Is it possible to run an IdocScript Query with Service GET_SEARCH_RESULTS?

Hi All,
I need to run the below query with GET_SEARCH_RESULTS service.
dDocType <matches> `ArchivePackage` <AND> xSubmissionDate < `10/08/13 11:03 AM`  <AND> xArchiveDocName <EQUALS> dDocName
Part of this query works fine but when the part in BOLD is also used I get an error, reason being there is nothing like <EQUALS> when using QueryBuilder
Instead is it possible to run the below idocscript with any service?
<$ (dDocType like 'ArchivePackage') & xSubmissionDate < dateCurrent(-365) & (XArchiveDocname == dDocname) $>
I tried it with GET_SEARCH_RESULTS, but got wrong results and no error.
Is this even possible or should I just change my approach?
Regards

I tried to search more info on this one. It is true that in all cases the operator is followed by a constant - see e.g. https://blogs.oracle.com/interactions/entry/ucm_get_search_results_with_full_text_search
Honestly, I see no reason why a reference to another metadata could not be made, but the parser might just fail on it. If you can, try to get an official answer from support via Metalink. Alternatively, you can decompile the code processing the service and check why parsing fails when non-constants are used.

Similar Messages

  • Is it possible to run Oracle 6i application with Oracle 11g?

    HI,
    We are running oracle developer 6i (6.0) application with oracle 10g database.
    Due to some management decisions we are in planning to upgrade the database to 11g.
    So, tell us that Is it possible to run Oracle 6i application with Oracle 11g?
    Regards,
    fazijee

    Also see Oracle Support note
    Is Forms/Reports 6i Certified to Work Against Oracle Server 10g Rel 1, Rel 2 or 11gRel 1, Rel 2? [ID 338513.1]
    6i isn't certified nor will be certified against 10.2 and 11.x
    Hemant K Chitale

  • Is it possible to run a Windows domain with a Mac Server?

    Looking for some advice on getting rid of our Windows domain controller (DHCP server, AD, etc.) in favour of a Mac Server (which we own).  Is it possible to run a Windows domain with a Mac Server?

    Snow Leopard Server (10.6) and earlier included Samba which supported acting as an NT Domain Controller (this pre-dates Active Directory). Lion (10.7) and later as standard can no longer act as an NT Domain Controller nor can they act as an Active Directory server.
    So the short answer is no.
    Theoretically you could port Samba4 to a Mac and Samba4 can act as an Active Directory server. In reality this is not going to be easy but is theoretically possible.
    An easier option might be to run a copy of Linux (e.g. Ubuntu) in a virtual machine e.g. using VirtualBox and then run Samba4 in that and configure it to act as and Active Directory server. Then you could connect the Mac side to the Samba4 Active Directory server. This approach would use all Mac hardware, and not have any extra costs of licenses to buy and as far as all the rest of the network is concerned would be a standard Active Directory server environment.

  • Is it possible to create input ready query with free characteristics ?

    Hi All,
    Is it possible to include characteristics restricted with variables in free charatceristics panel to make input ready query?
    I am trying to create input ready query with above practice but unable to make query as input ready.
    I have created input ready query on aggregation level. If I include characteristics restricted with variables in rows or filter then it is working fine. .ie. I am able to input entries at runtime of query.
    Kindly help me out to find the solution as I have to include characteristics in free characteristics panel.

    Hi Tilak,
    Thanks for reply.
    As per my knowledge, Every characteristics which is included at aggregation level should be included in either rows or filter level in query designer.
    But as per my business requirement I have to include the characteristics restricted with variables( in default values only) in free characteristics. But the problem is if I do so the query runs in display mode not in input mode.
    So kindly help me if you have any solution for above scenario.
    ---Shamkant

  • Is it possible to run a server cluster with Mavericks?

    Is it possible to run a server cluster, like using XGrid, but with Mavericks? I have a Mac Mini server and an older iMac lying around that I want to put to good use. If so, what software would I need and how should I set it up? Will I be able to link the 2 computers over Wifi or must it be Ethernet?

    Sadly Apple no longer provide Xgrid for clustering it was last available with Lion aka. 10.7.x.
    For any equivalent clustering capability you are either going to have to use an open-source Linux originated clustering solution like Slurm, Moab, or Beowulf. Then you have to applications written to be compatible with such solutions. This was the beauty of Xgrid in that it provided a framework that Mac applications could be compatible with.
    Note: Clustering is not the same thing as a Storage Area Network. It is still possible to build a SAN using Macs even in Mavericks and Apple still support Xsan for this.
    With regards to using WiFi or Ethernet, both would work but it will depend on how much data needs to be transferred (per second) as to wether WiFi would be up to the job, some tasks require lots of data to be transferred other tasks e.g. BitCoin mining do not.
    Apple did come up with another framework called Grand Central Dispatch. In theory that might be extended to work in a cluster. However while GCD is now open-source I get the impression it is also abandoned by Apple See https://libdispatch.macosforge.org

  • Can't install quicktime or itunes I recieve error code 2738.  I'm running windows Vista 32 with Service Pack 2.  I have tried old and new version of both programs.  Also, have gone through Apple's online help with no good outcome

    Can't install quicktimeor uninstall it for that matter and itunes I receive error code 2738 with both downloads.  I'm running Window Vista with Service Pack 2.  I have check for all window update.  I have gone through Apple itune help list.  Even going into cmd to do regsvr32 vbscript.dll which was successfull. Can you help...my son had to register his ipod at the neighbors house..What going on.
    Son even call apple with no help and was give Microsoft number no help there either they wanted me to call HP.....run around

    Excellent news!
    Strange how sometimes the fixit works better than the manual methods, and sometimes the manual methods work better than the fixit. It differs from Microsoft fixit to Microsoft fixit too. (Unfortunately, because these "anomalous 2738s" are pretty rare as install errors go, I don't have a good feel yet for whether or not it's the fixit or the manual method that's more likely to work in iTunes/QuickTime installation contexts.)
    Afraid I'm not very good on earbud troubleshooting, but fingers crossed the folks over at the iPod communities might be able to help:
    https://discussions.apple.com/community/ipod

  • Exploring  the   possibility of running a BW query through  Web Dynpro

    Hi,
       I would like to extract data from BW query and its output of should  populate into the selection screen which is developed in Web Dynpro.
    Can anyone please help me out .....
    Regards
    Padma N

    I got a very useful answer from Thomas Jung (SAP) via a site he did setup with a couple of other SAP experts, also see http://enterprisegeeks.com/blog/2009/03/31/abap-freak-show-april-1st-acf-updownload-in-web-dynpro-abap/comment-page-1/
    My question:
    I think this new UI element ACFUpDownload cannot be used to do mass uploads/updates of data that need to be stored in SAP tables?
    Answer Thomas:
    This UI element is just about the transfer of data from the client machine to the server. It has nothing to do with how the data is used or processed after upload. Think of it as the equal to the CL_GUI_FRONTEND_SERVICES class and methods GUI_UPLOAD and GUI_DOWNLOAD.
    My question:
    Is there a tool like LSMW, CATT, eCATT that we can use for recording webenabled transactions (applications developed in Web Dynpro ABAP)?
    Answer Thomas:
    You shouldnu2019t need a tool like LSMW, CATT, eCATT that is tied to the user interface. With WDA you should be using MVC to design your application. This is part of the reason for MVC so that you have a clear separation of the model - business logic. You should always have a reusable class that can be called to input and create data with the same validations without going through the user interface. This is the process that SAP is following as we create new WDA screens. We use the enterprise services and their implementation classes as the Model for the WD Components. This ensures that you always have a clear API to use to mass import data.
    Although we wouldnu2019t recommend doing any kind of mass data load via the user interface any longer - eCATT will be supported for automated testing of Web Dynpro ABAP applications as of NetWeaver 7.0 Enhancement Package 2.

  • Running an ABAP Query with transaction gives error!

    The queries are there (only in production systems), from PHX. When the queries are started from SQ00 they work.
    *The question is, if this has to be done for every single query*?

    Hi,
    When we upgraded, we had only few queries to be generated. Not all the queries were required to be generated...
    Hence would depend on case to case..Better regenerate the query. This is similar to activation. Hence will not be an issues for already generated queries.
    Hope this helps
    Regards
    Shiva

  • Is it possible to run a deskjet 350cbi with win7?

    hi, i am trying to use my old portable deskjet 350 cbi  with my laptop the os is win7 and via a IR connection, is their a driver available or is their a work around  any advice please.

    The only Windows 7 driver for the 350cbi is built into Windows 7. It is listed as USB connectivity only.  If you can get Windows 7 to recognize the printer as an IR device, it may be possible. This document may offer some help as far as the IrDA setup is concerned:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=bpd07675&cc=us&dlc=en&lc=en&jumpid=reg_r1002_use...
    Just a thought, but I have heard of people using a USB to parallel printer cable.
    007OHMSS
    I was a support engineer for HP.
    If the advice resolved the situation, please mark it as a solution. Thank you.

  • Sub query with conditions

    Hi,
    Is it possible to run a sub query with conditions? I keep receiving an error 'Registration Data' -2006.
    For example, here is a simplified query which gives the error...
    SELECT T1.CardCode FROM
    SELECT T0.CardCode FROM OCRD T0 WHERE T0.CardCode = '[%0]'
    ) T1
    FOR BROWSE
    Thanks for any help,
    Robin

    SBO SQL-parser sometimes kidding. My solution is to use temptables/views/storedprocedures.
    It's faster then "unbugging" parser <b>:)</b>
    in your case that can be like the following:
    SELECT T0.CardCode INTO #temp FROM OCRD T0 WHERE T0.CardCode = N'[%0]'
    SELECT qq.CardCode FROM #temp qq FOR BROWSE
    BTW: registration data error is usially says us about %-argument reason

  • Problem for running Update query with Chinese

    Hi all,
    I am running a web application in Lotus Domino.
    I have a Lotus Script Agent which need to update Oracle 8i Database with Chinese Character throught ODBC but i find that all characters become some strange characters.
    I got the problem only for update query.
    I have no problem for select query for getting the chinese data.
    Also, I got no problem to run the update query with chinese characters in Sqlplus.
    I also try to run the same update query which the ODBC connection is pointing to an MS Access Database. It works too.
    So the only things i leave is the Oracle ODBC driver.
    Anythings I should do for the Oracle ODBC server?
    Thanks very much.

    Hi, I checked the registry of Oracle and
    in the NLS_LANG field, the values is AMERICAN_AMERICA.UTF8. In the server side, I set the same.
    It should be okay, as i can retrieve the chinese content in the Oracle. Just that when i try to run a query contain chinese, such as,
    "insert into TableA values ('���')". i will got some strange character inserted in the databasae.
    Could you tell me what should i do?
    Thanks a lot a lot.

  • Operations Manager failed to run a WMI query -Access Denied

    v hosts to 2012 r2, and now we're seeing a lot of "Operations Manager failed to run a WMI Query", With "Object enumeration failed".
    Query: 'SELECT Name, State FROM MSCLUSTER_NetworkInterface where Name="our host name
    - Management"' HRESULT: 0x80070005 Details: Access is denied.
    Our Cluster run-as account is local admin on the hosts beeing monitored.
    We've tried rebuilding the WMI database following this procedure:
    1. Disable and stop the WMI service.
         sc config winmgmt start= disabled
         net stop winmgmt
    2. Run the following commands.
         Winmgmt /salvagerepository %windir%\System32\wbem      (I noticed that you have run this command, but I would suggest
    that you try it again)
         Winmgmt /resetrepository %windir%\System32\wbem
    4. Re-enable the WMI service and then reboot the server to see how it goes.
         sc config winmgmt start= auto
    If the problem remains, then try the following steps to rebuild the repository:
    1. Disable and stop the WMI service.
         sc config winmgmt start= disabled     (note that there is a blank between '=' and 'disabled')
         net stop winmgmt
    2. Rename the repository folder (located at %windir%\System32\wbem\repository) to repository.old.
    3. Re-enable the WMI service.
         sc config winmgmt start= auto
    4. Reboot the server to see if the problem remains.
    but we've had no Luck so far. Any help would be
    appreciated!
    Regards,
    Torbjørn

    Have you checked if DCOM is enabled, WMI will not be able to connect if its disabled.
    Use the steps below to configure DCOM.
    Run dcomcnfg.exe
    Double-click Component Services
    Double-click Computers
    Right-click My Computer
    Select Properties
    Select Default Properties tab
    Ensure the "Enable Distributed COM on this computer" checkbox is checked
    Default Authentication Level: Connect
    Default Impersonation Level: Identify
    Next:
    Click on COM Security tab
    Click Edit Limits under "Launch and Acitvate Permissions"
    Make sure Remote Launch and Activation permissions are enabled for the Administrators group
    Hope this helps
    -Adrian

  • Running OC4J as a Windows service

    Hi
    Does anyone know if it is possible to run OC4J as a Windows service?
    Are there any tools I could use besides Microsoft’s SVRANY?
    Best regards
    Ole

    &gt; Hi
    &gt;
    &gt; Does anyone know if it is possible to run OC4J as a
    &gt; Windows service?
    &gt;
    &gt; Are there any tools I could use besides Microsoft’s
    &gt; SVRANY?
    &gt;
    &gt; Best regards
    &gt; Ole
    Hi
    We have found the product for the job. If anyone have the same problem, you can find the program Service+ at nicoware.net
    It is running OC4J as a service very well. It even logs console output to a text file. We are now using it in our production system.
    Ole

  • SPARQL query with OPTIONAL

    Hi,
    When I run a SPARQL query with OPTIONAL in the WHERE clause, I saw a lot of "select 1 from ***" kind of queries got executed. The query runs very slow. I'm running Jena adaptor 2 against Oracle 11.1.0.6. We have about half million triples in the model. The queries we need to run tend to be complex and they run pretty slow. Does Oracle 11.1.0.7 have big query performance improvement over 11.1.0.6? Is there anything that we can do on the application side or on the database side to boost the query performance? Thanks,
    Weihua

    Native database support for OPTIONAL in SEM_MATCH based RDF query has been made available via patch 7600122 on 11.1.0.7. Direct use of SEM_MATCH to query your data from SQL has significant performance benefits.

  • ORA-03113 in spatial query with xmlReader

    I run a spatial query with xmlReader. but it occurs a ORA-03113 exception. If i use the OracleDataReader,not through xml, the execution is ok. But i have to get the geometry data through xml. I have try to set the validate connection to True, but it seems useless.
    Can some one help me?Thx a lots.
    Here is my code:
         string id = "scott";
         string psw = "tiger";
         string source = "Oracle";
         string connectionstring = "User Id="+id+";password="+psw+";data source="+source+";validate connection=true";
         string sql ="select cname from L218 where sdo_relate(L218.GEOLOC,MDSYS.SDO_geometry(2003,NULL,NULL,MDSYS.SDO_elem_info_array(1,1003,3),MDSYS.SDO_ordinate_array(295596.60260187,2761786.9958782, 316370.598147679,2789383.2780762)),'mask=anyinteract')='TRUE'";
         try
              Oracle.DataAccess.Client.OracleConnection con = new OracleConnection(connectionstring);
              con.Open();
              Oracle.DataAccess.Client.OracleCommand cmd = con.CreateCommand();
              cmd.XmlCommandType = OracleXmlCommandType.Query;
              cmd.BindByName = true;
              cmd.CommandText =sql;
              XmlReader xmlReader = cmd.ExecuteXmlReader();
              XmlDocument xmlDocument = new XmlDocument();
              xmlDocument.PreserveWhitespace = false;
              xmlDocument.Load(xmlReader);
              Console.WriteLine(xmlDocument.OuterXml);
              con.Close();
         catch (OracleException e)
              Console.WriteLine(e);
    And it returns:
    Oracle.DataAccess.Client.OracleException ORA-03113: end-of-file on communication
    channel at Oracle.DataAccess.Client.OracleCommand.XmlHandleException(OracleE
    xception e)
    at Oracle.DataAccess.Client.OracleCommand.ExecuteXmlQuery(Boolean wantResult)
    at Oracle.DataAccess.Client.OracleCommand.ExecuteXmlReader()

    Hi Daniel
    I ran the validation and some of the geometries were invalid. I have now corrected these and all are OK. The db version is 817. However, I am still getting the same error. It appears to be dependant on what cordinates the query is searching:
    Errors
    SELECT 1
    FROM wpe_misc_site, WPE_PLAN_APPLICATION
    WHERE wpe_misc_site.ste_id > 0
    AND WPE_PLAN_APPLICATION.APL_ste_id(+) =
    wpe_misc_site.ste_id
    AND mdsys.sdo_relate(ste_geometry,
    MDSYS.SDO_GEOMETRY(2003, 81989, NULL,
    MDSYS.SDO_ELEM_INFO_ARRAY(1,1003,3),
    MDSYS.SDO_ORDINATE_ARRAY(278792,187310,278876,187393)),
    'mask=anyinteract querytype=window') = 'TRUE';
    Substriute those coordinates for 278792,187308,278876,187393 and query works.
    Any ideas??
    Thanks
    Chris

Maybe you are looking for