Is it possible to have a bad iPad2 WiFi receiver?
I have two iPad2s in the family and one has a better/stronger WiFi signal. They are the same iPad2, same configuration, and same case. I have experienced instances where the iPads are in the same room, side by side and one iPad has a WiFi signal and the other does not. The weak receiver still receives a signal, but if the WiFi signal is weak, one receives a signal and the other does not. Thanks!
It's possible. Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom
Similar Messages
-
Hi can anyone help?before i start i am no comp tech so please dont woffle tech terms or i shall be lost lol ! i have bought hubby ipad2 wifi for his birthday ( saved as hard as i could but couldnt afford 3g version ) how can he connect when there is no wifi available?he hasnt got an iphone so cant run through the data allowance on that but i wondered if there is any devices? it ok when he is in his hotel but during the day he is out and about in his car and cant always find a wifi hotspot !!hope there is a solution :-) thanks
You can get mifi devices which take a sim card and act as a mobile hotspot. I don't know what country that you are in, but have a look in your country's carriers stores for 'mifi' or 'mobile internet' and see if they have anything available - those that need to be plugged into USB ports (e.g. for use on laptops) won't work with the iPad as it doesn't have a USB port.
-
How Can I Tell if I Have a Bad RAM Terminal?
A few weeks ago, my MacBook Pro started freezing several times a day, and it was to the point where I couldn't use it for even 10 minutes. It would also beep three times most of the time that it froze. So I turned it off for like 3 weeks and then took it in to the Genius Bar.
He ran some tests and said it was a RAM issue and I could buy new RAM chips (or whatever) and so I did, and when I installed two of them, my computer wouldn't start. I thought maybe the MHz was too big. I took one out, and the computer worked fine. For thirty minutes. Then BEEEEP beeeeeep BEEEEEP
I removed the one RAM and reseated it in the other terminal, and my computer has been working fine for most of the morning. I am running Chrome and playing youtube, Facebook, uploading pictures, and using iPhoto.
My MacBookPro came with 2 2GB RAMs (1333 MHz). The new RAMs are 2 4GB DDR3 OC3-10666 and compatible with 1333MHz and 1066MHz, according to the package.
The closest Apple store to me is more than an hour drive, and I'm wondering if there are any tests I can do at home. To me, an inexperienced computer repairwoman, it looks like I have a bad RAM terminal. Tonight I will reseat the RAM in the first terminal I tried, and see if it freezes and beeps again. It's possible that it was just seated incorrectly, perhaps?
Please send any and all advice, thoughts, questions, etc. Thank you!As John Galt says, not all RAM is created equal. Crucial.com or MacSales.com (OWC) are well respected Mac RAM vendors.
Rember
<https://www.macupdate.com/app/mac/15837/rember/>
is a wrapper around memtest.
Note: If you Mac refuses to run the app, you can force it by doing Control-Click -> Open, and then agreeing to the dialog box. Rember is an unsigned app, which is why the Mac may complain. The Control-Click -> Open trick is a way to force the Mac to run the unsigned app.
If you are having problems betting into a full Mac OS X GUI, then you might want to get memtest which can be run from the command line in Single-User mode (boot holding Command-S). If you have installed 'Rember' you can find a copy of 'memtest' buried inside
./Rember.app/Contents/Resources/memtest all
the ./ means you have to figure out the front part of the directory path to Rember.app where ever you stored it.
Here are some additional web sites, but keep in mind that 'Rember' is a wrapper for 'memtest' so when those sites discuss 'memtest', 'Rember' is essentially the same thing.
<http://guides.macrumors.com/Testing_RAM>
<http://osxdaily.com/2011/05/03/memtest-mac-ram-test/>
<http://support.apple.com/kb/ht1509>
<http://support.apple.com/kb/PH11342> -
Is it possible to have two (or more) different icloud mail accounts (not alias) under the same apple id? If not what is you best advice for all family members to have their own e-mail and still share the purchases under the same apple id. Thanks
mannyace wrote:
Thanks for the response.
So I basically won't run into any trouble? I
There should be no issues. Its designed to work like that. You don't change Apple IDs just because you get a new device.
mannyace wrote:
Thanks for the response.
Is there any chance that the phones can fall out of sync?
Unlikely. But nothing is impossible. Though I don;t see how that would happen. As long as both are signed into the Same Apple ID / iCloud Account they will be N'Sync. (Bad Joke)
mannyace wrote:
Thanks for the response.
If I get a message or buy an app or take a photo on the iPhone 5, how do I get those things onto the iPhone 6?
If you buy an App, you have 2 ways to get it to the iPhone6: If Automatic Downloads is enabled in Settings->iTunes & App Store, it will automatically download to the iPhone 6 when you buy it on the 5 and vice versa if you buy it on the 6, it will download to the 5.
Alternatively, you can simply go to the App Store App->Updates->Purchased and look for the App there and download it. Purchased Apps will not require payment again. i.e They'll be free to download to the iPhone 6 once purchased.
SMS Messages will sync over using Continuity as long as they are on the same Wifi network. Otherwise, restoring the iPhone 5 backup to the iPhone 6 will transfer all messages received up until the backup was made onto the iPhone 6.
Images, can be transferred either through Photo Stream
My Photo Stream FAQ - Apple Support
Or any Cloud service you want such as Dropbox, or One Drive.
mannyace wrote:
Also, something i forgot to ask initially: Should I update the iPhone 5 to iOS 8 first or does that not matter?
If you want the Continuity features as explained above you need to update the iPhone 5 to iOS 8. Otherwise its not all that important. -
Is it possible to have filters for one account on 3 devices ? And have the same results/folders.
I have one email account on 3 devices and I need to filter all received emails, on all 3 devices. Same folders and same filters.
If I create a filter rule on one PC then I can't find the filtered emails ( that are in the new created folder on PC no.1 ) on the other devices. What can I do?To answer the question as stated in your topic, it's possible but not easy.
Obviously you can enter the same filters by hand on each installation of Thunderbird, but it's tedious and error-prone. You can set them up on one machine and copy the filter files over to the other machines. Also tedious and error-prone.
The way you describe the messages vanishing from sight suggests strongly that you're currently using POP, and this has no way of making use of shared folders. To continue working in this way, all you could do is set each client to leave a copy on the server for the others and painstakingly manage a set of filters on each and every machine, keeping them in synch by hand and careful management. (And ditto for your folders.) You'd also have to attend to the POP server from time to time to remove accumulated messages left there by your clients.
The real answer to this and your later question is to use an IMAP-connected account, where all your data lives in one place, on the email provider's server, and all your devices simply look at and work with one common set of data. Any filtering, editing, moving, etc you did on one machine would very quickly become visible on the other machines. In fact. the ability for more than one machine to be simultaneously be working on the same message becomes a somewhat worrying possibility. It's not clear if this is a likely event in your scenario.
Even using IMAP, if you filter at the client then you'd still have the issue of managing multiple instances of your filters, and the final part of this is to make use of filtering offered by the server; then the filtering takes place "at source" and you have just one filter set to maintain.
If your current email provider doesn't provide IMAP, and cannot offer it, then there are many alternatives who will. If it's for business then I think you should look for a paid-for service that includes guarantees, backups and an SLA. Your domain provider should be able to offer this.
For personal use, many of the free suppliers are worth considering. Googlemail works well, but if you're uneasy about their pervasiveness, have a look at gmx/1&1. Microsoft's hotmail/live mail/outlook.com offers IMAP. Yahoo! probably does (please check in your locality) but they have a bad track record and a lamentable reputation and I wouldn't want to entrust them with any precious material. -
Is it possible to have too many keyframes in one project in Premiere?
Hi all,
I'm using Premiere 6 on a Windows 7 ULT machine.
Is it possible to have too many keyframes in one project in Premiere?
I'm getting app crashes when I try to re-open a certain project in Premiere 6 and it seems that if that file has over 93 keyframes, then it will not re-open. But I can re-open that exact same project file with 93 keyframes in it, no problem.
But if I go any further and create any more keyframes than 93 in a new re-saved version of the exact same file, then that file will not re-open and I get an app crash... you can see screenshots of the two Windows app crash info panels below that I'm getting from three different bad Premiere project files that I've created so far.
I've tested and tested what is going on here and this seems to be what is causing the bad files. I've re-created the scenario and re-created files with over 93 keyframes from the same base project file that will still open... as soon as I get more than 93 keyframes in this file, then that newly saved file will not re-open after I close and try to re-open it.
This is 75 keyframes in one still image clip, 14 keyframes in another still image clip and 2 keyframes each in two other still image clips in a single project file... that is the limit... if I create any more keyframes in the clip that has 75 keyframes, the new file will save and render, but it won't re-open once it has been closed.
The two slightly different app crash info panels show, in the first one below,
"Fault Module Name: StackHash_e98d"
... and the second one shows,
"Fault Module Name: PREMINFO.dll"
... both messages with a little more different info in each one. I get either of the two error info panels when trying to re-open all three bad files that I've created with over 93 keyframes in them. That is, two of the files alternate between giveing "StackHash_e98d" and "PREMINFO.dll" when trying to open them and one of them always shows the "Fault Module Name: PREMINFO.dll" error.
So even the error messages are inconsistent with two of the bad files.
I've searched the internet for this error in association with Premiere and I've also searched on this forum and found nothing. Can anyone shed any light on this?
Thanks,
digiBill,
Even though I figured out a work around, I was still interested to know if these file opening crashes are related to Virtual Memory.
So on the topic of Virtual Memory... a few months ago I was troubleshooting a different problem in Premeire and I found this information...
"To improve performance in Premiere Pro, adjust the size of the paging file to a maximum of twice the amount of installed RAM."
Previous to that time three months ago or so, I had my Virtual Memory settings at the default automatic setting, but I tried setting my VM to twice the amount of installed RAM, and I've had it set that way ever since, just to make sure I'm optimizing the VM performance for Premiere and other apps.
But that isn't making any difference in this case. Today I also found information in a search that says to troubleshoot StackHash crashes, one should turn off "DEP" in the system settings for the application with the crash problem... according to the paragraph below, from the second post down by Chris on this tdistler.com page... http://tdistler.com/2009/04/10/stackhash-and-application-crashes-on-windows
Even though this was written in 2009 with Windows Vista in mind, many things for Vista work in Windows 7... it says,
"Here’s how 99 percent of Vista users can fix a StackHash failure. I’ll walk you through it step by step:
Method A:
1. Open your Start menu and click Control Panel
2. Browse to “System Maintenance” then “System”
3. In the left panel, select “Advanced System Settings” from the available links
4. You should now see the System Properties Window, which will have three sections. The top section is labeled “Performance” and has a “Settings” button. Click this button.
5. Select the “Data Execution Prevention” tab.
6. Select the option which reads “Turn on DEP for all programs and services except those I select”
7. Use the “Browse” button to locate the executable file for the application you were trying to start when you received the StackHash error, and click Open to add it to your exceptions list.
8. Click Apply or OK to commit your changes."
But I tried this and none of the three problem files that I encountered would open... I still got the StackHash_e98d or PREMINFO.dll crash errors.
So anyway, I'm a ways past that in my project now, just continuing with more keyframes over the number of 78 in separate but identical still image clips... that allows me to successfully work with this project with as many keyframes as I need.
Thanks again,
digi -
Is it possible to have my battery replaced in a foreign country?
Hi guys!
I'm currently travelling and can't go back to my home country yet. Is it possible to have my batteries replaced where I'm currently at?
My phone 's warranty is due next year.
Any possible info on this matter would be greatly appreciated!
Thanks
Xianwjosten wrote:
xian_ang wrote:
there are several listed authorized service providers here though I'm not entirely
sure if they can provide me the the warranty replacement.
They won't/can't.
There is a battery drain issue with iOS 5.0, but you have iOS 4.3.3 on your phone, correct? You could try restoring your phone from backup, but this will install iOS 5.0.1 on your phone(designed to address battery drain issues in iOS 5.0).
They won't/can't do it unless I pay them to do so right?
I've tried restoring from backup but it's giving me an error (3194).
Only option I guess I have left is to wait until I get home and have it serviced under my phone's warranty.... too bad.... I hope there's another way around it.
Thanks again!
Xian -
Is it possible to have a superdrive on a ibook G4 12" ?
I'm definetely new to apple but also vary bad with computers...!
I want to buy an ibook G4 12" but only if I could have a superdrive on it. I understand that I can't buy it with a superdrive, but is it possible to have someone to put it later?
ibook G4 12"Welcome to Apple Discussions.
The answer is yes. You can get a third-party company to put it in for you. However, your machine will most likely not be warranted by Apple anymore, and any hardware problems you have later will either have to be settled by the third-party company or by yourself.
Every third-party company will have their own guarantees and warranties on their service, so if you do decide to do this, you must make sure you know what you're getting yourself into.
Not to mention, the process is usually sort of expensive, and you should be debating as to whether or not you should just buy a 12" PowerBook with a SuperDrive anyway.
Regardless, here are a few third-parties who can perform this for you:
TechRestore
MacService
PowerBook Medic
Brian -
Is it possible to have smaller icons under ios7 with iPhone 4S?
Is it possible to have smaller icons under ios7 with iPhone 4S?
I have an iPAD and my wife has an iPAD mini. The new size of the icons is very bad. What would be nice would be to have a variable under Settings where the user could select. Like small, medium and large. The same amount of space could be allocated per icon, so you would not have to squeeze more icons on a page. It would just allow for some personalization of the pages.
-
I have a bad block. What and how do I save before reinitializing.
Tech Tools tells me that I have a bad block and need to reinitialize the HD. I have been told that all file information will be erased, while programs/applications will not be harmed, so I need to back up my User Profiles (my and my wife's). I have 2 questions:
1. What else besides my user profile should I save (or, to put it another way, what files are NOT in my user profile, and where would I find them)?
2. Once I have reinitialized the HD (supposedly the disc utility should guide me through this), will simply dragging saved user profile (from the thumb drive) onto the HD automatically reinstall all my settings? Must I laboriously redo each program's preferences?In Disk Utility>Security options>Zero out data
Boot from the install disk > select language > DON'T select Continue > instead go to Disk Utility in the MenuBar at top.
http://support.apple.com/kb/TA24002
Don't know if this would help, but for the Mail issue, you could try "Rebuild" in Mailbox from Menu > (select the mailbox) > Rebuild
The AW problem might or might not be related to corruption from the bad blocks that weren't mapped out by zeroing out, or the data that was already corrupted earlier from those bad blocks. After you zero out, you could try re-installing AW. Realize, zeroing out will wipe your drive. If you do this, be ready to re-install everything.
Look over what Limnos wrote earlier. Zeroing and re-installing, clean as much as possible may prove to be the real solution.
Maybe the original damage was only minor, so, before you do this, you could first try repairing the drive (from Disc Utility booted from the disc, "Repair Disc.") Then, if everything is successful, when you are _booted back normally_, repair Permissions. Don't repair them booted from the disc. This might or might not resolve the problem with AW and Mail. At least, if these are the only issues you are experiencing, give this a try before taking the drastic step of a clean install, which involves a lot of work. You can always do this later if you keep uncovering new issues.
See how this goes first and post back with the results. If you take the zero out path, I think you will need to re-format the drive.
EDIT one more thing. You definitely don't want to zero the drive until you have some kind of clone/backup from which to move everything back, or you will lose all your data: mail, documents, music, etc.
Message was edited by: WZZZ -
I have a problem with wifi in my iphone 4s, i already try everything and download latest version 7.1(11D167) but wifi switch is not working, its my humble request to Apple support team that pls resolve this problem as soon as possible because its a prestiage of Apple Company.
Pls inform me how can i resolve the problem of wifi.You have to go to autherized iPhone agent.
-
I have had my IPAD2 for quite a while but haven't activated my cellular data for about a year. I am now trying to activate and when I go to cellular data, turn it on and try to tap view account i just get a message that says "connection to server lost". I could swear the last time I used cellular data you would see the signal in the upper left corner and I only see "no service" there, I am in a location where I know I should have service. Is there something I should do to my IPAD? I tried resetting, I tried clearing cookies and history in Safari (after reading a post n these discussions). I don't know what to do next. My IOS version is 6.1.3. I did go into Network from the general tab and I see it says "SIM not provisioned". HELP and Thank you in advance.
Hello Theresa818,
Thank you for using Apple Support Communities!
It sounds like the cellular data will not activate for some reason on the iPad.
I found this article that will help you resolve this issue here, named iPad (Wi-Fi + Cellular Models): Troubleshooting a cellular data connection, found here http://support.apple.com/kb/TS4249
Check for a carrier settings update.
Update your iPad.
Toggle the Cellular Data setting off and on under Settings > Cellular Data.
Restart your iPad.
Tap Settings > General > About. Locate the Carrier entry and make sure that your carrier is correct.
If your SIM card has SIM PIN enabled, try turning it off: Tap Settings > Cellular Data > SIM PIN.
Make sure you're in an area of good coverage. If the cellular data connection works in another area, contact your carrier to report the original affected area.
Reset network settings: Tap Settings > General > Reset > Reset Network Settings.
Restore the iPad as new.
If none of the above steps resolves the issue, make an appointment at an Apple Retail Store, contact your carrier, or contact AppleCare to troubleshoot further.
I know you may have done one or two of the steps here, so you can skip those.
Take care,
Sterling -
Possible to Have ToC Default to Show Only Top Level (collapse sublevels)?
Howdy!
I'll bet I'm not the only one wishing for this. Let's say you're using Captivate 4's Table of Contents feature with a longish movie of Cp slides, which is chunked into bite-size sections content-wise. In the ToC, though, you can't mimic that same organization scheme; at least, the learner would first need to collapse all the ToC folders you've created so they see only the top-level listing.
This can be a critical issue: keeping the at-first-glance list in the ToC brief enough to be inviting to learners, yet allowing learners to drive which details are currently visible.
A movie's topical hierarchy could be along these lines, for example ...
Section 1 - National Brands
What are National Brands?
Why Are They Important to Our Business?
Working with Nat. Brands
Practice Your Knowledge
Section 2 - International Brands
What are International Brands?
Why Are They Important to Our Business?
Working with Intl. Brands
Practice Your Knowledge
You'd like to organize the ToC to show only the section titles (1st level) and to suppress the 2nd-level detail (slide titles) until the learner chooses to expand the folder to see those details.
I've tried things like grouping the slides into sections in the Storyboard view and organizing the slides into sections strictly within the ToC -- both to no avail.
Has anyone solved for this need yet?
I'm all ears, and you'd be doing learners of the world a huge favor.
Thanks!Hi, Jim.
Thanks for being 'on the case' and looking into this so quickly. Your
findings are encouraging, although my user base is generally working with
IE 6 and FP8 or 9.
Since the only thing I may influence is getting IT to help push out FP10,
I'm hoping it's more of a player- than a browser-version issue.
I'll test things out by Monday and let you know the results. Wish me luck!
Dave
From: Jim Leichliter <[email protected]>
To: Dave Tressler <[email protected]>
Date: 03/26/2010 06:02 PM
Subject: Possible to Have ToC Default to Show Only Top Level (collapse
sublevels)?
Dave,
I just tested this on my local web server and it worked fine. I created a
blank project with 8 slides. Created my TOC with grouping... 2 slides in
each group. I turned on self paced learning. I tried with and without the
widget and it picked up where I left off in either case. See
https://docs.google.com/leaf?id=0B86WuEq6SVwRNWIwMjhjODctMjE2Yy00MWE2LWI5YzEtMGQxYzNjOWQ0Z mI2&hl=en.
I published using FP10 and IE8 to view. Notice any difference between
your project and this one?
Thanks,
Jim Leichliter -
Is it possible to have an attachment within a pdf doc print at the same time the main doc prints?
Okay, so this may be kind of a weird question. We have some users who are wanting to add a page to an already existing xml document and correct me if I'm wrong, but I've read that it's not possible to add/delete pages from a pdf that's in xml format. Since that is not possible, I have added the page to the xml document as an attachment. Now what I am wanting to know is if it is possible to have the attachment print out at the same time as the main document. We are using the latest version of Adobe Reader and I have access to Adobe Acrobat Standard 9 & 10 and then I have access to Adobe Acrobat Pro 7. I've been unable to find anyting via google or by searching this forum so hopefully I'll draw out some kind of smart cookies and we'll get this figured out. I appreciate any and all input!
Thanks,I know of no way to do this with Reader or XML.
-
I have the latest ipad2 and trying to print a doc. It does not find my printer . My printer is a canon mp990 wifi. Can anyone tell me what I am doing wrong?
Hi,
If you are trying to utilize AirPrint you need an HP compatible printer listed here.
http://www.apple.com/ipad/features/airprint.html
Scroll down.
Carolyn
Maybe you are looking for
-
How can I access my stored files from a previous backup?
I recently had to restore my Macbook and I backed up my files on a Lacie hard drive. However, now when I try to access those files It says that I do not have permission. Is there any way to access important files without having to do a full restore o
-
What is load balancer in fms cluster and how to configure it and testing fms clustering
Hey guys, I am new to fms and clustering the fms server in origin-edge mode.But i am confused actually what is load balancer and how to configure it . After configuring , how to test and confirm that fms clustering is working.Is there any
-
Why can't biometrics can't log me on via password or fingerprint
I have a HP DV-6 laptop. Today when I turned on my laptop neither the fingerprint nor password would work. It said "cannot find in store" or something like that. I've turned my laptop on safe mode and am able to access the laptop this way only. If I
-
Bank reconciliation for existing payments
I have a problem with the Bank Statement Reconciliation (BSP) processing introduced in version 2007A. I cannot work out how to reconcile to payment transactions which already exist. I have tried the documentation and the webex, but they do not seem t
-
Officejet 67000- unable to print cardstock (gartner wedding invitations)
Hi I have recently purchased wedding invitations from Michaels. I was directed to download templates from www.gartnerstudios.com. Using my ipad and the app cloudOn, I was able to complete my templates. However, when trying to print , I am receiving