Is it possible to merge 10 BI reports using one key?

BI reports are based on Opportunity Id, and each report contains 5 different Ids, hence 1 single report will be splitted in 5 different reports based on Opty Id it has. Now for the same Opty Ids it does have different reports as well, so for 1 Opty Id if there will be 10 different reports, then all those reports should be merged in a single PDF.
In the "PDF Document Merger" section, no such functionality is mentioned to split the report based on a Key and then merges them. The requirement is to merge the reports in a single PDF File only, based on the Opty Id. As Customer has explained , they have 5 different reports, and 2 Opty Ids. So their final expected outcome is 2 reports by Opty Id, whereas each report will contain 5 different reports one below the other in a PDF file and print them.
Please advice how to proceed.

i would set up a report, or more if you have more levels of reporting.
have it take the parameters you are splitting and then merging on.
from jdeveloper, write a webservice app that will:
a create a recordset of the parameters you want to pass to the reports.
loop through the recordset and run each report.
put the output file names into an array (or an inputsteam array).
feed that array into pdfDocMerger.
you can optionally renumber and password protect as well.
then you create a script that runs the java program

Similar Messages

Is it possible to create dynamic reports using iReports in netbeans ?

Hi
I want to know that is it possible to create dynamic reports using netbeans? Dynamic reports means based on user selection(for eg. say by selecting values from combo boxes) some query will be genatated and fetch the query result from data base and displayed results in iReports only my problem is i am working on Netbeans IDE and i have installed iReports as plugins in netbeans IDE. and i am not able to find any tutorial that show me how to work with iReports under netbeans IDE. and how to create dynamic reports in iReports. If u know any such tutorial then can you send me link plz...!
Thanks

What do you mean by "in Start Menu"? Do you mean Live tile? See https://msdn.microsoft.com/en-us/library/windows/apps/hh465403.aspx
https://msdn.microsoft.com/en-us/library/windows/apps/dn468032.aspx
Best Regards,
Please remember to mark the replies as answers if they help

I have a work iphone (4) and my personal iphone (5). Can I possibly get by with just using one phone or do I need both phones?

I have a work iphone (4) and my personal iphone (5). Can I possibly get by with just using one phone or do I need both phones?

Both.

Best Practice to use one Key on ACE for new CSR?

We generate multiple CSR on our ACE....but our previous network admin was only using
one key for all new CSR requests.
i.e.......we have samplekey.pem key on our ACE
we use samplekey.pem to generate CSR's for multiple certs..
is this best practice or should we be using new keys for each new CSR
also .is it ok to delete old CSR on the lb..since the limit is only 8?..thx

We generate multiple CSR on our ACE....but our previous network admin was only using
one key for all new CSR requests.
i.e.......we have samplekey.pem key on our ACE
we use samplekey.pem to generate CSR's for multiple certs..
is this best practice or should we be using new keys for each new CSR
also .is it ok to delete old CSR on the lb..since the limit is only 8?..thx

Creating a back up using One Key on a new laptop

Hi there, I am trying to set up a new Lenovo laptop. I am being prompted to make a back up by the Lenovo Solution Center. However, when I try to do that using One Key the option comes up to use the default drive which is the D drive. But then it says there is only 22.4 GB of space on the D drive and the estimated image size is 29.0. So it won't let me back up there.
I don't know what to do. Do I need to back this up to an external hard drive? Can the D drive be made bigger? What happens if I don't back up at all? I don't understand why the d drive wouldn't have capacity for the back up. Confused and would be grateful for any advice, thanks

There used to be the Create Recover Disks (DVD's) in Thinkvantage tools. Now whether you have that in on yours remains the question. If its Win8 then it may be different.
I would call the USA support which is posted on this website for country support. You'll get someone else. If your drive image is corrupted the info on there is not much use other than your data. There isn't a one touch that I am aware of. Trueimage is an excellent backup tool worth every penny.
T520 Model 4239 Intel(R) Core(TM) i7-2860QM CPU @ 2.50GHz
Intel Sandy Bridge & Nvidia NVS 4200M graphics Intel N 6300 Wi-Fi adapter
Windows 7 Home Prem - 64bit w/8GB DDR3

Need Help using One-Key to make a system back up to DVDs

I bought U330 in Sept and now that I have some of my own programs installed and running, I want to make a backup to D (I think?) and also make backups to DVDs so I could make backups.
I'm no novice, but I cannot figure out the instructions for this.
When I pick Backup, even at Max compression, it says I don't have enough space.   I don't have THAT much on D:---did I need to repartition this before I even started using this computer? Does this mean I can never use One-Key?
When I pick Create Recover Disc (to make DVD backups), what do I do next?
    The dropdown for "Select Source From" has only two options, I am guessing I have to pick "Select another image", but then I don't know what to pick for the Image path.    How do I pick the whole C drive ???   Or??
Please tell me exactly how to do this because I am finding LENOVO's instructions totally inadequate.
A couple times I got to the DVD burner--not sure how--but then it just wanted to burn the sample music files.    I'm feeling quite frustrated--this should not be this difficult!!

I thought you've got error of another type - that error is fixed by simple software update.
Regarding your case - it's always frightening in first time. Believe me - there's completely nothing to be afraid of.
Resizing C drive may result killing your DATA on it only in case of energy is down during the process. Process is taking about 15-20 minutes on slow programs and about 3-4 minutes on fast programs. That means that even having problems with electricity you'll be able to finish everything correctly running on battery.
I'd recommend using Acronis Disk director Suite, but it is not free. One of the best free progs for that are bootable Linux livecds PartedMagic and GParted. They're all intuitive understandable.
You will get your NOVO recovery feature lost after C resize, but you can enable it later, replacing that factory backup in hidden partition with your own backup - your NOVO button will restore your system with all your software and settings.
it will be good for you to start with some basic principles on partitions organization schemes - why, what for and how questions are briefly explained here. After reading this you'll be able to ask right questions to get right answers.
//help will save the world

S205 - Steps to create a bootable USB drive using One Key Recovery (OKR) for backup image.

Hi Guys,
I just got my new S205. I am wondering how to backup the Windows OS including all factory settings to a bootable USB drive using One Key Recovery (OKR) 7.0. Basically I am afriad one day, my harddrive is failed or if I want to replace harddrive, I can reimage the harddrive back to factory setting and its OS (win 7). Would you share with me on the steps to do so?
I opened the OKR software and click on "Create Recovery Disk" -> "Factory Default Setting Disk" and Next, I couldn't see my USB drive? any one knows why?
thanks in advance.
New S205 owner.

I was able to do this, but it required reconfiguration of the HDD in my S205 (320 GB hard drive).
I used the built-in Windows Disk Management tool to shrink the size of my C: drive to 56,320 MB. [To accomplish this, I had to disable hibernation, and disable the swap file on the C: drive; and then re-enabled both after the process was complete.] 56,320 MB is more than enough space for the OS and all of the programs that I have installed (including the Professional version of Microsoft Office).
I then increased the size of the D: drive to 233,614 MB.
You can use different drive sizes, of course, but the D: drive must be of adequate size for the backup image.
Once the HDD is reconfigured, you can use One Key Recovery to backup your C: drive to your D: drive. From there, it can be copied to a USB (or copied across the network, etc. ... I've done both). Yes, it is 2 steps, but it's really easy.

Difficulty in using one key rescue

whenever i use one key rescue....it shows windows loading files ang lead me to to a cmd box "x:\windows\system32>" and i dont knoe what to do from here..can anyone come up withs ome help please????

Hi Navneet
Thank you for your post .
To help you further please help sharing few more details .
1. How you are trying to run OKR
2. Have you made any changes to the partition table
3. The system you purchased was with pre installed operating system
Cheers!!!

COPA reporting using costing keys

Hi,
I am using costing keys to access the different cost estimates in COPA. I have done the necessary configuration - created valuation strategy and assigned a point of valuation and assigned two costying keys - one for current and one for future costs. I have also mapped my value fields to each cost component. I mapped the one value field twice (representing each costing key) to each cost component.
My question is, when it comes to reporting, how do I show the values seperately that correspond to each costing key? Since I have the same value field being valued with current and future cost estimates, how are these shown separately in the COPA report? Or do I have to use two different value fields per cost component?
Much Appreciated

Just read the SAP documentation which says that you need to enter different value fields for the different costing keys (up to six).
Thanks to those who attempted.

DMEE tree:it's possible to generate more files using one DMEE format tree?

Hello Expert,
I have a question and i need you help.
It's possible to generate two files with one DMEE format tree? If yes, how can i do it?
Thank you in advance.
Amal

In DMEE we define the structure ie the kind of feilds that needs to be populated.As far as my knowledge I think one DMEE tree can be used to create one file FORMAT
Thanks,
K.Kiran.

How to use one key recovery-help!

this is a follow to my querry last time since the machine that i have doesnt have the original OS installed contrary to what is indicated in its COA.
i went to disk management and found these 5 drives:
non-letter drive Healthy (OEM Partition) 14.75 GB
C: (system, boot,..., primary partition) 97.56 GB
E: (Primary Partition) 324.35 GB
LENOVO (D): Logical Drive
unallocated drive of 101 MB
what is a logical drive by the way?
does it mean that i still have the Original OS? how will i use the One Key Recovery?
Thanks in Advance...God Bless!

Is there a OneKey Rescue System button on your PC? Did you create backup disks?

Flex 14 Ideapad Windows 8.1 not able to start or recover using One Key Recovery

I have a Flex 14 Ideapad with Windows 8.1. This was bought in Dec-2013. In the last 6 / 7 months I have has Windows crashing many times. The crashes used to end with a message boot media not found. Each time I used the One Key Recovery to restore the machine to factory setting.
Recently, I faced an issue around user id files not being able to be loaded at the initial startup. This time also I used the One Key Recovery to restore the system. After this I have has another windows crash and now the One Key Recovery also is not working.
What can be done now to make the system work again?

When you start up the system with the NOVO-Button, there should be an option for BIOS.
Do you see the hard drive in the BIOS?
Another option is this:
You can use an USB-Flash Drive to start the system.
For example you can give Ubuntu a try, a good tutorial to do that can be found here:
http://www.ubuntu.com/download/desktop/create-a-usb-stick-on-windows
If this system start up without any problems, we can use it to test your system.

Is it possible for two people to use one iMac with iPhone and iPad separate iTunes and iCloud acc?

Apologies if this is a very obvious question. I have one iMac that my husband and I use, he has an iPhone that he syncs with the iMac via iTunes for app such as docs to go. I recently purchased an iPad, I want to also sync with the iMac. Is it possible to use two iTunes and two iCloud acc to one iMac? We would like to pick and choose what we sync as we keep separate docs etc on the iMac, can this be done?

Yes. Just set up your own account in System Preferences > Accounts (User &groups in Mountain Lion). You'll have your own seperate everything including mail.

How to merge two crystal reports into one in Delphi using TCrpe?

I am absolutely new to Delphi and Crystal Reports. I figured that I can export a crystal report to pdf like this:
    crpe.Clear;
    crpe.ReportName := 'BasicInfo.rpt';
    crpe.ParamFields[0].CurrentValue := '0';
    crpe.Output := toExport;
    crpe.ExportOptions.Destination := toApplication;
    crpe.ExportOptions.FileName:='C:\CoverSheet.pdf';
    crpe.ExportOptions.FileType:=AdobeAcrobatPDF;
    crpe.Export;
(Although this is working, please let me know if I am doing it wrong )
My main problem here is: I have two .rpts "BasicInfo.rpt" and "Details.rpt" and I need to create one pdf out of them in Delphi.
Is there any way to merge two .rpts and export it into one pdf in Delphi?

You cannot merge two reports into one PDF - not in any CR SDK. There are 3rd party utilities that will let you do this, but no APIs for this in CR.
BTW.; What version of CR are you using?
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Merging 2 reports

I need to combine 2 reports into 1. Is there an easy way to merge all of the columns, along with the formulas, summaries and queries, into an existing report?

Martha
It is not possible to merge two reports definition. It is als that "merge" here is to vag, It could mean two reports one after other or make liknks of two queries in the data model and create a resulant report etc. You can use srw run report to call two reports from a dummy report and sumbitting a single request for the masetr dummy report
Thanks
The Oracle Reports team

Is it possible to merge 10 BI reports using one key?

Similar Messages

Maybe you are looking for