Is it possible to insert (or add) a blank page into the middle of an existing chapter of a book created with iBooks Author?

I have one LONG chapter in my book and feel is necessary to make some edits that include additional pages within the chapter itself.  But when I INSERT a page or press the +Page prompt as I have my chapter open to the place I wish to insert a page, the new page appears only at the END of the chapter and not at the point within the chapter that I would want the new blank page to appear.  What gives?  Another under developed software bug, or....?
Anyone else have the same issue and has been able to overcome it?

A new page is always dropped at the end. The only option I have found is simply to copy and paste everything down one - or as you want to adapt it.  I assume its not a text only book or the text would flow and add pages as required.
Its not a bug or under developed.... its  the Apple Way

Similar Messages

  • Is it true that Pages cannot insert a page into the middle of a document?

    Is it true that Pages cannot insert a page into the middle of a document?
    I have tried this many times using different techniques and it just refuses to do it. Can anyone help?

    To see how Pages works:
    Menu > View > Page Thumbnails
    When you click on the thumbnails each Section is outlined in yellow.
    Click where you want a new page > Menu > Insert > Section Break
    But then to have a new page all you need to do is add content to fill the page or Insert > Page Break to force the insertion point over onto a new page.
    Peter

  • The report engine add a blank page at the end of report

    I have configured a group with the option "New page after" checked. The problem of that seems the engine add a new blank page at final of report. Exists some way for avoid that? Perhaps is possible add a formula for don´t allow that when is in the last page?
    Regards and many thanks for the help.

    Many thanks. That works

  • Add a landscape page in the middle of portrait document?

    I need to have one page with  landscape orientation in the middle of a document that's otherwise got portrait orientation. I tried to add a disconnected page, and create a new master page, but I can't seem to get it to change the paper size for just that master page.  I went to Format>Page Layout>Page Size and set the new size, but I got an error message that says "The new page size is too small for some custome master page column layouts.." It seems to want to change the layout of all of the pages. What's the correct way to add this page?
    Thanks

    The text frame has to be oriented in a horizontal manner for text entry.
    If your table is wide, then create a rotated landscape master page. There's a tutorial on the Scriptorium Wiki for this at:
    http://wiki.scriptorium.com/tiki-index.php?page=Adding+the+LandscapeRight+master+page
    It's also described in the FM User Guide (or online help) in the section "Creating and editing custom master pages" as "Creating a rotated master page", the location in the Guide will vary depending upon your specific FM version.

  • Is there any way to insert a blank page in the middle of a document (rather than at the end)?

    I can do this in Word, but not Pages. I'm using Pages '09 Version 4.1. Any help would be appreciated.
    Thank-you!

    You can also click at the end of a section and insert a new section from the Sections link on the toolbar.
    Basic rule is if you are clicked in the text, then the new section will go after the current section.
    If you are not clicked in the text then the new section will be at the end of the document.
    A section obviously does not fit inside an existing section.
    Peter

  • Inserting blank page into template

    I am working in a template. I would like to insert a blank page into the middle of it and create my own thing and then continue with more pages from the template. How do I insert a blank page.

    micheley,
    I think the easiest and cleanest way is like this: click on View > Show Invisibles so that you can see all the hidden characters, then put your cursor in front of the last paragraph marker on the previous page. Click on Insert > Page Break. That will add a new, blank page inside your document.
    -Dennis

  • Is is possible to insert more time to a composition in the beginning?

    Of course I know how to add time to the comp then move everything over that amount of time. That makes sense. But I was wondering if it's possible to insert a said amount of time at the first frame pushing existing frames to the end of the inserted time. Could be a timesaver for me.

    Simply adjust the comp duration, then use scripts like rd Shifter to offset all your layers by a given amount. I'm sure if one searched through AEnhancers.com and sites linked from there one could also find a smartified version that combines al lthe steps.
    Mylenium

  • Can't add new page in the middle of document

    I am creating a manual and inserted page breaks at the end of each page as I created the document. Now I am trying to add a new page to the middle by inserting page breaks and even section breaks, but every time I try to add it in, it just goes to the bottom of the document and I am unable to move anything into the original 50 pages. Any tips here?
    When I look at the thumbnail view of the document it has all 50 pages in one yellow box instead of one page individually. A bit odd.

    The thumbnail browser shows one small page thumbnail for each page of your document. Each yellow bounding box indicates a section. So the thumbnail browser indicates your document has a single section with 50 pages in it.
    As you've typed your document it has naturally flowed from one page to the next. If you place a page break at the end of the page you are simply mandating what Pages has already voluntarily done. But if you insert a second page break you should get a new blank page. In other words, if you put your cursor at the bottom of page 6 and insert a page break you will move to the top of page 7 which has text because it is still page 7. Insert another page break and page 7 becomes page 8 and you'll have a blank page 7.
    Note: if you move your cursor into the middle of the document and insert a section break you'll see that the thumbnail browser shows two sections; one ending on the page above your cursor and one starting on the page your cursor is in. This is useful to understand.
    Second Note: if you use the Insert>Sections option it always inserts a new section at the bottom of the section your cursor occupies. Since your document currently has one section, that's why you wind up with the inserted page at the end of your document.

  • PageMaker 7 add a blank page

    Hi, when I create a pdf file from a pdf print(edoc printer) in pagemaker it always add a blank page a the end of the documenrt.
    I think the problem come from pagemaker because when i print a pdf with edoc printer on a .doc or html page the issue didn't appear.
    Do you know this issue ?
    What can i do to solve this isssue ?
    I use a PageMaker 7.0 on XP sp2 and edoc printer 6.42

    See if the pages in the FAQs help:
    John Davies, "8.11 - %deleteme printed on extra page" #1, 24 Dec 2003 4:44 am
    and
    Donald Gruener, "8.1 - Troubleshooting" #1, 15 May 2002 1:49 pm
    Iechyd da! John
    01:12 22/01/2009 GMT

  • How to add A single row at the middle of the table in a Webi report

    Hi,
         I created a Webi report using Universe(Created universe using bex query).Now i have a requirement to display a row at the middle of a report. Can you please tell me ,how to add a sigle row at the middle of a Webi report.
                                                    Thanks in advance
    Regards
    Monika

    Hi Monika,
    It is not really possible to add a row (I assume you mean of unrelated data) to the middle of a table in a report. You can add a new table with a single row between two tables. For instance you could add a new one row table, or even single cells which are positioned relatively between two tables. Possibly a block on top of another. But this gets tricky.
    Can you explain in more detail what you are trying to do?
    Thanks

  • Best way to add a new section in the middle of a tune?

    hi,
    what's best way to add a new section in the middle of a tune? I think I came up with an interesting transition to a tune... what's the best way to try it out?
    please be specific. if it's just select all and cut and move - I already know that one. somehow, I bet there's a better way.
    thanks in advance...

    You should be able to enter the "in" and out" points in the transport bar. And then under the Region menu, choose "Cut/Insert time."
    So if, for instance, you go up to bar 32, and want to add 8 bars, enter 32 1 1 1 in the top transport place, and 40 1 1 1 in the second. Then select "Cut/Insert Time", and an 8 bar whole will be added to your song.
    Be aware that if there are overlapping MIDI notes found at that cut point, Logic will warn you about it, and give you some options. In this case, I think "Keep" would be what you'd want, but every situation is different...
    Hope that helps....

  • How do I insert a page in the middle of a section in iBook. The insert always puts it at the end of the section.

    I am writing an iBook, and I need to insert a page in the middle of the section without disrupting the layouts on the following pages.  I keep trying to insert, but it always sticks a new page at the end of the section.  Is there any way to add a page, or move pages around in an iBook?

    Using the thumbnail view on the left, select the page you want a new one after, then right click and choose 'Insert Page'....that should do it.

  • Can I add a page in the middle of an iphoto book?

    I have created a photo book and would like to add a page of pictures in the middle of the book. Can I do this or can I only add pages at the end?

    The thumbnail browser shows one small page thumbnail for each page of your document. Each yellow bounding box indicates a section. So the thumbnail browser indicates your document has a single section with 50 pages in it.
    As you've typed your document it has naturally flowed from one page to the next. If you place a page break at the end of the page you are simply mandating what Pages has already voluntarily done. But if you insert a second page break you should get a new blank page. In other words, if you put your cursor at the bottom of page 6 and insert a page break you will move to the top of page 7 which has text because it is still page 7. Insert another page break and page 7 becomes page 8 and you'll have a blank page 7.
    Note: if you move your cursor into the middle of the document and insert a section break you'll see that the thumbnail browser shows two sections; one ending on the page above your cursor and one starting on the page your cursor is in. This is useful to understand.
    Second Note: if you use the Insert>Sections option it always inserts a new section at the bottom of the section your cursor occupies. Since your document currently has one section, that's why you wind up with the inserted page at the end of your document.

  • How to directly insert pictures inside a wiki page without the need to enter the picture's properties

    I am working on a publishing site collection using the enterprise wiki template. Add when I want to add a new Picture from my Pc to the wiki page, I will be prompted with the following dialog:-
    So can anyone advice how i can bypass this dialog and directly add the imag to the wiki page?
    i tried modifying the "Images" content type by hiding the above fields, but still i will be prompted to enter the following :-

    Hi,
    According to your post, my understanding is that you want to directly insert pictures inside a wiki page without the need to enter the picture's properties.
    Per my knowledge, you can use javascript to bypass Edit Properties Page while uploading pictures.
    Here are some similar articles for your reference:
    How to bypass Edit Properties
    Page while uploading documents in a document library
    How to bypass Edit Properties Page while uploading documents in a
    SharePoint and .NET: How to bypass Edit Properties Page or Skip EditForm.aspx Page while uploading documents in a document library
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • How to add a function field into the existing matrix report

    Hi,
    I have a matrix report , now i wanted to add one moe field into the matrix which is getting the value from a function , this function is a part of the ref cursor query(group) , i'm able to get the value from the function but it cannot display on the existing matrix report. i wanted to add this in the repeating frame which is printing down. how could i do this , looking for your help. thanks . bcj

    Here the scenario like,
    Data from Table_1
    NAME UNITS DAYS RATE
    AAA 10 1 1.2
    BBB 12 2 3.1
    AAA 20 2 4.1
    CCC 23 1 5.2
    Here, In the matrix report the NAME and UNITS are row fields and 'DAYS' is column field , RATE would be the cell field, and
    Data from Table_2 ,
    NAME BASIC
    AAA 2
    AAA 2
    BBB 2
    CCC 3
    In the report i have to display the 'BASIC' along with the NAME in row level ( repeating frame printing down),
    To get the multiple 'Basic' for each 'Name' using a ref cursor .
    and, using a function to do further calculation based on the basic value
    begin
    select basic into v_basic where name =:name;
    return(caluculated_value);
    end;
    and return the calculated value to the report. But at that time cannot accommodate the value in the matrix report with other groups frequency.
    looking for your valuable help. Thanks Bcj

Maybe you are looking for