Mac Mini (Mid 2011) display artifacts HDMI to DVI at native res

Hello,
I recently changed monitor configurations and in the process moved my Mac Mini (Mid 2011) to a HP LP2065 monitor.  The connection is made through the stock supplised HDMI to DVI adapter.   The monitor and the DVI cable work successfully with other machines.
What occurs is only certain colors, usually black,  result in the display being red and/or sparkling and/or static (like TV static) when the monitor is set at its native resolution of 1600x1200.
If I bump the resolution down to 1280x1024, or lower,  the black color returns and I see no display glitches.   If I bring the resolution back up to 1600x1200,  the display artifacts return.
A few google searches suggest I use a DisplayPort to DVI adapter instead as some monitors are "finicky".   Does anyone agree with that?  It seems peculiar to me -- why would a digital signal have analog-looking glitches? 
Any ideas welcome.. thanks for reading

Your monitor has a native pixel resolution of 1920x1200.  There is no point in trying for 1080-p or -i.
I run two 1920x1200 monitors via HDMI (with passive cable adapters where necessary) and I use these choices:
...and they are both pixel-sharp, filling the screen, and yet menu bars totally visible!

Similar Messages

  • Mac Mini (mid 2011) Display Issues

    Hello.
    Recently I started having some issues with the display from my Mac Mini (mid 2011, core i7, 8GB, OS X 10.9). During usage the screen started flickering erratically and then went blank. I turned the Mac off and found that it was very hot so I removed the bottom cover and the RAM chips and gave it a bit of a clean (it was quite dusty) then I allowed it to cool before putting it back together. After putting it back together it worked for about a day until it had the same problem.
    Now on startup the following occurs:
    1. On the start-up screen (where the Apple logo is displayed) the screen is overwhelmingly pink (display RGB settings are fine), except for the left half of the Apple logo which remains grey.
    2. After progressing through the start-up screen the display goes white and nothing further happens.
    I have checked the display and it works fine. The HDMI cable is not the issue either.
    Does anyone have any ideas as to what might be causing this and a possible fix?
    If it is of any help the monitor is an ASUS MT276H.
    Thanks.

    So I have tried a SMC reset and all that has changed is the front indicator light is off and the fan has kicked it up to 11. Please find a picture of the display I described earlier at the following link: https://www.dropbox.com/s/wirrc01xut3p8tx/Photo%201-12-2013%2010%2054%2004%20pm. jpg (sorry it was taken with an iPhone 4).
    I have never performed an SMC reset before but it seems like it is taking a long time and/or not working. I'm at a loss to what this might be.

  • Mac mini mid-2011 display issues 1920x1200 on a HDMI monitor?

    Just puchased a mac mini and am challenged by the display settings.  When I first powered it on using either a display port to HDMI or supplied hdmi to DVI (then the monitor's DVI to HDMI cable), the display is severly off center with issues seeing the system bar on top and icons on bottom.  So, once I was able to get to the System Panel, I found that it configured itself to 1920x1200.  I cannot get 1080p to center and 1080i has grainy text.  Does this mean I need another apple accessory, ie display port to vga?  Or is this an indicator that monitor and mac mini are incompatible?  Or is this an indicator that the mac mini has a lemon card?
    (NOTE: I am downloading system updates to see if there is a firmware update. Thanks
    Proc - 2.5 i5
    Mem - 4 GB
    Graphics - Radeon 6630M
    OS - OX Lion 10.7.3
    Monitor- LG L246WP  (3 hook ups: componet, vga, hdmi)

    Your monitor has a native pixel resolution of 1920x1200.  There is no point in trying for 1080-p or -i.
    I run two 1920x1200 monitors via HDMI (with passive cable adapters where necessary) and I use these choices:
    ...and they are both pixel-sharp, filling the screen, and yet menu bars totally visible!

  • Highest dual display resolution for mac mini mid 2011

    I am currently running a mac mini mid 2011. As I've understood (according to the below statement). Am I only able to use 2 secreen with 1920x1200 or could I use one screen with 2560x1600 and one with 1920x1200. I do NOT want mirroring, only dual displays.
    I am going to connect the screens in the following way:
    1x mini-dvi - HDMI to one screen.
    1x HDMI - HDMI to the other screen.
    Display Support:
    Dual Displays
    Resolution Support:
    1920x1200*
    Details:
    *This model simultaneously supports 1920x1200 on an HDMI display or a DVI display using the included HDMI-to-DVI adapterand 2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).
    2nd Display Support:
    Dual/Mirroring*
    2nd Max. Resolution:
    2560x1600*
    Details:
    *This model simultaneously supports 1920x1200 on an HDMI or a DVI display (using the included HDMI-to-DVI adapter) and2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).
    Thanks in advance
    Rich

    According to the copy&paste from wikipedia, HDMI should support higher resolution than 1920x1200. So the question is, does it aupport that on the mid 2011 mac mini. It says in the specifications
    "Mac mini is designed to work with HDMI devices that comply with versions 1.0, 1.1, 1.2, 1.2a, 1.3, 1.3a, and 1.4 of the HDMI specification."
    That should mean it should be able to support it, but I don't know : <
    HDMI version
    1.0
    1.1
    1.2
    1.3
    1.4
    2.0
    Date initially released
    December 9, 2002
    May 20, 2004
    August 8, 2005
    June 22, 2006
    May 28, 2009
    September 12, 2013
    Maximum clock rate (MHz)
    165
    165
    165
    340
    340[109]
    600
    Maximum TMDS throughput per channel (Gbit/s) including 8b/10b overhead
    1.65
    1.65
    1.65
    3.40
    3.40
    6
    Maximum total TMDS throughput (Gbit/s) including 8b/10b overhead
    4.95
    4.95
    4.95
    10.2
    10.2
    18
    Maximum throughput (Gbit/s) with 8b/10b overhead removed
    3.96
    3.96
    3.96
    8.16
    8.16
    14.4
    Maximum audio throughput (Mbit/s)
    36.86
    36.86
    36.86
    36.86
    36.86
    Maximum color depth (bit/px)
    24
    24
    24
    48[a]
    48
    Maximum resolution over single link at 24-bit/px[b]
    1920×1200p60
    1920×1200p60
    1920×1200p60
    2560×1600p75
    4096×2160p24
    4096×2160p60
    Maximum resolution over single link at 30-bit/px[c]
    N/A
    N/A
    N/A
    2560×1600p60
    4096×2160p24
    Maximum resolution over single link at 36-bit/px[d]
    N/A
    N/A
    N/A
    1920×1200p75
    4096×2160p24
    Maximum resolution over single link at 48-bit/px[e]
    N/A
    N/A
    N/A
    1920×1200p60
    1920×1200p60
    Maximum 3D resolution (using a full resolution 3D format) over single link at 24-bit/px
    N/A
    N/A
    N/A
    N/A
    1920×1200p60

  • Mac Mini (mid-2011) dual display with extended desktop

    Can Mac Mini (mid-2011) dual display different picture on HDMI TV and DVI monitor. I can only get it to mirror and not display different programs or extended desktop. Can i "extend" instead of "mirror"? and how

    Hi David it should...
    Display Support:
    Dual Displays
    Resolution Support:
    1920x1200*
    Details:
    *This model simultaneously supports 1920x1200 on an HDMI display or a DVI display using the included HDMI-to-DVI adapter and 2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).
    2nd Display Support:
    Dual/Mirroring*
    2nd Max. Resolution:
    2560x1600*
    Details:
    *This model simultaneously supports 1920x1200 on an HDMI or a DVI display (using the included HDMI-to-DVI adapter) and 2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).
    Are you using splitter maybe?

  • Mac mini (mid 2011) to Samsung led tv via hdmi connection problem.

    Samsung led tv - UE32D5000
    Mac mini (mid 2011)
    On regular monitor (connected by hdmi to dvi cable) setup teamviewer
    Try to:
    1. Connect different hdmi cables - dose not work (on apple tv - both cables work)
    2. Connect hdmi cable to different hdmi ports.
    3. On tv change type of source - PC, PC-DVI and other.
    By teamviewer I watched what was going on the computer - Mac mini does not recognize tv like monitor by pressing 'seek monitor'.

    Aha! Similar problem here; Mini (Intel, Macmini2,1, the 2007 version with the larger HDI port not the smaller one)
    Problem seems to happen only with both HDMI and USB connected (USB only to use the built-in webcam on the monitor, an AOC V22+ (which I love, it's a very nice monitor; LED instead of fluorescent backlight).
    Sometimes it would suddenly switch to where the dock and menu bars and status bar were hidden (the desktop gets 'too big for the screen).
    Then I'd go to the Display settings and unselect "overscan"
    Then it'd be OK for a while, then switch to a big black space around the desktop window, lots of unused screen).
    Then I'd go to the Display settings and reselect "overscan" and it'd be Ok.
    For a while.
    There really ought not be a need to fiddle with 'overscan' at all -- since I'm not using this as a television. Mac OS 10.3.6 seems to mistakenly think the monitor is being used as a TV -- maybe when there's a video in a browser window?
    Not sure.
    Anyhow it becomes a rock-paper-scissors problem where I have to keep chasing the settings to undo whatever it changes to at random, Lather rinse repeat.
    Seems like it's only a problem for me when I have the USB cable also connected, to use the built-in webcam -- so I don't use that now.
    The AOC folks have been working hard on solving this.
    I just found this topic and have referred them here.
    They'll be glad to know it's not their problem, I guess.
    (does it happen on Apple brand displays too? I'm not sure)

  • How do you plug a VGA monitor to a Mac mini (mid 2011)

    I used my older Mac mini (mid 2007)  with a VGA LCD monitor through an "DVI to VGA" adapter with no problems.
    However, this older adapter does not fit in the "HDMI to DVI Adapter" supplied with my new Mac mini (mid 2011).
    There are no receptacles (holes) in the "HDMI to DVI adapter" for the four pins located around the flat tab on one hand of the older adapter .
    Any suggestion on how to plug a LCD VGA monitor to a mid 2011 Mac mini?
    I know there is a Thunderbolt port and a HDMI port,
    but being able to use an inexpensive VGA monitor for set-up and periodic maintenance,
    without having to fire up a huge plasma screen each time, would be nice.
    There is no displayport on this mid 2011 Mac mini.
    There does not seem to be any HDMI to VGA nor  Thunderbolt to VGA adapters on the market.
    Any suggestions?

    The > Apple - Thunderbolt Port is the same as and doubles as a Mini DisplayPort.
    Look down at the bottom of > Mac mini (Mid 2011) - Technical Specifications in the Accessories / Displays and Graphics section or on page #33 of your User Guide.

  • Mac Mini mid 2011 Mini Dvi to VGA problems

    I have a mac mini mid 2011 and I have to connected to a display in work.  The display only has a VGA entrance, so i bought a mini dvi to vga adapter from my local mac store, but when i connected to the display everything looks odd, the whole display has an odd purple look, I have tried to use a different VGA cable but keep having the same problem, I even tried a different display with the same results, anybody knows why this happens and how to fix it?

    Your welcome!
    On your end before returning the Adapter,
    try > Resetting the System Management Controller
    1. Shut down the computer.
    2. Unplug the computer's power cord.
    3. Wait fifteen seconds.
    4. Attach the computer's power cord.
    5. Wait five seconds, then press the power button to turn on the computer.
    and > About NVRAM and PRAM
    1. Shut down the computer.
    2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    3. Turn on the computer.
    4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    6. Release the keys.
    then if that doesn't help, return the adapter and explain the problem to the Apple tech person at the store.

  • Mac mini mid 2011 won't boot

    This morning I found my Mac mini mid 2011 frozen. I shut it down by holding the power button.
    Now it does not boot. When I turn it on I don't hear the usual chime sound or any other beeps. I can hear the hard drive powering on and the fan starts to work at full speed. Nothing appears on the monitor. No output signal at all.
    I have tried disconnecting all cables, press power button for five seconds and the. Try to boot again. No luck...
    Any ideas?? I loads of work to do and I am loosing hope. No apple stores in Greece to take it in...

    I've tried everything including SMC rreset. No luck.
    One other clue is that if try to boot up without Ram installed, it recognizes that ram is missing and beeps  
    so to summarize the symptoms:
    1. Computer has power
    2. No chime sound or any other beep when I power the computer on
    3. Fan works at full speed
    4. No output display signal
    5. I can hear the hard drive powering on
    6. The computer recognizes if you try to boot it without ram and beeps

  • Mac Mini (Mid-2011 Core i7) Slow after Yosemite Upgrade

    I've searched the other "slow after Yosemite upgrade" threads but those seem to relate to Core Duo 2 machines with less RAM.  I have a Core i7 MM w/ 8GB of RAM, after the Yosemite upgrade it constantly lags, I can barely type on it these days because the text lags so badly.  It's unusable to say the least.  Is there anything I can do to speed it up?  There must be a reason why the performance is so bad.
    Problem description:
    Slow after Yosemite upgrade.
    EtreCheck version: 2.1.8 (121)
    Report generated 1 March 2015 8:48:15 pm AEDT
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        Mac mini (Mid 2011) (Technical Specifications)
        Mac mini - model: Macmini5,2
        1 2.7 GHz Intel Core i7 CPU: 2-core
        16 GB RAM Upgradeable
            BANK 0/DIMM0
                8 GB DDR3 1333 MHz ok
            BANK 1/DIMM0
                8 GB DDR3 1333 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
        AMD Radeon HD 6630M - VRAM: 256 MB
            Thunderbolt Display 2560 x 1440
            DX80 spdisplays_1080p
    System Software: ℹ️
        OS X 10.10.1 (14B25) - Time since boot: 12:20:13
    Disk Information: ℹ️
        Hitachi HTS727575A9E362 disk0 : (750.16 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            Macintosh HD (disk1) / : 748.96 GB (551.28 GB free)
                Encrypted AES-XTS Unlocked
                Core Storage: disk0s2 749.30 GB Online
    USB Information: ℹ️
        Apple Inc. BRCM20702 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Computer, Inc. IR Receiver
        Apple Inc. iPad
        Apple Inc. Apple Thunderbolt Display
        Apple Inc. FaceTime HD Camera (Display)
        Apple Inc. Display Audio
    Firewire Information: ℹ️
        BUFFALO INC. HDD 800mbit - 800mbit max
            EFI (disk2s1) <not mounted> : 210 MB
            ext2tb (disk2s2) /Volumes/ext2tb : 2.00 TB (686.75 GB free)
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
            Apple Inc. Thunderbolt Display
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /Library/Extensions
        [loaded]    com.sophos.kext.sav (9.2.50 - SDK 10.8) [Click for support]
        [loaded]    com.sophos.nke.swi (9.2.50 - SDK 10.8) [Click for support]
            /System/Library/Extensions
        [loaded]    com.Cycling74.driver.Soundflower (1.5.1) [Click for support]
        [not loaded]    com.aliph.driver.jstub (1.1.2 - SDK 10.7) [Click for support]
    Launch Agents: ℹ️
        [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
        [running]    com.sophos.uiserver.plist [Click for support]
        [running]    net.culater.SIMBL.Agent.plist [Click for support]
        [loaded]    org.gpgtools.gpgmail.enable-bundles.plist [Click for support]
        [loaded]    org.gpgtools.gpgmail.patch-uuid-user.plist [Click for support]
        [loaded]    org.gpgtools.Libmacgpg.xpc.plist [Click for support]
        [loaded]    org.gpgtools.macgpg2.fix.plist [Click for support]
        [running]    org.gpgtools.macgpg2.gpg-agent.plist [Click for support]
        [loaded]    org.gpgtools.macgpg2.updater.plist [Click for support]
    Launch Daemons: ℹ️
        [running]    com.adobe.ARM.[...].plist [Click for support]
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [running]    com.fitbit.galileod.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
        [running]    com.sophos.common.servicemanager.plist [Click for support]
        [loaded]    org.gpgtools.gpgmail.patch-uuid.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [failed]    com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist [Click for details]
        [running]    com.google.Chrome.framework.plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
    User Login Items: ℹ️
        Google Drive    Application  (/Applications/Google Drive.app)
        Dropbox    Application  (/Applications/Dropbox.app)
        SpiderOak    Application  (/Applications/SpiderOak.app)
        AirServer    Application Hidden (/Applications/AirServer.app)
        Plex Media Server    Application  (/Applications/Plex Media Server.app)
        Box Sync    Application  (/Applications/Box Sync.app)
    Internet Plug-ins: ℹ️
        FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
        AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
        Flash Player: Version: 16.0.0.235 - SDK 10.6 Outdated! Update
        QuickTime Plugin: Version: 7.7.3
        SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Click for support]
        GarminGpsControl: Version: 4.2.0.0 - SDK 10.8 [Click for support]
        Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Click for support]
        JavaAppletPlugin: Version: Java 7 Update 21 Check version
    User internet Plug-ins: ℹ️
        WebEx64: Version: 1.0 - SDK 10.6 [Click for support]
    Safari Extensions: ℹ️
        1Password
        AdBlock
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
        GPGPreferences  [Click for support]
        Java  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 748.96 GB Disk used: 197.68 GB
        Destinations:
            ext2tb [Local]
            Total size: 2.00 TB
            Total number of backups: 38
            Oldest backup: 2012-10-07 09:09:10 +0000
            Last backup: 2015-03-01 09:07:46 +0000
            Size of backup disk: Adequate
                Backup size 2.00 TB > (Disk used 197.68 GB X 3)
    Top Processes by CPU: ℹ️
            40%    WindowServer
            12%    firefox
             2%    Activity Monitor
             1%    Box Sync Monitor
             1%    sysmond
    Top Processes by Memory: ℹ️
        533 MB    mds_stores
        498 MB    firefox
        429 MB    softwareupdated
        172 MB    InterCheck
        155 MB    SpiderOak
    Virtual Memory Information: ℹ️
        8.58 GB    Free RAM
        4.31 GB    Active RAM
        2.49 GB    Inactive RAM
        1.79 GB    Wired RAM
        10.08 GB    Page-ins
        0 B    Page-outs
    Diagnostics Information: ℹ️
        Mar 1, 2015, 08:38:46 PM    /Library/Logs/DiagnosticReports/SpiderOak_2015-03-01-203846_[redacted].cpu_reso urce.diag [Click for details]
        Mar 1, 2015, 08:30:37 PM    /Library/Logs/DiagnosticReports/WindowServer_2015-03-01-203037_[redacted].cpu_r esource.diag [Click for details]
        Mar 1, 2015, 04:42:31 PM    /Library/Logs/DiagnosticReports/firefox_2015-03-01-164231_[redacted].cpu_resour ce.diag [Click for details]
        Mar 1, 2015, 08:26:20 AM    Self test - passed

    When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.  
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
    Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Mac mini mid 2011 video blinking out too

    As the 2012 mac mini, my mac mini mid 2011 with the 3000 graphics chipset, has video blinking out every hour for about a second, since I upgraded from an ancient cinema display (1600x1040) to a DELL U2713HM 2560x1440 pixels. The old display blinked very rarely too, which I thought to be dips in the grid. The new display blacks out every hour for 1-2 seconds. And when the machine is heavily loaded (xcode indexing 500 files): about every minute.
    It is becoming really acute since I updated to OS X 10.8.5 (12F37), and  even WORSE and UNWORKABLE: when the video now blinks the monitor enters power save mode, and I need to switch off and on the monitor to wake up video...
    Thunderbolt Bus:
      Vendor Name:    Apple Inc.
      Device Name:    Mac mini
      UID:    0x0001000C170B0D00
      Firmware Version:    25.1
      Port:
      Status:    No device connected
      Link Status:    0x100
      Port Micro Firmware Version:    2.1.3
    I connected the display via a mini-displayport to displayport cable (the DELL has a displayport port too), but I don't think that is relevant. I don't have that ridiculously overpriced dual-link DVI converter.
    Filed a bug at Apple, submitted some system reports when the prob occurred. I hope they will release a firmware fix, or I'll take the mini back to the shop.

    Hi Rick, I'd see if it's reated to this, which has many symptoms...
    Try this: "sudo pmset autopoweroff 0" and "sudo pmset standby 0"
    http://xlr8yourmac.com/archives/sep13/091313.html#10.8.5SleepEjectTip

  • Mac Mini mid 2011 Windows 7 64 Bit crashes to blue screen after install of Boot Camp Drivers

    Hello.
    I have installed Windows 7 64 bit on my Mac Mini mid 2011. After the install, I install the Bootcamp Drivers and then after the restart it starts to load and then crashes. Is there some trick to get it to work, It runs fine if I do not install the drivers, but not much works on it.
    Thank you in advance for any help.

    Hi,
    Same thing here - but on Mac mini mid 2010...
    I have installed the newest drivers downloaded via Boot Camp Assistant 4.0 (from Lion 10.7.1) on Windows 7 64-bit but the updated graphic driver causes my both screens (monitor - MiniDisplayPort and TV - HDMI) to go black, and eventually computer restarts or freezes.
    I did some checks reinstalled whole windows, narrowed search to graphisc drivers and can confirm that up to BootCamp version 3.3 (nvidia ver. 19x.x) everything is fine but drivers from Boot Camp 4.0 (nvidia ver. 26x.x) simply render Windows 7 in 64-bit variant useless.
    I look forward to some sort of solution or update from Apple as soon as poddible...!!

  • Windows 8 Release Preview on Mac Mini mid 2011

    I was wondering if its possible to install Windows 8 Release Preview on a Mac Mini mid 2011 via Bootcamp (Mainly for gaming purposes)

    I've finally got it installed on my HP Touchsmart 610-1000t (or whatever the number is).....
    Apparently it's a graphics card/driver issue. 
    I downloaded the enterprise final release and it did the same thing to me (black screen etc etc).
    In the end, I highly doubt some of these models are compatible with windows 8 if the final release is giving me the same problem.  The only difference is- now the sleep button worked, so I fiddled around with it until I got it fully installed (user created).  After doing so, I booted into Safe mode and disabled the graphics driver/restarted and it booted up fine/works fine.  Every now and then it crashes on IE10.  I wasn't able to test the touch capabilities during the releases between developer and final, so it wasn't until now I can finally test the functionarlity of ALL the gesture functionality.  I can say, the combination of the touch screen desktop and short cut keys makes everything so much quicker and easier.  I perfer windows 8 over windows 7 on my touchscreen, finally the touchscreen experience is much better! Of course I still use my keyboard and mouse.  The touch pinning/swiping is awesome.  I can't say the same for normal desktops in a corporate environment (without touchscreens).....I can say however- windows 8 tablets would be really nice in place of my Ipad or my laptop that I carry around from meeting to meeting, thus the reason I'm waiting for the Surface!  CItrix and apps can only take you so far.

  • I have a mac mini mid 2011, this device have; 2,3GHz and 2 Gb Memmory.I want to upgrade the memory and i need the list of supported memory modules

    i have a mac mini mid 2011, this device have; 2,3GHz and 2 Gb Memmory.I want to upgrade the memory and i need the list of supported memory modules. i am from turkey.

    Welcome to Apple Support Communities
    The Mid 2011 Mac mini supports 8 GB of memory officially, but you can install up to 16 GB of RAM, so you can use 2, 4 and 8 GB modules. You can buy more RAM from OWC or Crucial.
    If you are looking for memory at a local shop, make sure you buy 1333 MHz DDR3 memory. See > http://support.apple.com/kb/HT4432?viewlocale=en_US&locale=en_US

  • Does a 500 GB SSD work in a Mac Mini (mid 2011)?

    I have a Mac Mini (mid 2011), 2.5 GHz and 4 GB of memory.
    The iOS app called MacTracker says that this model is "configurable to 256 GB solid-state drive or 256 GB solid-state drive and 750 GB (7200-rpm) hard drive".
    I was thinking about buying a Samsung Electronics 840 EVO-Series 500GB 2.5-Inch SATA III Single Unit Version Internal Solid State Drive. My doubt is: will it work in my Mac Mini or the maximum storage must be 256 GB? If it runs a 500 GB SSD, a Samsung EVO SSD would be a possible (or a perfect) choice?

    The info from MacTracker brings up the options available in a Configuration to Order
    at the time the product was new; so that tells people who may have found their unit
    bought with odd specs, such upgrade may be due to a CTO Apple factory upgrade.
    Other options that can work, of even higher spec capacity, can be researched in
    such mac-centric sites as macsales.com and others who have a reputation for
    customer service and quality products; many have information on their sites...
    Doesn't hurt to ask. OWC macsales may even have an online chat. Info on how
    to upgrade Apple products with later parts (out of warranty, etc) is available in
    their page as well as iFixit.com guides. Everymac.com also offers spec info.
    Good luck & happy computing!

Maybe you are looking for