorTCF
    PROP_NAME_ERROR_TCF_JNDI     OracleASjms/ErrorTCF
    PROP_NAME_ERROR_RETRY_TCF_JNDI     OracleASjms/ErrorRetryTCF
    PROP_NAME_DEFERRED_TCF_JNDI     OracleASjms/DeferredTCF
    PROP_NAME_ERROR_XATCF_JNDI     OracleASjms/ErrorTCF
    PROP_NAME_DEFERRED_XATCF_JNDI     OracleASjms/DeferredTCF
    to
    PROP_NAME_CONTROL_TCF_JNDI     ESB_CONTROL
    PROP_NAME_MONITOR_TCF_JNDI     ESB_MONITOR
    PROP_NAME_ERROR_TCF_JNDI     ESB_ERROR
    PROP_NAME_ERROR_RETRY_TCF_JNDI     ESB_ERROR_RETRY
    PROP_NAME_DEFERRED_TCF_JNDI     ESB_JAVA_DEFERRED
    PROP_NAME_ERROR_XATCF_JNDI     ESB_ERROR
    PROP_NAME_DEFERRED_XATCF_JNDI     ESB_JAVA_DEFERRED
    And It's working right now. I hope to you too.
    JP

Maybe you are looking for