Is it possible to Run VM Server and VM Manager on a single machine

Hi,
I'm trying to learn VM and I downloaded both the VM Server and Manager from E-Delivery. The guide says I need two separate machines for the VM server and VM manager.
Does this mean I've to install the VM Server first and then Install VM Manager on a different machine, create the Virtual Machines and then run the Virtual Machines on the VM Server?
If I've got only one laptop, does that mean I've to install the Enterprise Linux first, install the VM Manager, create all the VM Machines I'll need from the Installation sources, then install the VM Server on the machine a fresh and run the created VM Machines on it?
I'm relatively new to Virtualization and any help would be highly appreciated.
dula

There are other messages about running OVMM in the first VM on an OVM Server.
Yes, Oracle supports them both being on the same physical system. They even supply a template for it.
I tried to install it yesterday, but hit a resource snag. The testbed system I have available only has 2GB of memory and the OVMM template installation script aborts if the OVM Server does not have more than 2GB of memory. So my experiments for a faster DR process will have to wait for better hardware.

Similar Messages

newbie Possibility to run X Server and Tiger both

Hi there I have a question about the following:
I want to install Oracle on my iBook G4 but unfortunaltely there seems only a possibilty for this by installing X server. Currently I have tiger and it is working just fine I do not need to have x server as main operating system because tiger is sufficient to me. My question is if there is any possibility that you can install X server and tiger both and choose which one to use when starting up. If so how do I have to do this and is it wise to do it or not?
If it it not possible does anyone know if there is a possibility to install Oracle on my G4? I have a wireless home network with only one Mac (iBook G4) and that’s it .
Well thank you in advance.
Scotia

It all depends on the size of your data on the Mac os X client setup .. tiger server can sure cohabit with mac os x client ... but first you will need to backup everything on an external drive using Carbon Copy Cloner boot off your external hard drive , split your partition on the internal hard drive then back your macos x client down to your hard drive then install mac os x server on the secondary partition of your internal hard drive ...
Hoping this helps
PS: you can install mac os x server over a mac os X client installation but make SURE you backup your original installation and are ready to face a few updates. If possible try to get your hands on a copy of mac os x server 10.4.8 Universal.

Is it possible to run a server cluster with Mavericks?

Is it possible to run a server cluster, like using XGrid, but with Mavericks? I have a Mac Mini server and an older iMac lying around that I want to put to good use. If so, what software would I need and how should I set it up? Will I be able to link the 2 computers over Wifi or must it be Ethernet?

Sadly Apple no longer provide Xgrid for clustering it was last available with Lion aka. 10.7.x.
For any equivalent clustering capability you are either going to have to use an open-source Linux originated clustering solution like Slurm, Moab, or Beowulf. Then you have to applications written to be compatible with such solutions. This was the beauty of Xgrid in that it provided a framework that Mac applications could be compatible with.
Note: Clustering is not the same thing as a Storage Area Network. It is still possible to build a SAN using Macs even in Mavericks and Apple still support Xsan for this.
With regards to using WiFi or Ethernet, both would work but it will depend on how much data needs to be transferred (per second) as to wether WiFi would be up to the job, some tasks require lots of data to be transferred other tasks e.g. BitCoin mining do not.
Apple did come up with another framework called Grand Central Dispatch. In theory that might be extended to work in a cluster. However while GCD is now open-source I get the impression it is also abandoned by Apple See https://libdispatch.macosforge.org

Is it possible to run an iPhone and an iPod off of one iTunes account?

Is it possible to run an iPhone and an iPod off of one iTunes account? I want to buy an iPhone but I also want to use my Ipod Touch

NyVetteGuy wrote:
As a clarification, you can have up to 5 devices with iTunes.
Sorry, this is incorrect. The limit of 5 relates to the number of computers you can authorize to use iTunes, NOT the number of iOS devices you can sync with a single iTunes library. You can sync as many iOS devices as you like to iTunes. See whitewater2's post below... he is syncing at least 6 iOS devices with the same iTunes library.

1 NodeManager, 1 Admin Server and 2 Managed Servers

Hi All, I'm new in Weblogic and this is my 1st time to post a question on this forum. Would like ask for help from you all above my setup, I'm not sure whether it will work or not. Please find out the scenario below:
Setup:
1 Machine (RedHat Enterprise Linux 5.5)
1 NodeManager
1 AdminServer (Name: APP)
2 Managed Servers (Name: APPLIVE, APPUAT)
Currently I would like to using one NodeManager to control both Managed Servers under 1 machine. When I configure my APP Admin Server and two Managed Servers, i would like to nmEnroll both Managed Servers under one NodeManager but it will overwrite my enroll entries if i enroll 2nd Managed Server.
Is it possible to configure NodeManager to accept both Managed Servers entries? Thanks. :)
Edited by: user13602952 on Jan 2, 2011 9:54 PM

Hi Hong,
Following are the few things which you help you understand about NodeManager and nmEnroll
- First of all a Node Manager process is not associated with a specific WebLogic domain but with a machine
- When you run a nmEnroll then you just give "domainDir" and "nmHome" which would then gets the file called "*nm_password.properties*" which contains the encrypted username and password that is used for server authentication and "*SerializedSystemIni.dat*" file.
Example:
nmEnroll([domainDir], [nmHome])
- With above files it also updates the nodemanager.domains file with the domain information which was mentioned in the above command.
Thus when you run the nmEnroll command it would get all the details which it needs to start any managed servers in the same Machine, hence you do not need to run the same commend for each managed servers in the same Machine.
For more information have a look at the below links:
Topic: Search for "nmEnroll"
http://download.oracle.com/docs/cd/E13222_01/wls/docs92/config_scripting/reference.html
Topic: Overview of Node Manager
http://download.oracle.com/docs/cd/E13222_01/wls/docs90/server_start/nodemgr.html#1091317
Regards,
Ravish Mody
http://middlewaremagic.com/weblogic/
Come, Join Us and Experience The Magic…

Recommended configuration for Oracle VM Server and VM Manager

Hi,
Currently we have two dedicated DELL servers (VM server and VM Manager) for which are building an Oracle stack environment.
We are facing a problem which we didn't find answer from Oracle docs or via Google. The problem is that the virtual machines we create in VM Manager can't be connected to the outside world, and we think it's because our host (Hetzner) does not allow ports eth1-eth3 to be connected to the servers, unless we have these servers in the same rack and connected via switch.
Our question is, is it recommended configuration to have VM Server and VM Manager servers in the same rack and connected via switch?
If yes, the next question is, if we need in the future to add one more dedicated DELL server to our configuration to host virtual machines, is it possible if the new third dedicated DELL server is not connected via switch to the two dedicated DELL servers we have already have?
If no, the next question is, what could be the recommended configuration and solution to our problem in our case that ports eth1-eth3 cannot be connected to the servers?
Please do not hesitate to ask if you need more information. I do appreciate your time and expertise. Thanks.

The architectural environment is now done like on this graphic. For security reasons Hetzner hosting service does not allow ports eth1-eth3 to be connected, but in internal network under switch they do.

HT1338 XSERVE 10.6.8 is running very slow, and Workgroup Manager is not responding

XSERVE 10.6.8 is running very slow, and Workgroup Manager is not responding. There is no more updates to download.

munish khanna wrote:
1. upgrade to lion, which should over write previous software and the reasons for it being slow.
No, you don't want to upgrade over a buggy system, Lion has issues of it's own that will only complicate matters, plus Lion is slower than Snow Leopard.
Learn all the pitfalls before you upgrade to Lion, like all your Rosetta/older programs will no longer work and more.
Leave Lion for a new hardware purchase is my advice, it's still got plenty of security and other issues.
For your performance, your likely better off replacing the hard drive with a 7,200 RPM model and maxing the RAM, download the free MacTracker to find out your specs, and OtherWorld Computing is good for videos, tools and parts.
http://eshop.macsales.com/installvideos/
2. Format the hard disc and reinstall snow leopard.
That will work, provided your data is off the machine first.
Now how do i reinstall snow leopard as it was an online purchased upgrade from leopard.
The 10.6 Snow Leopard disk that you upgraded 10.5 Leopard from actually has the full OS X 10.6 on it.
All you have to do is stick the disk in and hold the c key down while booting, use Disk Utility to erase the entire drive, quit and install 10.6.
Of course your not going to get the free iLife that came with the 10.5 grey disks, see if you can first install 10.5 with the same methods, then setup with the same user name as before, then upgrade to 10.6
I think Apple nulled booting off the 10.5 disks, but it won't hurt to try.
Another method would be to install 10.6 fresh by itself, then use the program called Pacifist to extract iLife from the 10.5 disks.
http://www.charlessoft.com/
Read here for plenty of how to's
https://discussions.apple.com/message/16276201#16276201

Is it possible to run all OS and programs on Mountain Lion?

Greetings!
I have set myself the following challenge and wondered if it was technically possible to do the following:-
On a single mid-2012 MacBook Pro (with optical drive built in) running OS 10.8.5 as the main OS and obviously totally within the law of my country I would like the ability to run:
§ Power PC applications;
§ All Mountain Lion programs;
§ Any Linux program;
§ Windows 7 or later;
Note 1: I have already purchased Mac OS Snow Leopard Server and await it's delivery…
Note 2: I am happy to buy an OEM copy of Microsoft Windows…
Note 3: Microsoft Windows is sadly a necessity due to my University not supporting anything else for it's specialist software which I require for my studies.
Note 4: I would use Ubuntu Linux
Note 5: I have absolutely no desire to ever run Mavericks at all…
Thus, I would like my MacBook Pro to simply run any program I care to use, is this realistically possible?
Please accept my apologies if this is posted in the wrong section, I was a little unsure in which community to post this.
Thank you in advance,
CK

Thank you,
I shall do just that, as soon as I've purchased an OEM of Microsoft Windows…
Is there anything I should be aware of, other than to keep a back up of everything before I start, please?

Is it possible to run sub vi and main vi at same time from startup?

Is it possible to run both my main vi and my two sub vi`s from startup, all of them continuously? I have to sub vi`s that are supposed to take in measurements from two different instruments continuously. I manage to make a program where I can open up and close the sub vi`s, but when my sub vi`s are closed, nothing is happening in them...and they start to run again when I open them...and I have to close them if my main VI is supposed to run. So the data in the chart is only from the periodes when the sub vi has been open.
Thanks in advance for your help!

I will send my labview programs. "Hovedprogram" is my main vi, "front" and "front 2" is my sub vi`s. I am also using global variables. I have already searched the discussion forum trying to find an answer to my problem, but I haven`t quite managed yet...
My sub vi`s are not connected to any instrument now, but I have inserted a sinewave-generator and a chart in "front"(my sub vi) so I am able to see that the sub vi actually stop running when i close the window.
Attachments:
front2.vi ‏17 KB
Hovedprogram.vi ‏42 KB
front.vi ‏69 KB

How to Run both UCM Server and Webcenter Portal Services on single Weblogic

Hi,
First i have installed Oracle UCM and configure it on Weblogic Server successfully. But after the installation of Webcenter Portal on same machine and Weblogic Server. UCM Server is not running it shows Forcefully shutting down error. Kindly help me i want to run both UCM and Webcenter Portal Servers on one Weblogic server.
Regards
Shaheer Badar
www.infotechinspiration.blogspot.com

Hi Shaeer,
Make sure that you dont have same port numbers on both servers.
If it then try to avoid them.
Secondly also check nodemanager log server log to verify why it went to shutdown mode.
Regards,
Kal

Running weblogic server and workshop on 2 different machines

hi all,
My computer cannot handle both the server and workshop running on it, at the same time.
1) installed weblgic server, created domain on computer A.
2) mapped the domain\source code(working in dev mode) on computer A to computer B.
3) I open up the .work file in the mapped drive from workshop on computer B.
Problem:
Computer B never completes "Scanning .. source...", very processor intensive.
Any help, very much appreciated.
Novice!

Workshop is a pig and the scanning thing spikes my CPU everytime (1.8Ghz P4 and 1G memory). Please make it better.

Different Web Server and JDK Version on the same machine

Dear All,
There's a Orion App Servevr w/ JDK1.3 that running JSP. And I
have installed the IBM websphere 5.0 SP2 w/ JDK 1.5 for another application in the same machine. When I tried to
start the orion using cmd "java -jar orion.jar" for the original application, I encountered error as
follow:
C:\orion>java -jar orion.jar
Exception in thread "main" java.lang.VerifyError: <class: com/evermind/server/ApplicationServer, method: na signature: <Ljava/lang/String;Lcom/evermind/util/ErrorHandler;>Lcom/evermind/server/ Application;> Incompatible object argument for invokespecial
Whats the possible solution? May anyone give a suggestion? Thanks
Regards

try to specify the absolute path for java such as
c:\my_java_JDK1.3\bin\java -jar orion.jar

Need help with OSx server and profile manager

I messed up my OS X server and seems like it has stopped working.
I cannot access my server remotely or locally and it shows Safari cannot connect to server.
I made mistake resetting keychain to default and all certificates were missing.I restored system.keychain from time machine but not it won't run.
System log shows
ec 30 18:31:25 mdmserver.medicalpharmacies.com certadmin[14697]: BundleManager(non-plugin calling servermgr_certs): doCommand finished reply = {
     error = <62706c69 73743030 d4010203 04050625 26582476 65727369 6f6e5824 6f626a65 63747359 24617263 68697665 72542474 6f701200 0186a0a8 07081112 1a1b1c22 55246e75 6c6cd409 0a0b0c0d 0e0f1056 4e53436f 64655a4e 53557365 72496e66 6f584e53 446f6d61 696e5624 636c6173 7311138a 80038002 80075f10 19636f6d 2e617070 6c652e73 65727665 726d6772 5f636572 7473d313 140c1517 19574e53 2e6b6579 735a4e53 2e6f626a 65637473 a1168004 a1188005 80065f10 164e534c 6f63616c 697a6564 44657363 72697074 696f6e5f 1032556e 61626c65 20746f20 66696e64 20706173 73706872 61736520 666f7220 6578706f 72746564 20707269 76617465 206b6579 d21d1e1f 205a2463 6c617373 6e616d65 5824636c 61737365 735c4e53 44696374 696f6e61 7279a21f 21584e53 4f626a65 6374d21d 1e232457 4e534572 726f72a2 23215f10 0f4e534b 65796564 41726368 69766572 d1272854 726f6f74 80010008 0011001a 0023002d 00320037 00400046 004f0056 0061006a 00710074 00760078 007a0096 009d00a5 00b000b2 00b400b6 00b800ba 00d30108 010d0118 0121012e 0131013a 013f0147 014a015c 015f0164 00000000 00000201 00000000 00000029 00000000 00000000 00000000 00000166>;
     errorCode = 5002;
     errorDescription = "Unable to find passphrase for exported private key";
Dec 30 18:31:25 mdmserver com.apple.xpc.launchd[1] (org.apache.httpd[14695]): Service exited with abnormal code: 1
Dec 30 18:31:25 mdmserver com.apple.xpc.launchd[1] (org.apache.httpd): Service only ran for 0 seconds. Pushing respawn out by 10 seconds.

Hi!
Do you have a time machine backup? What you can try to do is a full restore on a testmachine or a VM and export the old keychain and import it into your broken server:
Passwords:
http://www.icreatemagazine.com/tips/os-x-tutorial-how-to-transfer-keychain-data- between-macs/
Certs:
https://www.racf.bnl.gov/docs/howto/grid/osxcertmgmt
Good luck!

Oracle HTTP Server and Node Manager

Hi,
I installed Oracle HTTP Server with Node Manager. I set "CrashRecoveryEnabled=true" in the nodemanager.properties. It works fine when I reboot the machine, but when I kill the root process (kill -9), the new process can not be started as the previous process does not have enough time to die and still uses the ports. I tried to run "nmGenBootStartupProps" in wlst, or set the
RestartMax=2
RestartDelaySeconds=5
variables in "[domain_name]/servers/[server_name]/data/nodemanager/startup.properties" - no success.
Any ideas, how to set the number of retries and the delay between restarts?
Versions:
Oracle HTTP Server: version="12.1.3.0.0"
java version "1.7.0_79"
OHS log:
[2015-05-04T11:43:48.0653+02:00] [OHS] [NOTIFICATION:16] [OHS-9999] [mod_weblogic.c] [host_id: dev-oep-soalb-1] [host_addr: 192.168.0.226] [pid: 18651] [tid: 140166670751552] [user: app] [VirtualHost: main] WebLogic Server Plugin version 12.1.3 <WLSPLUGINS_12.1.3.0.0_LINUX.X64_140421.1459>
[2015-05-04T11:43:48.0854+02:00] [OHS] [NOTIFICATION:16] [OHS-9999] [core.c] [host_id: dev-oep-soalb-1] [host_addr: 192.168.0.226] [pid: 18651] [tid: 140166670751552] [user: app] [VirtualHost: main] Oracle-HTTP-Server-12c/12.1.3.0.0 (Unix) mod_ssl/12.1.3.0.0 OtherSSL/0.0.0 mod_plsql/11.1.1.0.0 configured -- resuming normal operations
[2015-05-04T11:48:53.9584+02:00] [OHS] [INCIDENT_ERROR:32] [OHS-9999] [worker.c] [host_id: dev-oep-soalb-1] [host_addr: 192.168.0.226] [pid: 18838] [tid: 140103489120064] [user: app] [VirtualHost: main] (98)Address already in use: make_sock: could not bind to address 192.168.0.226:80
[2015-05-04T11:48:53.9585+02:00] [OHS] [INCIDENT_ERROR:20] [OHS-9999] [worker.c] [host_id: dev-oep-soalb-1] [host_addr: 192.168.0.226] [pid: 18838] [tid: 140103489120064] [user: app] [VirtualHost: main] no listening sockets available, shutting down
[2015-05-04T11:48:53.9585+02:00] [OHS] [ERROR:32] [OHS-9999] [core.c] [host_id: dev-oep-soalb-1] [host_addr: 192.168.0.226] [pid: 18838] [tid: 140103489120064] [user: app] [VirtualHost: main] Unable to open logs
Node Manager log:
<May 4, 2015 11:37:50 AM CEST> <INFO> <Loading domains file: /opt/app/soalb_domain/nodemanager/nodemanager.domains>
<May 4, 2015 11:40:18 AM CEST> <INFO> <Loading identity key store: FileName=/opt/app/soalb_domain/security/DemoIdentity.jks, Type=jks, PassPhraseUsed=true>
<May 4, 2015 11:40:18 AM CEST> <INFO> <Loaded NodeManager configuration properties from '/opt/app/soalb_domain/nodemanager/nodemanager.properties'>
<May 4, 2015 11:40:18 AM CEST> <INFO> <Node manager v12.1.3 #1604337>
<May 4, 2015 11:40:18 AM CEST> <INFO> <soalb_domain> <soalb_server1> <Startup configuration properties loaded from "/opt/app/soalb_domain/servers/soalb_server1/data/nodemanager/startup.properties">
<May 4, 2015 11:40:19 AM CEST> <INFO> <Secure socket listener started on port 5556, host localhost/127.0.0.1>
<May 4, 2015 11:43:53 AM CEST> <INFO> <soalb_domain> <soalb_server1> <The server 'soalb_server1' is running now.>
<May 4, 2015 11:48:53 AM CEST> <INFO> <soalb_domain> <soalb_server1> <The server 'soalb_server1' with process id 18672 is no longer alive; waiting for the process to die.>
<May 4, 2015 11:48:53 AM CEST> <INFO> <soalb_domain> <soalb_server1> <Server failed so attempting to restart (restart count = 1)>
<May 4, 2015 11:48:54 AM CEST> <SEVERE> <soalb_domain> <soalb_server1> <Unexpected error while monitoring server>
java.io.IOException: Failed to start the server soalb_server1
Check log file /opt/app/soalb_domain/system_components/OHS/ohs_nm.log
Check log file /opt/app/soalb_domain/servers/soalb_server1/logs/soalb_server1.log
        at oracle.ohs.plugin.nodemanager.OhsProcessManagementPlugin$ProcessImpl.buildIoException(Unknown Source)
        at oracle.ohs.plugin.nodemanager.OhsProcessManagementPlugin$ProcessImpl.start(Unknown Source)
        at weblogic.nodemanager.server.DecoratedSystemComponentManager$DecoratedProcess.start(DecoratedSystemComponentManager.java:129)
        at weblogic.nodemanager.server.ServerMonitor.startProcess(ServerMonitor.java:441)
        at weblogic.nodemanager.server.ServerMonitor.runMonitor(ServerMonitor.java:406)
        at weblogic.nodemanager.server.ServerMonitor.run(ServerMonitor.java:295)
        at java.lang.Thread.run(Thread.java:744)
ohs_nm.log:
<2015-05-04 11:48:53> <INFO> <OHS-0> <The server 'soalb_server1' with process id 18672 is no longer alive; waiting for the process to die.>
<2015-05-04 11:48:53> <INFO> <OHS-0> <Server failed so attempting to restart (restart count = 1)>
<2015-05-04 11:48:53> <INFO> <OHS-4018> <Starting server soalb_server1>
<2015-05-04 11:48:53> <INFO> <OHS-0> <Running /opt/app/ohs12c/wlserver/../ohs/bin/httpd.sh httpd.worker -k start -f /opt/app/soalb_domain/config/fmwconfig/components/OHS/instances/soalb_server1/httpd.conf>
<2015-05-04 11:48:53> <INFO> <OHS-0> <[Mon May 04 11:48:53 2015] [warn] Errors will be logged into /opt/app/soalb_domain/servers/soalb_server1/logs/soalb_server1.log>
<2015-05-04 11:48:54> <INFO> <OHS-0> </opt/app/ohs12c/wlserver/../ohs/bin/httpd.sh httpd.worker -k start -f /opt/app/soalb_domain/config/fmwconfig/components/OHS/instances/soalb_server1/httpd.conf: exit status = 1>
<2015-05-04 11:48:54> <INFO> <OHS-4005> <Check the instance log file for more information: /opt/app/soalb_domain/servers/soalb_server1/logs/soalb_server1.log>
<2015-05-04 11:48:54> <SEVERE> <OHS-0> <Failed to start the server soalb_server1>
<2015-05-04 11:48:54> <SEVERE> <OHS-0> <Unexpected error while monitoring server>
Node Manager properties:
#Wed Apr 29 18:31:26 CEST 2015
#Node manager properties
#Wed Apr 29 17:18:21 CEST 2015
DomainsFile=/opt/app/soalb_domain/nodemanager/nodemanager.domains
LogLimit=0
PropertiesVersion=12.1.3
AuthenticationEnabled=true
NodeManagerHome=/opt/app/soalb_domain/nodemanager
JavaHome=/opt/app/jdk1.7.0_79
LogLevel=INFO
DomainsFileEnabled=true
StartScriptName=startWebLogic.sh
ListenAddress=localhost
NativeVersionEnabled=true
ListenPort=5556
LogToStderr=true
SecureListener=true
LogCount=1
StopScriptEnabled=false
QuitEnabled=false
LogAppend=true
StateCheckInterval=5000
CrashRecoveryEnabled=true
StartScriptEnabled=true
LogFile=/opt/app/soalb_domain/nodemanager/nodemanager.log
LogFormatter=weblogic.nodemanager.server.LogFormatter
ListenBacklog=50
Startup properties:
#SSLArguments=-Dweblogic.security.SSL.ignoreHostnameVerification\=false -Dweblogic.ReverseDNSAllowed\=false
RestartMax=2
RestartDelaySeconds=5
FileTimeSpan=24
RestartInterval=3600
FileTimeSpanFactor=3600000
RotatedFileCount=7
RotationType=bySize
#AdminURL=http\://192.168.0.224\:7001
NumberOfFilesLimited=true
AutoRestart=true
RotationTimeStart=00\:00
FileSizeKB=500
Regards,
András

To deploy your FMX you need AS 10.1.2 Forms installed, and then you can use AS control or Forms server configuration file.
For more information regarding FMX deployment, refer to http://download.oracle.com/docs/cd/B14099_19/web.1012/b14032/toc.htm
Regards,
Preet

Running Oracle XE and Oracle enterprise on same windows machine

Hi,
I never had to try anything similar to this on windows. I need to continue to run Oracle Enterprise edition and Oracle XE on my windows machine.
I can install both, but when I try to run the Listener for XE Edition, it starts the listener for the enterprise edition.
Also the DB Homepage doesnt work, which leads me to believe that it might be using some fo the enterprise files, not the XE files.
I cant access the XE forum, because I cant register, so sorry for posting this here. I cant seem to find a place that mentions or explains how you can run both on a Windows box.
I have run multiple oracle versions on Unix, just never on windows...

On the windows case, the order of evaluation is taken from the PATH environment variable. This same rule applies when you have several Oracle products installed on the same box, ensure you are launching a tool that makes sense with its home, i.e. launching netca to configure a tnsentry at the XE home will not work since XE doesn't have a netca tool and the tnsora file it will be modifying will be that of the oracle home it is related to. On the other hand, when lauching sqlplus it would not be too dangerous since any compatible version of sqlplus will work.
There are issues with the listener, Oracle XE requires to be registered against the listener, additionally it will create an OraDAV access (http protocol) to open the access to the Web Administration Console. If you are planning to use web/plsql application this is also important. It can work with the other listener, but depending on your particular conditions you may want to start an independent listener for XE.
~ Madrid

Is it possible to Run VM Server and VM Manager on a single machine

Similar Messages

Maybe you are looking for