Is it possible to highlight a row in ALVLIST

Hi,
Is it possible to highlight a row in an ALV List ...If so how to do it?
Kindly help.
Thanks.

hi ,
u can colour a perticular row...
like,
TABLES:     ekko.
TYPE-POOLS: slis.                                 "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
line_color(4) TYPE c,     "Used to store row color attributes
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
      wa_ekko TYPE t_ekko.
*ALV data declarations
DATA: fieldcatalog TYPE slis_t_fieldcat_alv WITH HEADER LINE,
      gd_tab_group TYPE slis_t_sp_group_alv,
      gd_layout    TYPE slis_layout_alv,
      gd_repid     LIKE sy-repid.
*Start-of-selection.
START-OF-SELECTION.
PERFORM data_retrieval.
PERFORM build_fieldcatalog.
PERFORM build_layout.
PERFORM display_alv_report.
*&      Form BUILD_FIELDCATALOG
      Build Fieldcatalog for ALV Report
FORM build_fieldcatalog.
fieldcatalog-fieldname   = 'EBELN'.
fieldcatalog-seltext_m   = 'Purchase Order'.
fieldcatalog-col_pos     = 0.
fieldcatalog-outputlen   = 10.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname   = 'EBELP'.
fieldcatalog-seltext_m   = 'PO Item'.
fieldcatalog-col_pos     = 1.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname   = 'STATU'.
fieldcatalog-seltext_m   = 'Status'.
fieldcatalog-col_pos     = 2.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname   = 'AEDAT'.
fieldcatalog-seltext_m   = 'Item change date'.
fieldcatalog-col_pos     = 3.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname   = 'MATNR'.
fieldcatalog-seltext_m   = 'Material Number'.
fieldcatalog-col_pos     = 4.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname   = 'MENGE'.
fieldcatalog-seltext_m   = 'PO quantity'.
fieldcatalog-col_pos     = 5.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname   = 'MEINS'.
fieldcatalog-seltext_m   = 'Order Unit'.
fieldcatalog-col_pos     = 6.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname   = 'NETPR'.
fieldcatalog-seltext_m   = 'Net Price'.
fieldcatalog-col_pos     = 7.
fieldcatalog-outputlen   = 15.
fieldcatalog-datatype     = 'CURR'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname   = 'PEINH'.
fieldcatalog-seltext_m   = 'Price Unit'.
fieldcatalog-col_pos     = 8.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
ENDFORM.                    " BUILD_FIELDCATALOG
*&      Form BUILD_LAYOUT
      Build layout for ALV grid report
FORM build_layout.
gd_layout-no_input          = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-info_fieldname =      'LINE_COLOR'.
ENDFORM.                    " BUILD_LAYOUT
*&      Form DISPLAY_ALV_REPORT
      Display report using ALV grid
FORM display_alv_report.
gd_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program = gd_repid
      is_layout          = gd_layout
      it_fieldcat        = fieldcatalog[]
      i_save             = 'X'
    TABLES
      t_outtab           = it_ekko
    EXCEPTIONS
      program_error      = 1
      OTHERS             = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " DISPLAY_ALV_REPORT
*&      Form DATA_RETRIEVAL
      Retrieve data form EKPO table and populate itab it_ekko
FORM data_retrieval.
DATA: ld_color(1) TYPE c.
SELECT ebeln ebelp statu aedat matnr menge meins netpr peinh
   UP TO 10 ROWS
    FROM ekpo
    INTO TABLE it_ekko.
*Populate field with color attributes
LOOP AT it_ekko INTO wa_ekko.
Populate color variable with colour properties
Char 1 = C (This is a color property)
Char 2 = 3 (Color codes: 1 - 7)
Char 3 = Intensified on/off ( 1 or 0 )
Char 4 = Inverse display on/off ( 1 or 0 )
          i.e. wa_ekko-line_color = 'C410'
    ld_color = ld_color + 1.
Only 7 colours so need to reset color value
    IF ld_color = 8.
      ld_color = 1.
    ENDIF.
    CONCATENATE 'C' ld_color '10' INTO wa_ekko-line_color.
wa_ekko-line_color = 'C410'.
    MODIFY it_ekko FROM wa_ekko.
ENDLOOP.
ENDFORM.                    " DATA_RETRIEVAL

Similar Messages

Possible to highlight a row in text area which in turn would fire an event?

I'm making a GUI of which the main portion consists of a large text area. The text area would list problems that our company is experiencing - each row would represent a problem. Each row would give a problem ID and a description of the problem. I want to make it so that when the user clicks on a row (a problem), another dialog box would open which would present possible solutions to the user regarding the problem at hand. How would I write code to highlight a row which in turn would fire an event opening up another box?
I thought about going about this another way - have a drop down (jcombobox) integrated into each row which the user can choose from but I'm not sure if you can insert a drop down into a text area (and neatly into a row at that!) so I think the former way may be preferable.
Thanks in advance.
Regards,
Paul

If a java application is required (as opposed to a web-based solution using HTML's linking capabilities) the best approach might be a JList implementation. It could go something like this...
import java.awt.*;
import javax.swing.*;
import javax.swing.event.*;
public class ListFrame extends JFrame
   public ListFrame()
      super("JList example frame");
      getContentPane().add(getListPanel(), BorderLayout.CENTER);
      setDefaultCloseOperation(EXIT_ON_CLOSE);
      pack();
      setVisible(true);
   private Component getListPanel()
      JPanel panel = new JPanel(new BorderLayout());
      final JList list = new JList(new Object[]
         "List option 1...",
         "List option 2...",
         "List option 3..."
      // This will make sure only one item can be checked at a time.
      list.setSelectionMode(ListSelectionModel.SINGLE_SELECTION);
      // Handle the selection here.
      list.addListSelectionListener(new ListSelectionListener()
         public void valueChanged(ListSelectionEvent e)
            // No need to go on if this was a deselection.
            if (e.getValueIsAdjusting() || list.isSelectionEmpty())
               return;
            // This is where you would have to convert the value that's selected into whatever
            // it is you want to display to the user. This example just puts the text of the
            // selected item into a messagebox.
            Object selectedItem = list.getSelectedValue();
            JOptionPane.showMessageDialog(ListFrame.this, selectedItem);
      list.setVisibleRowCount(5);
      // The scrollpane will control the scrolling of the list (so you can have as many options
      // as you want). Standard JScrollPane functionalities can be used to control various
      // visual aspects of the list.
      JScrollPane scroll = new JScrollPane(list);
      scroll.setVerticalScrollBarPolicy(JScrollPane.VERTICAL_SCROLLBAR_ALWAYS);
      panel.add(scroll, BorderLayout.CENTER);
      return panel;
   public static void main(String[] args)
      new ListFrame();
}I know this is quite after-the-fact, but I hope it helps (if you hadn't already solved the problem :) )

Highlighting different rows within a JTable

I have a JTable that has 20 rows. I also have a Jlist next to the JTable. When someone selects something within the Jlist I want to highlight certain rows depending on what was selected within that list. For instance if a user selects Item1 within the list I want to highlight the 3rd, 8th and 11th row within a JTable. The problem is the JTable API will let you highlight a number of rows but not allow you to specify single rows to highlight at one time. When I run my code to do this I get the last row highlighted. The reason is because the 3rd and 8th row do get highlighted but when I call the setRowSelectionInterval(i, i); where i is the row to highlight it has already passed and will end up highlighting the 11th row only. Is there any work around for this?

First, make sure you table supports multi-select. Turn it on in this case, otherwise you can't select multiple items.
To color different rows, you'll have to set a cell renderer and use it to color those rows. It's possible to collor each and every cell a different color, set fonts, images, etc..you just need a good cell renderer.

Highlight a row in classic report based on condition

HI all Gurus
Using Apex 4.1.1 oracle 11g linux oc4j
I want to highlight a row where #column_value#='Y' to grey keep others as normal report settings.
I have a simple sql query
SELECT PK_ID,
FIRST_NAME,
LAST_NAME,
INITIAL_REG_DATE,
MAIL_DATE,
BEGIN_DATE,
END_DATE,
END_DATE-BEGIN_DATE as "#days",
BEGIN_STATUS,
END_STATUS,
COMMENTS,
DELETE_FLAG,
case when DELETE_FLAG='Y' then 'GREY' else '#f0f0f0' end DELETE_FLAG ,
INITIAL_REG_DATE+(END_DATE-BEGIN_DATE) "New Reg end date"
FROM SOR_TRACKING_DEL
where pk2_id =:P216_Detail
order by mail_Date desc
I created a Dynamic action
which will fir on on load , BIND on this classic report
$("input[name=f29]").each(function(){
var lThis=$(this);
if(lThis.is("Y")){
lThis.parents("tr:eq(0)").children("td").css({"background-color":"GREY"});
} else {
lThis.parents("tr:eq(0)").children("td").css({"background-color":"#f0f0f0"});
But this is not changing color as expected..
Kindly help me !
Thanks

Scott and Tom
Thanks you guys for looking into this.
Pls ignore my improper explanation and my inexperience with jquery.
I read some blog and was trying to do same on classic report but all blogs I found so far referred either interactive report or tabular report none of them mentioned classic report.
I guess using array for classic report wont be a good idea to start with. :/
I am not sure if this is right syntax and logic to highlight the row
$(function(){
var DELETE_FLAG = $(this);
if DELETE_FLAG.is("Y"))
DELETE_FLAG.parents("tr").children("td").css({"background-color":"GREY"});
I also created app here
http://apex.oracle.com/pls/apex/f?p=35155
workspace sors
user tester/testing
application 35155
Thanks again.

Is it possible to switch the rows and columns?

Is it possible to switch the rows and columns of a table? The reason I ask is that it would be easier for me to input the data with the number at the top of a column and the fields going down. But it would be easier to read the data with the number on the left and the fields going to the right. Is it possible to switch a table in this way?

mahongue wrote:
Is it possible to switch the rows and columns of a table? The reason I ask is
that it would be easier for me to input the data with the number at the top
of a column and the fields going down. But it would be easier to read the
data with the number on the left and the fields going to the right. Is it
possible to switch a table in this way?
It sounds to me as though you wish to transpose a table so that the original is changed from rows to columns and from columns to rows, as in the following:
Table 1
    A   B   C
========
1   o   p   q
2   r   s   t
3   u   v   w
Table 2
    A   B   C
========
1   o   r   u
2   p   s   v
3   q   t   w
You are right - it would be nice to have a menu item to magically transpose a selected block of cells. But there isn't one. So...
One way to solve this is to use the index() and transpose() functions to accomplish row and column cell transposition. If you are going to use a 1:1 cell correspondence and change the header columns and rows also, you can use this:
   =INDEX(TRANSPOSE(Table # :: <range>),ROW(),COLUMN())
where Table # and <range> is substituted as in the following fashion:
   =INDEX(TRANSPOSE(Table 1 :: $A$1:$C$3),ROW(),COLUMN())
Create a second table. Copy the modified formula above with the appropriate substitutions, select the range you wish to have your transposition inserted into (must match the transposed cell dimensions of the original range), paste the forumula and voila! the cells will be transposed.
Cautions:
o The target table must match the swapped cell length and width dimension. For example, if the original data range is 6 columns wide by 4 rows deep, then the corresponding table or range to hold the transposition must be 4 columns wide by 6 rows deep.
o If your transposed data block is to be offset from the origin of the new table, then you will need to include a subtractive offset into your cell formula, since in the transpose() function the data in the master data range is referenced from its position with the master range, not its cell position in the table. Such an offset is necessary because this example formula uses the target row and column numbers to arrive at indexed positions.
For example, if the new data range is to be offset one column to the right and one row below from the target table's origin then you must subtract (-1) from the cell and from the column references in the formula:
  Example:
  =INDEX(TRANSPOSE(Table 3 :: $B$2:$D$4),ROW()-1,COLUMN()-1)
If someone has a better solution I'd be glad to hear of it.

XML DB: is it possible to get a row for each element in a container element?

I have an XML document containing a container element (collection). If I query, using an XPath expression, the contained elements I get a row for each container element with the contained element concatenated. Is it possible to get a row for each contained element?
I run this simple query:
select extract(xmltype('<colors><color>Red</color><color>Green</color></colors>')
, '/colors/color/text()').getstringval() from dual
And get this result:
EXTRACT(XMLTYPE('<COLORS><COLOR>RED</COLOR><COLOR>GREEN</COLOR></COLORS>'),'/COL
RedGreen
1 row selected.
What I would like to have is:
Red
Green
2 rows selected.
Wishful thinking or possible? Many thanks!

Sure. This is where our XMLSequence() function comes in. It allows you to treat the top-level nodes in a nodeset as if they were rows in a table when combined with the TABLE() operator. Here's an example.
First, to make the SQL look a little cleaner, I like to define a function like this:
create or replace function testdoc return xmltype as
begin
return xmltype('<colors><color>Red</color><color>Green</color></colors>');
end;.
To break out the nodeset of <color> elements as a table, we use the following query:
select value(list_of_color_elements).extract('*/text()').getStringVal() as color
from TABLE( XMLSequence( extract(testdoc(),'/colors/color'))) list_of_color_elements.
Or, using the new-in-9.2 extractValue() operator so we don't have to remember the text() part:
select extractValue( value(list_of_color_elements), '.') as color
from TABLE( XMLSequence( extract( testdoc() ,'/colors/color'))) list_of_color_elements.
Here the TABLE(XMLSequence(...)) combo produces a table of XMLType, with one XMLType object in each row of the table.
In general, if the XMLType instance were coming from an XMLType table xmltab the query would look like this:
select extractValue( value(colors), '.') as color
from xmltab x, /* Important that this table comes earlier in the FROM clause! */
TABLE( XMLSequence( extract( value(x),'/colors/color'))) colors.
And if the XMLType were instead in a column of XMLType named doc in a table xmltab, then we would have the syntax:
select extractValue( value(colors), '.') as color
from xmltab x, /* Important that this table comes earlier in the FROM clause! */
TABLE( XMLSequence( extract( x.doc ,'/colors/color'))) colorsOnce you get the hang of it, you'll see that the combination of TABLE(XMLSequence()) to "shred" XML nodes into rows, and XMLAgg() to aggregate fragments of XML across multiple rows back into a single document, is quite powerful.

How to highlight selected row in a region ? ? ?

Hi There!
I have two regions Region1 and Region2. Region2 data is populated when I select a row in Region1.
Now I have Region1 and Region2 data on the same page, but I cant exactly tell which row in Region1 corresponds the data in Region2.
I was thinking of highlighting the row which was selected in Region1. Went through couple of solutions, but wasnt able to implement it.
So was wondering if any one of you know a easy to understand and implement a solution for this problem.
Any help or suggestions is greatly Appreciated.
Thank you
Krishna

Hi krishna,
You can try this
http://roelhartman.blogspot.com/2009/06/highlight-row-in-interactive-report.html
and examples
http://apex.oracle.com/pls/otn/f?p=ROEL:CURROW:763487747488998
http://apex.oracle.com/pls/apex/f?p=34839:27:0
or try solutions from this thread
Highlighting currently selected row in a Report-Form page
hope this will help you
regards,
Chetan
Edited by: Chetan on 24 May, 2010 12:44 PM
Edited by: Chetan on 24 May, 2010 12:45 PM

How to highlight a row in tree table - jdev 11.1.2

Hello:
Given a key, I want to highlight (select/set currency) the corresponding row in a tree table. I thought the following code would highlight the row in the tree table that corresponds to the key, but nothing is highlighted in the tree table. ie---> treeTable.setSelectedRowKeys(selectedRowKeys); What am I doing wrong? Thanks much.
public String cb1_action() {
BindingContainer bindings = getBindings();
OperationBinding operationBinding = bindings.getOperationBinding("Next");
Object result = operationBinding.execute();
if (!operationBinding.getErrors().isEmpty()) {
return null;
DCBindingContainer bc = (DCBindingContainer) getBindings();
DCIteratorBinding iter = (DCIteratorBinding) bc.findIteratorBinding("DDF1Iterator");
RowKeySet selectedRowKeys = new RowKeySetImpl();
ArrayList list = new ArrayList();
Row r = iter.getCurrentRow();
Key k = r.getKey();
list.add(k);
selectedRowKeys.add(list);
treeTable.setSelectedRowKeys(selectedRowKeys);
AdfFacesContext adfc = AdfFacesContext.getCurrentInstance();
adfc.addPartialTarget(treeTable);
}

Hello:
Do you mean setting the selectedRowKeys in the setter method of the treeTable in the Request Scoped Managed Bean?
If that is what you mean, I tried that and there was no change in behavior. (Still does not highlight the correct row in the tree table upon execution of the next method for the bindings) Does anyone have any sample code they can provide that works?
Thanks for the help.

How To Highlight A Row

Hi.
I'm using Apex 4.2.0 against Oracle 11gR2 and using mod_plsql. I'm searching for a good way to highlight a row (both the text and the background) in a report (both Classical and Interactive) when clicking an edit icon in the row and to preserve the highlighting as a way to give users context as they look at other regions, say, a form on the same page.
I've seen solutions for this: everything from placing calls to a Javascript function within a custom report template to using css styles. Unfortunately, thus far, these all fall short in that they "work" for only certain Apex themes or when using certain browsers. If users look at my app in IE 9, they see the row highlighted. But in Firefox 14, it is not. Or if a developer changes the theme, the highlighting may or may not work.
Does anyone know of a method that just plain works for any Apex theme and for any modern browser (IE 9+, Firefox 15+, Chrome, etc.). I sure would appreciate pointers to working code.
Thank you.
Elie

My question was answered by a talented person named Neelesh Shah on the Apex LinkedIn Forum page. Here is the link to our exchanges:
http://www.linkedin.com/groupAnswers?viewQuestionAndAnswers=&discussionID=198216434&gid=82082&commentID=111109223&trk=view_disc&ut=1K9ux3Q2VTcBA1
Thanks very much, Neelesh.
Elie

Is it possible to duplicate a row in a table and the values entered by u

PDF LiveCycle Designer : Is it possible to duplicate a row in a table and the values entered by the user?

[Move to LiveCycle Designer]

Is it possible to highlight text in Apple Mail for incoming mails and outgoing mails?

Is it possible to highlight text in Apple Mail for incoming mails and outgoing mails?

If you mean that you wish to highlight messages from certain people or domain names, then if you select Preferences under 'Mail' (top left hand corner next to the Apple logo when you're in the mail application) and then select the right hand icon marked 'rules', then click on Add Rule and hopefully the rest is fairly self explanatory.
Best of luck

How to highlight a row in a standard report?

Friends,
Hope you can help.
I need to highlight a row in standard report dependent on some criteria.
Having searched the forum I have been trying to implement the example given here.
This is what I have done:
1) Create a new report using the following query
select decode(deptno, 10, 'class1', 20, 'class2', 30, 'class3') trclass , ename, job, sal, comm from emp
2) Created a new Report Row Template from scratch and added the details given in the example above.
3) Placed the CSS Style sheet code in the stylesheet box at the following location:
Shared Components>Cascading Style Sheets>Edit Cascading Style Sheet
3) Ran the page
4) Employee report is displayed but nothing is highlighted.
What have I done wrong?
Thanks in advance for any help given (which of course will be marked helpful\correct!)
Ian

>
>
3) Placed the CSS Style sheet code in the stylesheet box at the following location:
Shared Components>Cascading Style Sheets>Edit Cascading Style Sheet
>
What have I done wrong?The CSS needed to go in the page HTML Header.

Highlight Current Row

Apex 4.2
Theme 21
I am able to highlight current form fields using get focus and lose focus dynamic actions.
How do I highlight the current row of a tabular form or updateable report.
I have tried using DA with
JQuery Selector tr[headers="FEE"] (column in my report)
Execute Javascript
$x_RowHighlight(this.triggeringElement,'yellow');
Any help appreciated
Gus

Gus ,
you can look at my demo ... ( the one you aked for in my other discussion)
http://apex.oracle.com/pls/apex/f?p=53793
demo / demo
when i click on on row of the IR , the text of selected row is set to red .
i m sure that you can use it to highlight your row .
Just remember that when you set for example background-color of a cell, the style of the region may hide what you try to change. I m not sure why but if you disable the region class
your modifications will appears.

Highlight JTable Row with Right-Click

How can I get a JTable to highlight a row when that row is right-clicked? Thanks, Jeremy

table.addMouseListener(new MouseAdapter()
public void mouseClicked (MouseEvent e)
if(e.isMetaDown())
int row = table.rowAtPoint(e.getX((), e.getY();
table.setSelectionInterval(row, row);
});Or something like that.

Is it possible that a particular row of IWDTable set to non editable?

Hi All,
Is it possible that a particular row of IWDTable set to non editable on the basis of a field value ?? Plz help.

Context
+ Rows (node)
+ value (integer)
+ readOnly (boolean,calculated=true)
Bind the "readOnly" property of the InputField (cell editor) to the "readOnly" attribute shown above. Implement the calculated attribute getter like
boolean getRowsReadOnly(IRowsElement element)
return element.getValue() == 42; /* or whatever */
Armin

Is it possible to highlight a row in ALVLIST

Similar Messages

Maybe you are looking for