The report engine add a blank page at the end of report

I have configured a group with the option "New page after" checked. The problem of that seems the engine add a new blank page at final of report. Exists some way for avoid that? Perhaps is possible add a formula for don´t allow that when is in the last page?
Regards and many thanks for the help.

Many thanks. That works

Similar Messages

Is it possible to insert (or add) a blank page into the middle of an existing chapter of a book created with iBooks Author?

I have one LONG chapter in my book and feel is necessary to make some edits that include additional pages within the chapter itself. But when I INSERT a page or press the +Page prompt as I have my chapter open to the place I wish to insert a page, the new page appears only at the END of the chapter and not at the point within the chapter that I would want the new blank page to appear. What gives? Another under developed software bug, or....?
Anyone else have the same issue and has been able to overcome it?

A new page is always dropped at the end. The only option I have found is simply to copy and paste everything down one - or as you want to adapt it. I assume its not a text only book or the text would flow and add pages as required.
Its not a bug or under developed.... its the Apple Way

PageMaker 7 add a blank page

Hi, when I create a pdf file from a pdf print(edoc printer) in pagemaker it always add a blank page a the end of the documenrt.
I think the problem come from pagemaker because when i print a pdf with edoc printer on a .doc or html page the issue didn't appear.
Do you know this issue ?
What can i do to solve this isssue ?
I use a PageMaker 7.0 on XP sp2 and edoc printer 6.42

See if the pages in the FAQs help:
John Davies, "8.11 - %deleteme printed on extra page" #1, 24 Dec 2003 4:44 am
and
Donald Gruener, "8.1 - Troubleshooting" #1, 15 May 2002 1:49 pm
Iechyd da! John
01:12 22/01/2009 GMT

Blank Page at the End

Dear All,
My requirement is to flow a table data onto subsequent pages without repeating the header portion of the form.
I created two master pages and two flowed subforms to do the same.
A default blank page with the heading is coming for 2 rows of data, or whenever the amount of data is less.
How should I solve this?
If is it to be done by scripting, please enclose the relevant code.
Thank you.
Regards,
Prosenjit.

The address field must not flow, yet the table should flow, how will that be possible, please explain.
Thank for your time.
I am trying to use the 'initialization' of subform 'Page2' as follows: xfa.form.data.Page2.presence = "hidden" within a IF-ENDIF construct, yet its not working out.
Regards,
Prosenjit.
Edited by: prosenjit chaudhuri on Aug 30, 2009 6:14 PM

How to avoid blank page in the report?

adding a field in the grouping and checking the page break option means then we are getting blank page as the first page of the report? How to avoid this blank page?

Usually blank pages appear as first page due to the presence of filler lines (//////) on top of report header.Please ensure that the top header is exactely started from top of page itself.

Blank page at the beginning of the report

I have a Report with a Group Above. I wanted a new page when a new Group began, so I selected the Group and changed Page Break Before to yes. It did start a new page with each Group, BUT there is now a blank page at the beginning of the report. How do I get rid of the blank page?
Thanks, Wayne

Hi Wayne,
I don't know whether the solution provided by Jrg works for you or not. But I solved the problem in a different way.
Insted using a page break on a repeating frame, I placed a boilerplate item in a corner just below the frame with a " "(white space) and I set the boilerplace item's property "Page Break After/Before" to "Yes". You understand me? just cheating ;)
That worked for me.
Cheers,
Gouri Sankar

How to avoid printing an additional blank page at the end of the report

I have a report which has 3 panels in the main section of the report, about 3 pages in size. 1st & 2nd panels are enclosed in a repeating frame, and 3rd panel in a different repeating frame.
The vertical panels per page in the property inspector of the main section of the report is kept as 2. And thus, when I am printing the report I am getting an additional blank page at the end. Also I tried to make the vertical panels per page to 1 in the property inspector for main section but the following error is being returned:
REP-0801: Layout canvas must remain large enough to fit all layout objects
Can anyone tell me how to handle this?

Hi,
I too faced similar prob.
But when i made the After Page Value property of the report as blank it removed the blank page for me .
Try this and let me know whether it has helped you.
Regards
Srinivas Pusa

Blank Page at the end of the report

Hi
In my report i did not have any pagebreak or section break.
But some times i am getting extra blank page at the bottom of the report .
How to avoid this ..
Thanks in Advance
Have a Nice day.

Hi,
It is very probable that you are have unncessary space somewhere before the end of your template.
Use Ctrl+Shift+* to show the end of line markers and remove the unnecessary spaces in your
template then run again the view report.
cheers
Jorge
p.s If your question was answered then please grant the points and close the thread

Blank Page at the end of report(html output)

Hi,
I have created a paper layout report using report 10g.
DESFORMAT for the report is html.
when i take a print out of the report from internet explorer its printing a blank page at the end.
I tried with BLANKPAGES=NO it didn't help me and even unchecked the Blank Pages property in Report Builder tool.
Please help me in resolving this issue.
Regards
Srinivas.

Many thanks. That works

Blank Page in the middle of report

We are having a problem withour invoice report. The problem is that a blank page will print with no data on it.
The page is not completely blank. It has only page header and page footer
There is not always a blank page. It occurs only when the detail sections and various
footer sections print just far enough down toward the bottom of the page.
Does anyone have any ideas?
Thanks
Kalai

I have 3 sub reports at the group footer and supressd subreport if it is blank.
Also I have supressd group footer if it is blank.
Like
GF(Section1)-----SubReport1
GF(Section2)-----SubReport2
GF(Section3)-----SubReport3
It looks like the GF is occuping space even all the subreport are supressed when it is blank .
When I removed the entire GF I am not getting any blank page.
Thanks
Kalai

When I open safari, I get a blank page and the beach ball.

When I open safari, I get a blank page and the beach ball. If I try to go to a website, it will load up to a certain point sometimes—the .com of www.facebook.com for instance—but other times, nothing at all.
I've fixed this once before by deleting some files in the library folder—extensions & preferences I believe—and choosing not to have plug-ins selected, then restarting the whole computer—rather than just safari. It will work fine for a day, or maybe 3 at the most, before I have to repeat the process all over again. I'm sure it's because I usually put plug-ins back on once I get it to work, because you can't really use the internet without using plug-ins. But I'm using Chrome right now, as I do when I'm too lazy or too in a rush to try the whole process of getting safari to work again, and I don't have a single issue with it.
My question is really, what plug-in could cause this to happen repeatedly? It's not like I'm going to websites that may have malware on them. I spend most of my day going to some of the most visited websites on the internet.
Is there a known bug out there, because Java has been overrunning concurrently with this happening. It's CPU % runs around 100. I quit the process, but it doesn't change anything. So, other than the fan turning on, I have not had any popup telling me that safari has crashed, that I'm not connected to the internet, or that something went horribly, horribly wrong. I'm pretty sure Safari things it's running fine, but it's not.
Thanks in advance.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

Implementing multiple page size requirement - extra blank page at the end

My XMLP report requirement is as follows.
- The report is printing a bunch of lines.
- Based on data and layout requirement, lines are grouped into page where they belong (due to complex logic for determining which page a line should go to...this is done in PL/SQL package that is called in the beginning of the RDF trigger)
- The first page needs to be printed on Legal size paper
- Subsequent pages (IF NEEDED) need to be printed on Letter size paper
So some report will have a 1-page output (legal size), and some will have multiple pages (1st page should be legal size, subsequent on letter size).
Here is a sample XML data:
<REPORT>
<LIST_G_PAGE_NUMBER>
<G_PAGE_NUMBER>
<PAGE_NUMBER>1</PAGE_NUMBER>
<LIST_G_LINE>
     <G_LINE>...</G_LINE>
     <G_LINE>...</G_LINE>
</LIST_G_LINE>
</G_PAGE_NUMBER>
<G_PAGE_NUMBER>
<PAGE_NUMBER>2</PAGE_NUMBER>
<LIST_G_LINE>
     <G_LINE>...</G_LINE>
     <G_LINE>...</G_LINE>
</LIST_G_LINE>
</G_PAGE_NUMBER>
<G_PAGE_NUMBER>
<PAGE_NUMBER>3</PAGE_NUMBER>
<LIST_G_LINE>
     <G_LINE>...</G_LINE>
     <G_LINE>...</G_LINE>
</LIST_G_LINE>
</G_PAGE_NUMBER>
</LIST_G_PAGE_NUMBER>
</REPORT>
For this, I created 2-pages RTF template and using the Word Page Setup feature:
1. First page setup is legal size (go to Page Setup, Paper tab, choose Letter and choose Apply to "Whole Document").
The first page has the following XMLP tag:
<?for-each: G_PAGE_NUMBER?>
<?if: PAGE_NUMBER=1?><?call:body?><?end if?>
<?end for-each?>
<?template:body?>
for-each loop that prints lines in a tabular format
<?end template?>
2. Second page setup is letter size (go to Page Setup, Paper, choose Letter and choose Apply to "This point forward").
<?for-each: G_PAGE_NUMBER?>
<?if: PAGE_NUMBER>1?><?call:body?><-- Ctrl-Break to insert a page break here --> <?end if?>
<?end for-each?>
It almost worked, except there is a blank page printed at the end. How do I remove the blank page? I have tried to use <?split-by-page-break:?> instead of the Ctrl-Break, but it did not seem to work (there is no page break happening at all).
I think the extra page is due to the multiple page nature of the RTF template. Is there a way to control the page size through XMLP tag (or XSL-FO). With that, I can try having a single page template and put the page size control within the XMLP / XSL-FO tag and hope that the extra blank page at the end will go away. Can someone please help?
Thank you!

Sorry for the typo in my previous post... I meant Ctrl-Enter (not Ctrl-Break).

-Why when I open same PDF in Photoshop in opens as blank page (all the graphic info disappears)??? -And why when I'm trying to measure a page in the "image size" (in order to send to client, for example) the graphic info disappears as well??

-Why when I open same PDF in Photoshop in opens as blank page (all the graphic info disappears)???
-And why when I'm trying to measure a page in the "image size" (in order to send to client, for example) the graphic info disappears as well??

Hi Mac Attack,
My computer will not disconnect from the internet. It seems to find a clone router and continues even when I shut down and unplug my my own home iy
Your main question was 'chopped' in the title. Please reply in the body of a reply box with the full question and anything you have tried. And no, the long report was not helpful .
If the same website is opening each time you launch a browser (Safari?) hold down the shift key as you launch to prevent previous pages from opening.
Have a look at your settings in Safari > Preferences. Especially General and Privacy.
Reset Safari to remove cookies and other stored data.
System Preferences > General
Have a look at your settings in System Preferences > Security & Privacy.
Call back with more questions.
Regards,
Ian

I click on a link, get a new blank page, not the info expected. Use AVG Free Ed, Windows 7 professional.

I click on a link, and get a new blank page, not the info expected. I use AVG Free Edition, Windows 7 Professional. I have tried "open link in new tab" - no joy. Not all links are affected. It is not possible to say when a link is going to fail or work - it seems random.
== This happened ==
Every time Firefox opened
== It just started to happen about 2 weeks ago

I get the address as it should be as in attachment when I hover over the "FLIXTER" add on the right of screen. When I click it just comes out in a new window but BLANK. Open in IE then shows me the correct view. Puzzling. I have tried disapbling ans enabling java script in my options and sometimes this works then sometimes not??

Disorganized forums (with bonus of how to add a blank page in acrobat)

Gee wiz these forums are disorganized.
Hey adobe, want to see how a forum should be organized? Then go to any of the bazillion websites that are set up on a hierarchy and EASILY searchable within a topic, instead of the convoluted mess that you have here.
Here is another answer to "how to a add a blank page" to a doc in acrobat.
Since it has already been "answered" (how absurd is that) I am posting it here, in hope that someone can find it because THIS solution is no where else on the web as far as i can tell.
Option click & drag a page to duplicate it then delete the page contents with the “touch up object” tool. then duplicate the page to your hearts content. note you will need to remove password if any first.
.

I've been usin acrobat since Version 4. Currently have last updated version 9.
Just recently made some pdfs. The last time I did a multipage PDF has been a while (but still after version 9).
But in order to see a full 8.5x11 page I had to do the dot trick I spoke of, there has to be some type of content even if same color as background, more than halfway down the page in order for it to show as a full page, you do nothing if it even creates one, shows as a half page or less.
And if you want it to look professional, you type either in middle or just bellow middle, the words:
THIS PAGE INTENTIONALLY LEFT BLANK
set color to a pale gray (as shown above). I've seen PDF Manual for software using this.

The report engine add a blank page at the end of report

Similar Messages

Maybe you are looking for