Is it possible to not respond to a request based on user input
I have client side validation in place that 100% guarantees that so long as the user uses the page appropriately, a request will not be sent unless it is valid.
On the server side i am validating the parameters passed in. If the validation fails I would like to send no HTTP response to the user, as I can assume the request is "hostile".
Is it possible to do this? Thanks for your help
hi :-)
if there is a request ;-) there is a response :-)
if you will not response to user's request what will be the output for the user?
i think you can do that but you can prefer a better response for an 'hostile' request, like sending a user to a custom page that send a warning that might lead to ip blocking or displaying an info that net activities are monitored or logged ;-)
regards,
Similar Messages
-
Hi All,
I am seeing the following error for SMS_AWEBSVC_CONTROL_MANAGER component with Message ID: 8100
Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests. The http status code and text is 400, Bad Request.
awebsctl.log file has below errors:
Call to HttpSendRequestSync failed for port 80 with status code 400, text: Bad Request
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
AWEBSVCs http check returned hr=0, bFailed=1
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
AWEBSVC's previous status was 1 (0 = Online, 1 = Failed, 4 = Undefined)
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
Health check request failed, status code is 400, 'Bad Request'.
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
Management point and Application Catalog Website Point are installed on the same Server where I am seeing the error for Application Catalog Web Service Point role. Management Point and Application Catalog Website Point are functioning properly. Application
Catalog Website is working.
Thanks & Regards, KedarHi Jason,
Application Catalog Web Service Point and Application Catalog Website Point; both are installed as per below configuration on same Server:
IIS Website: Default Web Site
Port Number: 80
with default value for Web Application Name configured.
For SMS_AWEBSVC_CONTROL_MANAGER component, I am getting below error in Component Status:
Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests. The http status code and text is 400, Bad Request.
Possible cause: Internet Information Services (IIS) isn't configured to listen on the ports over which AWEBSVC is configured to communicate.
Solution: Verify that the designated Web Site is configured to use the same ports which AWEBSVC is configured to use.
Possible cause: The designated Web Site is disabled in IIS.
Solution: Verify that the designated Web Site is enabled, and functioning properly.
For more information, refer to Microsoft Knowledge Base.
And awebsctl.log has the below error lines:
Call to HttpSendRequestSync failed for port 80 with status code 400, text: Bad Request
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
AWEBSVCs http check returned hr=0, bFailed=1
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
AWEBSVC's previous status was 1 (0 = Online, 1 = Failed, 4 = Undefined)
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
Health check request failed, status code is 400, 'Bad Request'.
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
STATMSG: ID=8100
What should I check from IIS side?
Application Catalog Website is functioning properly.
Thanks & regards,
Kedar
Thanks & Regards, Kedar -
Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests
Hi,
We are using SCCM 2012 sp1 cu5 with one primary in the datacenter and a number of local DP's which are presently servicing 200 users, but will rise to 12,000. The Application Catalogue is installed on the primary server.
Once a day we get the above error and the message id is 8101, and sometimes a user will have to click on install twice, with the first one failing (the ones that fail are normally with dependencies which are quite large in size around 250MB)
I'm just wondering if this is something I should be concerned about, especially since we will be ramping up user numbers in the next few weeks, and if it could be down to volume of traffic, although the apps are downloaded to the users local DP.
Also, does this design look suitable to service this amount of users, or should I have local application catalogues? The WAN bandwith between the datacenter and the user sites has recently been upgraded and is pretty fast.
Thanks
JazHi Torsten,
Message ID is in the SMS_AWEBSVC_CONTROL_MANAGER status log and equates to "Application Web Service Manager detected AWEBSVC is not responding to HTTP requests. The http error is 12002.
Then, about 1 hr later in the same monitoring log I get Message ID 8102 "Application Web Service Control Manger detected AWEBSVC is responding to HTTP requests.
At the moment it isn't doing this very often, just once a day at different times normally, but it has also logged this a couple of times as well. I guess it may correspond to multiple users accessing the web portal at multiple times, but wondered if
anyone else has seen this behaviour and how it was fixed.
Thanks
Jaz -
HP Photosmart 5514 e-All-in-One Printer - B111h not responding to print requests on Windows 8
Hello there,
Recently, I've been having these problems where the Printer is not responding for my requests to print on my HP Windows 8 Laptop for a PDF File. I had a message where it said that "Printer is in error state" but didn't get that message after I tried printing again. Now my printer is not responding to any print requests though the touch screen still works and is saying that the wireless is still working. If anyone could help me that would be great!
Thank you for your time.I see that you are having a problem printing from Windows 8.
See if you can print a self-test page or Printer status report from the printer itself. This will test the hardware functionality for the printer. If it does print, then it's a connection issue. If it does not print out, then we will need to try to deal with the hardware problems of the printer.
Run the print and scan doctor and check the results.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03275041
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it. -
I hired a commercial artist to create a color image for the cover of a self published book. I want a black and white image for the inside. The commercial artist has not responded to this request. How do I determine the format of the color image, I'm guessing it's Illustrator's formatting but I don't know. How can I find out if Illustrator will open the file and allow alterations? The image opens only in Apple's Pages software?
rons,
It seems that all you have is a raster image, presumable PNG24 or JPEG, in RGB.
It may have been created as raster artwork in Photoshop, or it may have been created as vector artwork with the help of Illy, or as a mixture of vector and raster artwork in either application, or both combined.
If you just need to have a raster representation in black and white based on the current colour image, you may try this, in a new RGB document (View>Smart Guides are your friends):
1) File>Place the image (you may tick Link or untick and have it embedded);
2) Create a rectangle with black fill (R = G = B = 0), at least as large as the image, and place it behind the image (you may ClickDrag with the Rectangle Tool between opposite corners, then Ctrl/Cmd+X+B);
3) Select all and in the Transparnecy palette flyout click Make Opacity Mask with both Clip and Invert Mask ticked. -
WLS 10.3 Does not respond to GET requests (HTTP/1.0)
Hi All,
I have 2 WLS servers running on separate physical hosts behind a cisco CSS load balancer. The keep-alive method the Cisco CSS uses is HTTP GET messages. This keep-alive method does not appear to work, because my WLS servers are not responding to the GET requests with HTTP 200 OKs (as would be expected). These GET messaged appear in the access logs, as follows, but from traces taken on the host, there are no HTTP 200 messages ever transmitted. I see no exceptions or errors related to this in the server or access logs.
WLS access log:
192.168.1.1 - - [14/Dec/2011:18:23:35 +0000] "HEAD /APPDIR/index.jsp HTTP/1.0" 200 0
192.168.1.1 - - [14/Dec/2011:18:23:45 +0000] "HEAD /APPDIR/index.jsp HTTP/1.0" 200 0
192.168.1.1 - - [14/Dec/2011:18:23:55 +0000] "HEAD /APPDIR/index.jsp HTTP/1.0" 200 0
Interestingly, If i use a http-ping tool to send HEAD messages, the server correctly responds with the 200. A major difference between the CSS and the ping-tool, is that the CSS is using HTTP/1.0 where the ping tool uses HTTP/1.1. The GET requests are formatted a bit differently too. Below is how the different GET messages are formatted. Is it possible that WLS 11g does not support HTTP/1.0? Is there any method of debugging that I can employ to troubleshoot this further? As mentioned I do not see any errors or exceptions in the server logs or access logs....
Many thanks, in advance.
HTTP-PING TOOL HEAD MESSAGE - weblogic responds to this message
HEAD /APPDIR/index.jsp HTTP/1.1
Host: myhost.domain.com:7005
Accept: */*
LOAD BALANCER HEAD MESSAGE -weblogic does not respond to this message
HEAD /APPDIR/index.jsp HTTP/1.0
Connection: Keep-Alive
User-Agent: Mozilla/4.06 [en] (WinNT; I)
Accept: image/gif, image/x-bitmap, image/jpeg, image/pjpeg, image/png, */*
Accept-Language: en
Accept-Charset: iso-8859-1,*,utf-8
Host: 192.168.1.66Other than failing the base address test, does the device seem to work in the test panels? One quick test would be to open the digital I/O panel, change some of the lines to output, toggle the logic levels, and see if the line states track the logic levels. Also, you can switch to the Counter I/O panel, change the mode to simple event counting, set the event source to the internal 100KHz clock, and start the counter. If the counter is working properly, you should see the counter value increase at a rate of 100000/second.
If the test panels seem to work OK, you may still be able to use the board, despite the resource test failing. I still can't explain why the test fails, though.
Joe -
WebLogic is not responding to client request under heavy load
Under heavy loading, our WLS 6.0 SP2 will be not be responding to client requests
after some time, say, 1 hour. From the administration console, the request throughput
is 0 while request waiting accumulates to over 1,000. Even the clients stop making
request to the server, the request waiting will not drop. It seems that WLS blocked
on some threads and unable to serve the requests (see attached thread dump for
details).
Our configuration is as follow:
OS: SunOS 5.7
Database: MS SQL Server 7.0 running on NT4 Enterprise Edition.
(JDBC Driver is the one bundled with WLS 6.0)
We know that using 'DriverManager.getConnection()' can cause deadlock in number
of cases but we have gone through all the code but all of our Database connections
are obtained through datasource. And the connection is closed properly in finally
block.
Moreover, the application is originally running on WLS 4.51 but no problem is
encountered.
Does any expert know what the problem and solution are?
Thanks!
[session.log]It appears that some threads were possibly blocked at some jDriver calls
initially (ExecuteThread 0,10,15,23 of the default thread pool). WLS JTA
subsequently timed out and rolled back the transactions asynchronously. The
first rollback attempt was blocked at the jDriver level (ExecuteThread 18 of
the default thread pool). Each subsequent rollback retry blocks an
additional execute thread (due to a JTA bug that is fixed in WLS 6.1, but
not 6.0 SPs) - ExecuteThread 1-9,11-26 of the default thread pool.
Eventually, the server ran out of execute threads and became unresponsive.
It is unclear that whether the initial blocking of threads by the jDriver is
a jDriver issue or an application issue. Please report to BEA support at
[email protected] for further assistance.
Regards,
Priscilla
Gary Mok <[email protected]> wrote in message
news:[email protected]..
>
Under heavy loading, our WLS 6.0 SP2 will be not be responding to clientrequests
after some time, say, 1 hour. From the administration console, the requestthroughput
is 0 while request waiting accumulates to over 1,000. Even the clientsstop making
request to the server, the request waiting will not drop. It seems thatWLS blocked
on some threads and unable to serve the requests (see attached thread dumpfor
details).
Our configuration is as follow:
OS: SunOS 5.7
Database: MS SQL Server 7.0 running on NT4 Enterprise Edition.
(JDBC Driver is the one bundled with WLS 6.0)
We know that using 'DriverManager.getConnection()' can cause deadlock innumber
of cases but we have gone through all the code but all of our Databaseconnections
are obtained through datasource. And the connection is closed properly infinally
block.
Moreover, the application is originally running on WLS 4.51 but no problemis
encountered.
Does any expert know what the problem and solution are?
Thanks! -
WLC is not responding to SNMP requests.
Customer is using a 4400 WLC.
He has a management tool that works using the SNMP logs from the controller, he can ping the
controller using this management tool, but when he sends SNMP requests from the management tool the
WLC doesn't reply.
The SNMP server IP address is 192.168.122.11 and the WLC's IP address is 10.20.1.31.
I have the following debug taken from the switchport where the WLC is connected.
'debug snmp agent' shows some interesting messages that confirms that the WLC is not sending a packet back.
Cisco Controller) >debug snmp agent enable
(Cisco Controller) >*SNMPTask: Feb 06 14:38:44.616: SNMPD: Packet from: 192.168.122.11:2509, in_packet_len = 59
*SNMPTask: Feb 06 14:38:44.616: SNMPD: Failed to build in SnmpMessage.
1145 Debug Messages have been dropped*SNMPTask: Feb 06 14:38:44.616: SNMPD: *NOT* sending out packet, out_packet_len = 0
*SNMPTask: Feb 06 14:38:47.621: SNMPD: Packet from: 192.168.122.11:2509, in_packet_len = 59
*SNMPTask: Feb 06 14:38:47.621: SNMPD: Failed to build in SnmpMessage.
*SNMPTask: Feb 06 14:38:47.621: SNMPD: *NOT* sending out packet, out_packet_len = 0
*SNMPTask: Feb 06 14:38:50.652: SNMPD: Packet from: 192.168.122.11:2509, in_packet_len = 59
*SNMPTask: Feb 06 14:38:50.652: SNMPD: Failed to build in SnmpMessage.
*SNMPTask: Feb 06 14:38:50.652: SNMPD: *NOT* sending out packet, out_packet_len = 0
*SNMPTask: Feb 06 14:38:53.684: SNMPD: Packet from: 192.168.122.11:2509, in_packet_len = 50
*SNMPTask: Feb 06 14:38:53.684: SNMPD: Failed to build in SnmpMessage.
*SNMPTask: Feb 06 14:38:53.684: SNMPD: *NOT* sending out packet, out_packet_len = 0
*SNMPTask: Feb 06 14:38:56.715: SNMPD: Packet from: 192.168.122.11:2509, in_packet_len = 50
*SNMPTask: Feb 06 14:38:56.715: SNMPD: Failed to build in SnmpMessage.
*SNMPTask: Feb 06 14:38:56.715: SNMPD: *NOT* sending out packet, out_packet_len = 0
*SNMPTask: Feb 06 14:38:59.747: SNMPD: Packet from: 192.168.122.11:2509, in_packet_len = 50
*SNMPTask: Feb 06 14:38:59.747: SNMPD: Failed to build in SnmpMessage.
*SNMPTask: Feb 06 14:38:59.747: SNMPD: *NOT* sending out packet, out_packet_len = 0
I have also a packet capture taken from the same switchport, I attach it here.
What could be the reason for not responding?You need to add the management tool in the WLC as a trap reciever.
Thanks,
Scott
*****Help out other by using the rating system and marking answered questions as "Answered"***** -
6500 IOS HSRP Gateway not responding to ARP requests
WS-C6509, running Native IOS version 12.2(33)SXH4. Pair of 6500 configured with HSRP serving as Gateway to down stream clients
Ping requests from clients not having a Default Gateway (AIX Server Team recommendation) failing.
Packet capture show ARP requests being received by Gateway 6500, but Gateway will not respond for up to 30 seconds at which point ping requests will start working. But after a period of inactivity, the cycle starts over again - 30 second delay before traffic starts flowing.
Having a Default Gateway is a separate discussion. I'm just interested in being able to provide technical reason why this is occuring.
Anyone experience this?
Any suggestions for addtional troubleshooting measures?
Thanks in advance.Looks to me like a timer problem - maybe a ARP timer on the clients? Check the ARP tables of your clients during your tests.
HTH -
I have a user that sends out a local employee meeting request, so it goes out to about 100 people. She then tracks the responses by opening the event in her calendar, and looking at the information in the people pane. But this only shows her
59 responses. I was having her copy the tracking to a clipboard, then pasting it into an excel sheet. Then she could sort it to see who isn't going, or hasn't responded. but that also only populates 59 people. We use exchange server,
and she's running exchange 2010.
I'd appreciate any help, or suggestions.
thanks,
JeffHi Jeff,
How many people can you see if we open the meeting and view the tracking information from OWA?
Are the missing people external meeting attendees? By default, Microsoft Exchange Server 2010 is not configured to process external meeting requests or meeting responses. Your mailbox has to be configured to process external meeting requests and meeting
responses.
For more information, please refer:
http://support.microsoft.com/kb/2331322
Hope this helps.
Regards,
Steve Fan
TechNet Community Support -
See the proposed image of what I'm looking for in the bottom left of this concept draft. Based on how the participant selects to answer, this meter would go up or down, recording their performance throughout the module. I know it's possible in ZebraZapps. I would think there would be a way in Captivate. Fingers crossed!
This is possible using the Rotator Component Widget from Infosemantics.com.au but it is only compatible with SWF output, not HTML5.
Go to this page and scroll down to the video tutorials about the Rotator Component widget:
http://www.infosemantics.com.au/adobe-captivate/youtube-video-tutorials -
Not able to open "requested end" in user decision task.
Hi All,
In the user decision task, i have specified the value as +5 day in the "requested end" tab. When i executes the WF, and checks in the workflow log of work item, it shows that user decision step as logical deleted. I open that step on developement server, there value is fine as +5 day, then i tried to open that step on quality server where i am testing, when i clicks on that tab button it displays an error message at bottom of the screen "No Unit with the desired conversion factor is maintained", and with in 1 seconds it came out to initial screen of SAP.
I checked the TR, it is imported correctly.
where can be the issue then ? why i am not able to click on that tab in that user decision task, its very strange, i faced this kind of issue first time.
if you have any idea about that why it is happening then please reply.
Regards,
Raman.Check SWU3 is properly maintained in your quality server.
Thanks
Arghadip -
Not able to create request for multiple user in oim 11gr2
Hi,
I am trying to assign a resource to multiple user using oim identity console as System Administrator.
But when i am assigning the resource to multiple user its taking the same value for both the users.
Please let me know how to add the different value for different users.
ThanksThat's the rules of how it works. A request has 1 request form per resource for all users on the request. Those fields must all be marked as available in bulk as well to be viewed if you have more than 1 user on the request. If you need to provide different values based on the user, your best option is pre-populate adapters on the process form and use logic to populate the fields. You will not be able to manually provide different values during the request.
-Kevin -
Is it possible to change submit button's URL link based on user input?
I have a separate html page that does this with a php script, but I had help creating that php file which is just a form that allows users to enter a passcode that I provide them which will then simply link them to an external html page. Since I don't know about php, I am thinking a possible work around would be to have a text input box which would allow a user to enter (passwordA) then click Submit to load (pageX.hmtl) or they could enter (passwordB) and Submit would load (pageY.html).
If anyone knows how I could link my new flash project with my .php file, that would be great, or if there is AS3 code that would do this I would love that!I have the php file on my server and the correct path in my as3 now. Here are the exact codings I'm using:
AS3:
stop();
import flash.events.*;
import flash.net.URLLoader;
import flash.net.URLLoaderDataFormat;
import flash.net.URLRequest;
submit_btn.addEventListener(MouseEvent.CLICK, btnDown);
function btnDown(event:MouseEvent):void {
var variables:URLVariables = new URLVariables();
var varSend:URLRequest = new URLRequest("http://www.jmusicphoto.com/flashClient.php");
var varLoader:URLLoader = new URLLoader;
varSend.method = URLRequestMethod.POST;
varSend.data = variables;
passcode_txt.text = "";
submit_btn.addEventListener(MouseEvent.CLICK, passcodeSend);
function passcodeSend(event:MouseEvent):void{
variables.key = passcode_txt;
varLoader.load(varSend);
flashClient.php:
<?php
if($_REQUEST['key']) {
$key = $_REQUEST['key'];
$key = strtolower($key);
switch($key) {
case 'home':
header('Location: http://www.jmusicphoto.com/index.php');
break;
default:
echo "Oh noes! You got something wrong. You typed " . $key . " maybe there is a mistake?<br><br>";
break;
?>
Practically same php code is working here: http://www.jmusicphoto.com/EOSlogin.php "home" -
I have an iPad mini that will not respond and is non functional. It continues to intermittently try to automatically restart, access home page without success. It will not accept normal charge. I have tried to manually restart, reset and have been unsuccessful. It will not allow a Recover attempt via iTunes as well. Do you have any suggestions before I consider a replacement? Thanks.
Hello RC MD,
It seems you are unable to restore your iPad to factory settings, and it is not responding to power. Based on the information you have provided, it appears your iPad may need to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service.
iPad Repair and Service - Apple Support
Thank you for contributing to Apple Support Communities.
Cheers,
Bobby_D
Maybe you are looking for
-
How do I add my business information to the bottom of my email
how do I add my business information to the bottom of my email. I have a Macbook Pro and Verizon email.
-
Mail crashes every time I try to search while on TRUSH. As soon as I enter the 3rd character in crashes : Exception Type: EXC_CRASH (SIGABRT) IOS 10.9.1
-
[SOLVED] - Changing the root file system to a different disk
Hi, I ran out of disk space on my / partition so I decided to buy a new hard drive, and copy everything over (but with different sized partitions). Hoewever, Arch is still using the old / partition rather than the new one. My new home partition is mo
-
When playing one of my CD's iTunes recognizes the album and automatically gets the music names, however the album artwork is always missing. What should I do to see the album artwork?
-
I am new to ipad. I had been receiving emails on the ipad changed locations (cities) and now have only received one email on the ipod which arrive this evening though several others sent at about the same time did not. I am able to receive email on m