Change Maintain Organization Views configurations in IMG

Hi,
We want to use the same organization view for all GRC components. Therefore I want to change the settings in the IMG Node u2018Governance, Risk and Complianceu2019 u2013 u2018Shared Master Data Settingsu2019 u2013 u2018Maintain Organization Viewsu2019 u2013 u2018Maintain Organization Views configurationsu2019. Currently the tabe is filled as follows:
002 / GRC-AC / Standard Hierarchy / Standard Hierarchy / Default view
002 / GRC-PC / Standard Hierarchy / Standard Hierarchy / Default view
003 / GRC-RM / Risk Hierarchy / Risk Hierarchy / Default view
I have recently created these entries myself since the original table was empty (I copied these settings from another environment). This results in all my RM risks currently connected to organizations from the standard hierarchy. However I cannot change them, since the Risk Hierarchy does not contain anything.
I would like to allign all three components and configure the table as follows:
002 / GRC-AC / Standard Hierarchy / Standard Hierarchy / Default view
002 / GRC-PC / Standard Hierarchy / Standard Hierarchy / Default view
002 / GRC-RM / Standard Hierarchy / Standard Hierarchy / Default view
However when I try to delete the row with '003' and create the italic one, GRC won´t allow me to save it, since I cannot change the default view for application component Risk Management.
Does anyone have a suggestion how to solve this problem?
Thanks a lot,
Joris

Hi Roberto,
To solve the problem, please follow the following steps (in the exact order):
- Go to IMG node "Activate Applicactions in Client"
- Disable the applications where you want to change the organization view
- Go to IMG node "Maintain Organization Views"
- Adjust the view as required (it is now possible to change the default view for the disabled components)
- Go back to the IMG Node "Activate Applications in Client"
- Enable the applications again
- Check the workflow post installation again (there were some problems at my instance, although I´m not sure whether that has been caused by these steps).
Please let me know if this solves the problem.
Joris van de Veerdonk

Similar Messages

Taking Back Up of View Configuration Changes

Hi experts,
One of our customers wants to discard the existing CRM development system and bring in a new one in that place.
They have a way to save the workbench (code) changes, but no way to save the customizing changes.
So, what they are saying is, the changes we made to view configurations will be lost.
Is there any way to save these changes?
What I think is, the view configuration changes are saved in the BSPC* tables. So we can take a backup of these tables, and restore them in the new system.
Is it possible?
As the quality system (to which the customizing changes are already transported) will remain, is it possible to use the transaction SCWB and import these requests from quality to the development system?
Thanks and regards,
Rohan.

Hi,
Check if you can use the report program BSP_DLC_TRANSPORT_CONFIG_TEXT. It can only create entries in a transport request for one component at a time. I'm sure you can create your own report based on it to fit your needs.
Regards,
Arun Prakash

Is it possible to maintain a view vai Batch Input

Hi guys,
The user required to develop a BDC program to upload the data source from outside of SAP, and maintain these data into a view via Tcode: SM34. But it seems the view doesn't support Batch input.....
Can anybody tell me, is it possible to maintain a view via Batch input? Many thanks!
Brian Liu

Additional information:
This requirement is to upload the Overhead Rate data from outside of SAP, and maintained via KZM2 or SM34. But when I tried to record a BDC for KZM2, it seems that the SAP can not support batch input.
I find a SAP note 208474, it says:
Symptom
Overhead rates of the costing sheet of the overhead rates, which have been created, changed or deleted via batch input or Call Transaction, are not saved.
The same rates are saved if processing is carried out via Transaction KZZ2 or the Implementation Guide IMG.
Cause and prerequisites
Processing the Customizing transactions for maintaining the overhead rates of the costing sheet (Transaction KZZ2, KZM2) is
not supported in the batch input. This corresponds to the SAP standards according to which Customizing transactions in general need not necessarily be capable of batch input.
The batch input data of the overhead rates are not saved in the standard because processing is terminated by a COMMIT WORK. This statement ensures that the internal tables for the transport of the overhead rates are only deleted if their transfer to the database tables to be transported has been processed successfully.
Solution
The subsequent modification allows batch input processing of the overhead rates, by suppressing the COMMIT WORK statement. As a result of the modification, the tables in the transport request of the overhead rates may be incomplete in single cases.
In cases where the overhead rates have not been transferred completely to the target system after implementation of the modification, include the overhead rates again in a transport request, repeat the transport and, if necessary, subsequent processing.
Note that the attached modifications are not and will not be included in the R/3 standard system.
I modified the sap standard program L0COEF04 according to another SAP note 150041, but after the modification, I still couldn't record the BDC.
Anybody who have ever met the same situation, or can give me some suggestion? With many thanks!
Brian Liu

Organization View for Succesion Planning-My Org. Units!

Hi,
We are in process of implementing Nakisa (Release: 301_701) with EHP4
for few components including Succession Planning.
We have completed Admin settings for Succession Planning. When we log
in to End User section for succession planning & go to My Work
Area>>Visualize>>My Org. Units- Initially it was giving error "Cannot
find the root of your orgchart. The orgchart box may have been deleted
or incorrectly specified, or no valid org structure can be found for
the selected effective date. Please change the root of the chart or
select another effective date".
After closer inspection & using debugging for RFC
HRMSS_GET_ORGSTRUCTURE_AS_XML, we got to know that there are few
Organization Views which are hard coded (somewhere) but were not
present in OADP configuration for MSS. These Org. views are (1)
TMC_O_S_CP_SUPO (2) TMC_O_S_CP_ORG (3) TMC_O_S_CP_POS. I tried to add
these Org. views with relevant configuration (not sure about it
correctness)in OADP configuration. Surprisingly, system has started
showing responsible Org. Unit for Talent specialist. But still it is
not showing all the Org. Units inside Responsible Org. Unit & also not
showing the positions inside it. I think I'm going wrong in assigning
Evaluation paths to these Object Selection rules because I do not know
the purpose of each of these Organization Views. I tried to find some
information in User guides & SDN but failed to got something relevant.
Please Help!
Prashant
+91-9975422262

Can you confirm that you have
Activated (in SAP) the business function HCM_TMC_CI_1 ?
Installed the Nakisa Add On?
Installed the Nakisa transport?
I don't recognise those view names. In the EhP4 system I'm looking at, these are the only TMC* views defined:
TMC_DI_REP_B     Direct Reporting Structure (Bottom Up)
TMC_DI_REP_T     Direct Reporting Structure (Top Down)
TMC_EE_DIR     Direct Reports
TMC_EE_ORG1     Employees from Organizational Units
TMC_EE_ORG2     Employees from Organizational Structure
TMC_EE_SRCH     Who's Who
TMC_FN_JF     Job Architecture (Top Down) Overview
TMC_FN_JF_C_S     Job Architecture (Top Down)
TMC_IN_REPTA_DT     Indir. Position Hierarchy (Top Down, 1 Level) with Data View
TMC_IN_REPTB_DT     Position: Successor (CP), Holder (P), SBS, Key, HAS_SUBP
TMC_IN_REP_B     Indirect Reporting Structure (Bottom Up)
TMC_IN_REP_B_DT     Indirect Reporting Structure (Bottom Up) with Data View
TMC_IN_REP_T     Indirect Reporting Structure (Top Down)
TMC_IN_REP_T_DT     Indirect Reporting Structure (Top Down) with Data View
TMC_MAN_DIR_REP     Direct Reporting Reporting Structure
TMC_O_SUCC_B     Successor of Org. Structure (Bottom Up)
TMC_O_SUCC_B_DT     Org. Structure Successor (Bottom Up) with Data View
TMC_O_SUCC_T     Successor of Org. Structure (Top Down)
TMC_O_SUCC_T_DT     Org. Structure Successor (Top Down) with Data View
TMC_S_C_JF_FN     Job Architecture (Bottom Up)

Changing the default view for Line Items in an Auction.

Hello All,
We have a version 5 client who is asking for us to change the default view for line items in an auction.
Currently, if you have an auction setup, and you go to the Line Items tab, the default view is the "Basic View". The client would like to change the Default from "basic view" to "price view".
Is there a way to change this default in the system? Can this be configured using query groups? Any information would be helpful.

Hi wood cloud,
This is not possible, bcz there is no VLV for that drop down and we cant set it to the price view.
Thanks,
Ankur Goyal

Purpose of maintaining classification view in material master

Hi gurus
can anyone explain Purpose of maintaining classification view in material master with example
Regards
Vishal...

Hi
One of the reason we maintain classification is for batch management where characteristics like shelf life expiry date is being attached to a class & that class is maintained in material master so whenever transactions takes place it will read from the characteristics value.
the other purpose is with variant configruation, for a configurable material there will be more than one characteristics for ex: in a car it comes with A/C - non a/c, metallic - non metallic, normal steering - power steering all these are mainatained as characteristics & assigned to a class & we use that class in classification for materials.
there is many more advantages & ways of using classification in material master.
Regards
Rang

Artist and Album Panes in Organizer View of Media Sourc

When I plug in my older Zen Nomad, I see three panes in the organizer view for the player's library (select the player in the Sources pane)?-- the larger track pane to the right, full height, and an artist and album pane in the middle, split vertically. When I plug in my new Zen Vision:M, I only see the single track listing pane when I select the player (or select the Music folder). The artist and album panes are missing. I can't find any way to make them visible. How do I do that?Thanks much,Paul?

Right now, I have have everything installed on my PC?(MediaSource, both plug-ins, and the NOMAD driver). Obviously both devices have their firmware installed. ;-)? Everything is working, except for the inability to browse the Vision:M as a "music library." I had previously updated the NOMAD's firmware to the latest?..0, and I haven't changed it for all this. The Vision:M was already running the latest PlaysForSure?.20.02 firmware when I received it, so I didn't touch that. For the uninstall/reinstall discussed above, I was only changing software on my PC. I'm using MediaSource Player/Organizer 5.0.38. The NOMAD plug-in is the Creative Zen and NOMAD Jukebox Plugin 5.00.22. The NOMAD driver is the Creative Zen and Jukebox Driver 2.0.00. The Vision:M plug-in is the Creative PlaysForSure Devices Plugin 5.00.36. I tried software both from the Vision:M CD (which installed that horrible web based organizer), and from the downloads section of Creative's support web site (which is what I have installed now). Looking at the compatibility notes for all the software, it doesn't look like I can go back to the older MediaSource 3.30.2 I was using with the NOMAD?and use any available?Vision:M plug-in with it, so I didn't try rolling MediaSource back. It seems from my testing that the PlaysForSure?plug-in/drivers for the Vision:M do not present the device to MediaSource as something that is a "music library" and therefore MediaSource does not browse it with the same interface as it does the NOMAD. As I mentioned, it's already become pretty silly to try and browse just the 20 albums I've loaded so far, when all I can do is navigate to the Music folder and see a list of all the individual tracks. I can't even find a way to browse a list of albums or artists -- all I can do is sort by those columns which has very limited usability. Any ideas or tips appreciated. I'm guessing most people use some other software for managing their Vision:M libraries. What do they use? I had gotten used to MediaSource with the NOMAD and was hoping I could still use it for both. Thanks,Paul?Message Edited by AgileLogic on 0--200706:50 AM

How to Maintain Organizational Position of an Employee in PA30

Hi SAP Gurus,
I want to maintain PA30 of an Employee but i don't know how to maintain Organizational Position of an Employee in PA30.
I have maintained values in IMG in Personnel Management-Personnel Administration-Organizational Data-Organizational Assignment-Organizational Plan-Define positions
But when iam trying to take values in PA30 maintained by me in define positions then (with the help of F4) it is not showing the values maintained by me.
Kindly help me for the above
Regards,
Amitabh

hi
1.step1: ppoc_old
2.Step2:it will ask for Name of the org unit to create
3.give name and press F8
then u can see the name of ur organization and underwhich create the depts
after that
press staff assignments
create the positions
do it first
regards
partha

Problem with maintain table views SM30 Transaction

Hello All,
i have a problem with the table maintenance view SM30, it doesn't permit me to modify the rows in the table.
we have added a field into the table and when i tried to change the table view from menu: Utilities ==> table maintenance generator==> change the system propose me a message that the screen 0001 will be deleted and recreated...but the system has deleted the screen and doesn't recreate it...in somewehere on internet we find that we should use the transaction SE55 menu:
Environment==> modification ==> Maintenance screen ==> button Layout which open the tool Screen Painter and from that we have created our screen with 4 fields of our table...our result that the screen is created and i can see it from the SM30 transaction but i can't insert rows in the table...when i try to go to maintain table: menu: Utilities ==> Table maintenance generator to try if i can modify something the system give me a message: "set the compare flag dialog ZIV_DP_PLCHAR_LA"
the ZIV_DP_PLCHAR_LA is the name of my table...
can you give me some advices please how should i do to fix this problem to insert rows in table throughout the transaction
SM30 "maintain table views: initial screen"
if i want to delete the screen from the SE55 transaction to recreate it newly what should i do to take care about some options
to have a new screen?
thanks for all
Bilal

Hi
First delete the old table maintainence generator.
Now Recreate the screen and your table is good to go..
These error messages come when we add new fields and different version of the table maintainence generator in database.

How To find Changes in Excise Group Configurations??

Dear All,
Can you please help me how to Find the Changes done at the Configuration level at Excise Groups(Log-General>>Tax on Goods Movement>>India>>Basic Settings>>Excise Groups)
I need to find the user involved in Changing the Field""Excise Invoice During Billing""(Due to this change some invoices have been created without Excise Invoice which has been rectified in later times)
Note: I already Checked in Change Logs--where system suggesting no Logs Found for the Selected Period
(I kept the Period from the Date SAP implemented at my client)
Pl Help or Is there any need to implement any OSS notes/Reports..
Phanikumar

Respected Sir,
Thank you for your valuable help to my requirement.
Just I tried the way you suggested and able find the Transport requests and changes(almost 24 requests and i followed as per your Guidance sir in finding the details).
Unfortunately i am not able to find the Root cause who is the User involved..
(because at my production server they have maintained the Option of
"Changes without automatic recording,No-transports allowed in SCC4)
Is there any other way to find this?
thank you sir again for your help.
Phanikumar

Organizer view has no spaces between the pictures. How do I see the arrows to see the elements of a version set

My organizer view does not look like the view in the tutorials. The photos are all lined up in a solid mass with no gray space in between. I can't see arrows to view elements of a version set, and the photos are difficult to pick out individually. I thought about just deleting all the photos and importing them again, but I can't because the program keeps saying they are already in the organizer. When I delete the album the photos are in, they are still in the organizer and still in a solid mass. I also can't seem to find any way to delete the sample photos. So I have two questions: how to delete photos from the program and how to fix the view. Thanks for any help you can provide.

Go to the View menu and select Details or Ctrl & D
It changes back to the classic grid display
To delete pictures from the catalog, select the picture(s) and then press the Delete key. You will then be asked if you want to also delete them from the hard drive. Make your own choice as required.
Brian

Don't see changes in Live View until after 30 second delay

Running Dreamweaver CS5.5 on Mac OS X 10.7.5
Running Locally using MAMP
Site is configured to run on a local PHP/MySQL server, and consists of a single index.php file with nothing more than an html header (I don't even have any PHP in there yet).
When I use Dreamweaver to make a change in my index.php file (such as changing the text in the header), I save it, and then go to Live View or Web Browser Preview. In both cases, it takes over 30 seconds before I see my changes in Live View or Browser Preview.
To get a better idea of my workflow:
     1) My indiex.php file header reads "This is a test"... and it's correct in both Live View and Browser Preview.
     2) I change the header to be "Hello World".
     3) Select "Save" from the File menu.
     4) Click the "Live View" button.
     5) Live view still reads "This is a test"
     6) Open Browser Preview, also still reads "This is a test"
     7) I spam the refresh button in both Live View and Web Preview, no change, still reads "This is a test".
     8) After about 30 seconds of hitting the refresh button, the change finally is visible in Live View and Web Preview, reading "Hello World".
Anyone seen anything similar? Any ideas why I'm getting such a long delay before seeing my changes? Any suggestions to fix it (besides restarting my mac?

Thanks for the input!
Restarting the computer was the obvious first thing to try, but had no effect.
I have over 2GB free memory and still experiencing the issue.
It does take a few seconds to load the Live View for the first time, but that's not my problem. My problem is that with Live View already loaded, it takes over 30 seconds after saving changes to the php file before I can see the changes in the Live View (I'm clicking the refresh button once a second, and on the thirty something time I'll finally see my changes).
With "Preview Using Temporary Files" turned off, I get the behavior I've been describing.
Turning "Preview Using Temporary Files" on does actually mitigate the issue for me, though, so thank you for that suggestion!
     - I can see changes in my Live View instantly after saving and clicking the refresh button.
     - I can see changes using Preview in Browser instantly too... but the browsers refresh button has no effect (which makes sense since the temporary file it's looking at hasn't changed).
     - I can actually get some work done now.
However, I still feel that I should be able see my changes in Live View immediately after saving and clicking the refresh button without using "Preview Using Temporary Files", and I'd like to be able to leave the page open in my browser and just click the browser's refresh button to see my recently saved changes instantly.
So Long Story Short:
     Using "Preview Using Temporary Files" has definitely helped!
     But I still have no way to see my changes immediately without using temporary files, so something still seems fishy.

Changing your organization name

Is it feasable, or even advisable, to change your organization name in DS 5.2? We've been testing with a server and are ready to go production. It would be nice if there were a way to change the org name instead of rebuilding the machine from scratch and importing the data again. If not, no big deal. Just thought I'd ask first.

And the answer is... (thanks to Eli Rios)
Want to change top level domain name from o=orgname.com to o=orgname
Changing the suffix does not require a rebuild. All it involves is creating a new suffix under the data tree, exporting your old suffix to ldif, changing all occurances of o=orgname.com to o=orgname, then reimporting the ldif into the new tree. There is nothing published on how to do this, so included the steps in more detail below:
1. Login to admin console & open the directory server instance console.
2. Go to Configuration tab, Right click on Data object and choose new suffix.
3. Enter o=orgname and click ok.
4. Go to the cmd line, under the <dsRoot>/slapd-<instance> directory.
5. Run the following cmd:
./db2ldif -U -n <suffix> -a `pwd`/orgname.export
where <suffix> is the database name of the orgname.org suffix (it should be "userRoot" though).
6. Edit orgname.export file and replace all instances of orgname.com with orgname Then save.
***NOTE*** Be careful when replacing these occurances. Some ACIs may refer to host names in your domain as hostname.orgname.com and you don't want to replace the orgname.com with orgname for these matches. Otherwise your host name will be missing the last part of it's domain name.
7. Go back to the console, under configuration tab, under data object.
8. Right click on o=orgname entry and choose Initialize.
9. Enter path to modified orgname.export file and click on ok.
That should get all entries into the new database. Change whatever applications were using old suffix to new suffix to ensure that all is fine. Once you've determined that all is fine you can go back to the console and delete the old o=orgname.com suffix (or keep it as backup, whatever).

Maintaining QM view to 80,000 materials

Hi qm gurus,
I just want to ask on how shall i maintain QM view to all 80,000 materials. Is there any easy way of doing these? After which i could make use of QA08 to activate all inspection types of different materials. But my problem is if i havent maintained the qm view to all materials; I cant mass change(QA08)..LSMW makes an error to me as it says select at least one view..but QM box is not displayed. wat is the problem of this??can anybody help me on this one.
Thanks'
Matildo, Edsel
QM Consultant

Hi,
Please try using transaction MM50 to extend views for a material.
Choose the maintainence status "Q" For quality management, enter plant & mateirals in multiple selection field & execute.
Regards,
Senthilkumar SD

How to change the default view of published iCal's URL

I am publishing an iCal for a nonprofit group and link to the calendar from the group's website. The default URL given (in the send publish email option) leads to the week view of the current week. I would prefer the link to take site visitors to the month view of the calendar. If I go to the month view and copy the URL for it, and use that for the link, I have to change the URL each month, because the URL that comes from the month view will only show the month it was at the time I copied the URL -- it will not change with the new month. Does anyone have any idea of how I can change the URL so that it leads to the month view of whatever the current month is?
I should note that I know how to change the default view in the my browser, but I would rather not have to explain how to do this to all the people viewing the calendar -- just wanting the correct month view to show up when they click the link, without having to change it each month.
I would be so grateful if anyone has some insight on this!
Thanks.

Carlo,
The fact that this question has been left unanswered for over 2 months seems a little negligent on the part of Apple Support.
This Forum is unfortunately not Apple Support. According to Apple:
What is Apple Discussions and how can it help me?  "Apple Discussions is a user-to-user support forum where experts and other Apple product users get together to discuss Apple products. You'll find a wealth of information about your favorite Apple hardware and software products that will help you get the most out of your purchase. You can participate in discussions about various products and topics, find solutions to help you resolve issues, ask questions, get tips and advice, and more.
If you have a technical question about an Apple product, be sure to check out Apple's support resources first by consulting the application Help menu on your computer and visiting our Support site to view articles and more on our product support pages."
In direct response to your questions, I would say that (as observed by the OP) anyone who subscribes to a published calendar can make a change to their desired view using the "Preferences" icon which is displayed underneath the mini-month calendars.
There is no way that I know of to directly or conveniently change the time-range. There may be workarounds, but I could not find a suitable solution for you.
I would recommend that you provide iCal Feedback, if you are interested in informing Apple of your desires.
;~)

Change Maintain Organization Views configurations in IMG

Similar Messages

Maybe you are looking for