Is it possible to maintain a view vai Batch Input

Hi guys,
The user required to develop a BDC program to upload the data source from outside of SAP, and maintain these data into a view via Tcode: SM34. But it seems the view doesn't support Batch input.....
Can anybody tell me, is it possible to maintain a view via Batch input? Many thanks!
Brian Liu

Additional information:
This requirement is to upload the Overhead Rate data from outside of SAP, and maintained via KZM2 or SM34. But when I tried to record a BDC for KZM2, it seems that the SAP can not support batch input.
I find a SAP note 208474, it says:
Symptom
Overhead rates of the costing sheet of the overhead rates, which have been created, changed or deleted via batch input or Call Transaction, are not saved.
The same rates are saved if processing is carried out via Transaction KZZ2 or the Implementation Guide IMG.
Cause and prerequisites
Processing the Customizing transactions for maintaining the overhead rates of the costing sheet (Transaction KZZ2, KZM2) is
not supported in the batch input. This corresponds to the SAP standards according to which Customizing transactions in general need not necessarily be capable of batch input.
The batch input data of the overhead rates are not saved in the standard because processing is terminated by a COMMIT WORK. This statement ensures that the internal tables for the transport of the overhead rates are only deleted if their transfer to the database tables to be transported has been processed successfully.
Solution
The subsequent modification allows batch input processing of the overhead rates, by suppressing the COMMIT WORK statement. As a result of the modification, the tables in the transport request of the overhead rates may be incomplete in single cases.
In cases where the overhead rates have not been transferred completely to the target system after implementation of the modification, include the overhead rates again in a transport request, repeat the transport and, if necessary, subsequent processing.
Note that the attached modifications are not and will not be included in the R/3 standard system.
I modified the sap standard program L0COEF04 according to another SAP note 150041, but after the modification, I still couldn't record the BDC.
Anybody who have ever met the same situation, or can give me some suggestion? With many thanks!
Brian Liu

Similar Messages

Is it possible to maintain table data in a maintenance view

hi all,
is it possible to maintain data in a table by using maintenance view.

Hi,
if you maintain texts of your objects in different languages it's better to use a maint. view:
example
1) ZTAB01 - CU-Data
2) ZTAB01T - texts to CU-Data
3) ZTAB01_V - maint.-view of 1) and 2)
hope that helps

Is it possible to modify a view at run time?

Hi,
I am relatively new to using SQL Server, so sorry if this is impossible or very easy and I missed the solution.
I am working on an enterprise SQL Server 2008 R2. Because of the size of the company, we do not want to create new Views as they need to be maintained. With that said, I need to use Views and not tables because of DB traffic issues.
HERE IS MY QUESTION:
Is it possible to Alter a view at run time; in this specific instance I want to change a constraint in the WHERE clause to include one more value in an IN() constraint. Specifically I want the modified SQL to go from WHERE column IN('A', 'B', 'C')
to
WHERE column IN('A', 'B', 'C', 'L'). I do not want to permanently modify the View, I just want the View to change when it is run for this report. I need to do this in order to fix a dynamic report. I am sure that there is another way to
accomplish this; however, a solution of this manner would also have many other uses, so I am curious if this is possible.
Feel free to tell me that it can be done.
Thanks for your ideas!!

Right, I understand those fundamentals. We outsource a lot of out view creation and do not have permission to create views for Business reasons; these are beyond my control. However, I can see the source code to many Views. We have also
been told that we should not use tables in our queries. Therefore, I need to use existing Views. Specifically, I would like to add an additional value to an IN() constraint. This would change the constraint as showed below:
IN('A', 'B', 'C') ---> IN('A',
'B', 'C', 'L')
I am wondering if this change can be made when the view runs and only for this one report, with the change being made from the report. This would be very easy if the constraint was removing a value. Obviously I could change the constraint from
IN('A', 'B', 'C') to IN('A','B') very easily with out modifying the View. This would be done by writing a query against the view and in the WHERE clause adding the new IN('A', 'B') statement. However, I want to do the opposite and add a value...

Change Maintain Organization Views configurations in IMG

Hi,
We want to use the same organization view for all GRC components. Therefore I want to change the settings in the IMG Node u2018Governance, Risk and Complianceu2019 u2013 u2018Shared Master Data Settingsu2019 u2013 u2018Maintain Organization Viewsu2019 u2013 u2018Maintain Organization Views configurationsu2019. Currently the tabe is filled as follows:
002 / GRC-AC / Standard Hierarchy / Standard Hierarchy / Default view
002 / GRC-PC / Standard Hierarchy / Standard Hierarchy / Default view
003 / GRC-RM / Risk Hierarchy / Risk Hierarchy / Default view
I have recently created these entries myself since the original table was empty (I copied these settings from another environment). This results in all my RM risks currently connected to organizations from the standard hierarchy. However I cannot change them, since the Risk Hierarchy does not contain anything.
I would like to allign all three components and configure the table as follows:
002 / GRC-AC / Standard Hierarchy / Standard Hierarchy / Default view
002 / GRC-PC / Standard Hierarchy / Standard Hierarchy / Default view
002 / GRC-RM / Standard Hierarchy / Standard Hierarchy / Default view
However when I try to delete the row with '003' and create the italic one, GRC won´t allow me to save it, since I cannot change the default view for application component Risk Management.
Does anyone have a suggestion how to solve this problem?
Thanks a lot,
Joris

Hi Roberto,
To solve the problem, please follow the following steps (in the exact order):
- Go to IMG node "Activate Applicactions in Client"
- Disable the applications where you want to change the organization view
- Go to IMG node "Maintain Organization Views"
- Adjust the view as required (it is now possible to change the default view for the disabled components)
- Go back to the IMG Node "Activate Applications in Client"
- Enable the applications again
- Check the workflow post installation again (there were some problems at my instance, although I´m not sure whether that has been caused by these steps).
Please let me know if this solves the problem.
Joris van de Veerdonk

How is ist possible to maintain the time dependencies for Abap Privileges?

How is ist possible to maintain the time dependencies for Abap Privileges?
In our Installation of SAP IDM 7.0 SP2 Patch 4 the time dependencies of Abap Roles are imported in the IC by Initial loads Jobs. How can the see / change the dependencies in our IDM Workflow UI? Presently nothing jet is shown, no Attribute is predefined..
Can anybody give us a hint?
Thank you in advance !!

If you click VIEW/SHOW PLAYHEAD INFO, you will see the timecodes as you scrub. (Consumer timecodes, not pro timecodes).
This works if you imported your footage from a camcorder, either miniDV or AVCHD.
However, if you have imported an analog file, or saved a DV file to a QuickTime File, you may just see the file creation date in VIEW PLAYHEAD.
However, there is a trick to getting even these clips to display timecodes if you know the start time.
First pick a clip. Make a copy and drag it to your desktop, just so you don't lose anything.
Rename this copy in the following format clip-yyyy-mm-dd hh;mm;ss.current file extension.
For example, clip-2001-07-14 09;30;45.mov (note the space between the day and the hour)
This would be a .mov clip that starts with the first frame at July 14, 2001 at 9:30:45 AM
Then import the clip into iMovie. You now have timecodes at the playhead.

Is it possible to maintain versioning of portal contents edited/created ?

Have few doubts about weblogic portal 9.2
1]Is it possible to maintain versioning of portal contents edited/created?
2]Can portal presentation mechanism hide selected output fields?
3]How will Presentation service support storage of view state in a repository?

Mr.Raja
As far as my knowledge, it does NOT make sense to assign a material to more than one class type.
We can assign many classes to a single class type of a material.
For configurable material, create the material using material type : KMAT.
& then, activate the 'batch management" control in the material master, for that material.
Pls revert with feedback.
Hope, that helps you.
Rgds
Sumanth.Gururaj
Consultant/Systems Analyst - SAP SD/MM

Is it possible the query in view object is dynamic?

Is it possible the query in view object is dynamic?
Generally, make the column list dynamic.
I think this is related to whether view object can be assembled at runtime based on a dynamic cursor in a procedure?
I ask this because I would like to know how we can use OA framework to simulate crosstab workbook in Discoverer?
Anybody has some clues, please advise.
Thanks.

Hi Shay,
Let me tell you briefly... I am sending input as customerId,customerNumber,CustomerName to the web service, if the record is available i am getting the response and i am displaying those records on page as a table. Now when i click a row i need to populate another table with all sale orders of that customer. From webservice datacontrol i have only customer object, I dont have Sales Order Object. For this i need master detail relation. In this case how to proceed. Thats why i am thinking to create a vO and EO object for sales orders table and i want to create view link for this sales order and customers. As i don't have customer VO and EO object to create view link.

Is it possible to create relational view on Analytic Workspace in Oracle 9i Release1

Hi All,
We are in the initial stages of Oracle 9i OLAP prototype. Since the current version of BIBeans 2.5 does not work with Release 2 of Oracle 9i OLAP, we are planning to use Oracle 9i OLAP Release 1. So can you please answer the following questions.
1. Is it possible to create relational view on Analytic Workspace(like in Release 2) and populate the OLAP catalog, if so can you give me guidance to get the appropriate user guide. The OLAP DML guide in Release 1 talks about creating OLAP catalog metadata for Analytic Workspace using a metadata locator object.
2, Is it advisable to use Oralce 9i OLAP Release 1? Does the Analytic Workspace and the corresponding BIBeans work in Release 1?
Thank you,
Senthil

Analytic Workspaces (Express/multidimensional data objects and procedures written in
the OLAP DML) are new to Oracle9i OLAP Release 2, you cannot find them in Release 1.
BI Beans will soon (within a week) introduce a version on OTN that will work with Oracle9i OLAP Release 2.

Is it possible to maintain multiple payment formats with a single Program

Hi,
Is it possible to maintain multiple payment formats with in a single program.
For example let us assume that we have created 2 payments formats as 'XX-PAY1' & 'XX-PAY2'.
When i select the parameter as '1' then 'XX-PAY1' has to run else 'XX-PAY2'.
if its possible could you please tel us where to define the parameters in Setups.
Many thanks,
Zaheer S

nazzu wrote:
Hi,
Is it possible to maintain multiple payment formats with in a single program.
For example let us assume that we have created 2 payments formats as 'XX-PAY1' & 'XX-PAY2'.
When i select the parameter as '1' then 'XX-PAY1' has to run else 'XX-PAY2'.
if its possible could you please tel us where to define the parameters in Setups.
Many thanks,
Zaheer SSounds like an Apps question. Start here: https://forums.oracle.com/forums/category.jspa?categoryID=3

Is it possible to maintain multiple pymt frmts with in a single prgm 11i

Hi,
Is it possible to maintain multiple payment formats with in a single program in 11i
For example let us assume that we have created 2 payments formats as 'XX-PAY1' & 'XX-PAY2'.
When i select the parameter as '1' then 'XX-PAY1' has to run else 'XX-PAY2'.
if its possible could you please tel us where to define the parameters in Setups.
Many thanks,
Zaheer S

nazzu wrote:
Hi,
Is it possible to maintain multiple payment formats with in a single program.
For example let us assume that we have created 2 payments formats as 'XX-PAY1' & 'XX-PAY2'.
When i select the parameter as '1' then 'XX-PAY1' has to run else 'XX-PAY2'.
if its possible could you please tel us where to define the parameters in Setups.
Many thanks,
Zaheer SSounds like an Apps question. Start here: https://forums.oracle.com/forums/category.jspa?categoryID=3

Is it possible to create a view where table in the From clause changes name

is it possible to create a view from a from a table like this
create view my_view as select id, col1, col2, result from <<my_latest_cacahe_table>>;
the table in the from clause changes the name .
I have another table which indicates the the latest name of my cache tables. Always there are two records there. The latest one and previous one.
select * from cache_table_def
table_name cache_table_name refresh_date
my_table cache_table245 1/23/2012
my_table cache_table235 1/22/2012
create table cache_table_def (table_name varchar2(25), cache_table_name varchar2(25), refresh_date date);
insert into cache_table_def values( 'my_table','cache_table245','23-jan-2012');
insert into cache_table_def values ( 'my_table','cache_table546','22-jan-2012');
create table cache_table245 (id number, col1 varchar2(50), col2 varchar2(20), result number);
insert into cache_table245 values(1, 'test123', 'test345',12.12);
insert into cache_table245 values (2, 'test223', 'test245',112.12);
create table cache_table235 (id number, col1 varchar2(50), col2 varchar2(20), result number);
insert into cache_table235 values (1, 'test123', 'test345',92.12);
insert into cache_table235 values (2, 'test223', 'test245',222.12);
what I need to do is find the latest cache_table name for my_table and use that in my view defintion
When user select from the the view it always reurns the data from the latest cache_table
is it possible to do something like this in oracle 11g?
I have no control on the cache tables names. that is why I need to use the latest name from the table.
Any ideas really appreciated.

I've worked up an example that does what you ask. It uses the SCOTT schema EMP table. Make two copies of the EMP table, EMP1 and EMP2. I deleted dept 20 from emp1 and deleted dept 30 from emp2 so I could see that the result set really came from a different table.
-- create a context to hold an environment variable - this will be the table name we want the view to query from
create or replace context VIEW_CTX using SET_VIEW_FLAG;
-- create the procedure specified for the context
- we will pass in the name of the table to query from
create or replace procedure SET_VIEW_FLAG ( p_table_name in varchar2 default 'EMP')
as
begin
dbms_session.set_context( 'VIEW_CTX', 'TABLE_NAME', upper(p_table_name));
end;
-- these are the three queries - one for each table - none of them will return data until you set the context variable.
select * from emp where 'EMP' = sys_context( 'VIEW_CTX', 'TABLE_NAME' );
select * from emp1 where 'EMP1' = sys_context( 'VIEW_CTX', 'TABLE_NAME' );
select * from emp2 where 'EMP2' = sys_context( 'VIEW_CTX', 'TABLE_NAME' )
-- this is how you set the context variable depending on the table you want the view to query
exec set_view_flag( p_table_name => 'EMP' );
exec set_view_flag( p_table_name => 'EMP1' );
exec set_view_flag( p_table_name => 'EMP2');
-- this will show you the current value of the context variable
SELECT sys_context( 'VIEW_CTX', 'TABLE_NAME' ) FROM DUAL
-- this is the view definition - it does a UNION ALL of the three queries but only one will actually return data
CREATE VIEW THREE_TABLE_EMP_VIEW AS
select * from emp where 'EMP' = sys_context( 'VIEW_CTX', 'TABLE_NAME' )
union all
select * from emp1 where 'EMP1' = sys_context( 'VIEW_CTX', 'TABLE_NAME' )
union all
select * from emp2 where 'EMP2' = sys_context( 'VIEW_CTX', 'TABLE_NAME' )
-- first time - no data since context variable hasn't been set yet
SELECT * FROM THREE_TABLE_EMP_VIEW
-- get data from the EMP table
exec set_view_flag( p_table_name => 'EMP' );
SELECT * FROM THREE_TABLE_EMP_VIEW
-- get data from the EMP2 table
exec set_view_flag( p_table_name => 'EMP2');
SELECT * FROM THREE_TABLE_EMP_VIEW
For your use case you just have to call the context procedure whenever you want to switch tables. You can union all as many queries as you want and can even put WHERE clause conditions based on other filtering criteria if you want. I have used this approach with report views so that one view can be used to roll up report data different ways or for different regions, report periods (weekly, quarterly, etc). I usually use this in a stored procedure that returns a REF CURSOR to the client. The client requests a weekly report and provides a date, the procedure calculates the START/END date based on the one date provided and sets context variables that the view uses in the WHERE clause for filtering.
For reporting it works great!

Purpose of maintaining classification view in material master

Hi gurus
can anyone explain Purpose of maintaining classification view in material master with example
Regards
Vishal...

Hi
One of the reason we maintain classification is for batch management where characteristics like shelf life expiry date is being attached to a class & that class is maintained in material master so whenever transactions takes place it will read from the characteristics value.
the other purpose is with variant configruation, for a configurable material there will be more than one characteristics for ex: in a car it comes with A/C - non a/c, metallic - non metallic, normal steering - power steering all these are mainatained as characteristics & assigned to a class & we use that class in classification for materials.
there is many more advantages & ways of using classification in material master.
Regards
Rang

Is it possible to maintain two class type for a material

Dear All,
Is it possible to maintain two different class type for a material.
If a material assigned with the batch and the material is a part of variant configuration, then how to handle this scenario.
For Batch Management, class type will be 023, for Variant Configuration class type will be 200.
How to handle this scenario.
Please explain.
Regards,
Mullairaja
Edited by: MullaiRaja on Jan 5, 2011 5:19 AM

Mr.Raja
As far as my knowledge, it does NOT make sense to assign a material to more than one class type.
We can assign many classes to a single class type of a material.
For configurable material, create the material using material type : KMAT.
& then, activate the 'batch management" control in the material master, for that material.
Pls revert with feedback.
Hope, that helps you.
Rgds
Sumanth.Gururaj
Consultant/Systems Analyst - SAP SD/MM

Is it possible to create materialized view log file for force refresh

Is it possible to create materialized view log file for force refresh with join condition.
Say for example:
CREATE MATERIALIZED VIEW VU1
REFRESH FORCE
ON DEMAND
AS
SELECT e.employee_id, d.department_id from emp e and departments d
where e.department_id = d.department_id;
how can we create log file using 2 tables?
Also am copying M.View result to new table. Is it possible to have the same values into the new table once the m.view get refreshed?

You cannot create a record as a materialized view within the Application Designer.
But there is workaround.
Create the record as a table within the Application Designer. Don't build it.
Inside your database, create the materialized with same name and columns as the record created previously.
After that, you'll be able to work on that record as for all other within the Peoplesoft tools.
But keep in mind do never build that object, that'll drop your materialized view and create a table instead.
Same problem exists for partitioned tables, for function based-indexes and some other objects database vendor dependant. Same workaround is used.
Nicolas.

Problem with maintain table views SM30 Transaction

Hello All,
i have a problem with the table maintenance view SM30, it doesn't permit me to modify the rows in the table.
we have added a field into the table and when i tried to change the table view from menu: Utilities ==> table maintenance generator==> change the system propose me a message that the screen 0001 will be deleted and recreated...but the system has deleted the screen and doesn't recreate it...in somewehere on internet we find that we should use the transaction SE55 menu:
Environment==> modification ==> Maintenance screen ==> button Layout which open the tool Screen Painter and from that we have created our screen with 4 fields of our table...our result that the screen is created and i can see it from the SM30 transaction but i can't insert rows in the table...when i try to go to maintain table: menu: Utilities ==> Table maintenance generator to try if i can modify something the system give me a message: "set the compare flag dialog ZIV_DP_PLCHAR_LA"
the ZIV_DP_PLCHAR_LA is the name of my table...
can you give me some advices please how should i do to fix this problem to insert rows in table throughout the transaction
SM30 "maintain table views: initial screen"
if i want to delete the screen from the SE55 transaction to recreate it newly what should i do to take care about some options
to have a new screen?
thanks for all
Bilal

Hi
First delete the old table maintainence generator.
Now Recreate the screen and your table is good to go..
These error messages come when we add new fields and different version of the table maintainence generator in database.

Is it possible to maintain a view vai Batch Input

Similar Messages

Maybe you are looking for