Is it possible to have only one line per item in InfoView document list?

Hi,
my customer is complaining about InfoView (Document list) wasting too much screen estate. For each list item (report, folder etc.) InfoView displays two lines, one for the name and one for the description. Is it possible to configure InfoView to display one line only, leaving out the description?
Regards
Joern

Hi Joern,
You can set the user preferences to not display the description in the section: Document List Display
Regards,
Julian

Similar Messages

Filtered the data to get only one data per day

Hi,
From the excel file below I have Power (from Hg Lamp) vs date.
I would like to filtered the data to have only one data per day. So when there are many data for one day, I want the data with Max Power (and delete the others).
In the test vi below I filtered data by compared the data 1 by 1. So I reduced the number of data but I still have date with many data.
I would like to count the number of data per days and keep the data with max power, but I don't know how to do it.
If you have any ideas...
Thanks
Geof
Attachments:
Test.xls ‏227 KB
Test.vi ‏48 KB

I did it
Thanks
Attachments:
Test.vi ‏48 KB

Multiple line item in billing but only one line item in accounting document

Hi Everyone,
I am having one scenario in which sales order has more than one line item. Only one billing document is create for all line items in Sales Order but billing document contains as many items as sales order has. In accounting document of billing i find only one customer line which has total amount of all line items in billing as debited. My requirement is Accounting document also should have as many line of customer-debit as in billing items i.e sales order. For example :
(1) Sales order has 2 line items.
(2) Billing document is only ONE and has 2 line items
(3) currently accounting document has only ONE line of Customet - Debit ( Total amount of both items)
My requirement is
Accounting document should have 2 line item of customer - Debit
Customer - Debit (amount of first line item)
Customer - Debit (amount of Second line item)
Sales - Credit
How can it be done ?
Regards,
Manish

Hi,
This is the SAP expected behaviour
As far as the values correspond to same account key and same GL account as per account determination, then ti will be posted as a single line item in FI document.
If you want the customer specific items to be posted in two GL accounts , then you have to do the account determination that way.
For example, you should have a condition table in FICO as follows.
Sales org/ Account key / Customer
For this condition table, the entries shoudl be as follows.
5110/ERS/Customer A GL ACCOUNT IS 5000100
5110/ERS/Customer B GL ACCOUNT IS 5000200
In this case, there will be 2 entries for the invoice instead of just one line entry.

Only one line is getting printed in Table in Smartforms (ECC 6.0)

Hello Sir,
I am new in ABAP and doing Smartforms (ECC 6.0) on project from customer side.
I have to deliver the object in time and it is already late, please help me.
This is my question:
Object : Stock Transport Order.
=======================
I have created Table in main window after Program Line Node.
>Main Window
>>Code2
>>Table1
>>>Header
>>>>Row1
>>>>>Cell1 to Cell10
>>>Main Area
>>>>Row2
>>>>>Cell1 to Cell10
>>>Footer
>>>>Row3
>>>>>Cell1 to Cell10
I have mentioned internal tabel as well work area table in "DATA" tab in table Node.
In Row1 I have created Text Node in every cell having Column Heading.
In Row2 I have created Text Node in every cell having variable.
In Row3 all cells are blank.
On output only one line is getting printed
What could be the reason.
=====================================================================
This is Code1 (is in the beginning of the form in window1)
==========
*& Selection of Purchasing Document No,Plant,Short Text,Quantity,Material No,
*& Gross order value in PO currency
select single ebeln werks txz01 menge matnr brtwr
from ekpo into
(v_ebeln,v_werks,v_txz01,v_menge,v_matnr,v_brtwr)
where ebeln = DOCNO.
*& Selection of Plant address
select single adrnr from t001w into v_adrnr
where werks = v_werks.
*& For Selection of phone,fax
select single name1 tel_number fax_number from adrc into (v_name1,phone,fax)
where addrnumber = v_adrnr.
*& For E-Mail Selection
select single SMTP_ADDR from adr6 into mail where addrnumber = v_adrnr.
*& For CST No.,GST No.
select single J_1ICSTNO J_1ILSTNO
              from J_1IMOCOMP into (CST,GST)
              where werks = v_werks.
*& Selection of Vendor Address No., PO date
select single reswk aedat from ekko into (v_reswk,v_aedat) where
ebeln = v_ebeln.
*& Selection of Supplying (Issuing) Plant address
select single adrnr from t001w into vendor
where werks = v_reswk.
*& Selection of storage location
select single lgort from ekpo into v_lgort where werks = v_werks
and ebeln = v_ebeln.
*& Selection of description of storage location
select single lgobe from t001l into v_lgobe where werks = v_werks.
*& Fetching data into internal table from ekpo
select ebeln ebelp matnr txz01 menge brtwr from ekpo into corresponding fields
of table iekpo where ebeln = v_ebeln and werks = v_werks.
Fetching data into internal table from marm for Pck
select * from marm into corresponding fields of table imarm for all entries
in iekpo where matnr = iekpo-matnr.
Fetching data into internal table from mara for Pack Type Code
select * from mara into corresponding fields of table imara for all entries
in iekpo where matnr = iekpo-matnr.
Fetching data into internal table from tvegrt for Pack Type Description
select * from tvegrt into corresponding fields of table itvegrt
for all entries in imara where magrv = imara-magrv.
Fetching data into internal table from eket for Receipt Date
select * from eket into corresponding fields of table ieket
where ebeln = v_ebeln.
Selection of Order Type from mepo_topline
*select single bsart from mepo_topline into v_bsart where ebeln = v_ebeln
*and superfield = v_werks.
*if v_bsart = 'UB'.
xhead = 'Replenishment Order'.
*eleseif v_bsart = 'ZSTO'.
xhead = 'Purchase Order'.
*endif.
*& Defining of variable for Printing Line Serial Number,Total Quantity,
*& Total Value
=====================================================================
This is Code2 (is in the main window)
==========
xln = 0.
tmenge = 0.
tvalue = 0.
Loop for printing table
loop at iekpo into wekpo.
xln = xln + 1.
xmatnr = wekpo-matnr.      " Material Number (Code)
xtxz01 = wekpo-txz01.      " Material Name
xmenge = wekpo-menge.      " Line Quantiy
xbrtwr = wekpo-brtwr.      " Basic Rate
*& Pck
read table imarm into wmarm with key matnr = wekpo-matnr.
xpck = wmarm-umren.        " Packing Size
*& Num
xnum = xmenge / xpck.      " Numbers of Packing
*& Line Value
xvalue = xmenge * xbrtwr. " Line Basic Value
*& Packing Type
read table imara into wmara with key matnr = wekpo-matnr.
xpacktype = wmara-magrv.   " Packing Type Code
*& Packing Type Description
read table itvegrt into wtvegrt with key magrv = imara-magrv.
xpackdesc = wtvegrt-bezei. " Packing Type Description
*& Receipt Date
read table ieket into weket with key ebeln = v_ebeln.
xrcpdt = weket-eindt.      " Receipt Date
*& Report Total
tmenge = tmenge + xmenge.
tvalue = tvalue + xvalue.
*& Serial No. increment
endloop.
=====================================================================
Thanks and Regards,
Yogesh Pathak

Did you debug and check the umber of values in internal table before calling the TABLE Node....
seeing all SELECT SINGLE along with WHERE = condition and no loop call on them, my assumption is there will be on record only. Check in Debug mood. Search forum to find how to debug a smartform.

Error " TR should have atleast one line item "

Hi,
While trying to create TO for the TR , system through the error " TR should have atleast one line item "
but the TR have the line item.
pls trhu some light. actually it properly working in development server but not working in production.

Hi
Thos error message does not make any sense if what you are saying is true in that the TR does have one line item.
The only thing I can think of is Has the stock situation changed since the TR was created.
Do you in fact have any stock?
Check the TR in LB02 to make sure it is OK
I hope that this helps
Frenchy

Create a business model when we have only one source table

Hi,
How to create a business model when we have only one source table in Physical layer
Regards
Swathi

This is very much possible and feasible. Its called as Single Table model. Good example is SA System Subject Area where we just have a single physical source. No need to create Alias in Physical. Simply use the same table twice in BMM with one Logical Table as Dummy Fact..Like say Count of Users (aggregated). Then apply normal Complex join in BMM and present in presentation layer.
http://gerardnico.com/wiki/dat/obiee/single_table_model
http://gerardnico.com/wiki/dat/obiee/sasystem

Is it possible to have a phone line connected to a Mac Mini (OS X10.8.2) so you can use your computer with Parallels (Windows xp) to dial into a modem to download data being collected and stored at the remote location?

Is it possible to have a phone line connected to a Mac Mini (OS X10.8.2) so you can use your computer with Parallels (Windows xp) to dial into a modem to download data being collected and stored at the remote location?

Hi, do you mean a real Dial-up Modem as in the old days?
As I recall, the Apple USB Modem won't work in 64 bit OSes, but there are others that will, I think this is one of them...
http://www.zoomtel.com/products/dial_up_external_usb.html
Or is the Modem on the other end Cable/DSL/FiberOptic?

Write To Measurement File Only One Line Of Data

Hello,
I have an express VI setup to acquire a single channel of strain running in a simple while loop. The output is wired directly to a Write To Measurement Express VI. However, the resulting measurement file contains only one line of data.
I have tried changing the settings of the VI to no avail. I feel that I must be missing something basic. My while loop is setup to take one measurement on demand for each loop. I am assuming the VI knows to write each loop as a new line of data?
Thanks for any help,

Did you choose "append to file" in the Express VI configuration settings?
You need to upload your VI for further help. It's impossible to help someone debug a problem without the code to look at.

How to get only one line between tables in database diagram?

Hi!
I'm using jdev 10.1.3. I've got a database schema with a lot of tables. I would like to have them in one database diagram in compact view with only ONE line between two tables even if there are more foreign key columns between the two tables. In the shema there are a lot of foreign keys with multiple columns and the diagram is hard to read.
How to archieve this?
Thanks,
Carsten.

hi,
u should use the same variable across all your queries.In the WAD there is a propoerty "display same variable once". Check that.
hope it helps,
regards,
Parth

How to have a close tab button when you have only one tab ?

I'm using FF 24.0 on Win 7 enterprise x64.
I would like to have an option to have a close tab button ("x") when you have only one tab.
Is this possible ? How ?
If not how to submit a feature request ? I did it 10+ times with feedback but didn't see any change.
Thanks

Thanks again for the "close button" addon advice. I tried it but no luck, the close button doesn't appear on tabs but in the toolbar (which I do not display).
So the problem remains for me.

In this report i have marked one line..if this width 30,i need to multiply by a number 0.3 and if the width =30,it multiplies by 0.37...how to use this logic here..??? anyone can help??

In this report i have marked one line..if this width < 30,i need to multiply by a number 0.3 and if the width >=30,it multiplies by 0.37...how to use this logic here..??? anyone can help??
Declare @FromDate Datetime
Declare @ToDate Datetime
Declare @SCCode nvarchar(30)
select @FromDate = min(S0.Docdate) from dbo.OINM S0 where S0.Docdate >='[%0]'
select @ToDate = max(S1.Docdate) from dbo.OINM s1 where S1.Docdate <='[%1]'
--Rcpt from PRDN (Condition checked for Return component exclusion also)
SELECT T2.U_STKNO as 'PRN No', T2.PostDate as Date,
T2.DocNum AS 'WorkOrderNo',
b.DocNum as 'Issue Doc No',
ISNULL(d.DocNum,'') as 'Receipt Doc No',
b.U_IssPSCName as 'SubContractor Name',
T2.ItemCode as 'FG Item Code',
T3.ItemName as 'FG Item Name',
T2.PlannedQty as 'FG Planned Qty',
T2.U_OD as 'OD',
T2.U_ID as 'ID',
T2.U_OD/25.4 as 'Inches',
(T2.U_OD-T2.U_ID)/2 as 'Width',
0 as 'FG Pending Qty',
0 as 'FG Receipt Qty',
'' as 'Issue Item Code',
'' as 'Issue Item Name',
Sum(ISNULL(a.Quantity,0)) as 'Total Issue Quantity',
0 as 'Issue Item - Return Quantity',
'' as 'Return Doc No',
SUM(ISNULL(a.U_IssPTotWeight,0)) as 'Total Issue Weight',
SUM(ISNULL(c.U_Quantity,0)) as 'Total Receipt Weight'
from OWOR T2 inner join WOR1 T4 on T2.DocEntry = T4.DocEntry
INNER JOIN OITM T1 ON T1.ItemCode = T4.ItemCode inner join OITM T3 on T3.ItemCode = T2.ItemCode
LEFT join IGE1 a on T2.DocNum = a.BaseRef Inner JOIN OIGE b on a.DocEntry = b.DocEntry and T4.ItemCode not in (a.ItemCode)
LEFT JOIN IGN1 c ON c.BaseRef = T2.DocNum and T2.ItemCode = c.ItemCode INNER JOIN OIGN d on c.DocEntry = d.DocEntry
WHERE b.Series in('101','20') and T2.PostDate >= @FromDate and T2.PostDate <= @ToDate and b.U_IssPSCName = '[%2]'
GROUP BY T2.U_STKNO, T2.PostDate, T2.DocNum, b.DocNum, d.DocNum, b.U_IssPSCName,T2.ItemCode,T3.ItemName,T2.PlannedQty,T2.U_OD,T2.U_ID, T2.U_OD/25.4,(T2.U_OD-T2.U_ID)/2
UNION ALL
SELECT T2.U_STKNO as 'PRN No', T2.PostDate as Date,
T2.DocNum AS 'WorkOrderNo',
b.DocNum as 'Issue Doc No',
ISNULL(d.DocNum,'') as 'Receipt Doc No',
b.U_IssPSCName as 'SubContractor Name',
T2.ItemCode as 'Item Code',
T3.ItemName as 'Item Name',
T2.PlannedQty as 'Planned Qty',
T2.U_OD as 'OD',
T2.U_ID as 'ID',
T2.U_OD/25.4 as 'Inches',
(T2.U_OD-T2.U_ID)/2 as 'Width',
(Select (T2.PlannedQty - (Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum and a1.ItemCode in (b1.itemcode) where b1.DocNum = t2.DocNum))) as 'Pending Qty',
(Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum and a1.ItemCode in (b1.itemcode) where b1.DocNum = t2.DocNum) as 'Receipt Qty',
a.ItemCode as 'Issued Item Code',
a.Dscription as 'Issued Item Name',
Sum(ISNULL(a.Quantity,0)) as 'Total Issue Quantity',
(Select (Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum inner join WOR1 b2 on b1.DocEntry = b2.DocEntry where b1.DocNum = t2.DocNum and a1.ItemCode in (b2.itemcode))) as 'Issue Item - Return Quantity',
(ISNULL((Select (Select a2.DocNum from OIGN a2 where a2.DocEntry = a1.DocEntry) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum inner join WOR1 b2 on b1.DocEntry = b2.DocEntry where b1.DocNum = t2.DocNum and a1.ItemCode in (b2.itemcode)),'')) as 'Return Doc No',
SUM(ISNULL(a.U_IssPTotWeight,0)) as 'Total Issue Weight',
SUM(ISNULL(c.U_Quantity,0)) as 'Total Receipt Weight'
from OWOR T2 inner join WOR1 T4 on T2.DocEntry = T4.DocEntry
INNER JOIN OITM T1 ON T1.ItemCode = T4.ItemCode inner join OITM T3 on T3.ItemCode = T2.ItemCode
LEFT join IGE1 a on T2.DocNum = a.BaseRef Inner JOIN OIGE b on a.DocEntry = b.DocEntry and T4.ItemCode in (a.ItemCode)
LEFT JOIN IGN1 c ON c.BaseRef = T2.DocNum and T2.ItemCode = c.ItemCode LEFT JOIN OIGN d on c.DocEntry = d.DocEntry
WHERE b.Series in('101','20') and T2.PostDate >= @FromDate and T2.PostDate <= @ToDate and b.U_IssPSCName = '[%2]'
GROUP BY T2.U_STKNO, T2.PostDate, T2.DocNum, b.DocNum, d.DocNum, b.U_IssPSCName,T2.ItemCode,T3.ItemName,T2.PlannedQty,T2.U_OD,T2.U_ID,T2.U_OD/25.4,(T2.U_OD-T2.U_ID)/2,a.ItemCode,a.Dscription order by T2.DocNum desc

Hi,
Try this:
Declare @FromDate Datetime
Declare @ToDate Datetime
Declare @SCCode nvarchar(30)
select @FromDate = min(S0.Docdate) from dbo.OINM S0 where S0.Docdate >='[%0]'
select @ToDate = max(S1.Docdate) from dbo.OINM s1 where S1.Docdate <='[%1]'
--Rcpt from PRDN (Condition checked for Return component exclusion also)
SELECT T2.U_STKNO as 'PRN No', T2.PostDate as Date,
T2.DocNum AS 'WorkOrderNo',
b.DocNum as 'Issue Doc No',
ISNULL(d.DocNum,'') as 'Receipt Doc No',
b.U_IssPSCName as 'SubContractor Name',
T2.ItemCode as 'FG Item Code',T3.ItemName as 'FG Item Name',T2.PlannedQty as 'FG Planned Qty',T2.U_OD as 'OD',T2.U_ID as 'ID',T2.U_OD/25.4 as 'Inches',(T2.U_OD-T2.U_ID)/2 as 'Width',case when ((T2.U_OD-T2.U_ID)/2) <30 then ((T2.U_OD-T2.U_ID)/2) *0.3 end, 0 as 'FG Pending Qty',0 as 'FG Receipt Qty','' as 'Issue Item Code','' as 'Issue Item Name',Sum(ISNULL(a.Quantity,0)) as 'Total Issue Quantity',0 as 'Issue Item - Return Quantity','' as 'Return Doc No',SUM(ISNULL(a.U_IssPTotWeight,0)) as 'Total Issue Weight',SUM(ISNULL(c.U_Quantity,0)) as 'Total Receipt Weight'from OWOR T2 inner join WOR1 T4 on T2.DocEntry = T4.DocEntryINNER JOIN OITM T1 ON T1.ItemCode = T4.ItemCode inner join OITM T3 on T3.ItemCode = T2.ItemCodeLEFT join IGE1 a on T2.DocNum = a.BaseRef Inner JOIN OIGE b on a.DocEntry = b.DocEntry and T4.ItemCode not in (a.ItemCode)LEFT JOIN IGN1 c ON c.BaseRef = T2.DocNum and T2.ItemCode = c.ItemCode INNER JOIN OIGN d on c.DocEntry = d.DocEntryWHERE b.Series in('101','20') and T2.PostDate >= @FromDate and T2.PostDate <= @ToDate and b.U_IssPSCName = '[%2]'GROUP BY T2.U_STKNO, T2.PostDate, T2.DocNum, b.DocNum, d.DocNum, b.U_IssPSCName,T2.ItemCode,T3.ItemName,T2.PlannedQty,T2.U_OD,T2.U_ID, T2.U_OD/25.4,(T2.U_OD-T2.U_ID)/2UNION ALL SELECT T2.U_STKNO as 'PRN No', T2.PostDate as Date,T2.DocNum AS 'WorkOrderNo',
b.DocNum as 'Issue Doc No',
ISNULL(d.DocNum,'') as 'Receipt Doc No',
b.U_IssPSCName as 'SubContractor Name',
T2.ItemCode as 'Item Code',T3.ItemName as 'Item Name',T2.PlannedQty as 'Planned Qty',T2.U_OD as 'OD',T2.U_ID as 'ID',T2.U_OD/25.4 as 'Inches',(T2.U_OD-T2.U_ID)/2 as 'Width',case when ((T2.U_OD-T2.U_ID)/2) >=30 then ((T2.U_OD-T2.U_ID)/2) *0.37 end, (Select (T2.PlannedQty - (Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum and a1.ItemCode in (b1.itemcode) where b1.DocNum = t2.DocNum))) as 'Pending Qty',(Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum and a1.ItemCode in (b1.itemcode) where b1.DocNum = t2.DocNum) as 'Receipt Qty',
a.ItemCode as 'Issued Item Code',
a.Dscription as 'Issued Item Name',
Sum(ISNULL(a.Quantity,0)) as 'Total Issue Quantity',
(Select (Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum inner join WOR1 b2 on b1.DocEntry = b2.DocEntry
where b1.DocNum = t2.DocNum and a1.ItemCode in (b2.itemcode))) as 'Issue Item - Return Quantity',
(ISNULL((Select (Select a2.DocNum from OIGN a2 where a2.DocEntry = a1.DocEntry) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum inner join WOR1 b2 on b1.DocEntry = b2.DocEntry where b1.DocNum = t2.DocNum and a1.ItemCode in (b2.itemcode)),'')) as 'Return Doc No',
SUM(ISNULL(a.U_IssPTotWeight,0)) as 'Total Issue Weight',
SUM(ISNULL(c.U_Quantity,0)) as 'Total Receipt Weight'
from OWOR T2 inner join WOR1 T4 on T2.DocEntry = T4.DocEntry
INNER JOIN OITM T1 ON T1.ItemCode = T4.ItemCode inner join OITM T3 on T3.ItemCode = T2.ItemCode
LEFT join IGE1 a on T2.DocNum = a.BaseRef Inner JOIN OIGE b on a.DocEntry = b.DocEntry and T4.ItemCode in (a.ItemCode)
LEFT JOIN IGN1 c ON c.BaseRef = T2.DocNum and T2.ItemCode = c.ItemCode LEFT JOIN OIGN d on c.DocEntry = d.DocEntry
WHERE b.Series in('101','20') and T2.PostDate >= @FromDate and T2.PostDate <= @ToDate and b.U_IssPSCName = '[%2]'
GROUP BY T2.U_STKNO, T2.PostDate, T2.DocNum, b.DocNum, d.DocNum, b.U_IssPSCName,T2.ItemCode,T3.ItemName,
T2.PlannedQty,T2.U_OD,
T2.U_ID,T2.U_OD/25.4,(T2.U_OD-T2.U_ID)/2,a.ItemCode,a.Dscription
order by T2.DocNum desc
Thanks & Regards,
Nagarajan

I just synced my music to my iphone 5 and i have only one playlist but I need help

Hi,
i just synced my music to my iphone 5 and i have only one playlist but when i sync my music to my ipad i have other music on there that i don't want right now i just want my christmas playlist folder that i have playlists cause on my iphone 5 i just have one playlist which is christmas music playlist folder that has playlists in it which is what i only want on my ipad right now thanks

Hey,
Here is what I did:
1. Connected my iPad to the computer.
2. Opened iTunes.
3. Pressed Music Tab.
4. Pressed the Selected Playlists, Artists, Albums, and Genres
5. Then in the Playlist box below I only have the Christmas music folder checked and all the playlists in that folder checked.
6. Then I Synced my iPad
Here is a Picture of my iTunes of what I'm talking about and then also here is a picture of my iPhone 5 music that has only one playlist folder with playists in it

TS3276 I can have only one recipient at a time on e-mails I am sending.

I can have only one recipient at a time on e-mails I am sending.

Any ideas on how to fix it?

I have a mixer which i was using with my pc and now i bought a new macbook and it have only one jack for headphones and to use mixers i need jack for microphone too so what should i do

i have a mixer which i was using with my pc and now i bought a new macbook and it have only one jack for headphones and to use mixers i need jack for microphone too so what should i do

You need to get headset splitter adapter.
http://www.startech.com/Cables/Audio-Video/Audio-Cables/35mm-4-Position-to-2x-3- Position-35mm-Headset-Splitter-Adapter-Male-to-Female~MUYHSMFF

How i can have only one Apple ID for everything my computer and tab and iphone?

How I can have only one Apple ID for evrything, my computer Iphone

Thats how the majority of people use iCloud. All you need to do is sign into the same account on all of your devices.

Is it possible to have only one line per item in InfoView document list?

Similar Messages

Maybe you are looking for