Is it possible to pull a portion of a field into a barcode?

I have a lot # that is entered on the form as "LOT#ISANL100518" I need to create a barcode but the "#" obviousily will not read. Is it possible for me just to pull the last 11 digits into the barcode?
Or is there a better solution where I can preset a prefic "LOT#" on my field.
Any help would be appreciated.

The # character should be readable by any barcode decoding device (hardware or software) so you shouldn't need to worry about.
If you wish to remove the prefix 'LOT#' it can be done with the following script attached to the exit event of the respective text field.
// form1.page1.tf1::exit - (JavaScript, client)
var lot = this.rawValue;
this.rawValue = lot.substring(4,lot.length);
Steve

Similar Messages

IS IT POSSIBLE TO MANAGE AUTHORITY TO MODIFY A FIELD INTO THE GL ACCOUNTS?

Hi everyone,
I´d would like to know if It´s possile GIVE AUTHORITY to some users will be able to modify the field SKB1 - ALTKT into the G/L Account Master Data through transacction FS02. In this way, only the selected users could introduce or modify information on this field.
I´m not sure if it can be done trough a new Z object and assign the object to the transacction and also in the user profiles..or in other way...
Thanks a lot for your help ¡

It is possible to restore his iPod to a backup on his computer (assuming he previously had synced it there and thus created a backup).

In PDP cycle is it possible to pull back transfered PR (from SRM to ECC)?

Dear Friends,
We are working on PDP cycle where backend ECC Purchase Requisition is transferred to SRM client via program BBP_EXTREQ_TRANSFER so that the procurement activity is carried out in SRM.
Now business decides to discontinue the procurement activity from SRM and continue in R/3 only. Which mean business would like to create Purchase Order in R/3 with reference to PR.
So we delete the shopping cart created in SRM and tried to change the Purchasing group so that system removed the procurement profile tag from PR. But system does not allow.
My question is, is it possible to pull back the PR from SRM to ECC after it has been transferred to SRM?
Or in standard process there is no provision to reverse the situation after a PR is transferred from ECC to SRM.
Can anyone through some light on this?
Regards,
Sandeep Parab

Hi Sandeep,
by standard there is no option to send Reqs back to ECC. A moved Req is
blocked in ECC with a flag in EBAN, that sourcing is carried out externally. This
block is removed, when the PO is created. I implemented a push back mechanism
with an extra button in the sourcing cockpit within a classic environment. The
button first takes the SC information and identifies the Req in ECC, sets the
status on blank and releases the Req for sourcing. Finally the SC is deleted from
the sourcing cockpit. With a good programmer the story can be quickly done.
Cheers,
Claudia
Please reward points for useful answers.

Possible to pull location (geotagging) info from Flickr?

I've geotagged all 7,046 of my photos on Flickr. Is it possible to pull that information from Flickr into Places in iPhoto 09?

Yes, Apple added the ability to set geotags via AppleScript in one of the "bug fix" updates to iPhoto. So you'll need to make sure you have the latest version, which you would want anyway because it fixes many (unfortunately not all) of the bugs in Places.
(It made me very happy that they opened a legitimate way for third party developers to geotag, even though it missed the first release. Although for my own app it still took some extra problem solving to get other details right...)

Possible to pull higher resolution single frames from movie?

Hi.
I am currently using iMovie HD 6. I am wondering if it is possible to pull a higher than 72 dpi frame for still picture purposes? Command "F" doesn't seem to give options for higher resolution.
Would moving to Final Cut Express give more still picture options?
Any ideas welcome.
Thanks for any replies in advance.
Thomas

Images in video are defined by their pixel dimensions, for example -NTSC DV is 720x480 non square pixels - which is the square pixel equivalent of 640x480. It really doesn't matter if this is output at 72dpi or 300dpi as it is still 720x480. You get what the camera recorded - no more.
If you need higher quality images (ie more pixels) take still images on the set. Even throw away point and shoot cameras will record an image with more pixels than any video format.
good luck.
x

Is it possible to lose a portion of an application,my i photo starts to boot but never completesn

is it possible to lose a portion of an application,my i photo starts to boot but never completely opens??

Check the logs.

I was running Firefox on another computer that lost it's motherboard, was able to salvage the harddrive, but my mail files on the older hard drive have a different name, how can I pull or import those older files into firefox running on another computer?

I had been running other email clients for years and finally switched to Firefox. All the while importing my other email folders. So I had quite a large history of email. I had been backing up my system using Acronis for years. My desktop's motherboard crashed and was not worth repairing. I pulled my desktop hard drive and turned it in a standalone drive. I re-established my email on a laptop starting from scratch using Firefox. I would like to import (if possible) the emails history that is stored on the standalone drive (formerly my old hard drive). However, the names of the mail folders on the drives are different. For example: current computer the mail folder is named garlic.com. On the standalone drive (old hard drive) there are several folders and they are named, for instance; mail.garlic.com, mail.garlic-1.com , and so forth. it goes up through garlic-4.com.
How can I pull or import these older folders into my current email folder and see all my old email archives?

You are not going to be able to run your old system from the backup on this old computer as the hardware is incompatible.
You need to get a new computer or a refurbished one.

Is it possible to change the order of the fields in the int table?

Hello
Is it possible to change the order of the fields in the int table?
Lets say itab has the following fields :
F1, F2, F3
I would like to see it as F2 F3 F1
Thanks

>
Comandante Che Guevara wrote:
> Lets say itab has the following fields : F1, F2, F3
>
> I would like to see it as F2 F3 F1
What do you mean by "like to see" ? You can WRITE the fields in any order you want. If you want to display the internal table in an ALV you can manipulate the fieldcatalog.
If you want something else other than display the field, you have to explain your req. in detail.
BR,
Suhas

Forms Builder - form not pulling the data from the DB into the datablock

I'm working on a school project, and I'm not sure if I'm doing something wrong, or if something is wrong with my setup.
I created a basic form, 3 fields, and ID, firstname and lastname
the wizard connected fine, pulled the three fields into forms builder
I setup a canvas - type content with the a form format layout of the three fields.
saved the form.
When I run the form and it's displayed, nothing gets pulled into the fields (all blank).
Shouldn't it pull at least the first row from the table?
it says it's on record 1/1
XP, Oracle 10g, Form builder 10.1.2,
I'm not getting any errors
I want to get this basic form working first, before I start adding to it, and it doesn't seem to want to cooperate.
I've done the same steps as in the tutorials....

I did find that, if I put data in the ID, first and lastname on the form, and click Execute & Save on the Menu, it does add it to the database.
Maybe what I'm missing, is how do I get the form to read from the database when it starts up?

Why has iTunes seperated a album which I have copied over from my external hard drive into iTunes? How can you pull all the songs back together into one album again?

Why has iTunes seperated a album into indevidual songs, which I have copied over from my external hard drive into iTunes? How can you pull all the songs back together into one album again?

Steve MacGuire a.k.a. turingtest2 - iTunes & iPod Hints & Tips - Grouping Tracks Into Albums - http://www.samsoft.org.uk/iTunes/grouping.asp (older post on Apple Discussions http://discussions.apple.com/message/9910895)
Quick answer: Select all the tracks on the album, File > get info, and either give them all a single "album artist", or check the "compilation" flag (as in https://discussions.apple.com/message/17670085).
If these are from multiple-CD sets you may also need to enter the appropriate information in the disc number fields. If they are not a multiple CD set you still need to make sure the disc number fields are set correctly or all empty.

How do I copy the string portion of an enum into the string portion of a cluster?

I want to do this for the an entire array of clusters. I'm trying to use a for loop. Can't figure out how to parse the string portion of the enum into the string portion of the cluster.
Alternatively, I'd be happy if I could figure out some way to tie the enum to the array of clusters, but I figure that gets problematic.
DH
Solved!
Go to Solution.

Dark Hollow wrote:
OK, let's say that the enumerated type has N elements. I want to initialize an N element array of strings. How do I reference each string in the enumerated type to get to each string?
Easy way to do this is to use GetNumericInfo.vi, part of the Variant library, found in vi.lib\utility\VariantDataType\GetNumericInfo.vi. Wire your enumeration to the Variant input; one of the outputs is an array of the strings in the enumerated type.
The more complicated way is a for loop, in which you typecast the iterator terminal value to the enumerated type, then use Format Value. You can get the maximum value of the enumeration by casting 0 to the enumerated type, then decrementing; cast that back to a numeric and add one to get the right value to wire to the N terminal.
EDIT: just thought I'd add, since RavensFan's reply popped up while I was writing mine - I don't like the Strings[] approach because it doesn't work on RT targets, and I lost a lot of time once due to this trying to figure out why my code wouldn't run properly on an RT system but worked great on my development computer.

Is it possible to drop animated files from edge cc into premier pro cc ?

is it possible to drop animated files from edge cc into premier pro cc ?

Hi paddymaxg,
As far as I know, there is no such workflow.
Thanks,
Preran

Pulling a value from a field for a SQL statement

How do i pull the value from a Formatted Text Field into a sql query? Im trying to create an interface to allow a user to put the first name in a field then poll the database for anyone of that name. I do not know of how to get the value that is put in the field by the user.

Roy, can you give more details about what version of JDeveloper you are using?

Is it possible to change the compiler that is built into Sun Creator?

Is it possible to change the compiler that is built into Sun Creator?
I would like to compile my project to run under the JNI. I have tried to use the command line to run the javah -jni filenames but I always get errors and my assumption is that I need to change or adapt the IDE WITHOUT violating any licensing agreements to get the JNI working in this IDE.
I would appreciate any help that I could get in regards to this issue whther someone from SUN wants to comment or if any developer's have had this issue and have solved it...

Okay, I just tried this. I changed the default location of J2SE JDK in the creator conf file. Saved the file.
For example:
#netbeans_jdkhome="C:\Program Files\Sun\Creator2_1\java"
netbeans_jdkhome="C:\Program Files\Java\JDK1.5.0_04"
On restarting the IDE the new path is taken. To see the change: go to main menu -> Help -> About Java Studio Creator . Go to Detail tab. You will see the values for Java and Java Home changed as per your change in the creator.conf file.
Hope this helps.

Is it possible to have "Condition based custom project field entry in project detail page"

Hello All,
In PWA, In Project details page, when we add Displayed Project fields into the Project Information page, Is it possible that I have a custom enterprise field and based on its selection, I can choose the other field in that page.
I mean, say i have a Custom field in project page as 'Hardware' which has a lookup of say :
CD
DVD
Flash Drive
External HDD
Cloud etc.,
Then when a user selects any one of these. then the below appearing options will be based on this selection.
Say user selects cloud, then the next project field should be like Public, Private or Hybrid. Which is not same when user selects other fields.
I did not find any OOB solution for this. So can anyone please guide me how can I achieve this in PWA, so that these fields may be used as enterprise custom fields, which can be later used for Reporting purposes.
Thanks,
Shanky

Hello,
You could adopt this no code out of the box option approach:
http://psbehindthescene.blogspot.co.uk/2014/04/cascading-custom-fields.html
Or potentially look at adding JavaScript code to the page to do this programmatically - not looked at doing this but it should be possible.
Another option might be Fluent Pros Auto Complete Manager - this might offer this functionality but I have never used it:
http://www.fluentpro.com/productsautocomplete.html
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS |
MVP | Downloads

Is it possible to pull a portion of a field into a barcode?

Similar Messages

Maybe you are looking for